Water is pumped down a pipeline. The feed to the pipeline is switched to honey, which has a higher viscosity. The pressure at the entrance of the pipeline will need to ____ to maintain the same volumetric flow rate.

Answer:

substance B

Explanation:

Rotational molding tends to be advantageous in situations larger parts, lower production quantities, and more complex external part geometries. Option B, B, C, and D is correct.

This is because elative to blow molding, rotational molding allows for more design flexibility and can produce larger, more complex parts with uniform wall thickness and no weld lines. It also allows for customization and can produce parts with varying shapes, textures, and colors.

While it is not as efficient for higher production quantities, it can still be used for lower production quantities and smaller parts.

Therefore, the answer is B. (b), (c), and (d).

elative to blow molding, rotational molding tends to be advantageous in which of the following situations: (a) higher production quantities, (b) larger parts, (c) lower production quantities, (d) more complex external part geometries, (e) simpler external part geometries, and (f) smaller parts?

a) (a), (b) and (d)

b) (b), (c), and (d)

c) (d), (e) and (6)

d) (b), (c), and (f)

Learn more about blow molding https://brainly.com/question/29635128

#SPJ11

In both the `PokerHand` and `BlackjackHand` classes, the following member functions must be overridden:

1. `getValue()` or `getScore()`: This function calculates and returns the value or score of the hand in the respective game (poker or blackjack).

2. `isBust()`: This function determines whether the hand has exceeded the maximum allowable value in blackjack (typically 21) and returns a boolean indicating if the hand is bust.

3. `isWinningHand()`: This function evaluates whether the hand is a winning hand based on the game rules and returns a boolean indicating the result.

These member functions need to be overridden in both classes to provide the specific behavior and logic required for each game.

Learn more about PokerHand here:

https://brainly.com/question/32466651

#SPJ11

Answer:

The answer is below

Explanation:

Given that:

\(k_t=torque\ constant=0.075\ Nm/A\\\\k_v=voltage\ constant=0.12\ V/(rad/sec)\\\\R_a=armature \ resistance=2.5 \Omega\\\\V_t=terminal\ voltage=24\ V\\\\a)The \ starting\ current\ I_a\ is\ given \ as:\\\\I_a=\frac{V_t}{R_a} =\frac{24}{2.5} =9.6\ A\\\\The \ starting\ torque(T)\ is:\\\\T=k_tI_a=0.075*9.6=0.72\ N.m\)

b) The maximum speed occurs when the terminal voltage and back emf are equal to each other i.e.

\(V_t=e_b=k_v\omega\\\\\omega=\frac{V_t}{k_v}=\frac{24}{0.12} =200\ rad/s\)

c) The load torque is given as:

\(T_L=0.0125\Omega\\\\The\ motor\ torque \ is:\\\\T=k_t(\frac{V_t-k_v\omega}{R_a} )\\\\but\ T = T_L,hence:\\\\0.0125\omega=0.075(\frac{24-0.12\omega}{2.5} )\\\\0.03125\omega=1.8-0.009\omega\\\\0.04025\omega=1.8\\\\\omega=44.72\ rad/sec\\\\N=\frac{60\omega}{2\pi} =\frac{60*44.72}{2\pi} =427\ rpm\)

Answer:

a. The rate of loss of entropy from the high-temperature reservoir is 1.2 MJ/s x (1 - 0.35) = 0.78 MJ/s, and the rate of gain of entropy by the low-temperature reservoir is 1.2 MJ/s x 0.35 = 0.42 MJ/s.

b. The work done by the engine is 1.2 MJ/s x 0.35 = 0.42 MW.

c. The total entropy gain of the system is 0.42 MJ/s x (1000 K - 308 K) = 124.8 MJ/s.

d.  = 83 MJ/s

Explanation:

Based on the use of the moral principle of Immanuel Kant and deontology, the way that the mother lie in court for the sake of love is one that is not morally justified or right.

Kant's moral philosophy is said to be one that capitalizes on the principle of universalizability, and it is one that states that we as humans need to only act based to principles that we can overtime will to be universal laws.

