The earth has a mass of, MEarth=6.4 X 1024 kg and a radius of REarth= 6.0 X 106meter and it has acceleration due to gravity, gE = 9.8 . One of Jupiter’s moon also has MJmoon = ½ * MEarth =3.2 x 1024 kg with a radius of, RJmoon = ½ * REarth =3.0 x 106 m and gJmoon value unknown. From the information, what is acceleration due to gravity of Jupiter’s moon, gjmoon, comparing to the earth’s acceleration due to gravity, gEarth?

A VfL (Vertical Field LED) backlighting system is commonly used in LCD (Liquid Crystal Display) televisions.

LCD TVs rely on a backlight to illuminate the liquid crystal layer, which controls the passage of light to create the visual image. The VfL technology is a specific type of LED backlighting arrangement used in certain LCD TV models. In a VfL backlighting system, the LEDs (Light-Emitting Diodes) are positioned vertically along the edges of the LCD panel.

The light emitted by these LEDs is directed across the panel using light guides or optical films, illuminating the liquid crystal layer uniformly. One advantage of VfL backlighting is its ability to provide consistent illumination across the LCD panel, reducing any potential inconsistencies in brightness or color uniformity. The vertical orientation of the LEDs allows for more precise control over light distribution, improving overall image quality.

Additionally, VfL backlighting offers potential advantages in terms of power efficiency. By selectively dimming or turning off specific zones of LEDs, local dimming techniques can be employed to enhance contrast and black levels, resulting in improved picture quality while conserving energy. It's important to note that VfL backlighting is just one of several backlighting technologies available for LCD TVs.

know more about Liquid Crystal Display here:

https://brainly.com/question/30047287

#SPJ8

Endarterectomy is used to reduce the risk of stroke and correct the stenosis in the artery.

The primary blood vessels that supply the brain with blood and oxygen are the carotid arteries.

The narrowing of these arteries is referred to as carotid artery disease. Carotid artery stenosis is another name for it. The main factor causing constriction is atherosclerosis.

This fat deposit reduces the blood flow to the brain which cause a stroke.

Carotid endarterectomy is a surgical treatment to remove plaque, an accumulation of fatty deposits that causes a carotid artery to become narrowed.

Hence, an Endarterectomy is used to reduce the risk of stroke, it will correct stenosis in the artery.

For a detailed study about coronary artery disease refer given link https://brainly.com/question/1347334.

#SPJ1.

Elements combine to form compounds. The correct answer is A.

Elements combine with each other in chemical reactions to form compounds. A compound is a substance composed of two or more different elements chemically combined in a fixed ratio by mass. For example, water is a compound composed of hydrogen and oxygen in a fixed ratio of 2:1 by mass.

B. Molecules are formed when two or more atoms combine chemically, but these atoms can be of the same element or different elements. For example, oxygen gas (O2) is a molecule composed of two oxygen atoms.

C. Atoms are the smallest unit of matter that retains the properties of an element. Atoms do not combine to form other atoms or compounds.

D. Mixtures are composed of two or more substances physically mixed together, but the substances retain their individual properties and can be separated by physical means. Mixtures are not formed by the chemical combination of elements. Examples of mixtures include air and saltwater.

Therefore, The correct answer is option A.

To learn more about the type of solution click:

brainly.com/question/30239692

#SPJ1

Yes, the force of the engine does work on the car as it accelerates the car forward. Work is defined as the transfer of energy that occurs when a force is applied over a distance, and in this case, the force of the engine is causing the car to move, so it is doing work.

As the car gains speed, its kinetic energy increases, which means it has more energy of motion. Kinetic energy is defined as one-half of the mass of an object times its velocity squared, so as the car's speed increases, so does its kinetic energy.

The gravitational potential energy of the car will remain constant as long as it stays on a horizontal road, assuming there is no change in elevation. Gravitational potential energy is the energy an object possesses due to its position in a gravitational field, and since the car's position relative to the ground is not changing, its gravitational potential energy will remain constant.

The tractive force of the engine may change depending on the speed of the car and the resistance to motion that the car is encountering. As the car speeds up, the air resistance acting on the car will increase, which will require more force from the engine to maintain the same acceleration. Additionally, if the road surface is rough or there are inclines, the tractive force required to maintain the same speed or acceleration will also increase.

