Write a recursive method that takes two integer number start and end. The method int evensquare2 (int start, int end) should return the square of even number from the start number to the end number. Then, write the main method to test the recursive method. For example:
If start = 2 and end = 4, the method calculates and returns the value of: 22 42=64
If start = 1 and end = 2, the method calculates and returns the value of: 22=4
Sample I/O:
Enter Number start: 2
Enter Number end: 4
Result = 64
Enter Number start: 1
Enter Number end: 2
Result = 4

Answer:

  (a)  -55.6%, -31.25 V

  (b) -11.1%, -6.25 V

  (c) -0.93%, -0.52 V

Explanation:

The open-circuit voltage is (75V)(750/(250+750)) = 56.25 V.

The circuit to which the meter is connected has a Thevenin equivalent impedance of 1/(1/250 +1/750) = 187.5 kΩ. So, the relative error for a given meter impedance of R (in kΩ) is ...

  (R/(R +187.5) -1) × 100% = -187.5/(R +187.5) × 100%

(a) For a meter impedance of (1 kΩ/V)×150V = 150 kΩ, the error is ...

  -187.5/(150 +187.5) × 100% ≈ -55.6%

The voltage error is (56.25 V)(-55.6%) = -31.25 V.

__

(b) For a meter impedance of (20 kΩ/V)×75V = 1500 kΩ, the error is ...

  -187.5/(1500+187.5) × 100% ≈ -11.1%

The voltage error is (56.25 V)(-5.88%) = -6.25 V.

__

(c) For a meter impedance of 20,000 kΩ, the error is ...

  -187.5/(20000+187.5) × 100% ≈ -0.93%

The voltage error is (56.25 V)(-0.93%) = -0.52 V.

We require as many variables as there are columns of data in the CSV, and we must first build a reader class instance. These two claims on the unpacking of values into variables are accurate.

To read a CSV file line by line, we can use the readlines() method rather than the readline() method. When used on a file object, the readlines() method produces a list of every line in the file.

The csv. writer() function returns a writer object that creates a delimited string from the user's data.

To know more about data visit:-

https://brainly.com/question/11941925

#SPJ1

The cable that is attached exactly above the centre of gravity of the beam and has the length L = sqrt(x2 + h2) = sqrt((W/F)2) = sqrt(0.5) sqrt(W) = sqrt(700) sqrt(0.5) 18.7 ft. is the shortest cable that may be used to raise the beam.

The standard weight is determined as follows: G is equal to L * mweight, where L is the length of the beam determined as the separation between the extreme points of the beam body measured along the direction of the beam axis, with all features except holes taken into consideration.

We may express L2 in terms of x and F using the equations above as follows:

L² = x² + h²

= x² + (T/F)²

Substituting T = W + F, we get:

L² = x² + ((W+F)/F)²

Expanding and simplifying, we get:

L² = x² + (W/F)² + 2W/F + 1

d(L²)/dx = 2x

Setting this equal to zero, we get:

x = 0

This tells us that the minimum value of L² is obtained when x = 0, which means that A and B are vertically aligned. In other words, the cable should be attached directly above the center of gravity of the beam.

When we apply the derivative to F, we obtain:

d(L²)/dF = 2(W/F)² - 2W/F²

Setting this equal to zero, we get:

F = sqrt(2W)

Substituting W = 700 lb, we get:

F = sqrt(1400) lb

To know more about force visit:-

https://brainly.com/question/13191643

#SPJ4

Answer:

Reciprocating engines operate on the basis principle of converting fuel/chemical energy into mechanical energy.

Explanation:

These are piston engines that uses up and down motions of pistons to convert pressure into rotational motion. The common types of a reciprocating engines are :

The engine utilizes 4 processes to complete a cycle, which are;

These processes indicate that chemical energy in the fuel mixture is converted to mechanical energy causing motion.

Answer: observational error

Explanation:

An Error occurs when the measurement is actually done by the Observational approach. Thus, the correct option is D.

The ideal methods of measurement are subdivided into two methods: They are as follows:

The Direct measurement method involves the utilization of instruments such as micrometers, vernier calipers, coordinate measuring machines, etc. In this method, the unknown quantity is directly compared with the standard quantity.

In the Indirect measurement method, the physical parameter of the quantity is measured with the help of the direct method.

Positioning of the required quantity, operator-biased measurement, and the utilization of instruments for estimating the measurement of any unknown value are generally favored in order to eliminate the chances of errors.

