Upon seizing a fake id, the alcohol establishment must give the fake id to local law enforcement authorities within.

The magnitude of the electric force on the charge is 5 N.

The magnitude of force on the charge is calculated as follows;

F = Eq

where;

F = 100 N/C  x 0.05 C

F = 5 N

Thus, the magnitude of the electric force on the charge is 5 N.

Learn more about electric force here: https://brainly.com/question/20880591

#SPJ1

Answer:

5n downward

Explanation:

took the assignment

C. They are probably the same temperature. it is likely that both the red book and the blue book are at the same temperature.

The color of an object does not inherently determine its temperature. The perceived color of an object is based on the wavelengths of light it reflects or absorbs. While different colors may have different abilities to reflect or absorb light, this does not necessarily indicate differences in temperature. Without additional information about the books or their exposure to external heat sources, it is reasonable to assume that both books sitting on the table would be at the same ambient temperature. In the absence of any specific heating or cooling mechanisms acting on the books, they would equilibrate with the surrounding environment and reach the same temperature over time.

Learn more about temperature here:

https://brainly.com/question/2386012

#SPJ11

The height of the 500-mb pressure level plotted at North Platte (LBF) in western Nebraska was 5,570 meters  m above sea level.

Pressure is the force applied perpendicular to the surface of an object per unit area over which that force is distributed.

Recalling that the heights plotted at individual stations on 500-mb maps are in tens of meters (place a 0 to the right of the three plotted digits).

The coded height at North Platte, in west-central Nebraska, ("557") indicated 500 mb occurred at 5,570 meters above sea level.

Thus, The height of the 500-mb pressure level plotted at North Platte (LBF) in western Nebraska was 5,570 meters  m above sea level.

Learn more about pressure here: https://brainly.com/question/25736513

#SPJ1

The astronaut on the moon feels a gravitational pull of 131.2 Newtons.

The relationship between an object's mass (m) and the gravitational acceleration (g) at that position yields the gravitational force (F) that the object experiences:

F = m x g

F = 82.0 kg x 1.60 m/s^2

F = 131.2 N

g e = 9.81 m / s 2. Change the values in the equation above. Change the value in the equation above. As a result, the mass of the moon remains constant at 100 kg/100 kg, and the weight of the body there is calculated to be 163.5 N.

to know more about  gravitational force here:

brainly.com/question/12528243

#SPJ1

Answer:

A. tracert

Explanation:

Tracert is a computer diagnostic command which displays possible routes for delays in packets of Internet Protocol (IP). Tracert command will display results for route which is recorded round trip times of packet.

Answer:

a

Explanation:

f=ma

200=2*m

divide both sides by 2

m=100

Assuming the light ray enters the glass from air at an angle, it will bend towards the normal (an imaginary line perpendicular to the surface of the glass) as it enters the glass due to the decrease in speed.

Once inside the glass, the light ray will continue to travel in a straight line until it reaches the other side of the glass. As it exits the glass and enters air again, it will bend away from the normal due to the increase in speed.

Overall, the path of the light ray will be bent twice, once when it enters the glass and again when it exits the glass, due to the change in the speed of light in the two different media.

Learn more about light ray Visit: brainly.com/question/30614297

#SPJ4

Answer:

They both have the same GPH

Explanation:

GPE = mgh

m = mass of Claire

2m = mass of Jared

h = height of Claire

h/2 = height of Jared

GPE-jared = (2m)(g)(h/2) = mgh

GPE-claire = mgh

They both have the same GPH

The mass of E is 28/3, and the center of mass is located at (35/36, 0, 7/4).

We can use the triple integral to find the mass and center of mass of the solid E:

The limits of integration for x are from 0 to 5z.

The limits of integration for y are from −1 to 1.

The limits of integration for z are from 0 to 1 − y²

The density function is given by ρ(x, y, z) = 7.

Thus, the mass of E is given by:

