Which step is this ?prophase I, Anaphase I, prophase II, Anaphase II

Answer:

nope nope nope nope nope nope nope nope

Answer:

Al= (27/78)x100

Al= 34.6%

O= (48/78)x100

O= 61.5%

H= (3/78)x100

H= 3.85%

Answer:

The key difference between atomic mass and average atomic mass is that the atomic mass is the mass of an atom, whereas the average atomic mass is the mass of an atom of a particular chemical element calculated by considering isotopes of that element.

Explanation:

Hi there!

\(\large\boxed{4.04g}\)

To solve, we can use dimensional analysis to convert from molecules to grams.

We must use Avogadro's number (6.02 × 10²³) in converting from molecules to moles.

After converting, multiply by the atomic mass, or grams per mole.

\(1.204 * 10^{24} moles *\frac{1 mol}{6.02*10^{23}moles}* \frac{2.02g}{1mol }= 4.04g\)

The best way to measure the pH of a natural solution while out in a forest is to use a portable pH meter or pH test strips specifically designed for field use. These instruments provide accurate and reliable pH measurements and are convenient for outdoor applications.

1. Prepare the necessary equipment: Before heading out to the forest, gather the required tools. You will need a portable pH meter or pH test strips, as well as the necessary reagents or calibration solutions if using a pH meter.

2. Collect the sample: Locate the natural solution you want to measure the pH of, such as a stream, pond, or soil. Use a clean container to collect a representative sample of the solution.

3. Calibrate the pH meter (if applicable): If you are using a portable pH meter, it is essential to calibrate it before taking measurements. Follow the manufacturer's instructions to calibrate the meter using the provided calibration solutions.

4. Conduct the measurement: For pH meters, immerse the electrode into the collected sample. Allow some time for the reading to stabilize, and then record the pH value indicated on the meter's display.

5. Using pH test strips: If you are using pH test strips, dip the strip into the collected sample for the recommended amount of time. Remove the strip and compare the color change with the provided color chart. Determine the corresponding pH value from the chart.

6. Repeat for accuracy: To ensure reliability, repeat the measurement process at least once and compare the results. This step helps confirm the accuracy of your measurements.

7. Record and analyze the data: Note down the pH values obtained and any relevant observations. Analyze the data as needed for your research or monitoring purposes.

By following these steps and using the appropriate equipment, you can effectively measure the pH of a natural solution while in a forest setting.

For more such questions on measurements, click on:

https://brainly.com/question/28391278

#SPJ8

Explanation:

To convert moles to particles or grams to particles, let us have a firm understanding of what a mole is.

A mole is the unit of measuring quantity of particles.

It is the amount of substance that contains the Avogadro's number of particles.

The particle can be atoms, molecules, formula units, electrons, protons, neutrons, etc.

 So, to convert from moles to particles;

    1 mole of a substance  contains 6.02 x 10²³ particles

To convert from grams to particles;

  First convert to moles;

        number of moles  = \(\frac{mass}{molar mass}\)  

  So,    1 mole of a substance  contains 6.02 x 10²³ particles

Answer:

Any Group 2A element (Be, Mg, Ca, Sr, Ba, Ra)

Explanation:

According to the Octet Rule, Sulfur would want to gain two electrons in its outermost shell to achieve an octet (8 total electrons).  The elements that could accomplish this in a one-to-one ratio would be Group 2A on the periodic table (alkaline earth metals).

There are two types of chemical compound one is covalent compound and other is ionic compound, covalent compound formed by sharing of electron and ionic compound formed by complete transfer of electron. Therefore, alkaline earth metals are the suitable elements.

Chemical Compound is a combination of molecule, Molecule forms by combination of element and element forms by combination of atoms in fixed proportion.

An ionic compound is a metal and nonmetal combined compound. Ionic compound are very hard. They have high melting and boiling point because of strong ion bond.

The compound that is ionic in nature can be dissociated very easily in water. Since ionic compounds are polar in nature, they readily dissolve in water.  The elements that could accomplish this in a one-to-one ratio would be  alkaline earth metals

Therefore, alkaline earth metals are the suitable elements.

To learn more about chemical compound, here:

brainly.com/question/26487468

#SPJ2

Answer:

photosynthesis uses light as energy source,and cell respiration uses chemical energy

According to reaction

Mols of H_2O

\(\\ \tt\rightarrowtail 4.35(0.6)\)

\(\\ \tt\rightarrowtail 2.61mol\)

According to law of conservation of mass, 4.35 moles of water are produced when 2.80 moles of hydrogen  and 1.55 moles of oxygen react.