Therefore, an Error occurs when the measurement is actually done by the Observational approach. Thus, the correct option is D.

To learn more about Errors in Measurement, refer to the link:

https://brainly.com/question/475573

#SPJ2

The maximum profit of $180 is obtained by producing 20 units of product A and 0 units of product B.

a. Linear Programming Model:

Let us assume that x and y be the units of A and B, respectively, that are produced. Then, the linear programming model can be formulated as:

Maximize Z = 9x + 7y,

Subject to:2x + 4y ≤ 40(Assembly Line 1)4x + 8y ≤ 60(Assembly Line 2)x ≥ 0, y ≥ 0b.

Graphical Analysis:

Given below is the graph of the constraints for the given problem, To find out the solution graphically, we need to look at the vertices of the feasible region, and then choose the one that will maximize our objective function.

The coordinates of the vertices of the feasible region are,(0, 10), (6, 7.5), (15, 5), and (20, 0).

By substituting these values in the objective function, we get the following results:

(0, 10): Z = 7 × 10 = 70(6, 7.5): Z = 9 × 6 + 7 × 7.5 = 94.5(15, 5): Z = 9 × 15 + 7 × 5 = 150(20, 0): Z = 9 × 20 = 180

Hence, the maximum profit of $180 is obtained by producing 20 units of product A and 0 units of product B.

For more such questions on profit, click on:

https://brainly.com/question/1078746

#SPJ8

A car manufacturing company decides to open a bid for a new part they need to install in order to improve the efficiency of the brakes. We can conclude that this is a PMD/PED non-paradigmatic case. The correct option is b.

A choice that should be made by engineers, or at the very least in accordance with professional engineering standards, is known as "proper engineering design" (PED). A choice that should be made by managers, or at the very least be controlled by management, is known as proper management design (PMD).

PED, or proper engineering decision. A decision should be made by engineers or at the very least follow professional engineering standards for a number of reasons, including:  Involving complex technological issues that call for engineering knowledge and Adheres to the moral principles reflected in engineering codes, particularly those that demand engineers to safeguard the public's health and safety.

Learn more about car, here:

https://brainly.com/question/29068011

#SPJ4

Answer:

attached below

Explanation:

Given data:

Gaged flow = 52 m^3 / sec

Depth covering drainage area = 1450 km^2

Develop a 24-hour rainfall duration unit hydrograph for the watershed using observed hydorgraph

Runoff flow = gaged flow - base flows

                   = 52 - 52 = 0 m^3/sec

For 18 hours time duration

Direct runoff volume ( Vr ) = ∑ ( QΔt1 )

where Δt = 6

           ∑Q = 3666 m^3/sec

hence Vr = Δt * ∑Q  = 79185600 m^3

Next we will convert the Direct runoff volume to its equivalent depth covering the drainage area

= Vr / drainage area depth

= 79185600 / 1450000000 = 5.46 cm

Next we will find the unit hydrograph flows by applying the relation below

\(Q_{1.0cm} = Q_{5.46cm} (\frac{1.0cm}{5.46cm} )\)

where 14m^3/sec = \(Q_{5.6cm}\)

input value back to the above relation

\(Q_{1.0cm} = 2.57 m^3/sec\)

Attached below is The remaining part of the solution  tabulated below

and A graph of the unit hydorgraph for the given watershed

Note :

Base  flow total = 1560

UH total = 671.30

Answer:

metals, composite, ceramics and polymers.

Explanation:

The four categories of engineering materials used in manufacturing are metals, composite, ceramics and polymers.

i) Metals: Metals are solids made up of atoms held by matrix of electrons. They are good conductors of heat and electricity, ductile and strong.

ii) Composite: This is a combination of two or more materials. They have high strength to weight ratio, stiff, low conductivity. E.g are wood, concrete.

iii) Ceramics: They are inorganic, non-metallic crystalline compounds with high hardness and strength as well as poor conductors of electricity and heat.

iv) Polymers: They  have low weight and are poor conductors of electricity and heat

Answer:

here you go.

screenshot 2 should give you some basic idea

Utilizing a transfer test examines this performance trait connected to the acquisition of motor skills, adaptability.

The process of motor learning is acquiring a skill, then performing it repeatedly while keeping an end in mind (Schmidt & Wrisberg 2007). For instance, it takes a lot of practice and effort to learn to play a song on the piano until the action becomes instinctive and skillfully performed.