M = ∭E ρ(x, y, z) dV

= ∭E 7 dV

= ∫₀⁵z ∫₁⁻¹ ∫₀¹−y² 7 dz dy dx

= 28/3

The x-coordinate of the center of mass is given by:

x-bar = (1/M) ∭E xρ(x, y, z) dV

= (1/M) ∭E x(7) dV

= (1/M) ∫₀⁵z ∫₋₁¹ ∫₀¹−y² x(7) dz dy dx

= 35/36

Similarly, the y-coordinate of the center of mass is given by:

y-bar = (1/M) ∭E yρ(x, y, z) dV

= (1/M) ∭E y(7) dV

= (1/M) ∫₀⁵z ∫₋₁¹ ∫₀¹−y² y(7) dz dy dx

= 0

And, the z-coordinate of the center of mass is given by:

z-bar = (1/M) ∭E zρ(x, y, z) dV

= (1/M) ∭E z(7) dV

= (1/M) ∫0^5z ∫−1^1 ∫0^1−y^2 z(7) dz dy dx

= 7/4

For more questions like Mass click the link below:

brainly.com/question/16968386

#SPJ11

Modeling is a way to represent or depict a particular idea or concept. It involves creating a simplified version or simulation that captures the essential features or behavior of the idea or concept being studied. Through modeling, complex systems or phenomena can be more easily understood, analyzed, and communicated.

It provides a visual or mathematical framework that allows researchers, scientists, or engineers to explore, predict, or test hypotheses related to the idea or concept. By using various modeling techniques and tools, such as mathematical equations, computer simulations, or physical prototypes, the behavior and properties of the idea or concept can be studied and evaluated. Modeling plays a crucial role in many fields, including science, engineering, economics, and social sciences, as it facilitates the exploration and comprehension of complex systems and phenomena.

Learn more about modeling and its applications here:

brainly.com/question/32196451

#SPJ11

Answer:

See the answer below

Explanation:

This is because, at 20 °C, the solution has become saturated with the baking soda.

The solubility of a substance is the maximum amount of that substance that will dissolve in a particular solvent at a given temperature. The solubility of a substance generally increases with an increase in temperature.

At 20 °C temperature, the maximum amount of baking soda that can dissolve in a liter of water has been exceeded by Miguel. Hence, no matter how hard he tries to stir the solution, the excess baking soda will not dissolve.

The reason he can’t get all of the baking soda to dissolve is; because at 20 °C, the solution has become saturated with the baking soda.

For us to say a substance is soluble, it means that the maximum amount of that substance will dissolve in a particular solvent at a given temperature. Thus, the solubility of a substance is said increase with a corresponding increase in temperature.

From the question, at 20 °C temperature, miguel has exceeded the maximum amount of baking soda that can dissolve in a liter of water. Therefore, no matter how hard he tries to stir the solution, it will not dissolve due to the excess soda.

Read more about saturated solution at; https://brainly.com/question/4529762

Physical rules are observed during star formation, such as conservation of momentum, where accumulations of gas and dust collapse under the influence of gravity and begin to create stars.

The events listed must be in the following order for star formation: Clouds contract when subjected to gravity. The main star produces a breeze. Due to static electricity, lumps are formed. As the angular momentum is conserved, a disk is formed.

Collisions are the origin of planetesimals. As nuclear reactions proceed, stars are born.

The process of star formation takes about a million years from the time the first gas cloud begins to compress to the point where stars form and begin to shine like the sun.

To know more about star formation, visit,

https://brainly.com/question/7467199

#SPJ4

Answer:

2.3 kg m/s

Explanation:

\(\\ \tt\longmapsto Momentum=mv\)

\(\\ \tt\longmapsto Momentum=(40)(33)\)

\(\\ \tt\longmapsto Momentum=1320kgm/s\)

\(\large{\purple{\underline{\underline{\sf{\pink{ANSWER-}}}}}}\)

Let us classify the given data first,

The standard way for calculating momentum of a body is given by,

\(\Rrightarrow\tt{Momentum = mass \times velocity}\)

\(\Rrightarrow\tt{Momentum = m \times v}\)

\(\Rrightarrow\tt{Momentum = 40 \times 33}\)

\(\Rrightarrow\tt{Momentum = 1320 kgm/s}\)

\(\large{\purple{\underline{\underline{\sf{\pink{MORE \: CONCEPTS \: TO \: LEARN-}}}}}}\)

1) MOMENTUM (P) -

2) MASS (M) -

3) VELOCITY (V) -

Possible terminal voltages are 6 - 1.5 =4.5 V or 6+1.5 = 7.5 V.

Voltage is the pressure from an electrical circuit's power supply that pushes charged electrons (present-day) thru an undertaking loop, enabling them to do work that includes illuminating a light. In quick, voltage = stress, and it's far measured in volts (V).

There are styles of voltage, DC voltage, and AC voltage. The DC voltage (direct modern-day voltage) usually has the same polarity (positive or poor), which includes a battery. The AC voltage (alternating current voltage) alternates between nice and bad.

Voltage, electric-powered capacity difference, electric-powered stress, or electric-powered anxiety is the difference in electric-powered capacity among points, which is defined as the work needed in step with a unit of charge to move a take a look at a rate between the two factors.