In conclusion, I can say that the action of the mother when she lie in court for the sake of love is very wrong and morally justified or right when viewed in Kant's moral philosophy or deontology.

Learn more about claims from

https://brainly.com/question/2748145

#SPJ1

Answer:

speed(0)

square_length = int(input("What is the length of the square?"))

def draw_square():

   pendown()

   for i in range(4):

       forward(square_length)

       left(90)

   penup()

penup()

setposition(-200, -200)

draw_square()

penup()

setposition(-200, 200 - square_length)

draw_square()

penup()

setposition(200 - square_length, 200 - square_length)

draw_square()

penup()

setposition(200 - square_length, -200)

draw_square()Explanation:

Answer:

20368.917N

Explanation:

Frictional force (F) is the product of the Coefficient of friction and the normal reaction.

F = μN

Coefficient of friction, μ = 0.2

Normal reaction = MgCosθ

Mass, m = 12 tonnes = 12 * 1000 = 12000 kg

N = 12000 * 9.8 * cos30

N = 101844.58

F = 0.2 * 101844.58

F = 20368.917N

Answer:

ee

Explanation:

This is an over the top question

The program requires a sequence control structure; First, we get input for the variables, and then use the formula to calculate the amount of calories burnt.

The program in python is as follows, where comments (in italics) are used to explain each line.

#This gets input for age, in years

age = int(input("Age (years): "))

#This gets input for weight, in pounds

weight = int(input("Weight (pounds): "))

#This gets input for heart rate, in beats per minutes

heart_rate = int(input("Heart Rate (beats per minutes): "))

#This gets input for time, in minutes

time = int(input("Time (Minutes) : "))

#This calculates the calories burnt for men

calories_man = ((age * 0.2017) - (weight * 0.09036) + (heart_rate * 0.6309) - 55.0969) * time / 4.184

#This calculates the calories burnt for women

calories_woman = ((age * 0.074) - (weight * 0.05741) + (heart_rate * 0.4472) - 20.4022 ) * time / 4.184

#This prints the calories burnt for men

print('Men: %0.2f calories' % calories_man)

#This prints the calories burnt for women

print('Women: %0.2f calories' % calories_woman)

Please note that the program does not check for valid inputs

See attachment for program output

Read more about Python programs at:

https://brainly.com/question/22841107

The answer is analyze

a. The x coordinate of the center of mass is 2.5 m.

b. The y coordinate of the center of mass is 1.5 m.

c. the reaction at the pin support A is 4.71 kN.

d.The reaction at the roller support B is 7.85 kN.

a. The moment of the mass of the rectangle is 2355 kg * 1 m = 2355 kg-m. The moment of the mass of the triangle is 2355 kg * 2 m / 3 = 1570 kg-m.

The x coordinate of the center of mass is (2355 kg-m + 1570 kg-m) / 2355 kg = 2.5 m.

b The first moment of area of the rectangle is 1 m * 1 m * 1 m = 1 m³. The first moment of area of the triangle is 1 m * 2 m * 1 m / 3 = 2/3 m³.

The y coordinate of the center of mass is (1 m³ + 2/3 m³) / 1 m² = 1.5 m.

c The moment of the force about the pin support A is 11.77 kN * 1 m = 11.77 kN-m.

The reaction at the pin support A is equal to the moment of the force about the pin support A divided by the distance from the pin support A to the center of mass. The distance from the pin support A to the center of mass is 2.5 m, so the reaction at the pin support A is 11.77 kN-m / 2.5 m = 4.71 kN.

d The moment of the force about the roller support B is 11.77 kN * 1 m = 11.77 kN-m.

The reaction at the roller support B is equal to the moment of the force about the roller support B divided by the distance from the roller support B to the center of mass. The distance from the roller support B to the center of mass is 1.5 m, so the reaction at the roller support B is 11.77 kN-m / 1.5 m = 7.85 kN.

Learn more about mass on

https://brainly.com/question/86444

#SPJ1

When determining the place value of the digits in a decimal number, we can use a place value chart. Example: the number 4342.761's 3 and 6 in terms of their place values. A decimal place value chart should be used to first write the number.