As a result, the development of motor abilities may trigger a chain reaction that affects areas unrelated to motor behavior, such as perception and cognition, language and communication, emotional expression and control, physical development and health, etc. Finally, the development of motor skills makes conduct more adaptable and useful.

Therefore, the correct answer is option A. Adaptability.

To learn more about motor skill learning refer to:

https://brainly.com/question/18825144

#SPJ4

Tech B is correct because his statement accurately reflects the diverse nature of atoms regarding their electron transfer capabilities.

Tech B is correct in stating that not all atoms can easily give up or accept electrons. The ability of an atom to gain or lose electrons depends on its atomic structure and the distribution of its electrons in the outermost energy level, known as the valence shell.

Atoms strive to achieve a stable electron configuration typically by obtaining a full valence shell with eight electrons (the octet rule), which is more stable. The elements with fewer than four or more than four valence electrons are typically more reactive as they either tend to gain or lose electrons to achieve a stable configuration.

Read more about atoms

brainly.com/question/6258301

#SPJ4

Answer:

SECTION LEARNING OBJECTIVES

By the end of this section, you will be able to do the following:

Distinguish between static friction and kinetic friction

Solve problems involving inclined planes

Section Key Terms

kinetic friction static friction

Static Friction and Kinetic Friction

Recall from the previous chapter that friction is a force that opposes motion, and is around us all the time. Friction allows us to move, which you have discovered if you have ever tried to walk on ice.

There are different types of friction—kinetic and static. Kinetic friction acts on an object in motion, while static friction acts on an object or system at rest. The maximum static friction is usually greater than the kinetic friction between the objects.

Imagine, for example, trying to slide a heavy crate across a concrete floor. You may push harder and harder on the crate and not move it at all. This means that the static friction responds to what you do—it increases to be equal to and in the opposite direction of your push. But if you finally push hard enough, the crate seems to slip suddenly and starts to move. Once in motion, it is easier to keep it in motion than it was to get it started because the kinetic friction force is less than the static friction force. If you were to add mass to the crate, (for example, by placing a box on top of it) you would need to push even harder to get it started and also to keep it moving. If, on the other hand, you oiled the concrete you would find it easier to get the crate started and keep it going.

Figure 5.33 shows how friction occurs at the interface between two objects. Magnifying these surfaces shows that they are rough on the microscopic level. So when you push to get an object moving (in this case, a crate), you must raise the object until it can skip along with just the tips of the surface hitting, break off the points, or do both. The harder the surfaces are pushed together (such as if another box is placed on the crate), the more force is needed to move them.

Civil penalties, additional fines, and criminal penalties

Civil penalties

A civil penalty is a monetary fine imposed to make amends for wrongdoing. It differs from a criminal penalty in that it is not meant to punish the person it is imposed on. Instead, it seeks to restore and complete the other person who has been harmed or injured. Civil penalties, also referred to as civil fines, are only financial in nature. A judge or jury decides whether to impose them and also determines the appropriate amount of the fine to be imposed.

Criminal penalties

Criminal penalties include any punishment for a crime, fine, penalty, or other similar obligation imposed on a person as a result of their deeds, omissions, or violations.

To know more about Penalty, check out:

https://brainly.com/question/1178265

#SPJ4

Answer:

Overall project duration

Explanation:

Scheduling can best be defined as the process used to determine a overall project duration.

It means that the gas with the lowest molecular weight will have the highest effusion rate.

The given gases' effusion rates are listed in order from highest to lowest. The effusion rate of a hydrogen molecule is the highest, whereas that of a hydrocarbon is the lowest.

A gas will effuse faster when it is lighter and more slowly when it is heavier. Helium (He) will have the highest rate of effusion since it has the lowest molecular weight (atomic weight, in this example).

The following equation can be used to compare the rate of effusion for two gases: The effusion rates in this case are inversely related to the square root of the gas molecules' masses. A container contains an amalgam of neon and argon gas.

To learn more about rate of effusion is refer to:

https://brainly.com/question/28747259

#SPJ4

Answer:

Except what? I'm confused

All of these are true about using adhesive except Bilateral. A bilateral contract is defined as an agreements between two parties in which each side agrees to fulfill his or her side of the bargain.

A bilateral contract is defined as an agreements between two parties in which each side agrees to fulfill his or her side of the bargain. According to my research on the different terms used when referencing an insurance contract, I can say that all of the answers provided except for Bilateral are considered typical characteristics describing the nature of an insurance contract.

Since an insurance contract is a fund that the insurance company pays in the case of an accident in which the person is injured, there is only one party that agrees to fulfill their side of the bargain and that is the insurance company.

