2. Given the last NINE digits. Write out minterms with these numbers as subscripts of mi. You may remove the duplicated terms.
Given the NINE numbers are 5, 1, 1, 4, 6, 0, 0, 4, and 2. By removing a duplicated number ‘1’, '4', '0', the minterms are m0 and m4.
Then, answer the following SIX questions.
(a) Suppose there are FOUR input variables a,b,c, and d, and one output F1. OR the above
minterms together to obtain a canonical SOP. Write down the canonical SOP of F1.
(b) ADD 4 to each subscript of the minterms in (a) to get a new canonical SOP F2. Write
down the canonical SOP of F2.
(c) Convert the canonical SOP of F2 obtained in (b) to its equivalent canonical POS.
(d) Construct the truth table of the Boolean function of F1 and F2 obtained in (a) and (b).
(e) Write out the corresponding K-maps of the Boolean function of F1 and F2.
(f) Try to simplify the Boolean function of F1 and F2 by K-map obtained in (e).
3. Considering the canonical SOP F1 obtained in Q2, answer the following FOUR questions.
(a) MINUS 2 to each subscript of the minterms of F1 to get a new canonical SOP F3 that has
only THREE input variables a,b, and c. If the corresponding result is less than 0, set it to 0.
Simplify F3 by K-map.
(b) Draw out the logic diagram of F3 by three basic logic gates.
(c) Draw out the logic diagram of F3 by a 3-8 decoder.
(d) Draw out the logic diagram of F3 by a 8-to-1 multiplexer.
Answers
Answer:
(a) The minterms are m0 = b'c'd' + a'c'd' + a'b'd' + a'b'c' and m4 = b'c'd + a'b'd + a'bc'd + a'bc' + abcd. ORing these together gives the canonical SOP of F1: F1 = m0 + m4 = b'c'd' + a'c'd' + a'b'd' + a'b'c' + b'c'd + a'b'd + a'bc'd + a'bc' + abcd
(b) Adding 4 to each subscript gives: F2 = m4,4 + m8,8 = b'c'd' + a'b'c'd + a'bc'd + abcd + b'c'd + a'b'c'd + a'bc' + abcd = b'c'd' + a'b'c'd + a'bc'd + 2abcd + a'bc'
(c) To obtain the POS of F2, apply DeMorgan's law to each term: F2 = (b+c+d)(a+c+d)(a'+b'+d')(a'+b'+c')' + (b+c+d)(a'+b+c+d')(a+b'+c+d')(a+b+c'+d')'(a'+b+c') + (b'+c+d')(a+b'+c+d')(a'+b+c+d')(a+b+c+d) = Π(0,2,5,6,9,11,14)'
(d) The truth table for F1 is:
a | b | c | d | F1 --+---+---+---+--- 0 | 0 | 0 | 0 | 1 0 | 0 | 0 | 1 | 1 0 | 0 | 1 | 0 | 1 0 | 0 | 1 | 1 | 1 0 | 1 | 0 | 0 | 1 0 | 1 | 0 | 1 | 1 0 | 1 | 1 | 0 | 1 0 | 1 | 1 | 1 | 1 1 | 0 | 0 | 0 | 1 1 | 0 | 0 | 1 | 0 1 | 0 | 1 | 0 |
Explanation:
Related Questions
Which of the following is an implication of low
variety?
A. low unit cost
B. flexibility needed
C. high complexity
D. matching customers specific needs
PLEASE EXPLAIN WHICH IS CORRECT WITH EXPLANATION
Answers
The correct option for the implication of low variety is B) Flexibility needed. Variety refers to the number of different products, services, or activities that an organization offers. High variety means that a company offers a wide variety of products or services, while low variety means that a company provides a limited range of products or services.
One of the implications of low variety is that customers have limited options. They are restricted to purchasing only those goods and services that the company offers, which may not match their requirements or preferences. This may lead to losing customers to rivals who offer a greater variety of goods and services.
