Describe the risks associated with their working environment (such as tools, materials, and equipment that they use, spillages of oil and chemicals, not reporting accidental breakages of tools and equipment and not following laid-down working practices and procedures).
Answers
Answer:
b
Explanation:
The risks associated with the working environment include hazards related to tools, materials, and equipment, spillages of oil and chemicals, failure to report accidental breakages, and non-compliance with established working practices and procedures.
Working environments can present various risks to individuals, and it is crucial to identify and address these hazards to ensure the safety and well-being of workers.
Several factors contribute to the risks associated with the working environment, including tools, materials, equipment, spillages of oil and chemicals, failure to report accidental breakages, and non-compliance with established working practices and procedures.
The use of tools, materials, and equipment without proper training or understanding can lead to accidents and injuries.
Improper handling or malfunctioning of machinery and tools can result in severe harm, such as lacerations, fractures, or even amputations. Inadequate safety precautions and insufficient maintenance of equipment can exacerbate these risks.
Spillages of oil and chemicals pose significant hazards. Slippery surfaces caused by oil spills can lead to falls and subsequent injuries.
Exposure to hazardous chemicals, if not properly managed or protected against, can result in poisoning, skin irritation, respiratory issues, or long-term health complications.
Failure to report accidental breakages of tools and equipment is problematic because damaged equipment may malfunction, leading to accidents or injuries.
Undetected faults can compromise the integrity and effectiveness of machinery, potentially endangering workers and damaging products or property.
Neglecting laid-down working practices and procedures can have serious consequences.
These guidelines are designed to mitigate risks and promote safe working conditions.
Ignoring safety protocols, such as wearing personal protective equipment (PPE) or following proper lifting techniques, increases the likelihood of accidents, injuries, and even fatalities.
It is essential for organizations to prioritize safety measures, provide adequate training, and enforce adherence to safety protocols to minimize these risks and create a secure working environment.
For similar questions on working environment
https://brainly.com/question/28194094
#SPJ8
Related Questions
Sometimes we need to create heat, such as in circuit breakers and rear window
defoggers.
Select one:
O True
O False
Answers
Answer: True
Explanation:
Circuit breakers are used to stop the current by using heat to detect if it has a critically large current. Defoggers use heat to stop condensation on the windows.
3. If there were more than one corn in a square, would this code work?
Answers
The answer to the question is No because the so if section is only evaluated once before you proceed.
Describe Square.com.A mobile payment company called Square provides a variety of small business services, point-of-sale (POS) systems, business software, and payment hardware items. Contrary to the majority of payment processors, Square provides the most complete free Pos software on the market and is accessible to companies of all sizes.
What percentage of each sale does Square keep?The cost is 2.9% + 30 cent for card purchases made via your Square Store Website, Square Online Check, eCommerce API, or when a customer pays a bill online, or 1% with a minimum of $1 per transactions for ACH money orders (via Invoices only).
To know more about square visit:
https://brainly.com/question/28776767
#SPJ1
What is capillary action?
Answers
Select the tasks performed by a space operations specialist.
a. operate satellite electronic systems
b. apply system operational procedures
c. analyze satellite operational status
d. analyze Internet chatter
e. track enemy targets
f. analyze maps of weapons development
Answers
Note that a space operations specialist will:
operate satellite electronic systems (Option A)apply system operational procedures (Option B)analyze satellite operational status (Option C).Who is a space operation specialist?Space operations specialists typically work in the field of aerospace or satellite engineering, and their primary responsibilities involve maintaining and operating satellite systems and other space-related equipment.
They may also be responsible for monitoring the status of satellite systems, analyzing data from satellite missions, and developing procedures for operating satellite systems.
Note that Space operations specialists operate in space operations centers.