Therefore, All of these are true about using adhesive except Bilateral. A bilateral contract is defined as an agreements between two parties in which each side agrees to fulfill his or her side of the bargain.

Learn more about adhesive on:

https://brainly.com/question/29061431

#SPJ2

With a rated 240 V, a 10 kW heating element would unsurprisingly yield approximately 34,121.42 BTU/h.

To determine the power of a 10 kW heating element functioning at a constant 240 V in BTU/h (British Thermal Units per hour), we must initially convert from kilowatts to watts and then use an appropriate conversion factor.

1 kW = 1,000 W

So, 10 kW equates to 10,000 W

To arrive at BTU/h, we can apply the following conversion factor:

1 W = 3.412142 BTU/h

Thus, by multiplying the wattage amount with the conversion rate, we come up with the total BTU/h output:

BTU/h = 10,000 W * 3.412142 BTU/h/W = 34,121.42 BTU/h

To conclude, with a rated 240 V, a 10 kW heating element would unsurprisingly yield approximately 34,121.42 BTU/h.

Read more about voltage here:

https://brainly.com/question/1176850

#SPJ1

Answer:

1) This is because too much fuel is needed to get a payload from the surface to orbital altitude an accelerated to orbital speed.

2) This is because space travel present extreme environment that affect machines operations and survival.

Explanation:

Hope it helps

sen yapsana mk halla halla yaw

The light source should be placed at a specific distance from the antique headlight reflector to achieve the desired effect. To determine this distance, we can use the properties of the reflector and the principles of optics.

The reflector is 10 inches wide and 3 inches deep. The width corresponds to the horizontal dimension, while the depth corresponds to the vertical dimension. Since the reflector is opening upward and vertex at the origin, we can imagine a coordinate system where the x-axis represents the width and the y-axis represents the depth. The origin (0,0) corresponds to the vertex of the reflector. To find the appropriate placement of the light source, we need to consider the focal point of the reflector. The focal point is the point where parallel light rays, after being reflected, converge or appear to converge. In the case of a parabolic reflector like the antique headlight reflector, the focal point is located at a distance equal to one-fourth of the width of the reflector from the vertex.

So, in this case, the focal point would be located at a distance of 2.5 inches (10 inches divided by 4) from the vertex of the reflector. Therefore, to achieve the best lighting effect, the light source should be placed at the focal point of the reflector, which is 2.5 inches away from the vertex. By placing the light source at the focal point, the light rays emitted from the source will be reflected by the parabolic shape of the reflector and converge at a single point, creating a focused and concentrated beam of light. It's important to note that this explanation assumes ideal conditions and neglects factors like the size and shape of the light source, as well as any obstructions or imperfections in the reflector. These factors can affect the precise placement of the light source and the resulting beam of light. In conclusion, to achieve optimal lighting, the light source should be placed at the focal point of the antique headlight reflector, which is 2.5 inches away from the vertex of the reflector.

To know more about headlight reflector visit:

https://brainly.com/question/30261887

#SPJ11

Answer:

a) \(\mathbf{Q_c = -3730.8684 \ Btu/hr}\)

b) \(\mathbf{\sigma _c = 4.3067 \ Btu/hr ^0R}\)

Explanation:

From the properties of Super-heated Refrigerant 134a Vapor at \(T_1 = 40^0 F\), \(P_1 = 30 \ lbf/in^2\) ; we obtain the following properties for specific enthalpy and specific entropy.

So; specific enthalpy \(h_1 = 109.12 \ Btu/lb\)

specific entropy \(s_1 = 0.2315 \ Btu/lb.^0R\)

Also; from the properties of saturated Refrigerant 134 a vapor (liquid - vapor). pressure table at \(P_2 = 160 \ lbf/in^2\) ; we obtain the following properties:

\(h_2 = 115.91 \ Btu/lb\\\\ s_2 = 0.2157 \ Btu/lb.^0R\)

Given that the power input to the compressor is 2 hp;

Then converting to  Btu/hr ;we known that since 1 hp = 2544.4342 Btu/hr

2 hp = 2 × 2544.4342 Btu/hr

2 hp = 5088.8684 Btu/hr

The steady state energy for a compressor can be expressed by the formula:

\(0 = Q_c -W_c+m((h_1-h_e) + \dfrac{v_i^2-v_e^2}{2}+g(\bar \omega_i - \bar \omega_e)\)