According to law of conservation of mass, it is evident that mass is neither created nor destroyed rather it is restored at the end of a chemical reaction .

Law of conservation of mass and energy are related as mass and energy are directly proportional which is indicated by the equation E=mc².Concept of conservation of mass is widely used in field of chemistry, fluid dynamics.

Law needs to be modified in accordance with laws of quantum mechanics under the principle of mass and energy equivalence.This law was proposed by Antoine Lavoisier in the year 1789.As 2.80 moles of hydrogen react with 1.55 moles of oxygen 2.80+1.55=4.35 moles of water are produced.

Learn more about law of conservation of mass,here:

https://brainly.com/question/28711001

#SPJ2

Answer:

1. A scientist conducts and gathers research to gain knowledge in a particular area.

2. Many of the worlds problems include resources, energy, health, environment, climate, transportation, communication, etc. and will require solutions from science and engineering.

\(K_{sp}\) of the compound is found to be  5.04 ×\(10^{-10}\).

Solubility :Solubility can be define as the amount of a substance that dissolves or mixes in a given amount of solvent at specific conditions.

Solubility equilibrium

Ksp = \([A^{+} ]^{a}\) \([B^{-} ]^{b}\)

Ksp = solubility product constant

A+ = cation in an aquious solution

B- = anion in an aqueous solution

a, b = relative concentrations of a and b

Given,

Solubility = s = 3.60 × \(10^{-2}\) g/L

molar mass = 288 g/ mol

∴ s= 3.60 × \(10^{-2}\) g/L ÷ 288 g/ mol = 1.25 ×\(10^{-4}\) mol/ L

Reaction:

MX3 ⇄ M + 3X

           s       3s

\(K_{sp}\) =[ \(M^{+3}\)] [ \(X^{-1}\)\(]^{3}\) = solubility product

∴ \(K_{sp}\) =\([s]^{} [3s]^{3}\)

∴ \(K_{sp}\) = 3 \(s^{4}\)

∴ \(K_{sp}\) = 3 × (3.60 × \(10^{-2}\) \()^{4}\)

∴ \(K_{sp}\) = 503.8848 ×\(10^{-8}\)  = 5.04 ×\(10^{-10}\)

Learn more about solubility here .....

https://brainly.com/question/23946616

#SPJ1

Answer:

............................................................................................................................

Explanation:

because ........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................

This representation suggests that the element is phosphorus (P) with a mass number of 30, which is incorrect. The correct mass number for phosphorus is approximately 30.97. The incorrect representation for a neutral atom is 36Li

To determine the correct representation for a neutral atom, we need to consider the atomic number (Z) and mass number (A) of the element. The atomic number represents the number of protons in the nucleus, while the mass number represents the sum of protons and neutrons.

Let's analyze the given representations:

36Li:

This representation suggests that the element is lithium (Li) with a mass number of 36, which is incorrect. The correct mass number for lithium is approximately 6.94.

613C:

This representation suggests that the element is carbon (C) with a mass number of 13, which is correct. Carbon has different isotopes, and 13C represents one of its stable isotopes.

3063Cu:

This representation suggests that the element is copper (Cu) with a mass number of 63, which is correct. Copper has different isotopes, and 63Cu represents one of its stable isotopes.

1530P:

This representation suggests that the element is phosphorus (P) with a mass number of 30, which is incorrect. The correct mass number for phosphorus is approximately 30.97.

Therefore, the incorrect representation for a neutral atom is 36Li, as it does not match the known properties of lithium.

For more question on atom

https://brainly.com/question/26952570

#SPJ8

Answer:A

Explanation:

Answer:

It would would be oxidized.

Explanation:

Sorry I can't explain it.

Chlorine gains an electron in a redox reaction, it would be reduced.

Chemical reactions can be described as the transfer of electrons from one chemical substance. The electron-transfer reactions are named oxidation-reduction reactions or redox reactions.

The reactions can be accompanied by energy changes in the form of heat, light, electricity, etc. The oxidation and reduction reaction involves the addition of oxygen or hydrogen respectively to different substances.

The reduction can be described as a process that involves the addition of hydrogen. It can also be defined as the process in which an atom or ion accepts one or more electrons.