Learn more about Space Operations Specialist:
https://brainly.com/question/18575907
#SPJ1
If y varies inversely as x, and y =14 when x=8 , find y when x=7
Answers
Answer:
16
Explanation:
50 Points
Please answer the following and include your work:
Suppose a Ford Taurus is passing under an overpass. The height of the overpass is 17 feet (5.2 meters) above the road. At what minimum distance would the driver of the Taurus be able to see a vehicle at the top of the overpass using their rearview mirror. Suppose that the mirror is at the maximum angle permitted to see out the back window.
Extra (if you aren't tired of answering the first): Also calculate the angle and distance of the vehicle for an overpass height of 15 feet. And further calculate the distance with a mirror that is at the normal angle at both overpass heights.
Answers
Answer:
the minimum distance would be x where x = distance
Explanation:
use trigonometry to find out distance by using sohcahtoa
There are two junco birds that each have different proteins in their cells for beak
pointiness. They have different parents. What can you say about the birds' beak
pointiness? *
They will have the same beak pointiness because even with different proteins for beak
pointiness, the proteins can connect in the same way.
They will have different beak pointiness since offspring from different parents will
have different beak pointiness
They will have different beak pointiness since their proteins for beak pointiness are
different so the proteins will connect in different ways.
They will have the same beak pointiness since all junco birds have the same beak
pointiness.
Answers
Answer: They will have different beak pointiness since their proteins for beak pointiness are different so the proteins will connect in different ways.
Explanation:
Based on the information provided in the question, it should be noted that the pointiness of the birds beak will be different as a result the difference of their proteins for beak pointiness so the proteins will connect in different ways.
Assuming the two junco birds have thesame proteins in their cells for beak
pointiness, they'll have thesame beak pointiness.
what is the research and development process in order?
Answers
It is a cross functional process that includes market research, technical research, design of a concept, prototype creation, final product creation and launch.
Technician A says that the Warranty Policy and Procedures Manual states any additional Repair
Order completed in conjunction with a normal PDS must have time punch/flags for service
Technician B says that if multiple additional repairs are made in conjunction with normal PDS, the
Warranty Policy and Procedures Manual indicates that separate time flags must be punched for
each repair.
Who is right?
Answers
Both Technician A and Technician B are correct in their statements.
Technician A is correct in stating that the Warranty Policy and Procedures Manual requires time punch/flags for any additional Repair Order completed in conjunction with a normal Pre-Delivery Service (PDS).
This means that if there are any extra repairs performed alongside the regular PDS, each repair must be recorded and flagged separately to track the time spent on them.
Technician B is also correct in mentioning that the Warranty Policy and Procedures Manual indicates the need for separate time flags for each repair when multiple additional repairs are made in conjunction with a normal PDS.
This reinforces the requirement for individual tracking of the time spent on each additional repair, ensuring accurate documentation and appropriate warranty coverage for each repair performed.
Therefore, both technicians are providing accurate information about the requirements outlined in the Warranty Policy and Procedures Manual regarding time punch/flags for additional repairs completed in conjunction with a normal PDS.
For more questions on Warranty, click on:
https://brainly.com/question/13648985
#SPJ8
Technician a says that when more air is entering a spray booth than is removed it is considered to have negative pressure technician b say the negative air pressure draws more overspray through spray booth filters than positive air pressure Who’s right
Answers
In a spray booth, when the amount of air entering the booth is greater than the amount of air being removed, it is considered to have positive pressure. Conversely, when the amount of air being removed is greater than the amount of air entering, it is considered to have negative pressure. Therefore, Technician A's statement is incorrect.
On the other hand, Technician B's statement is correct. Negative air pressure can draw more overspray through spray booth filters because it creates a vacuum effect that draws in the overspray and helps prevent it from escaping into the rest of the work area. This is why spray booths are designed to have a negative pressure differential to help control overspray and keep the work environment safe.
Technician A is correct in stating that when more air is entering the spray booth than is being removed, it is considered to have negative pressure. Negative pressure means that the pressure inside the spray booth is lower than the pressure outside. This setup helps to contain the overspray and fumes within the booth, minimizing the risk of spreading them to the surrounding areas.
