What is the first thing you should do after retrieving a boat onto a trailer?
A.) Transfer all gear from the boat to the vehicle
B.) Check that the trailer lights are working
C.) Secure any items that are loose in the boat
D.) Pull the trailer well away from the boat ramp
Answers
Answer:
D.) Pull the trailer well away from the boat ramp
Explanation:
After retrieving a boat onto a trailer, the first thing you should do is move the trailer away from the boat ramp to allow other boaters to use the ramp. This helps maintain a smooth flow of traffic and prevents congestion. Once the trailer is in a safe location, you can then secure the boat to the trailer using straps or tie-downs. After securing the boat, you can proceed with other tasks such as transferring gear from the boat to the vehicle, checking trailer lights, and securing any loose items within the boat.
The first thing you should do after retrieving a boat onto a trailer is to pull the trailer well away from the boat ramp. Therefore option D is correct.
After retrieving a boat onto a trailer, the first thing you should do is pull the trailer well away from the boat ramp. This is important for several reasons:
1. Safety: Pulling the trailer away from the boat ramp ensures that you are not blocking the ramp, allowing other boaters to access the water. It helps maintain a smooth flow of traffic and prevents congestion and delays at the ramp.
2. Courtesy: By promptly moving the trailer away from the boat ramp, you show consideration for other boaters who may be waiting to launch or retrieve their boats. It is good boating etiquette to minimize the time spent at the ramp to allow others to use it efficiently.
3. Parking: Moving the trailer away from the ramp provides you with the opportunity to find a suitable parking spot for your trailer and vehicle.
It allows you to safely and securely park your trailer in an appropriate designated area, ensuring it is not obstructing traffic or creating any hazards.
Know more about retrieving a boat:
https://brainly.com/question/3937416
#SPJ2
Related Questions
Fill in the Blank: When using a standard cold chisel, be sure the end is grounded to a sharp point at a _____ degree angle.
Answers
Answer:
25°
Explanation:
At the factory, a standard cold chisel are ground to 25° which is appropriate for the various works performed by a chisel. However, A chisel with a 30° cutting edge is advisable to users because it will help the edge to last longer.
what is the scale if a 4-inch length on a drawing corresponds to a 4-foot length on the actual object?
Answers
If a 4-inch length on a drawing corresponds to a 4-foot length on the actual object, the scale factor is equal to 1 : 12.
What is a conversion factor?A conversion factor can be defined as a number that is typically used to convert (change) a number in one (1) set of units to another, either by dividing or multiplying.
Generally, an appropriate conversion factor to an equal value must be used when it is necessary to perform any mathematical conversion.
Conversion:
12 inches = 1 foot
X inches = 4 feet.
Cross-multiplying, we have:
X = 12 × 4
X = 48 inches.
For the scale factor, we have:
Scale factor = 4 : 48
Scale factor = 1 : 12.
Read more on scale factor here: brainly.com/question/2826496
#SPJ1
what is a compound gear used for creating the most torque
Answers
In short, a lower gear produces more torque at the wheel, as well as faster acceleration and lower vehicle speed. Higher gears result in less torque at the wheel, as well as slower acceleration and higher car speed.
What is torque?TORQUE (Terascale Open-source Resource and QUEue Manager) is a distributed resource manager that manages batch jobs and distributed compute nodes. Torque is a force that can cause an object to rotate around an axis. In the same way that force causes an object to accelerate in linear kinematics, torque causes an object to acquire angular acceleration. Torque is measured as a vector quantity. Torque is defined as a twisting or turning force that causes rotation around an axis, which could be a center of mass or a fixed point. Torque can also be defined as the ability of a rotating object, such as a gear or a shaft, to overcome turning resistance.To learn more about torque, refer to:
https://brainly.com/question/19104073
#SPJ1
Which of the following examples demonstrate qualifications that are most helpful for Engineering and Technology careers? Check all that apply.
Corey is a good driver, and has never had an accident.
Jayson is persistent, and doesn’t give up until he has solved a difficult problem.
Keri has good customer-service skills for being pleasant with customers.