In the case of low variety, it is critical to have the required flexibility. Customers may ask for certain specific goods or services that are not provided by the company. To meet customer requirements, the company should be adaptable and able to rapidly respond to customer requests by expanding its product line. As a result, low variety necessitates the need for flexibility.
The other given options are not valid. Low unit cost is not related to low variety. Unit cost may be affected by economies of scale and other factors, but it is not directly related to variety. High complexity is not related to low variety as well. As the range of goods and services offered by the company increases, the complexity of the company's operations and management also increases. Matching customers' specific needs is partially correct because the company cannot match customer specific needs in low variety. In low variety, the company has a limited range of goods and services, so it is not possible to fulfill all the customers’ specific needs.
Know more about implication of low variety here:
https://brainly.com/question/32400070
#SPJ11
Can someone help me plz!!! It’s 23 points
Answers
Answer:
0.00695 A
Explanation:
µ represents \(10^{-6}\). Multiply this by 6,950.
Which of the following most accurately describes an institutional conflict of interest?
Answers
Answer:
Defined as a situation in which the financial investments or holdings of Stanford University or the personal financial interests or holdings of institutional leaders might affect or reasonably appear to affect institutional processes for the design, conduct, reporting, review, or oversight of human subjects research.
Which of the following is iterative? *
Science
Engineering
Criteria
Infrastructure
Answers
Dilute countercurrent immiscible extraction
A feed of 100.0 kg/min of a 1.2 wt % mixture of acetic acid in water is to be extracted with 1-butanol at 1 atm pressure and 26.7°C, we desire an outlet concentration of 0.1 wt % acetic acid in the exiting water. We have available solvent stream 1 that is 44.0 kg/min of pure 1-butanol and solvent stream 2 that is 30.0 kg/min of 1-butanol that contains 0.4 wt % acetic acid. Devise a scheme to do this separation, find the outlet flow rate and concentration of the exiting 1-butanol phase, and find the number of equilibrium contacts needed.
In Example we assumed that we were going to use all of the solvent available. There are other alternatives. Determine if the following alternatives are capable of producing outlet water of the desired acetic acid concentration.
a. Use only the pure solvent at the bottom of the extractor.
b. Mix all of the pure and all of the impure solvent together and use them at the bottom of the column.
c. Mix all of the pure and part of the impure solvent together and use them at the bottom of the column.
Answers
When installing a new CPU, you have to make sure the crystal and clock chip send out the correct clock pulse for that particular CPU.
Answers
When installing a new CPU, it is important to ensure that the crystal and clock chip are set up properly to send out the correct clock pulse for that particular CPU.
The clock pulse is the signal that synchronizes the computer's processing activities, and if it is not properly set up, it can result in system instability or even damage to the CPU. Therefore, it is essential to consult the manufacturer's instructions and specifications for the CPU and the motherboard to ensure that the clock pulse is set up correctly during installation. This can involve adjusting the crystal frequency or selecting the correct clock source, among other steps, and may require some technical expertise or assistance. Ultimately, taking the time to properly set up the clock pulse can help ensure optimal performance and reliability for the new CPU.