Oxidation can be described as a process that involves the addition of oxygen. Oxidation can be defined as the process in which an atom or ion donates or loses one or more electrons.

As the chlorine accepts electrons so it gets reduced.

Learn more about reduction, here:

https://brainly.com/question/

#SPJ2

CH3CH2OH - Hydrogen bonds

CH3CH2CH3 - Dispersion forces

CH3CH2Cl - Dipole - Dipole interaction

Intermolecular forces are the attractive or repulsive forces that exist between molecules. These forces are responsible for determining many of the physical properties of materials, including their melting and boiling points, viscosity, and solubility.

The strength of intermolecular forces varies depending on the type of force and the molecules involved. In general, intermolecular forces increase with increasing polarity and molecular size.

Learn more about intermolecular forces:https://brainly.com/question/9007693

#SPJ1

Answer:  **

H-N-H

   |

  H

Explanation:

Look at a periodic table to determine how many electrons you need to account for. Hydrogen (H) only has 1 electron, while Nitrogen (N) has 5. We have three Hydrogen atoms and one Nitrogen atom, so the total number of electrons will be 3 * 1 + 5 = 8 e-.

Now, place the center atom, which will be Nitrogen and place the three Hydrogens on three sides of it as above in the answer. You should use single bonds for this. Each single bond is a pair of electrons, so since we have three single bonds so far, we have accounted for 2 * 3 = 6 electrons. However, we need 2 more electrons for the total of 8. We put these electrons in as a lone pair above Nitrogen.

We check to see if everything follows the octet rule: Nitrogen has three single bonds, so that's 6 e-, as well as one lone pair, so that's another 2 e- for a total of 8 e-. Check. Now look at Hydrogen: H is the only element whose full orbital is 2 e-. Each H has a single bond with Nitrogen, so each does have 2 e-.

Thus, we know this is the correct diagram, and we are done.

Explanation:

A bond line structure of a compound has H N H in linear plane and a hydrogen is branching upward, and the compound is H N (H) H. The nitrogen has two dots at its bottom represents a lone pair of electrons. So ,the correct answer is option C.

The correct Lewis structure for ammonia (\(NH_3\)) is option C. It shows a bond line structure with three hydrogen atoms (H) bonded to a central nitrogen atom (N) in a linear plane.

One hydrogen atom branches upward from the plane. Additionally, the nitrogen atom in this structure has two dots at its bottom, indicating a lone pair of electrons. This arrangement follows the octet rule, as nitrogen has formed three covalent bonds with hydrogen, completing its valence shell. The lone pair on nitrogen gives ammonia its characteristic properties.

Thus, option C accurately represents the Lewis structure of ammonia, showing the bonding and lone pair arrangement of its atoms.

To know more about bond line structure:-

https://brainly.com/question/30639285

Answer:

It would be important because they will know if the water is infected by some type of disease or harmful bacteria

Explanation:

Finding dead insects or mouse droppings in the kitchen is an indication of pest infestation.

Pests are living organisms that are capable of spreading diseases, causing economic damages, or generally constituting nuisance to the environment.

Pest infestation occurs when there is a high number of pests in the environment. When this occurs, their activities are felt in the environment in terms of causing a nuisance, and damaging properties or contaminating foods.

More on pest infestation can be found here: https://brainly.com/question/13483095

Answer:

A. Hydrogen and oxygen combines in a constant mole ratio in all the three water samples

B. Carbon and oxygen are combined in a constant mole ratio in all the three samples of carbon dioxide

C. All pure samples of a compound contain the same elements combined in the same proportion by mass

D. Since the same elements are always combining to form a certain compound, and the atoms of each element has its own mass, the atoms of each element combining to form the compound do so in a fixed proportion by mass.