Cleo is good at negotiating prices of products she is purchasing.
Dudley’s creativity helps him in designing new products.
Marisol is good at learning new things quickly.
Answers
Write a system of equations to describe the situation below, solve using any method, and fill in the blanks.
Nicole and Josie are both selling cookie dough for a fundraiser. Although Nicole has already sold 4 tubs, Josie hasn't sold any yet. If Nicole starts selling 5 tubs per day and Josie begins selling 6 tubs per day, they will eventually sell the same amount of cookie dough. How many tubs will each sell? How many days will that take?
Nicole and Josie will each sell
tubs of cookie dough in
days.
Answers
The number of tubs that each of them sold is; 24 tubs each
The number of days it will take for both of them to sell same amount of tubs is; 4 days
Number of cookies that Nicole had already sold = 4 tubs
Number of cookies sold by Josie before counting = 0 cookies
Nicole now sells 5 tubs per day and
Josie now sells 6 tubs per day.
Let the number of days it will take for them to have sold the same amount of cookies be d.
Thus;
5d + 4 = 6d + 0
6d - 5d = 4
d = 4 days
Thus, total number of cookies for both are;
Total for Nicole = 4 + 5(4) = 24 cookies
Total for Josie = 6(4) = 24 cookies
Read more about proportion at; https://brainly.com/question/870035
Microstructures are microscopic additions or forms in a system.
True
O False
Answers
Answer:
True
Explanation:
Microstructure is the very small scale structure of a material, defined as the structure of a prepared surface of material as revealed by an optical microscope above 25× magnification. ...
Answer:
Microstructure is the very small scale structure of a material, defined as the structure of a prepared surface of material as revealed by an optical microscope above 25× magnification. ... These properties in turn govern the application of these materials in industrial practice.
it will help you
You are driving on a two-way street, and are looking for a place to park;
Answers
Answer:
you cannot park
Explanation:
except you park in a compound because it is a two way road parking on either side could lead to accident or goslow
what is your favorite concole?
Answers
Answer:
Ps4
Explanation:
Answer:
ps4
Explanation:
5. In an automotive shop, asbestos is found in
A) O Oil
B) O Tires
CO Wiper fluid
Do Brake linings
Answers
In an automotive shop, asbestos is found in Brake linings.
What is Asbestos? Asbestos is a fibrous silicate material which was occurring naturally. These minerals have been used in construction and manufacturing for many reasons.In an Automotive shop, asbestos are used in wide variety of auto parts, including brakes, clutches, liners, gaskets, heat shields , etc.,.Drum brakes and disc brakes are usually manufactured using 30% to 60% of asbestos.Decal stripes, spark plugs, undercoating, Sound proofing, Insulation, etc., are also made up of asbestos.Old cars will contain more asbestos parts than new cars. Both professional auto mechanics and car owners who repair themselves are at an increased risk of developing mesothelioma and other asbestos-related diseases.Hence Option D is the correct answer.
Learn more about Asbestos,
https://brainly.com/question/8853025
#SPJ2
Answer:
D
Explanation:
Brake linings
Which software do you need to download to use the VEX IQ robot?
Answers
Answer:
VEXcode IQ software.Explanation:
You may programme and operate the VEX IQ robot using the block-based programming tool VEXcode IQ. You can programme the robot's behaviours and movements, such as moving forward, turning, and perceiving its environment, using VEXcode IQ. The programme may be downloaded from the VEX Robotics website and is compatible with Chrome OS, MacOS, and Windows.
To learn more about VEX IQ robot visit: https://brainly.com/question/14999216
construct a plain scale 30mm =10mm and 50mm long to read to one mm
Answers
follow these steps:
Start by cutting a strip of paper or cardstock to a length of 50mm. This will be the base of your scale.
On the left side of the strip, mark a point at the 0mm mark, this will be the starting point of your scale.
Using a ruler, mark off 10mm increments to the right. You will have a total of 5 marks (10mm, 20mm, 30mm, 40mm, and 50mm)
At the 30mm mark, mark a point that is 3mm to the right of the 30mm mark, this will be the end of your scale.