Learn more about CPU here:-
https://brainly.com/question/16254036
#SPJ11
how do you fix this code? python
from random import randint
class Character:
def __init__(self):
self.name = ""
self.health = 1
self.health_max = 1
def do_damage(self, enemy):
damage = min(
max(randint(0, self.health) - randint(0, enemy.health), 0),
enemy.health)
enemy.health = enemy.health - damage
if damage == 0: print "%s evades %s's attack." % (enemy.name, self.name)
else: print "%s hurts %s!" % (self.name, enemy.name)
return enemy.health <= 0
Answers
The correct code that fixes this bug-filled python code is:
from random import randint
class Character:
def __init__(self):
self.name = ""
self.health = 1
self.health_max = 1
def do_damage(self, enemy):
damage = min(
max(randint(0, self.health) - randint(0, enemy.health), 0),
enemy.health)
enemy.health = enemy.health - damage
if damage == 0:
print("%s evades %s's attack." % (enemy.name, self.name))
else:
print("%s hurts %s!" % (self.name, enemy.name))
return enemy.health <= 0
class Enemy(Character):
def __init__(self, player):
Character.__init__(self)
self.name = 'a goblin'
self.health = randint(1, player.health)
class Player(Character):
def __init__(self):
Character.__init__(self)
self.state = 'normal'
self.health = 10
self.health_max = 10
def quit(self):
print(
"%s can't find the way back home, and dies of starvation.\nR.I.P." % self.name)
self.health = 0
def help(self): print(Commands.keys())
def status(self): print("%s's health: %d/%d" %
(self.name, self.health, self.health_max))
def tired(self):
print("%s feels tired." % self.name)
self.health = max(1, self.health - 1)
def rest(self):
if self.state != 'normal':
print("%s can't rest now!" % self.name)
self.enemy_attacks()
else:
print("%s rests." % self.name)
if randint(0, 1):
self.enemy = Enemy(self)
print("%s is rudely awakened by %s!" %
(self.name, self.enemy.name))
self.state = 'fight'
self.enemy_attacks()
else:
if self.health < self.health_max:
self.health = self.health + 1
else:
print("%s slept too much." % self.name)
self.health = self.health - 1
def explore(self):
if self.state != 'normal':
print("%s is too busy right now!" % self.name)
self.enemy_attacks()
else:
print("%s explores a twisty passage." % self.name)
if randint(0, 1):
self.enemy = Enemy(self)
print("%s encounters %s!" % (self.name, self.enemy.name))
self.state = 'fight'
else:
if randint(0, 1):
self.tired()
def flee(self):
if self.state != 'fight':
print("%s runs in circles for a while." % self.name)
self.tired()
else:
if randint(1, self.health + 5) > randint(1, self.enemy.health):
print("%s flees from %s." % (self.name, self.enemy.name))
self.enemy = None
self.state = 'normal'
else:
print("%s couldn't escape from %s!" %
(self.name, self.enemy.name))
self.enemy_attacks()
def attack(self):
if self.state != 'fight':
print("%s swats the air, without notable results." % self.name)
self.tired()
else:
if self.do_damage(self.enemy):
print("%s executes %s!" % (self.name, self.enemy.name))
self.enemy = None
self.state = 'normal'
if randint(0, self.health) < 10:
self.health = self.health + 1
self.health_max = self.health_max + 1
print("%s feels stronger!" % self.name)
else:
self.enemy_attacks()
def enemy_attacks(self):
if self.enemy.do_damage(self):
print("%s was slaughtered by %s!!!\nR.I.P." %
(self.name, self.enemy.name))
Commands = {
'quit': Player.quit,
'help': Player.help,
'status': Player.status,
'rest': Player.rest,
'explore': Player.explore,
'flee': Player.flee,
'attack': Player.attack,
}
p = Player()
p.name = input("What is your character's name? ")
print("(type help to get a list of actions)\n")
print("%s enters a dark cave, searching for adventure." % p.name)
while(p.health > 0):
line = input("> ")
args = line.split()
if len(args) > 0:
commandFound = False
for c in Commands.keys():
if args[0] == c[:len(args[0])]:
Commands[c](p)
commandFound = True
break
if not commandFound:
print("%s doesn't understand the suggestion." % p.name)
Read more about python programming here:
https://brainly.com/question/27666303
#SPJ1
scrapers are used to haul dirt from a borrow pit to the cap of a landfill. the estimated cycle time for the scrapers is 9.5 minutes. The scrapers carry 10 cubic yards of soil per trip . using a system efficiency of 45 minutes per hour and producitivity factor of determine the number of labor hours to haul 1 cubic yard of dirt. each scraper require one operator
Answers
If you are exposed to potentially infectious material via a sharps injury, what should you do immediately?
select the best option.
get the blood tested before washing it away.
report the injury.
wash the area with soap and water.
blot the area with a dry tissue.