This decimal chart aids in determining the place value of a decimal number's digits. A decimal point, often known as a dot or point, is used to demarcate the parts of a number that are whole and decimal.

Therefore, The place values of each digit, including those before and after the decimal point, are shown in a decimal number chart.

Learn more about decimal system here:

https://brainly.com/question/28222265

#SPJ1

A contractor has a job that should be completed in 100 days. At present, he has 80 men on the job and it is estimated that they will finish the work in 130 days. Of the 80 men, 50 are each paid ₱120.00 a day, 25 at ₱180.00 a day, and 5 at ₱250.00 a day. For each day beyond the original 100 days, a contractor has to pay ₱500.00.

liquidated damages.(a) How many more men should the contractor add so that he would complete the work on time?In the first case, we see that the contractor already has 80 men and they are working for 130 days to complete the job. So, we can use the following formula to determine the additional number of workers required to finish the work in 100 days.

b) If of the additional men, 2 are paid ₱180.00 a day, and the rest at ₱120.00 a day, would the contractor save money by employing more men and not paying the fine Let’s assume that the contractor adds 440 workers, of which 2 are paid ₱180.00 a day and the rest are paid ₱120.00 a day.

The total cost of the new workers is, therefore, ₱9600.00 + ₱4500.00 + ₱49800.00 = ₱63,900.00.The cost of liquidated damages would be calculated as follows:  $$LD = (130-100) \cdot 500 = ₱15,000.00$$.

Therefore, the contractor would save money if he employs more men and not pays the fine. The contractor’s savings would be:$$Savings = LD - Additional cost$$$$= 15000.00 - 63900.00 $$$$= -48900.00$$

Thus, we can see that the contractor would save ₱48,900.00 by employing more men and not paying the fine.

To know more about contractor visit:

https://brainly.com/question/31457618

#SPJ11

Answer:

A

Explanation:

Answer: True

Explanation:

The Statement: An Android theme can be specified on an activity-by-activity basis is False

It is false to claim that an Android theme can be specified individually for each activity. In Android, themes are typically applied at the application level or for specific components such as the entire application, a group of activities, or certain UI elements.

Once a theme is set for a particular scope, it remains consistent throughout that scope, and it cannot be customized on an activity-by-activity basis. However, it is possible to customize the appearance of individual activities by using styles or modifying specific attributes within the activity's layout file, which allows for visual variations within the constraints of the overall theme.

Learn more about Android theme

brainly.com/question/31391141

#SPJ11

Proeutectoid signifies is a phase that forms (on cooling) before the eutectoid austenite decomposes. It has a parallel with primary solids in that it is the first phase to solidify out of the austenite phase. Thus, hypoeutectoid is the correct answer.

Hypoeutectoid steels are those that contain less than 0.80 weight percent carbon (strictly 0.77 weight percent C, but a less stringent definition is used in commercial practice). Proeutectoid ferrite and austenite, each with a different carbon content, can coexist as two distinct phases in hypoeutectoid steels after initial cooling from the austenite single phase field. The remaining austenite undergoes the eutectoid reaction, converting to ferrite plus cementite (i.e., pearlite), and as a result, the microstructure of these steels typically contains proeutectoid ferrite grains and pearlite islands.

Eutectoid steels have a carbon content of 0.76 weight percent (in reality, steels with a carbon content of 0.75 to 0.85 weight percent are frequently categorized as eutectoid steels). All carbon is dissolved in the austenite, which forms as a solid solution in these steels at any temperature in the austenitic range.

Learn more about Hypoeutectoid steels

https://brainly.com/question/16447246

#SPJ4

The resulting postfix expression is option A, wx+y/z. The order of operations for this expression is to first perform the addition inside the parentheses, then perform the multiplication outside the parentheses, and finally perform the division.

Starting with the infix expression, we first see the multiplication operator, so we add it to the stack. The next symbol is an open parenthesis, so we add it to the stack as well. Moving on, we see the variable x, which we add to the output string. The next symbol is a plus sign, so we add it to the stack. After that, we see the variable y, which we add to the output string. At this point, we have reached the end of the parentheses, so we need to start popping operators off the stack until we reach the matching open parenthesis.