Technician B is also correct in stating that negative air pressure draws more overspray through the spray booth filters than positive air pressure. When the spray booth has negative pressure, it creates a suction effect. This suction draws the overspray particles towards the filters, improving their efficiency in capturing and removing the overspray from the air.
In summary, both technicians are correct in their statements. The negative pressure in the spray booth helps contain the overspray, and it also enhances the effectiveness of the booth's filters in capturing the overspray particles.
EL130 Unit 4 Trade Terms For each description listed, identify the term that the text best describes. These are your terms, you can only use one for each question. Strands, Splice, Termination, Connectors, Shielding, Connection, Reducing Connectors, Grooming, Drain Wire, Amperage Capacity Here are the questions below. 1. Because of thermal expansion and cold flow of aluminum, standard copper____________ cannot be safely used on aluminum wire. 2. Crimp-type_are used to connect two different sized wires. 3. For fire alarm cable to be effective the_______wire must be grounded. 4. A properly made________should last as long as the insulation on the wire itself. 5. A good electrical________should be mechanically and electrically secure. 6. Typically in instrumentation and control cable only one end is grounded and the ________at the other end is isolated by folding it back and taping over it. 7. Insulation particles can get trapped in the crimp joint and form the basis of a defective______________ 8. Poor craftsmanship in stripping and terminations can cause exposed _________,which are a safety hazard. 9. ______________the conductor ensures a proper fit in the crimp barrel. 10. Select the proper size terminal for the wire being terminated, to ensure that the___________ of the lug equals that of the conductor.
Answers
Answer:
Answers to the EL130 Unit 4 Trade Terms questions, with the term that best describes each description:
1. Because of thermal expansion and cold flow of aluminum, standard copper connectors cannot be safely used on aluminum wire.
2. Crimp-type reducing connectors are used to connect two different sized wires.
3. For fire alarm cable to be effective the drain wire must be grounded.
4. A properly made termination should last as long as the insulation on the wire itself.
5. A good electrical connection should be mechanically and electrically secure.
6. Typically in instrumentation and control cable only one end is grounded and the shielding at the other end are isolated by folding them back and taping over them.
7. Insulation particles can get trapped in the crimp joint and form the basis of a defective splice.
8. Poor craftsmanship in stripping and terminations can cause exposed strands, which are a safety hazard.
9. Grooming the conductor ensures a proper fit in the crimp barrel.
10. Select the proper size terminal for the wire being terminated, to ensure that the ampere capacity of the lug equals that of the conductor.
1. Termination
2. Reducing Connectors
3. Drain Wire
4. Connection
5. Connection
6. Connection
7. Termination
8. Strands
9. Grooming
10. Amperage Capacity
\( \: \)
PLEASEE HELP.!! ILL GIVE BRAINLIEST.!! *EXTRA POINTS* DONT SKIP:((
Answers
Answer:
16
Explanation:
Have a good day my friend
Answer:
it is 16
Explanation:
i looked it up
1. If a Series circuit has two loads of 8 and 4, what do you know about their voltage drops?
Answers
Answer:
the voltage drops will have the ratio 2 : 1
Explanation:
Assuming the loads have the same power factor, the voltage drop will be proportional to the load impedance. The loads have a ratio of 8 : 4 = 2 : 1, so the voltage drops will have a ratio of 2 : 1.
__
We assume the number associated with the load is representative of its impedance (not admittance, or some other measure).
in the grid (us) the transmission lines: a. none of the choices are correct b. only connects the generator substations to load centers. c. connect the generator substations to distribution substations but are not connected to each other at any specific location. d. not only connect the generator substations to load centers but also are connected to each other at specific locations called interconnects. e. connect the generator substations to distribution substations but are not connected to each other at any specific location except if the run as parallel circuits.
Answers
A National Grid substation is a sizable facility where 275 kV and 400 kV subterranean cables and overhead power lines are switched, and where electricity is converted to 132 kV for distribution to nearby communities.