Learn more about voltage here https://brainly.com/question/14883923

#SPJ4

The wavelength of the light beam having a frequency of 6 × 1017 hz is 0.05 nm.

To calculate the wavelength of a light beam, we can use the formula:

λ = c/f

Where λ is the wavelength, c is the speed of light and f is the frequency of the light.

The speed of light is approximately 3 x 10^8 m/s, we can use this value to find the wavelength.

λ = c/f

λ = (3 x 10^8 m/s) / (6 x 10^17 Hz)

λ = 0.05 nm

So the wavelength of the light beam is 0.05 nm.

It's important to mention that the wavelength is inversely proportional to the frequency, meaning if the frequency is high the wavelength is short and if the frequency is low the wavelength is long.

For more questions like Wavelength click the link below:

https://brainly.com/question/28781717

#SPJ4

With 4.3 m/s velocity, is the cheetah running.

velocity= distance/time

distance=27.6 m

time=6.3 s

velocity=27.6 m/6.3 s

velocity=4.3 m/s

A vector number known as velocity describes "the pace at which an item changes its location." Imagine a person moving quickly, taking one stride ahead, one step back, and then beginning from the same place each time. A vector quantity is velocity. As a result, velocity is aware of direction. One must consider direction while calculating an object's velocity. Saying that an item has a velocity of 55 miles per hour is insufficient. The direction must be included in order to adequately characterize the object's velocity. Simply said, the velocity vector's direction corresponds to the motion of an item.

To know more about  velocity visit : brainly.com/question/16379705

#SPJ9

Answer:

1.2 m/s^2

Explanation:

average acceleration = vf-vi/t = (15 m/s-0 m/s)/10 s = 1.2 m/s^2

Answer:

A 50 g particle that can move along the x-axis experiences the net force Fx=2.0t2N, where t is in s. The particle is at rest at t = 0 s. What is the particle's speed at t = 2.8 s?

Explanation:

salamat sa points

The velocity of the particle at time t equals to 2.8 seconds will be 0.29 m/s.

A force whose magnitude or direction or both changes with time is called time varying force.

Given is a 50 g particle that can move along the x-axis. It experiences a net force of F[x] = 2t². The particle is at rest at t = 0 s.

The time varying force is given by -

F[x] = 2t²

m a[x] = 2t²

m dv[x]/dt = 2t²

m dv[x] = 2t²dt

dv[x] = (2t²/m) dt

∫dv[x] = ∫(2t²/m) dt

v = (2/m) ∫t² dt        {from t = 0 to t = 2.8}
v = (2/m) [t³/3]        {from t = 0 to t = 2.8}

v = (2/m) [2.8³/3]

v = (2/m) x 7.31

v = 14.63/m

v = 14.63/50

v = 0.29 m/s

Therefore, the velocity of the particle at time t equals to 2.8 seconds will be 0.29 m/s.

To solve more questions on Laws of motion, visit the link below-

https://brainly.com/question/10897988?referrer=searchResults

#SPJ2

The speed of the coin just before it hits the ground dropped from a height of 80 m will be 40 m / s

The total PE at the greatest height = The K.E just before it touches the ground

PE = m g h

KE = 1 / 2 * mv²

PE = Potential energy

KE = Kinetic energy

m = Mass

g = Acceleration due to gravity

h = Height

v = Final velocity

h = 80 m

g = 10 m / s²

PE = KE

m g h = 1 / 2 * mv²

m * 10 * 80 = 1 / 2 * m * v²

v² = 800 * 2

v = √ 1600

v = 40 m / s

Potential energy is the energy at rest and kinetic energy is the energy in motion. Potential energy is maximum at rest and when the object starts to move, it potential energy drops and it kinetic energy rises.

Therefore, the speed of the coin just before it hits the ground is 40 m / s

To know more about kinetic energy

https://brainly.com/question/999862

#SPJ1

Answer:

(B)

Explanation:

Because what ever angle the surface is, the light will reflect of of it perpendicular.

Answer:

12.7 m

Explanation:

The following data were obtained from the question:

Initial velocity (u) = 56.7 Km/hr

Maximum height (h) =..?

First, we shall convert 56.7 Km/hr to m/s. This can be obtained as follow:

Initial velocity (m/s) = 56.7 x 1000/3600

Initial velocity (m/s) = 15.75 m/s

Next, we shall determine the time taken to get to the maximum height. This can be obtained as follow:

Initial velocity (u) = 15.75 m/s

Final velocity (v) = 0 m/s

Acceleration due to gravity (g) = 9.8 m/s²

Time (t) =?

v = u – gt (since the ball is going against gravity)

0 = 15.75 – 9.8 × t

Rearrange

9.8 × t = 15.75

Divide both side by 9.8

t = 15.75/9.8

t = 1.61 secs.