Explanation:

A. molar mass of hydrogen = 1.0 g/mol; molar mass of oxygen = 16 g/mol

The molar ratio of elements in a compound gives the proportion each element is combined with the other by mass.

molar ratio of hydrogen to oxygen in the samples:

Sample 1: Hydrogen; 1.5/1 = 1.5: Oxygen; 12/16 = 0.75

molar ratio = 1.5/0.75 = 2 : 0.75./0.75 = 1

molar ratio = 2:1

Sample 2: Hydrogen; 2/1 = 2: Oxygen; 16/16 = 1

molar ratio = 2/1 = 2 : 1/1 = 1

molar ratio = 2:1

Sample 3: Hydrogen; 2.5/1 = 2.5: Oxygen; 20/16 = 1.25

molar ratio = 2.5/1.25 = 2 : 1.25/1.25 = 1

molar ratio = 2:1

Hydrogen and oxygen combines in a constant mole ratio in all the three water samples

B. molar mass of carbon = 12 g/mol; molar mass of oxygen = 16 g/mol

molar ratio of carbon to oxygen in the samples:

Sample 1: Carbon; 0.5/12 = 0.04 : Oxygen; 1.3/16 = 0.08

molar ratio = 0.04/0.04 = 1 : 0.08/0.04 = 2

molar ratio = 1:2

Sample 2: Carbon; 1.0/12 = 0.083 : Oxygen; 2.7/16 = 0.168

molar ratio = 0.083/0.083 = 1 : 0.168/0.083 = 2

molar ratio = 1:2

Sample 3: Carbon; 1.5/12 = 0.125 : Oxygen; 4.0/16 = 0.250

molar ratio = 0.125/0.125 = 1: 0.250/0.125 = 2

molar ratio = 1:2

Carbon and oxygen are combined in a constant mole ratio in all the three samples of carbon dioxide

C. All pure samples of a compound contain the same elements combined in the same proportion by mass

D. Since the same elements are always combining to form a certain compound, and the atoms of each element has its own mass, the atoms of each element combining to form the compound do so in a fixed proportion by mass.

Answer:

Chemical energy

Explanation:

By the use of electrons and protons from water

Answer:

chemical energy

Explanation:

Photosynthesis is the process by which organisms that contain the pigment chlorophyll convert light energy into chemical energy which can be stored in the molecular bonds of organic molecules (e.g., sugars). Photosynthesis powers almost all trophic chains and food webs on the Earth.

The patterns of acid rain is best explained on the basis of it's ph observations.

Rain or any other form of precipitation that is unusually acidic, is referred to as acid rain (low pH). The Northeastern United States contains the regions with the highest levels of acidity (lowest pH values). The Northeast's concentration of industrial and power facilities, numerous cities, and dense population are to blame for this trend of high acidity.

Infrastructure, marine life, and plants can all be harmed by acid rain. Sulfur dioxide and nitrogen oxide emissions cause acid rain by reacting with the water molecules in the atmosphere to create acids. It has been noted that acid rain also has negative effects on forests, freshwaters, and soils. It also kills insect and aquatic life-forms, damages structures, and has an effect on human health.

To know more about acid rain, refer to the following link:

https://brainly.com/question/22143130

#SPJ1

Answer:

ok, here is your answer

Explanation:

AI-generated answer

To find the mass of oxygen that reacted, we need to use the Law of Conservation of Mass, which states that in a chemical reaction, the mass of the reactants equals the mass of the products.

First, we need to find the number of moles of hydrogen that reacted:

Molar mass of hydrogen (H₂) = 2.016 g/mol

Number of moles of H₂ = mass/molar mass = 46.2 g/2.016 g/mol = 22.92 mol

Next, we need to use the balanced chemical equation to find the number of moles of water produced:

hydrogen + oxygen → water

2H₂ + O₂ → 2H₂O

From the equation, we can see that for every 2 moles of H₂, 1 mole of O₂ is required to produce 2 moles of H₂O. Therefore, the number of moles of O₂ required to produce 22.92 moles of H₂O is:

Number of moles of O₂ = 1/2 x 22.92 mol = 11.46 mol

Finally, we can find the mass of oxygen that reacted by using its molar mass:

Molar mass of oxygen (O₂) = 32.00 g/mol

Mass of oxygen = number of moles x molar mass = 11.46 mol x 32.00 g/mol = 366.72 g

Therefore, the mass of oxygen that reacted is 366.72 g.

One structural difference between oligosaccharides and polysaccharides is their respective chain lengths. Oligosaccharides are composed of a relatively small number of monosaccharide units (typically 3 to 10), whereas polysaccharides consist of a larger number of monosaccharide units, often hundreds or thousands. This difference in chain length gives rise to variations in their properties and functions.

\(\huge{\mathcal{\colorbox{black}{\textcolor{lime}{\textsf{I hope this helps !}}}}}\)

♥️ \(\large{\textcolor{red}{\underline{\texttt{SUMIT ROY (:}}}}\)

Answer:

3.36 grams Al°(s)  

Explanation:

Given AlCl₃(s), determine the mass (grams) of Al°(s) produced from electrolysis of Aluminum Chloride at 10.0 amps for 1.00 hour.