Although not all substations have all of the above capabilities, substations are made to do the following tasks: Increase or decrease the voltage. To account for variations in system voltage, regulate the voltage. Switch the grid system's transmission and distribution circuits in and out. Through transmission and distribution power lines, power plants produce electricity that is then distributed to clients. Electricity is transported over vast distances to satisfy consumer needs using high-voltage transmission lines, including those that dangle between tall metal towers.
Learn more about transmission here-
https://brainly.com/question/14725358
#SPJ4
which metal is used in planes.
Answers
Answer:
SteelExplanation:
Steel is the metal that using in planes.
Aluminum and titanium also used in this aircraft industry.
Aluminum is ideal for aircraft manufacture because it's lightweight and strong.
hope this helps!!
have a nice day!
follow me ==> Hi1315
Answer:
steel
Explanation:
The metals used in the aircraft manufacturing industry include steel, aluminium and titanium with each possessing certain qualities that make them ideal for this use.
A hydraulic press must be used to press-fit two components together in an assembly process. The system must generate at least 3453 lb. of force to perform the press fit. The piston at the input cylinder is pushed with a force of 723 lbs. and has an area of 33.7 in.2. The output can use up to 15 cylinders that are each 33.7 in.2.
How many output cylinders must be incorporated into the design?
Answers
Note that 5 output cylinders must be incorporated into the design.
Why is this so ?The mechanical advantage of the system is the ratio of the output force to the inputforce. The mechanical advantage of the system is given by
MA = Fout / Fin
where
MA = mechanical advantage
Fout = output force
Fin = input force
MA = 3453/ 723 = 4.77
The area of the output cylinders is 33.7 in.2. The number of output cylinders is given by
n = Aout / Apiston
where
n = number of output cylinders
Aout = area of the output cylinders
Apiston = area of the piston at the input cylinder
hence,
The number of output cylinders must be at least 4.77 / 1 = 4.77. Since the number of output cylinders must be an integer, the number of output cylinders must be 5.
Larn more about output cylinders;
https://brainly.com/question/14936605
#SPJ1
In this approach, you work your way layer by layer up toward the application layer and verify that relevant network elements are operating correctly
A. Bottom-Up
B. Top-down.
C. Spot-the-difference.
D. Divide-and-conquer
Answers
Top-down you work your way layer by layer up toward the application layer and verify that relevant network elements are operating correctly
What is the top down approachIn the top-down approach, you start from the highest level of abstraction, which is the application layer in this case, and work your way down to lower layers, verifying that the relevant network elements are operating correctly at each layer.
This approach follows the natural flow of data and control from the application layer through intermediate layers to the lower network layers.
Read more on top down approach here https://brainly.com/question/14810153
#SPJ1
Examples of modern manufacturing allowing for customization to make specific items to suit individual needs.
Answers
Modern manufacturing has significantly advanced to cater to customization and meet individual needs.
Few examples of how modern manufacturing allows for customization:
1)3D Printing/Additive Manufacturing: 3D printing enables the production of highly customized items by building layer upon layer of material.
This technology allows for the creation of unique shapes, sizes, and designs, enabling customization on a personal level.
From customized prosthetics to personalized jewelry, 3D printing revolutionizes manufacturing by tailoring products to individual requirements.
2)Mass Customization in Apparel: Traditional manufacturing processes often involved producing items in standard sizes, limiting options for consumers.
However, modern manufacturing techniques, such as computer-aided design (CAD) and computer-aided manufacturing (CAM), allow for mass customization in apparel.
By utilizing body scanning and virtual fitting technologies, companies can offer custom-made garments that fit an individual's unique measurements and style preferences.
3)Customized Electronics: With advancements in technology, manufacturers can now offer customization options for electronic devices.
Customers can personalize specifications such as memory capacity, display size, and processing power to suit their needs.
Some companies even allow customers to design the appearance and choose specific features of their gadgets, ensuring that the final product aligns with their preferences.