Learn more about force on

https://brainly.com/question/12970081

#SPJ1

Answer:

Explanation:

1a) x = 50(0) + 50(10) + 50(20) / 3(50) = 10 cm

    y = 50(0) + 50(0) + 50(20sin60) / 3(50) = (10/3)√3 cm

(10, (10/3)√3)

1b) I = 0.050(0²) + 0.050(.20²) + 0.050(.20²) = 0.004 kg•m²

1c) distance of each mass from the CM is

d² = 10² + ((10/3)√3)²

d² = 100 + ((100/9)3)

d² = 100 + 100/3

d² = 400/3 cm² = 0.04/3 m²

I = 3(0.050)(0.04/3) = 0.002 kg•m²

1)a) Pressure is the force exerted per unit area, measured in units such as pascals (Pa) or pounds per square inch (psi).

b) The value of standard atmospheric pressure is approximately 101.3 kilopascals (kPa) or 1 atmosphere (atm).

c) One application of liquid pressure in our daily life is in hydraulic systems, like car brakes, where liquid pressure is used to transmit force and amplify it.

d) The instruments used to measure the pressure of compressed air include pressure gauges or manometers.

e) An instrument called a barometer is used to measure atmospheric pressure.

f) The unit of compressed air is typically measured in pounds per square inch (psi) or pascals (Pa).

g) Standard atmospheric pressure is the pressure exerted by the Earth's atmosphere at sea level. It is approximately equal to 1 atm or 101.3 kPa.

h) The property of liquid that is applicable in water supply systems in cities is its ability to flow and exert pressure, allowing water to be distributed through pipes and reach different levels in buildings.

i) The property of liquid that supports its use in hydraulic machines is its incompressibility, allowing it to transmit force and energy effectively.

2) a)Atmospheric pressure is the force exerted by the weight of the Earth's atmosphere on a surface.

b) The equation P = dgh. This equation can be derived by considering the weight of the fluid column and the force it exerts on a unit area at the base.

c) A mercury barometer consists of a glass tube filled with mercury, inverted into a dish of mercury. The mercury in the tube adjusts its height based on the atmospheric pressure.

d) The importance of atmospheric pressure can be seen in its role in weather patterns, maintaining the balance of gases in the atmosphere, and facilitating breathing for humans and animals.

e) Applications of liquid pressure include hydraulic systems in machinery, such as lifts and cranes, hydraulic brakes in vehicles, and water towers for maintaining water pressure in buildings.

f) Events in daily life directly related to pressure include inflating a balloon, using a bicycle pump to inflate tires, and squeezing toothpaste out of a tube.

1)a) Pressure is defined as the force per unit area. Its unit in the S.I system is newtons per square meter (N/m²) or Pascal (Pa).

b) The value of standard atmospheric pressure at sea level is 101.3 kPa (kilopascals) or 1 atm (atmosphere). c) Liquid pressure has numerous applications in our daily life, but one of the most common ones is the hydraulic braking system used in cars.

d) An instrument used to measure the pressure of compressed air is called a pressure gauge. e) An instrument used to measure atmospheric pressure is called a barometer.

f) The unit of compressed air is generally psi (pounds per square inch).

g) Standard atmospheric pressure is the pressure exerted by the atmosphere at sea level and is equal to 101.3 kPa or 1 atm.

h) The property of liquids that is applicable in water supply systems in cities is their incompressibility. i) The property of liquids that supports their use in hydraulic machines is their incompressibility.

2)a) Atmospheric pressure is defined as the force per unit area exerted by the weight of the atmosphere on the surface. It is proven with the help of the following activity: Take a glass full of water and place a cardboard over it. Hold the cardboard tight and invert the glass. The water will not spill out of the glass, which is because the atmospheric pressure is greater on the cardboard than the pressure inside the glass.

b) The pressure exerted by a fluid can be derived using P = dgh, where P is the pressure, d is the density, g is the acceleration due to gravity, and h is the height of the fluid column.

c) A mercury barometer is made up of a glass tube that is closed at one end and filled with mercury. The tube is inverted and placed in a container of mercury. The pressure of the atmosphere on the open surface of the container forces the mercury in the tube to rise to a height that is proportional to the atmospheric pressure.

d) The importance of atmospheric pressure can be explained by the following points: it enables breathing, regulates the weather, and causes the ocean tides.

e) Some applications of liquid pressure include hydraulic brakes in cars, hydraulic lifts, and hydraulic jacks.

f) Some events that are directly related to pressure include gas escaping from a pressurized container, balloons being inflated, and soda cans being opened.