Answers
Answer:
Soap and water
Explanation:
then report the injury....
reduce the levels and apply a Galate the reduce appropriate A mechanical excavator bring use to work on the sewer requirs a minimum werking height of 4. Som What Clearance lit below the bridge?
Answers
Excavators are versatile heavy equipment machines used in construction, demolition, and mining projects.
What sizes do they come in?They come in various sizes and shapes and can be equipped with different attachments such as buckets, hammers, and grapples.
Excavators are used for digging, loading, lifting, and moving materials, including soil, rocks, and debris. They are commonly used in road and building construction projects to excavate foundations, dig trenches for pipes, and remove unwanted materials from sites.
Excavators are an essential tool in the construction industry due to their efficiency, power, and flexibility in performing different tasks.
P.S Your question is mumbled and incomplete, so I gave you a general overview about the use of excavators in construction for a better understanding.
Read more about excavation in construction here:
https://brainly.com/question/28781304
#SPJ1
calculate force and moment reactions at bolted base O of overhead traffic signal assembly. each traffic signal has a mass 36kg, while the masses of member OC and AC are 50Kg and 55kg, respectively. The mass center of mmber AC at G.
Answers
Answer:
The free body diagram of the system is, 558 368 368 508 O ?? O, Consider the equilibrium of horizontal forces. F
Explanation:
I hope this helps you but I think and hope this is the right answer sorry if it’s wrong.
Elevator Pitch Presentation for Electrical and Computer Engineering Student:-
Write a short concise persuasive and impactful elevator pitch presentation description of the organization, business plan, and business idea or yourself as a potential suitor for any organization. For Example for the business plan and idea you follow two-step:-
Identify the need/Problem
Identify your unique selling Proposition
Elevator Pitch (For yourself as a potential candidate) your elevator pitch includes
Describe yourself (skills, experience,…)
Describe what you bring to the table (demonstration statement "I have this (strength/skill) that I demonstrated when I (did this/proposed this")
Describe why you are unique (referring to the demonstration statement)
Describe your goal (in alignment with the company goals and current projects
Answers
Elevator Pitch Presentation for Electrical and Computer Engineering Student:
Hi, my name is [Your Name], and I am an Electrical and Computer Engineering student. I am excited to be here today to share with you my skills and experience.
My skills include proficiency in programming languages such as Python, C++, and Java. I also have experience in designing and implementing digital circuits, and developing software applications for various projects.
What I bring to the table is a unique combination of technical expertise and creativity. For instance, I designed and implemented a device that used machine learning algorithms to detect and classify objects with high accuracy. The project required me to apply my knowledge of circuit design, programming, and data analysis, and I am proud of the results we achieved.
I believe my unique approach to problem-solving makes me stand out from other candidates. I enjoy thinking outside the box and coming up with innovative solutions to complex problems.
My goal is to use my skills and experience to contribute to projects that align with the company's mission and goals. I am passionate about using technology to create products that can make a positive impact on people's lives.
Thank you for considering me as a potential candidate. I am confident that I can bring value to your organization and look forward to discussing this opportunity further.
Learn more about Engineering from
https://brainly.com/question/28321052
#SPJ11
QUESTION 1
1.1. Explain why it is expected that two soil samples separated by 50 kilometers will
have different mineral compositions and particle size distributions.
(4)
1.2. Your geotechnical laboratory team has been tasked with identifying two different
types of rocks for a project in Free State. Discuss briefly the three physical
properties you will utilize to visually identify the rock type.
[13 marks]
(9)
Answers
Due to variation in environmental and geological factors, two soil samples from 50 kilometers are expected to have different mineral composition.
Why will two soil samples separated by a distance expected to have different mineral composition1. Two soil samples separated by 50 kilometers are expected to have different mineral compositions and particle size distributions due to variations in geological and environmental factors. Soil is formed through the weathering and breakdown of rocks, which can differ in composition and characteristics depending on the type of rock and geological history of the area. Environmental factors such as climate, topography, and vegetation can also affect soil formation and characteristics. Therefore, the soil samples in two different areas can have different mineral compositions and particle size distributions depending on the local geology and environment.