Lastly, use a ruler to divide each 10mm segment into 1mm increments. You will have a total of 30mm on your scale that can be read to 1mm.
Your scale should look like this:
0mm | 10mm | 20mm | 30mm | 30.3mm | 40mm | 50mm
It's important to note that this a plain scale and it does not have any graduation marks on it, it is intended to be used as a reference to measure the length of an object and compare it with the scale.
what would be the power required to exert 6-N force over 3 m in 2 seconds
A. 4w
B.6W
C.9W
D.12W
E.18W
Answers
Answer: 9 W
Explanation:
The power formula is P = W over time, and W is equal to force times distance.
So, let's find W first.
W = 6 * 3 = 18
Now, P is 18/2 = 9 W
In DC electrode positive, how much power is at the work clamp?
2/3 power
1/3 power
1/2 power
1/4 power
Answers
Answer:
1/3 power
Explanation:
I'm just a smart guy
Tech B says that long-term fuel trims that are positive means that the PCM is leaning out the fuel mixture from the base pulse-width setting. Who is correct
Answers
Long-Term Fuel Trim (LTFT) is a measure of the fuel mixture balancing actions taken by the engine computer over a longer period of time.
What is computer?Computer is defined as a digital electronic device that can be configured to automatically perform logical or mathematical operations in sequences (computation). A general-purpose computer is one that should be able to complete the majority of ordinary computing tasks given the right application and necessary time.
When the engine is running at a constant speed, long-term fuel cuts should be at or almost at 0%. The long-term fuel trim value will (and must) change as the engine speed changes, but as soon as the engine speed stabilizes, this value should go back to a value near to 0%.
Thus, Long-Term Fuel Trim (LTFT) is a measure of the fuel mixture balancing actions taken by the engine computer over a longer period of time.
To learn more about computer, refer to the link below:
https://brainly.com/question/21080395
#SPJ5
Please help me solve this! I will award brainest to who does it first.
Answers
Answer:
A
Explanation:
cause it satisfy 3 of the statment + if L1 or L2 is burn out the flow of current will not terminate
QUESTIONS
22
Brakes that automatically stop a trailer if it breaks away from the towing vehicle are required on
all trailers weighing
A: 3,000 pounds or more
B: 5,000 pounds or more.
C: 10,000 pounds or more
Answers
Answer:
According to many of the states' driving rules.
All vehicles of 3,000 pounds or more are required to have a brake system that makes them break as a response to the breaking of the vehicle's tow.
Explanation:
The reason behind this answer is that vehicles of more than 3,000 pounds are extremely dangerous and difficult to control. Therefore, when the tow breaks the automatic brake system is required. Because they are too big to be controlled, and if they are left without a brake system to reduce their damage they can destroy entire houses or other cars if this mechanism is not implemented.
The automatic brakes helps to stop a trailer from the towing vehicle and are these required on all trailers weighing 3,000 pounds or more.
What is the automatic braking system?The system is an advanced system that are designed to prevent collision or reduce speed of the moving vehicle.
The reason for this modern technology in trailers is because the vehicles of more than 3,000 pounds are extremely dangerous and difficult to control.
Therefore, when the tow breaks the automatic brake system gets into action.
Read more about automatic brakes
brainly.com/question/26004382
Discussion Topic
Please post detailed answers to the following questions. Please use complete sentences.
While working on a school assignment, you run into a problem with your monitor that you can’t seem to fix. You decide to call the Technical Support team to get help. In your conversation with the support team, they inform you that in order to fix the problem they will have need permission to have “remote access” to your computer. Describe what “remote access” is. List the advantages and dangers of allowing someone to have remote access to your device. Also, explain who you should or should not give remote access to.
Answers
1 pts
Question 8
If you feel vibration in the seat, from which area of the vehicle would the problem
most likely be coming from?
1. Rear
2. Front
Answers
Which of these performs the same function as gasoline in a car?
Water
Protein
Carbohydrates
Fats
Answers
Answer:
Carbohydrates
Explanation:
This is 100% correct. I hope this helps! :)
What types of problems might an electrical engineer need to solve?