Know more about  Pressure   here:

https://brainly.com/question/28012687

#SPJ8

Answer:

8 + 6 = 14 miles north

Explanation:

To determine the magnitude of the lift force ⃗ and the force of air resistance ⃗ acting on the jet, we need to resolve the weight ⃗ and the forward thrust ⃗ into their horizontal and vertical components.

The weight ⃗ can be resolved into two components:

- the vertical component, Wsin(30°), acting downward

- the horizontal component, Wcos(30°), acting to the left

The forward thrust ⃗ can also be resolved into two components:

- the vertical component, Tsin(30°), acting upward

- the horizontal component, Tcos(30°), acting to the right

Since the jet is flying at a constant speed, the lift force ⃗ must be equal in magnitude to the weight component acting downward, Wsin(30°). Therefore, the magnitude of ⃗ is 86,500 Nsin(30°) = 43,250 N.

The force of air resistance ⃗ is equal in magnitude to the horizontal component of the weight, Wcos(30°), minus the horizontal component of the forward thrust, Tcos(30°). Therefore, the magnitude of ⃗ is (86,500 Ncos(30°)) - (103,000 Ncos(30°)) = -8,715 N, where the negative sign indicates that the force of air resistance is acting in the opposite direction to the motion of the jet.

Therefore, the magnitude of the lift force ⃗ is 43,250 N and the magnitude of the force of air resistance ⃗ is 8,715 N.

Considering the definition of precision and accuracy, the mass readings of the digital balance are accurate but not precise.

Precision as the proximity between the indications or measured values ​​of the same measurand, obtained in repeated measurements, under specified conditions.

Accuracy is defined as the closeness between the measured value and the "true" value of the measurand.

In other words, accuracy is how close a measurement is to the true value, while precision is how close the values ​​of several measurements are to a point.

Precision and accuracy are independent of each other. Thus, the results in the values ​​of a measurement can be precise and not exact (and vice versa).

A set of 500-g masses is placed one at a time on a digital balance during quality control testing. The mass readings are 397 g, 401 g, and 403 g.

In this case, the measurement is accurate, since the results of each individual measurement are quite similar. But the measurements are not exact (not precise) because the results are far from the real value.

In summary, the mass readings of the digital balance are accurate but not precise.

Learn more about accurate and precise:

https://brainly.com/question/24842282

https://brainly.com/question/27912213

#SPJ1

Answer:

Answer: Its (B)

Explanation

Answer:

Option B

Explanation:

See angular velocity is decreasing with respect to time , angular acceleration is negative .

The slope of the graph should be angular acceleration as slope is change in y with respect to x .

Here initial velocity made twice

so y intercept or vertical intercept should go twice up wards.

The horizontal intercept will also go twice rightwards because slope or angular acceleration is constant given .

If scale is one box=1units

Remember that displacement will be doubled also

Answer:

belpw

Explanation:

The distance prior to the sliding friction dispersing her energy would be:

- The distance will remain unaffected by the sliding friction i.e. 354m

As we know, When Sliding friction dissolves her energy, leading her Kinetic Energy to turn 0 on coming to the state of rest. So,

\(1/2 mv^2 - 1/2 mu^2 = -W\)            (∵ Work in -ve denotes it is done opposite to friction)

Given that,

m(mass) \(= 50 kg\)

v(velocity) \(= 30 km/hr\) or \(8.33 m/s\)

The coefficient of Kinetic Friction \(= 0.01\)

g(gravitational force) \(= 9.8 m/s^2\)

Initial Velocity(u) \(= 30\) × \(1000/3600 m/s\)

\(= 8.33 m/s\)

Now by employing the provided values,

\(F =\) μ\(mg\)

\(= (0.01) (50) (9.8)\)

\(= 4.9\)

∵ \(F = 4.9 N\)

By using the above expression, we will find the distance;

\(1/2 mv^2 - 1/2 mu^2 = -W\)

⇒ \(1/2 (50) (0)^2 - 1/2 (50) (8.33)^2 = -4.9(S)\)

⇒ \(1734.7225 = 4.9S\)

⇒ \(S = 1734.7225/4.9\)

∵ \(S = 354 m\)

Because \(1/2 mv^2 - 1/2 mu^2 = -W\)  \(= -\) μmgS

⇒ \(S = (u^2 - v^2)\)/2μ\(g\)

Thus, the distance will remain unaffected by the sliding friction i.e. 354m

Learn more about "Friction" here:

brainly.com/question/2122951

The ball's velocity must be zero to reach the highest spot it can.