We pop the plus sign and add it to the output string, and then we pop the multiplication sign and add it to the output string. Next, we see the variable z, which we add to the output string, followed by the division operator, which we add to the stack. Finally, we see the variable w, which we add to the output string. At this point, we have reached the end of the expression, so we need to pop any remaining operators off the stack and add them to the output string. In this case, there is only one operator left, which is the division operator, so we pop it and add it to the output string.

To know more about parentheses visit:-

https://brainly.com/question/28146414

#SPJ11

The best practice that Raven should follow is to use DC2 or DC3 as the Domain Naming Master of the following is a best practice that Raven should follow. The correct option is A.

The management of the addition or deletion of domains from the forest is the responsibility of the Domain Naming Master. For redundancy and fault tolerance, it is advised to split the FSMO roles among several domain controllers.

Since DC1 already has a copy of the global catalog, it is advantageous to choose a different domain controller (DC2 or DC3) as the Domain Naming Master to disperse the workload and guarantee high availability. This ensures that the forest's operations may continue even if one domain controller goes offline and prevents the creation of a single point of failure.

Thus, the ideal selection is option A.

Learn more about Domain Naming Master here:

https://brainly.com/question/31558740

#SPJ4

When scuba diving, the computer acts as a real-time monitor of the diver's depth, time spent at the bottom, and decompression needs.

The computer is an electrical gadget that has integrated seamlessly into contemporary life. It is a machine that uses specialised software to analyse data, carry out calculations, store and retrieve information, and carry out a variety of functions. The computer has completely changed the way we work and live by allowing us to easily accomplish complicated tasks and communicate across great distances. Almost every sector of the economy uses computers, from business and banking to healthcare and education. These include desktops, laptops, tablets, and smartphones, and they are available in a range of sizes and configurations. In general, the computer has had a significant influence on society, changing how we work, live, and communicate with one another.

Learn more about the computer here:

https://brainly.com/question/20837448

#SPJ4

The OS Theory Concept Map visually organizes the fundamental concepts of operating systems. It covers topics such as OS features, structure, threads, synchronization, memory management, file systems, mass storage, I/O, security, and protection.

OS Theory Concept MapThe primary purpose of OS Theory Concept Map is to visually outline and make connections between the concepts of operating systems theory.

The central idea for the concept map is "fundamental concepts that underlie operating systems". You will more specifically address the following topics represented in the Course Learning Outcomes (CLO):

Features and structure of contemporary operating systems Threads and process synchronizationMemory managementFile systemsMass storageI/OSecurity and protection

In this section, you will begin your concept map by addressing each of the following topics concerning operating system features and structures

Categorize, describe, and give examples of the major functions of operating systemsIllustrate the hierarchy of subsystems, components, or subcomponents of operating systems and explain how they interact with one another.

Learn more about Theory Concept Map: brainly.com/question/29602052

#SPJ11

It is to be noted that all UHRS platforms are optimized for the popular kinds of internet browser applications.

The Universal Human Relevance System (UHRS) is a crowdsourcing platform that allows for data labeling for a variety of AI application situations.

Vendor partners link people referred to as "judges" to offer data labeling at scale for us. All UHRS judges are bound by an NDA, ensuring that data is kept protected.

A browser is a software tool that allows you to see and interact with all of the knowledgeon the World Wide Web. Web sites, movies, and photos are all examples of this.

Learn more about internet browser applications.:
https://brainly.com/question/16829947
#SPJ1

The complex power is 110∠-30° VA, apparent power is 110 VA, real power is 95.26 W, reactive power is -55 VAR, and the power factor is lagging.

Given the voltage and current phasors V=220∠30° V rms and I=0.5∠60° A rms, we can calculate the complex power (S) using the formula S=V*I_conjugate. The conjugate of I is I*=0.5∠-60° A rms.

Multiplying the phasors, we get S=110∠-30° VA.

The apparent power (|S|) is the magnitude of S, which is 110 VA.