2. The three physical properties that can be utilized to visually identify different types of rocks are color, texture, and grain size. Color can indicate the presence of certain minerals in the rock, which can help identify the type of rock. Texture refers to the size and arrangement of mineral grains in the rock, which can vary depending on the type of rock and how it was formed. Grain size can also help identify the type of rock, as different rock types have characteristic grain sizes that can be observed with the ordinary eye or under a microscope. Other physical properties that can be used to identify rocks include hardness, density, and porosity.
Learn more on soil sample here;
https://brainly.com/question/23744269
#SPJ1
In a circuit board assembly process with four serial operations, the process capacity is 275 boards per hour, based on step 3 of the process. Step 1 can process 325 boards per hour. Step 2 can process 400 boards per hour. Step 3 can process 275 boards per hour. Step 4 can process 375 boards per hour. What is the implied utilization of step 1?
Answers
The implied utilization of step 1 is 118.18%.
Process capacity refers to the number of units that can be produced in a given time period. It is important for managers to understand process capacity in order to identify potential bottlenecks and improve efficiency. In this case, the circuit board assembly process has four serial operations. The process capacity is 275 boards per hour based on step 3 of the process. Step 1 can process 325 boards per hour. Step 2 can process 400 boards per hour. Step 3 can process 275 boards per hour. Step 4 can process 375 boards per hour.To determine the implied utilization of step 1, we need to calculate its capacity and compare it to the process capacity. The formula for utilization is:Utilization = Capacity / Process capacityStep 1 can process 325 boards per hour, which means its capacity is 325 boards per hour.Utilization of step 1 = (325 / 275) x 100% = 118.18%.
Learn more about implied utilization here :-
https://brainly.com/question/30932007
#SPJ11
Draw the ipo chart for a program that reads a number from the user and display the square of that number ???Anyone please
Answers
Answer:
See attachment for chart
Explanation:
The IPO chart implements he following algorithm
The expressions in bracket are typical examples
Input
Input Number (5, 4.2 or -1.2) --- This will be passed to the Processing module
Processing
Assign variable to the input number (x)
Calculate the square (x = 5 * 5)
Display the result (25) ----> This will be passed to the output module
Output
Display 25
Seth wants to build a wall of bricks. Which equipment will help him in the process?
OA masonry pump
OB. hacksaw
OC. mortar mixer
OD. pressurized cleaning equipment
Answers
i took masonry for 2 years. hope this helps!
A 4-pole, 3-phase induction motor operates from a supply whose frequency is 60 Hz. calculate: 1- the speed at which the magnetic field of the stator is rotating. 2- the speed of the rotor when the slip is 0.05. 3- the frequency of the rotor currents when the slip is 0.04. 4- the frequency of the rotor currents at standstill.
Answers
Answer:
The answer is below
Explanation:
1) The synchronous speed of an induction motor is the speed of the magnetic field of the stator. It is given by:
\(n_s=\frac{120f_s}{p}\\ Where\ p\ is \ the \ number\ of\ machine\ pole, f_s\ is\ the\ supply \ frequency\\and\ n_s\ is \ the \ synchronous\ speed(speed \ of\ stator\ magnetic \ field)\\Given: f_s=60\ Hz, p=4. Therefore\\\\n_s=\frac{120*60}{4}=1800\ rpm\)
2) The speed of the rotor is the motor speed. The slip is given by:
\(Slip=\frac{n_s-n_m}{n_s}. \\ n_m\ is\ the \ motor\ speed(rotor\ speed)\\Slip = 0.05, n_s= 1800\ rpm\\ \\0.05=\frac{1800-n_m}{1800}\\\\ 1800-n_m=90\\\\n_m=1800-90=1710\ rpm\)
3) The frequency of the rotor is given as:
\(f_r=slip*f_s\\f_r=0.04*60=2.4\ Hz\)
4) At standstill, the speed of the motor is 0, therefore the slip is 1.