To learn more about velocity refer to:

brainly.com/question/24445340

#SPJ1

Answer: 18o degrees

Explanation:  :)

The planet should move across the sky when completing one revolution around the Sun is 180 degrees.

Planets are large, spherical celestial objects that are neither stars nor their leftovers. The nebular hypothesis, which states that an interstellar cloud collapses out of a nebula to create a young protostar orbited by a proto-planetary disk, is the best theory currently available for explaining planet formation.

More than 5,000 exoplanets, as they are known, were found as a result of further astronomical advancements. These consist of hot Jupiter's, which are enormous planets that revolve around their parent.

The steady accumulation of matter accelerated by gravity, or accretion, is how planets expand within this disk. There are at least eight planets in the Solar System, including the gigantic planets Jupiter, Saturn, Uranus, and Neptune as well as the terrestrial planets Mercury, Venus, Earth, and Mars.

Therefore, the planet should move across the sky when completing one revolution around the Sun is 180 degrees.

To know more about Planet:

https://brainly.com/question/9211822

#SPJ2

Answer:

suna bro i am nepali and nepali are pro

Answer:

Let vector C(x,y) be A-B.

Explanation:

Now the direction is given by: tan-1(y/x)

Use the correct angle on the basis in which quadrant the vector C lies.

Magnitude = sqrt(x^2 + y^2)

Answer:

Explanation:

circumference = diameter * \(\pi\)

circumference = 65 * \(\pi\)

circumference = 204.2035225m

350 km/h = 97.222222 m/s

0.4761 revolutions per second

The average power supplied to the box by friction while it slows from 13 m/s to 11.5 m/s is 3.24 W.

The acceleration of the box is calculated as follows;

vf² = vi² + 2as

a = (vf² - vi²)/2s

a = (11.5² - 13²) / (2 x 8.5)

a = -2.16 m/s²

The time taken for the box to travel is calculated as follows;

a = (vf - vi)/t

t = (vf - vi) / a

t = (11.5 - 13) / (-2.16)

t = 0.69 s

P = Fv

P = (ma)(vf - vi)

P = (1 x -2.16) x (11.5 - 13)

P = 3.24 W

Thus, the average power supplied to the box by friction while it slows from 13 m/s to 11.5 m/s is 3.24 W.

Learn more about average power here: https://brainly.com/question/19415290

#SPJ1

When displaying sections of data, bar charts is used. As long as the number of categories to compare, vertical bar charts can be useful for comparing several category discrete data, like ages, classes, schools.

Charts and graphs are useful visual aids because they make information accessible and quick to understand. So, it is not unexpected that both print and digital media frequently use graphs. When data is displayed as a graph rather than a table, it can often be easier to understand because the graph might show a pattern or comparison.

Visual representations of data, such as tables and graphs, are used to arrange information and reveal patterns and correlations. To present the results of their research, scientists and researchers frequently employ tables and graphs.

To know more about vertical visit:

https://brainly.com/question/11679227

#SPJ1

In a particular linear transformation, the directions that are flipped, compressed, or stretched are called eigenvectors.

The vast majority of libraries, including Numpy, return eigenvectors that have been scaled to have a length of 1. (called unit vectors). When x is multiplied by A, eigenvalue indicates how much x is scaled, stretched, contracted, reversible, or unaffected. At most, there are n dimensions and n eigenvalues.

An eigenvector in mathematics is equivalent to real non-zero eigenvalues that point in the direction extended by the transformation, whereas an eigenvalue is thought of as a factor by which it is stretched. The transformation's direction is reversed if the eigenvalue is negative.

Eigenvectors are the directions that a specific linear transformation flips, compresses, or stretches. The strength of the transformation in the direction of the eigenvector or the compression factor is referred to as the eigenvalue.

To learn more about eigen vectors refer to:

https://brainly.com/question/14415835

#SPJ4

Answer:

  a = F/m

Explanation:

Newton's first law tells you the horizontal acceleration will be the ratio of the net applied horizontal force to the mass of the projectile:

  a = F/m

The direction of the acceleration will be the direction of the applied force.