The real power (P) is the horizontal component of S, calculated as P=|S|*cos(θ), resulting in P=110*cos(-30°) = 95.26 W.

The reactive power (Q) is the vertical component, calculated as Q=|S|*sin(θ), resulting in Q=110*sin(-30°) = -55 VAR.

Since Q is negative, the power factor is lagging.

Learn more about apparent power at https://brainly.com/question/29726817

#SPJ11

The three main principles in engineering design are: strategic balance, top management approach and team work.

The principles are fundamental concepts that engineers use to develop effective solutions to complex problems. These principles are based on scientific and mathematical principles as well as practical considerations related to the materials, technologies and resources available to the engineer.

The engineering design process involves several stages, including problem identification, research, concept development, prototyping and testing. Throughout each stage, engineers apply various principles to ensure that their designs meet the needs and requirements of the intended users.

Read more about engineering design

brainly.com/question/411733

#SPJ1

Solution :

As the plane is flying in the air, the force of weight is pulling the plane down. This force must be equal to the force of lift which is generated from the plane's translation true the air. Therefore, the next condition must be satisfied.

\($F_W= L $\)  ................. (i)

The lift force of the plane is given by :

\($L=C_V \frac{\rho}{2} V^2 A$\)

Since the weight force of the plane is given, from the condition (i), we also know the intensity of the lift force.

Therefore, we transform the lift force expression to derive the lift coefficient formula:

\($C_L=\frac{2L}{\rho V^2 A}$\)

\($C_L=\frac{2 \times 1700}{2.38 \times 10^{-3 }\times (167.2)^2 \times 178} $\)

\($C_L = 0.287$\)

The statement that is true of the data component of an information system is (C) Aggregated data enables decision makers to focus on specific factors.

Aggregated data refers to the process of combining individual data points into summary or higher-level data sets. By aggregating data, decision makers can analyze and identify patterns, trends, and relationships between different factors. Aggregated data provides a broader view of the information, allowing decision makers to focus on specific factors or key metrics that are relevant to their decision-making process. This helps in gaining insights and making informed decisions based on the overall performance and trends indicated by the aggregated data. Data plays a crucial role in information systems by providing the foundation for decision-making and analysis. In the context of performance reports, current data (option A) is indeed collected to provide up-to-date information about the system's performance. However, this statement focuses on the collection aspect and doesn't address the utilization or aggregation of the data. Disaggregated data (option B) refers to data that is broken down into its individual components, which is not suitable for reporting overall performance during a particular sales quarter. Future data (option D) cannot be predicted as it is inherently uncertain and speculative, and therefore cannot be relied upon for budgets or cash flow reports. Aggregated data, on the other hand, involves summarizing and combining individual data points to create higher-level representations. Aggregation can involve various techniques, such as summing, averaging, or grouping data based on specific attributes or time periods. By aggregating data, decision makers can gain a broader perspective on the information, allowing them to identify trends, patterns, and relationships that may not be apparent at the individual data point level. This aggregated data provides decision makers with a more focused view of specific factors or metrics that are relevant to their analysis or decision-making process. By focusing on these specific factors, decision makers can extract meaningful insights and make informed decisions based on the overall performance indicated by the aggregated data.

learn more about Aggregated data here: brainly.com/question/5126752

#SPJ11

C. Product detector is well suited for demodulating SSB (single sideband) signals. A product detector, also known as a synchronous detector, is a type of circuit used to demodulate amplitude modulated (AM) signals.

It is particularly well suited for demodulating single sideband (SSB) signals, which are a type of AM signal that has one of the sidebands and the carrier suppressed, leaving only the other sideband.

The product detector works by multiplying the incoming AM signal with a local oscillator signal that is synchronized with the carrier frequency of the incoming signal. This multiplication process produces a new signal that contains the original modulating signal, which can then be extracted using a low-pass filter.

Compared to other types of detectors, such as the discriminator, phase detector, or phase comparator, the product detector is generally considered to be the most effective for demodulating SSB signals because it can extract the sideband signal even when the carrier is suppressed.

learn more about Product detector     here:

https://brainly.com/question/31624157

#SPJ11