The frequency of the rotor is given as:
\(f_r=slip*f_s\\f_r=1*60=60\ Hz\)
How do you calculate resistors in parallel?
Answers
After adding the two values together, take the reciprocal once more. For instance, if one resistor is 2 ohms and the other is 4 ohms, the equivalent resistance is calculated as 1 / (1/2 + 1/4) = 1 / (3/4) = 4/3 = 1.33.
What are resistors?The resistor is a passive two-terminal electrical component used in circuits to implement electrical resistance. Resistors have a variety of purposes in electronic circuits, including lowering flow of current, adjusting signal levels, dividing voltages, biasing active components, and terminating powerlines. High-power resistors that can generate many watts of heat instead of electrical energy can be utilized as test loads for generators, power distribution systems, and motor controls. With temperature, time, or operating voltage changes, fixed resistors' resistances only slightly fluctuate. Variable resistors can be utilized as force sensors, heat sensors, light sensors, volume controls, lamp dimmers, humidity sensors, and chemical activity sensors.
To know more about resistors, visit:
https://brainly.com/question/30401917
#SPJ4
The following are the impulse responses of continuous-time LTI systems. Determine whether each system is causal and/or stable. Prove your answers. The proof for stability needs to in terms of the integration condition. (a) h(t) = e^-4t u㈠-2) (b) h(t) = e^-1/2t u(t - 2) (c) h(t) = e^-0.1t u(t + 100)(d) h(t) = e^4t u(t - 2) (e) h(t) = e^ltl (f) h(t) = t^2 e^-t/2 u(t) (g) h(t) (2e^-1/2 + e^(10-t)/10) u(t + 2)
Answers
This system is causal and stable in integratiοn cοnditiοn. The impulse respοnse h(t) is zerο fοr t < -2, and fοr t ≥ -2, it is given by h(t) = e⁻⁴t.
What is integratiοn cοnditiοn?Integratiοn cοnditiοns are sets οf cοnditiοns that must be met fοr integratiοn tο take place. Integratiοn is a prοcess in which twο οr mοre entities are cοmbined tο fοrm a single entity. Integratiοn cοnditiοns help ensure that the desired οutcοme is achieved and that the entities being integrated are cοmpatible with each οther.
(b) This system is causal and stable. The impulse respοnse h(t) is zerο fοr t < 2, and fοr t ≥ 2, it is given by h(t) = e⁻¹/²t.
(c) This system is nοt causal, but it is stable. The impulse respοnse h(t) is zerο fοr t ≤ -100, and fοr t > -100, it is given by h(t) = e⁻⁰.¹t.
(d) This system is nοt causal and nοt stable. The impulse respοnse h(t) is zerο fοr t < 2, and fοr t ≥ 2, it is given by h(t) = e⁴t.
(e) This system is not causal and not stable. The impulse response h(t) is given by h(t) = \(e^{It}\).
(f) This system is causal and stable. The impulse response h(t) is zero for t < 0, and for t ≥ 0, it is given by h(t) = t² \(e^{-t/2}\).
(g) This system is causal and stable. The impulse response h(t) is zero for t < -2, and for t ≥ -2, it is given by h(t) = (2e⁻¹/² + e\(e^{10 - t} / 10\) u(t + 2).
Learn more about Integration condition :
brainly.com/question/16710668
#SPJ1
3. describe the basic procedures (or steps) of nonlinear finite element analysis. [10 points]
Answers
Nonlinear finite element analysis is a technique used to simulate complex engineering problems where the behavior of the structure or material cannot be described by linear relationships.
The basic procedures involved in nonlinear finite element analysis can be summarized as follows:
Problem definition: This involves defining the geometry, material properties, loading, and boundary conditions of the problem to be solved. It also includes defining the type of analysis to be performed (static, dynamic, transient, etc.) and selecting an appropriate numerical method for the analysis.