Answers
Answer:
sectores industriales, comerciales o públicos, o para el uso doméstico.
Explanation:
مناهج العلوم الاجتماعية
Answers
يتضمن دراسة شبكة العلاقات الاجتماعية. يتطلب فهم المجتمع مدخلات من عدد من الموضوعات. ومن ثم ، فإن منهج العلوم الاجتماعية يحاول اتباع نهج متكامل يعتمد على مدخلات المعرفة في الأنثروبولوجيا وعلم الاجتماع والتاريخ والتربية المدنية والجغرافيا والاقتصاد
PLEASE HELP!! Its easy!!!
Answers
Answer:
C is tire
F is cassette
D is hub
Answer: give me brainliest, fellow hamster friend
Explanation:
An extended car warranty or vehicle contract could protect you against
Answers
Once a vehicle's factory warranty expires, you're responsible for the cost of any repairs the car may need, even if a defect or poor workmanship caused the failure. You can protect yourself from the cost of repairs with an extended warranty or service contract, though the added coverage can come with a high price tag.
What are the things that lower down on the back of the tractor and lift the weight slightly off the rear tires?
Answers
The hydraulic suspension lowers on the back of the tractor and is helpful in lifting the weights off the rear tires.
What is a hydraulic suspension?In the mechanism of a tractor, the use of rods and spring-balls are loaded inside the hydraulic cylinder, which in turn helps in lifting the heavy weights off the rear tires of the tractor.
Hence, the function of hydraulic suspension in a tractor is explained above.
Learn more about hydraulic suspension here:
https://brainly.com/question/20876092
#SPJ1
4. Fill in the blanks with the words from the Word Bank below.
Answers
Answer:
space race
cold war
lunar module
mission control
failure
success
hey seggsy engineering ppl help me pick out a class ring
im asking every subject and 2nd one seems to be the fan fav so far
Answers
Answer:
red pietersite
Explanation:
the stone is very pretty by itself and the black will make the color pop so it wont look plain, red and black is always a good combo
Per school policy, only 8 students can ride in 1 school van. If there are 72 boys and 75 girls, how many total vans are needed to get the students to the swimming contest?
Answers
If you only can have 8 students in each van you need to divide each number by 8. So 72/8 is 9 for the boys and 75/8 is 9.4 since this is over 9 you’ll need 10 for the girls.
A peak of 18v the resistance of the lamp is 4 what is the peak value of the current
Answers
The peak value of the current from the calculation that has been performed in the lines below is 4.5 A.
What is the meaning of the peak value of the voltage and current?The largest value that a voltage or current can achieve during a single cycle of an AC waveform is its peak value.
The peak value in a sinusoidal waveform is easily read off as the maximum point that we can see on the wave form that is shown for the circuit that is under consideration.
We know that;
Io = Vo/R
Io = Peak value of current
R = resistance
Vo = Peak value of voltage
Io = 18 V/4 ohm
Io = 4.5 A
Learn more about peak value:https://brainly.com/question/31829756
#SPJ1
Does the music contribute to the performance of its production?
samilanoJoan ako to si neil binondo
paki answer po sa akin ate jeann o ate joan or kahit ano jan... pls pls
Answers
Answer:
Of course music plays crucial role
The counterweight helps reduce the torque force on the mast.
Responses
True
False
Answers
The counterweight helps reduce the torque force on the mast is true.
What is meant by torque force?Torque is the rotating equivalent of force in physics and mechanics. The moment of force is another name for it. It illustrates how a force can cause a change in the body's rotational motion.The force that may twist an item about its axis is measured as torque. Torque is what causes an object to acquire angular acceleration, just as force is what causes an object to accelerate in linear kinematics. Being a vector quantity, torque. Torque is a twisting or turning force that frequently results in rotation around an axis, which may be a fixed point or the center of mass. A spinning object's capacity to overcome turning resistance, such as a gear or a shaft, is another way to conceptualize torque.To learn more about torque force refer to:
https://brainly.com/question/17512177
#SPJ1