Answer:

O pH is a measure of the concentration of H+ ions in a solution of an acid or base. The pH plots

the concentration of solutions in a range from 0-14.

Explanation:

pH is a measure of how acidic/basic water is. The range goes from 0 to 14, with 7 being neutral.

The angular inclination of the track reaction at the wheel is 0.0922rad

It is given that the Mass of car is 100 kg and the constant speed is Speed is 108 km the Radius of circular path on which it moves is 100m. So we need to find the Angle of inclination of the circular track.

Banking of tracks (roads) is the minimum velocity with which a vehicle (in the absence of friction) can negotiate a circular road of radius r and banked at an angle θ is given by

v² = rgtan θ

We need to convert km/hr unit of velocity into m/s

We know that,

1 km/hr = 5/18 m/s

Therefore, 108 km/hr = 108 × 5/18 = 30 m/s

By substituting the values we get,

30² = 1000 × 10 × tan θ

900 = 10000 × tan θ

tan θ = 9/100

tan θ = 0.09

θ = tan‾¹ (0.09)

θ = 0.0922rad

Therefore, the angle of inclination is 0.0922rad

To know more about angular velocity, click below:

https://brainly.com/question/24158647

#SPJ9

Answer:

Hazards during late childhood

Answer:

  0.017 N

Explanation:

The relevant relation is ...

  F = GMm/r²

where G is the universal gravitational constant, 6.67408 × 10^-11 m^3·kg^-1·s^-2, M and m are the masses of the objects, and r is the distance between them.

__

Filling in the given numbers, we find the force to be ...

  F = (6.67408 × 10^-11 m^3·kg^-1·s^-2)(8.7 × 10^20 kg)(77 kg)/(1.6 × 10^7 m)^2

where m in this expression is the unit "meters".

  F = 6.67408 · 8.7 · 77/2.56 × 10^(-11 +20 -2·7) N ≈ 0.017 N

The asteroid exerts a force of about 0.017 N on Sally.

__

Additional comment

That's about 0.000023 times the force of Earth's gravity.

Answer:

hi..bro

make pinky sis answer as brinlist ok

have a good day

The average acceleration of the motorcycle over the given distance is approximately 9.39 m/s².

To calculate the average acceleration of the motorcycle, we can use the formula:

Average acceleration = (final velocity - initial velocity) / time

First, let's convert the final velocity from km/h to m/s since the distance is given in meters. We know that 1 km/h is equal to 0.2778 m/s.

Converting the final velocity:

Final velocity = 78 km/h * 0.2778 m/s = 21.67 m/s

Since the motorcycle starts from rest (initial velocity is zero), the formula becomes:

Average acceleration = (21.67 m/s - 0 m/s) / time

To find the time taken to reach this velocity, we need to use the formula for average speed:

Average speed = total distance/time

Rearranging the formula:

time = total distance / average speed

Plugging in the values:

time = 50 m / 21.67 m/s ≈ 2.31 seconds

Now we can calculate the average acceleration:

Average acceleration = (21.67 m/s - 0 m/s) / 2.31 s ≈ 9.39 m/s²

To learn more about acceleration

https://brainly.com/question/2303856

#SPJ8

Here are six things you can do to save energy or increase energy efficiency in any part of a house:

Install energy-efficient lighting and switch to LED lights from incandescent ones. While they live longer and consume up to 80% less energy than incandescent lights, LED bulbs require fewer replacements over time.

Upgrade your windows: Replace old windows with energy-efficient ones. Windows with double or triple panes, low-emissivity coatings, and insulated frames can significantly reduce heat loss in the winter and heat gain in the summer.

Install a programmable thermostat: A programmable thermostat allows you to set different temperatures for different times of the day, so you can automatically reduce heating or cooling when you're not at home or when you're sleeping.

Insulate your home: Adding insulation to walls, floors, and attics can help keep heat inside during the winter and outside during the summer, reducing your need for heating and cooling.

Upgrade to energy-efficient appliances: Energy-efficient appliances, such as refrigerators, dishwashers, and washing machines, use less energy and water than older models, which can help you save on your energy bills.

Seal air leaks: Seal air leaks around windows, doors, and other areas of your home to prevent drafts and heat loss. You can use weatherstripping, caulking, or other materials to seal gaps and cracks. This can help you save on heating and cooling costs and improve your overall energy efficiency.

Learn more about Efficiency here:

https://brainly.com/question/28939461

#SPJ1