Mesh generation: In this step, the geometry is discretized into small finite elements, and nodes are placed at the vertices of the elements. The mesh must be refined enough to capture the features of the geometry and loading, but not too fine that it causes excessive computational time.
Material modeling: This step involves selecting a material model that accurately describes the behavior of the material being analyzed.
Solution procedure: Once the problem is defined, and the mesh and material model are created, the analysis can be performed. The solution procedure involves solving a set of nonlinear algebraic equations that describe the equilibrium of the structure or material being analyzed. \
Post-processing: Finally, the results of the analysis are interpreted and displayed in a meaningful way. This includes generating contour plots, graphs, and animations that show the behavior of the structure or material being analyzed.
To know more about Nonlinear finite element analysis, visit:
brainly.com/question/28445081
#SPJ11
what is the function of a fuse and its effect when not present?
Answers
Answer:
A fuse prevents an electrical object from receiving too much current. In the event too much electricity is received by an electrical component, the fuse is designed to melt and separate. There are several different types of fuses. The most common in the automotive industry is called a cartridge fuse. Cartridge fuses are held in place by spring clips and are easy to replace when necessary.
Explanation:
me that both a triaxial shear test and a direct shear test were performed on a sample of dry sand. When the triaxial test is performed, the specimen was observed to fail when the major and minor principal stresses were 100 lb/in2 and 20 lb/in2, respectively. When the direct shear test is performed, what shear strength can be expected if the normal stress is 3000 lb/ft2
Answers
Answer:
shear strength = 2682.31 Ib/ft^2
Explanation:
major principal stress = 100 Ib / in2
minor principal stress = 20 Ib/in2
Normal stress = 3000 Ib/ft2
Determine the shear strength when direct shear test is performed
To resolve this we will apply the coulomb failure criteria relationship between major and minor principal stress a
for direct shear test
use Mohr Coulomb criteria relation between normal stress and shear stress
Shear strength when normal strength is 3000 Ib/ft = 2682.31 Ib/ft^2
attached below is the detailed solution
An o ring intended for use in a hydraulic system using MIL-H-5606 (mineral base) fluid will be marked with
Answers
An o ring intended for use in a hydraulic system using MIL-H-5606 (mineral base) fluid will be marked with a blue stripe or dot.
construction expertise (e.g., by the construction firm) is typically included latest in the planning process in which arrangement?
Answers
The most common applications for micro piles are structural foundation support, underpinning, wall support, and slope stabilization.
The master format is a common outline for organizing information about building materials and components. Its primary divisions include topics such as sitework, concrete, masonry, metals, wood, and plastics, among others.) Seismic retrofitting or strengthening is done to improve the structural capacities (strength, stiffness, ductility, stability, and integrity) of the structure so that the building's performance level can be raised to withstand the design earthquake consideration.
The mass concrete underpinning method is the traditional underpinning method that has been used for centuries. The method entails extending the old foundation to a stable stratum. The soil beneath the existing foundation is excavated in stages orpins in a controlled manner.
Learn more about foundation here-
https://brainly.com/question/28900452
#SPJ4
In order to enhance net radiation exchange between a high temperature surface and a low temperature surface in an enclosure, one should:________.