4)Personalized Food and Beverages: Manufacturing has extended to the food and beverage industry, enabling customization in culinary experiences.
Companies now offer personalized nutrition plans, customized meal kits, and even 3D-printed food tailored to individual dietary requirements and taste preferences.
5)Automotive Industry: The automotive industry has embraced customization, allowing customers to configure various aspects of their vehicles, including color, trim, interior options, and additional features.
Some manufacturers offer online platforms where customers can design and visualize their personalized cars before ordering.
For more questions on Modern manufacturing
https://brainly.com/question/8462042
#SPJ8
In her first job out of college, Riki sometimes felt embarrassed by her mistakes. As she gained experience in technological problem solving, she began to like her mistakes more. Why?
Answers
Answer:
Explanation:There are many definitions of problem-solving – but at a basic level, it focuses on the ability to accurately assess a situation and arrive at a positive solution.
Solving problems is an analytical skill that many employers look for when reviewing candidate application forms.
This particular skill isn’t restricted to a single sector, industry or role, though employers in the engineering and legal industries, in particular, tend to look for proficiency.
Consequently, questions about your problem-solving ability are commonplace in interviews.
Tensile strength is the amount of force necessary to:
A) to crack a steel part.
B) absorb collision energy.
tear a piece of steel apart.
C)
D)
work-harden a steel part.
Answers
Tensile strength is the amount of force necessary to absorb collision energy. Hence option B is correct.
What is tensile strength?Tensile strength is defined as the maximum load a material can bear without breaking when it is stretched, divided by the material's initial cross-sectional area. The attribute of materials known as ultimate tensile strength is crucial in determining how mechanically effective they are.
Collision energy is defined as an important factor that impacts the informational content of beam-type collision-induced dissociation tandem mass spectrometry spectra, and the effective identification of peptides and proteins in MS-based proteomics depends greatly on the parameter's optimal selection.
Thus, tensile strength is the amount of force necessary to absorb collision energy. Hence option B is correct.
To learn more about tensile strength, refer to the link below:
https://brainly.com/question/14293634
#SPJ1
Router bits with cutting lips on the ends are for
Answers
Answer: plunging
Explanation: from modern cabinet making fifth edition: with plunge bits, the end of the flute has cutting edges
2. This is the area at the rear of the front
section, right in front of the windshield.
a. Kick panel
b.crossmember
c. Side panel
d. Cowl
Answers
Answer:
Explanation:
The correct answer is d. Cowl.
The cowl is the area at the rear of the front section of a vehicle, right in front of the windshield. It typically includes the windshield wipers, their motor, and other components related to the vehicle's ventilation and climate control systems. The cowl is an important structural component of the vehicle, providing support for the windshield and helping to channel rain and other precipitation away from the windshield and into the vehicle's drainage system.
Kick panel, crossmember, and side panel are all different parts of a vehicle, but they are not located in the same area as the cowl. The kick panel is a trim panel located on the interior of the vehicle, at the bottom of the front door opening. The crossmember is a structural component of the vehicle's frame or chassis, typically located underneath the vehicle. The side panel is a body panel that makes up the side of the vehicle, typically located between the front and rear wheels.
What is the correct definition for the grace period?
The amount you pay for your card each year
The time between when you make a purchase using the credit card and the date
when the credit card company begins charging you interest.
The amount of time you have to make late payments
The amount of time you have to pay your secured deposit
Answers
Answer:
The time between when you make a purchase using the credit card and the date when the credit card company begins charging you interest
Explanation:
The correct definition for the grace period is:
The time between when you make a purchase using the credit card and the date when the credit card company begins charging you interest.
During the grace period, which is typically between 21 and 25 days, you can pay off your balance in full and avoid paying any interest charges on your purchases. This is because the credit card issuer doesn't charge interest during the grace period as long as you pay your balance in full by the due date.