Finally, we shall determine the maximum height as follow

h = ½gt²

Acceleration due to gravity (g) = 9.8 m/s²

Time (t) = 1.61 secs.

Height (h) =..?

h = ½gt²

h = ½ × 9.8 × 1.61²

h = 4.9 x 1.61²

h = 12.7 m

Therefore, the maximum height reached by the ball is 12.7 m

Answer:

Studies show that eating fewer animal-based products could reduce water use since animal production uses more water than crops do. In addition, reducing the amount of food that's lost or wasted at various points in the food supply chain could feed about 1 billion extra people while simultaneously reducing water use.

The process is non-stationary because these are greater than one in modulus.  The forecasts of Yn+1, Yn+2, Yn+3 is 3 +0.9 (115.76) + 0.1(111.38) +0 - 0.2(En)

i) We are given the ARMA(2,1) model as follows:

Yt=3+0.9Yt-1+0.1Yt-2+Et-0.2Et-1

To check if the process is stationary, let us find the roots of the characteristic equation.

1-0.9B-0.1B²=0

Solving, we get B = 1.05, -0.4762

These are greater than one in modulus.

Therefore, the process is non-stationary.

ii) We are given the values Yn−2 = 101, Yn−1 = 99.5, Yn = 102.3 and En-1 = 1.

2. The model equation is

Yn = 3+0.9Yn-1+0.1Yn-2+En-0.2En-1

Substituting the given values, we get

Yn = 3+0.9(99.5)+0.1(101)+1.2-0.2(-1.2)

= 106.58

To find Yn+1, Yn+2, Yn+3, we need to use the model equation.

Yn+1=3+0.9Yn+0.1Yn-1+En-0.2En-1

Substituting the value of Yn, we get

Yn+1=3+0.9(106.58)+0.1(99.5)+1.2-0.2(1.2)

= 111.38

Similarly,Yn+2=3+0.9Yn+1+0.1Yn+En-0.2En-1

=3+0.9(111.38)+0.1(106.58)+1.2-0.2(1.2)

= 115.76Yn+3

=3+0.9Yn+2+0.1Yn+1+En-0.2En

=3+0.9(115.76)+0.1(111.38)+0-0.2(En)

Learn more about modulus -

brainly.com/question/30402322

#SPJ11

Answer:

position speed and direction

Explanation:

hope that helps =)

also i love your profile pic i love fnaf myself!!!!

Changes in relative humidity are more common than changes in dew point. Assuming dew point to be relatively constant over a 24-hour period,  relative humidity values ​​change regularly throughout the day as temperatures rise and fall.

When the temperature and dew point are close, the relative humidity is higher than when the  temperature and dew point are far apart. At the same temperature and dew point, the air is "saturated" and the relative humidity is 100%.

Clouds form when the  temperature drops below the dew point. On the ground, temperatures often drop below the dew point, such as during heavy rains or  foggy mornings.

The "relative humidity" of  air describes the relationship between temperature and dew point.

Read more about dew point, humidity and temperature at:

brainly.com/question/29769017

#SPJ4

Frosted glass is made of glass with a scratched surface and it is translucent because of its partial transparency.

Technically speaking, frosted glass is a transparent sheet of glass that has been etched or sandblasted to become opaque. The glass appears translucent as a result of light scattering during transmission, obstructing visibility even while light is transmitted through it.

Therefore, Translucent materials include certain polymers and frosted glass. Only a portion of the light that strikes transparent materials goes through. The materials prevent the light from passing through them directly.

Learn more about translucent material from

https://brainly.com/question/11362698
#SPJ1

The following is true about a comet that is on an elliptical orbit around the sun is b. The comet's speed is greatest when it is nearest the sun.

A comet is an object in space with a visible coma or atmosphere, along with a "tail" that can extend for millions of miles through space. A comet's orbit is elliptical or oval-shaped; that is, it is more elliptical or oval-shaped than a planet's or moon's orbit.

As a result, when it approaches the sun, its velocity increases.When the comet is closest to the sun, its speed is greatest. This is due to the fact that as a comet travels closer to the sun, it falls under the sun's gravitational pull, causing its speed to increase. As a result, the comet's velocity at its closest approach to the sun is the highest.

Learn more about comet at:

https://brainly.com/question/12443607

#SPJ11