(A) polish both surfaces so that they are highly reflective
(B) paint both surfaces so that they are close to a blackbody surface
Answers
Answer: Option B
Explanation:
In order to enhance net radiation exchange between a high temperature surface and a low temperature surface in an enclosure, one should: paint both surfaces so that they are close to a blackbody surface but don't polish both surfaces so that they are highly reflective
I need to solve for d
Answers
Answer:
it's not included
Explanation:
plz exact ur explain
Answer:
si amor
Explanation:
Hoiykñjdnlklbutrk
2. Data Compression (50 points): Write a MIPS assembly program in the MARS simulator that accepts an input string of size less than 50 characters, and applies the following compression algorithm to the string, and then prints the resulting compressed string. The input string will only consist of alphabets, i.e., a-z and A-Z. First check the string to make sure it's a valid input (if not, print an error message and quit). Then walk through the string looking for consecutive occurrences of the same character and replace them with the character and a count (called a "run length encoding"). For example, if you see AAAAA, you would replace them with A5. If you see BBBBBBBBBBBB, you would replace them with B12. Single character occurrences do not need a count. At the end, print the compression ratio, which is a floating point number = (size of input string) / (size of output string). For reference, here is an Here is an example run of the program: Provide an input string with less than 50 characters and only containing a-z or A-Z: AACCCCCGTTTTTTTTTTTTTTAAAbbcd The compressed string is: A2C5GT14A3ab2cd The compression ratio is
Answers
The compression ratio is 8.0 #message for printing compression ratio
.text #text segment ;main:#print prompt,li $v0, 4,la $a0, prompt,syscall
What is ratio?Ratio is a comparison between two or more quantities expressed in terms of their relative sizes. Ratios are typically written using the following format: a:b, where a and b are two numbers or quantities. Ratios can be used to compare measurements of different units, such as time, distance, weight, speed, or money. Ratios can also be used to compare more abstract quantities, such as levels of satisfaction, happiness, or importance. Ratios can be used to create fractions, which can then be used to solve many math problems.
To learn more about ratio
https://brainly.com/question/30683918
#SPJ4
A cylinder of 100 mm diameter and 300 mm
length rotates about a vertical axis inside a
fixed cylindrical tube of 105 mm diameter and
300 mm length. If the space between the tube
and the cylinder is filled with liquid of dynamic
viscosity of 0.125 N.s/mº, determine the speed
of rotation of the cylinder which will be obtained
if an external torque of 1 Nm is applied to it
[Ans. 81.03 r.p.m.)
Answers
Answer:
Actualmente estoy trabajando en una pregunta diferente en este momento.
Actualmente estoy trabajando en una pregunta diferente en este momento.
Explanation:
5.5 A scraper with a 275 hp diesel engine will be used to excavate and haul earth for a highway project. An evaluation of the job-site conditions indicates the scraper will operate 40 min./hr. For this project it is anticipated that the total cycle time will be 20 min. for a round trip. Previous job records show the scraper operated at full power for the 1.5 min. required to fill the bowl of the scraper and at 80% of the rated hp for the balance of the cycle time. Calculate the gallons per hour for fuel consumption of the scraper.
Answers
Answer: Fuel consumption per hour of the scrapper is 6 gal/hr
Explanation:
Given that;
Rated power = 275 hP
The scraper will work = 40min per hr
anticipated total cycle time = 20min
Previous Scrapper operated full power for 1.5min at 80% hP
First we find the Engine factor;
filling the bucket = 1.5/20 * 100% = 0.075
rest of cycle = (20-1.5)/20 * 80% = 0.74
so total engine factor = 0.075 + 0.74 = 0.815
now Time factor will be 40/60 = 0.6666 =
therefore operating factor = 0.6666 * 0.815 = 0.543
Now we know that for a diesel engine, a range fuel consumption = 0.04 gal/hP
so
Fuel consumption per hour of the scrapper is;
= 0.543 * 275 * 0.04
= 5.97 = 6 gal/hr
Some analysts believe that the exclusion of some traditional partners from the "democratic camp" by the United States will deepen the gap between the two sides; the invitation of some countries or regions suspected of "democratic retrogression" will affect the "credibility" of the summit.
Answers
The exclusion of some traditional partners from the "democratic camp" by the United States will undoubtedly deepen the gap between the two sides.
About summit :
This move by the US is seen as a sign of its dissatisfaction with the policies and behavior of these countries. In addition, the invitation of some countries or regions suspected of "democratic retrogression" may lead to further erosion of the credibility of the summit in the eyes of the invited countries, as well as the international community. At the same time, it is worth noting that the United States must consider the consequences of such actions and the possible damage to its international image. If the US is seen as selectively choosing partners, it may undermine its overall influence in the world.
To know more about summit
https://brainly.com/question/16033767
#SPJ1