It's important to note that not all credit card issuers offer a grace period, and some may have shorter or longer grace periods than others. It's also important to read your credit card agreement carefully to understand how the grace period works and when interest charges will begin to accrue on your purchases.
Someone asks you to clean the fish tank, even though you think it is disgusting work. In the spirit of cooperativeness,
you should
a. complain as loudly as possible
b. leave work immediately
c. complete the task as well as you can
d. order someone else to do it
Please select the best answer from the choices provided
А
B
D
Next
Mark this and retum
Save and Exit
Submit
Answers
Answer:
obviously the answer is C
Answer:
c. complete the task as well as you can
Explanation:
Why is transverse unequal length wishbone preferred to that of equal length?
Answers
Answer:
It allows the wheels to move of the neutral position without the tires scrubbing
Explanation:
The double wishbone suspension is independent and it can be used in both the front wheels and it affords very good control of the outward or inward tilting of the front wheel and it keeps the wheels perpendicular to the road surface
However, when equal length parallel wishbone are installed, it gives rise to scrubbing of the tires as the wheels turn in the tracks
The development of unequal length non-parallel transverse or converging wishbones with A-arms suspension resolved the tire scrubbing effect on the wheels when moving out of the neutral position.
Tech A states that friction brakes lose energy as heat. Tech B states that a brake-by-wire system converts this energy into useful work. Who is
correct?
Answers
Tech A and B are correct about friction and the brake system in the statement given above.
Does brake-by-wire system converts this energy into good work?Friction that exist between brake drums and linings brings a lot of heat, and as such, it also reduces the mechanical energy of the movement of the brake drums and wheels.
Conclusively The brake-by-wire system is known to often uses the electric motor as a form of generator, that helps to reduce the vehicle by changing the car's kinetic energy into electrical energy and as such, both technicians are correct.
Learn more about energy from
https://brainly.com/question/13881533
When using a frame-engaging lift, the vehicle's center of gravity is important for proper placement of the vehicle.
Answers
You should provide feedback to at least two other students’ posters and brochures. Comment on what they did well and what they could have done better. Review the feedback that your projects received. How could you improve each one?
Answers
Answer:
u need to comment on two of your classmates posters lol
Explanation:
u just need to comment and see what ppl said about yours, insta is papibrenna :p
Answer:
I'm guessing it's the same thing as the other answer. I'd say you need to just look for any flaws on other people's posters and brochures, then look for some good things, you like about them and leave your personal feedback on what you think.
Explanation:
what does secure mean iready
Answers
A student who received a score of 3.00 or higher met or exceeded the benchmark for a student who is on track to pass.This score is based on the anticipation at the moment the exam was administered rather than the anticipation for the end of the year.
what does secure mean iready ?If a student receives a red rushing flag, it means that his or her score is probably below what is actually possible.A student must have completed the reading assessment in less than 11 seconds on average for them to obtain a red rushing flag. The student should retake the diagnostic, per the i-Ready advice. The i-Ready system poses no threat.This assessment platform is used by more than 23,000 schools, serving more than 10 million students, to conduct secure and trustworthy learning assessments.According to studies, pupils in Grades K–8 who utilize i-Ready make more advancements in math and reading than those who do not. A mid-on-grade level scale score of 498 is considered proficient for the fifth grade.A vertical scale is used to report the results of the i-Ready Diagnostic, allowing comparisons of growth within and across years.Every time they take the Diagnostic test, students are given a scale score. A student who received a score of 3.00 or higher met or exceeded the benchmark for a student who is on track to pass.This score is based on the anticipation at the moment the exam was administered rather than the anticipation for the end of the year.To learn more about i-Ready system refer
https://brainly.com/question/23868760
#SPJ1
purpose of all components in a water level sensor
Answers
Answer:
A combination of high and low sensors are used to tell the control panel when water levels are too high or too low. The control panel will then automatically turn the pump on or off depending on the corrective action needed.
Explanation:
purpose of all components in a water level sensor