By neglecting kinetic and potential energy effects; we have:

\(0 = Q_c -W_c+m(h_1-h_2) \\ \\ Q_c = -W_c+m(h_2-h_1)\)

\(Q_c = -5088.8684 \ Btu/hr +200 \ lb/hr( 115.91 -109.12) Btu/lb \\ \\\)

\(\mathbf{Q_c = -3730.8684 \ Btu/hr}\)

b)  To determine the entropy generation; we employ the formula:

\(\dfrac{dS}{dt} =\dfrac{Qc}{T}+ m( s_1 -s_2) + \sigma _c\)

In a steady state condition \(\dfrac{dS}{dt} =0\)

Hence;

\(0=\dfrac{Qc}{T}+ m( s_1 -s_2) + \sigma _c\)

\(\sigma _c = m( s_1 -s_2) - \dfrac{Qc}{T}\)

\(\sigma _c = [200 \ lb/hr (0.2157 -0.2315) \ Btu/lb .^0R - \dfrac{(-3730.8684 \ Btu/hr)}{(40^0 + 459.67^0)^0R}]\)

\(\sigma _c = [(-3.16 ) \ Btu/hr .^0R + (7.4667 ) Btu/hr ^0R}]\)

\(\mathbf{\sigma _c = 4.3067 \ Btu/hr ^0R}\)

Answer: Technical sales engineer

Explanation:

An analysis engineer makes use of data and other technical information in order for him or her to be able to analyze a project plan, and provide necessary solutions.

Technical sales engineers gives their clients the needed support and sales advice for their business to thrive. Technical sales engineers helps their clients in giving technical advices, answering queries, as well as introducing new products.

Design engineers are the engineers that study, and develop ideas that will be used for new products. Sometimes, they also modify systems used in production so that organizational performance can be improved.

Inspection engineers are the engineers that looks at infrastructures and identify the problems affecting them e.g oil pipelines, roads, bridges, etc so that accidents will be prevented.

Consulting engineer is an engineer that deals with the planning, and infrastructures. Their work benefits the society as a whole.

Based on the above explanation, the answer is technical sales engineer.

Answer:

technical sales egineer

Explanation:PLATO

Answer:

 So its area A = 4 * 4sqrt(2) = 16sqrt(2) inches^2

Explanation:

In order to find the area of the section, we need to find the length of one of the diagonals.

Using the Pythagorean Theorem, a^2 + b^2 = c^2, we pick any side of the cube which in

itself is a square with sides 4 inches each.  The length of the diagonal of the square is

2(4^2) = c^2  or c = 4sqrt(2).

To calculate the area of the section, we must first determine the length of one of the diagonals. Using the Pythagorean Theorem, \(\bold{a^2 + b^2 = c^2}\), one selects any side of the cube which in its a square with four-inch sides.

           \(\to 2(4^2) = c^2 \\\\ \to c = 4\sqrt{(2)}\)

      \(\to A = 4 \times 4\sqrt{(2)} = 16\sqrt{(2)}\ inches^2\)

Therefore, the answer is "\(\bold{ 16\sqrt{(2)}\ inches^2}\)".

Learn more:

brainly.com/question/44587

Answer:

transmission bandwidth required is very large.

Explanation:

When the process is in control but does not meet specification, it is referred to as a special cause error.

In statistical process control, a process is considered to be in control when it operates within the defined limits and shows only random variations. However, when a process is in control but does not meet the desired specifications, it indicates the presence of a special cause error.

Special cause errors are attributed to specific factors or events that cause the process to deviate from the expected outcome. These errors are typically unpredictable and require investigation and corrective action to bring the process back within the desired specifications.

Read more about control error

brainly.com/question/16230467

#SPJ1

The quartiles divide a set of observations into four portions, each representing 25% of the observations, together with the minimum and maximum values of the data set. The interquartile range, a measurement of variation around the median, is calculated using quartiles.

Statistical file: {2, -6, 5}

Quartile Q1: -6

Quartile Q2: 2

Quartile Q3: 5.

To Learn more about quartiles refer to:

https://brainly.com/question/28168026

#SPJ1

The answer is C) rating locally sourced foods. While consuming locally sourced foods can have environmental benefits, it is not a direct action to mitigate against climate change. The other options listed - using energy efficient light bulbs, planting trees to remove CO2, driving a vehicle with high fuel economy, and improving regional land use practices - are all examples of actions individuals can take to help reduce their carbon footprint and mitigate against climate change.

Answer: Central Processing Unit