AlCl₃(s) + 378.3°F (=192.4°C) => Al⁺³(l) + 3Cl⁻(l)

formula wt. Al° = 27g/mol

Faraday Constant (F°) = 96,500 amp·sec

? grams Al°(s) = 10.0amps x (1 mole e⁻/96,500amp-sec) x (1 mole Al°(s)/3 mole e⁻) x (27g Al°(s)/1 mole Al°(s)) x 3,600 sec = 3.36 grams Al°(s)

The 3.36 grams of aluminum are produced in 1 hour by the electrolysis of molten AlCl₃ when 10A current is passed.

Electrolysis is a process that uses an electrical current to break chemical compounds. The electric current is passed through the substance to bring the chemical change by gain or loss of electrons.

The electrolysis of the aluminum chloride in the molten state is represented as:

AlCl₃  →   Al³⁺    +  3Cl⁻

At cathode:   Al³⁺  +  3e⁻  →  Al (s)

Given,  the current. I = 10 A and  t = 1 hr = 3600 s

We know that the current is calculated from the equation:  I = q/t

q = I× t

q = (10A) × (3600s)

q = 36 × 10³ C

We know, 96500 C of the charge has electrons = 1 mol

36 × 10³ C of the charge has electrons  = 0.373 mol

3 moles of electrons required to produce aluminum = 1 mol

0.373 mol of electrons will produce aluminum = 0.373/3 = 0.124 mol

We know that, the mass of one mole of Al = 27g

The mass of 0.124 mol of Al = 27 × 0.124 = 3.36 g

Therefore, the aluminum produced in 1 hour by the electrolysis of molten AlCl₃ is equal to 3.36 grams.

Learn more about electrolysis, here:

https://brainly.com/question/12054569

#SPJ5

Answer:  The answer is \(8.4\times 10^8\)

Explanation:

Significant figures : The figures in a number which express the value -the magnitude of a quantity to a specific degree of accuracy is known as significant digits.

The rule apply for the multiplication and division is :

The least number of significant figures in any number of the problem determines the number of significant figures in the answer.

Thus for product of  \((2.1\times 10^3)\times (4\times 10^5)\)

In this problem, 2.1has 2 significant figures and 4 is an exact number with infinite significant digits thus product will have the least number of significant figures which is 2. So, the answer will be in 2 significant figures.

Therefore, the answer is \(8.4\times 10^8\)

Over-tilling and Over farming are the two processes that can harm the fertility of the soil.

Over-tilling refers to the exceeding levels of tilling and levelling the soil which adversely affects the quality of the soil. This is because tillage fractures the soil, it disrupts soil structure, accelerating surface runoff and soil erosion. Tilling of soil also reduces crop residue, which help cushion the force of pounding raindrops.

Without crop residue, soil particles become more easily dislodged, being moved or 'splashed' away. The splashed particles clog soil pores, effectively sealing off the soil's surface, resulting in poor water infiltration and hence subsequently affects the soil fertility.

Similarly, the main effect of over-farming is soil depletion. When crops are grown in the same place year after year, the soil becomes depleted of the nutrients that the plants need to grow. This can lead to lower yields and poorer quality crops. In extreme cases, it can lead to desertification.

So, these two are the processes that can harm soil fertility.

To know more about soil erosion, click below:

https://brainly.com/question/17905503

#SPJ9

Answer:

2.282 atm

P1V1/T1 = P2V2/T2

2.70atm / (50+273) = X/ 273

make x subject of formula

:. X = 2.28 atm

or 2.28 * 1.01 *10⁵ N/m²

you can support by rating brainly it's very much appreciated ✅✅

Answer:

The second period starts with Lithium and Beryllium which have 3 and 4 electrons and hence the last electrons enter the level 2s and they have an electronic configuration of 1s22s1 and 1s22s2

The copper itself can react with hydrogen

Here is the chemical reaction

2CuCl2(aq) + H2(g) -> 2CuCl(s) + 2HCl(g)

Answer:

The answer is B.

Explanation:

Systematic error arises from a faulty measuring device, imperfect observation methods, or an uncontrolled environment.

Answer:

your answer is a

Explanation: