To pass another vehicle safely at 55MPH, how far do you need?
- 1,000 feet
1,600 feet
- 2,500 feet
10,000 feet
Answers
Answer:
pretty sure its 10,000 feet
Explanation:
Related Questions
purpose of all components in a water level sensor
Answers
Answer:
A combination of high and low sensors are used to tell the control panel when water levels are too high or too low. The control panel will then automatically turn the pump on or off depending on the corrective action needed.
Explanation:
purpose of all components in a water level sensor
What material is the Mars Rover made of?
Answers
Explanation:
Like a car body, the rover's aluminum shell is a strong outer layer that keeps the vehicle's vital and sensitive electronics protected and temperature controlled. “NASA could not have made it to the surface of Mars without aluminum.”
hope this helps you.
it is made with aluminum it has a aluminum shell
You are driving on a two-way street, and are looking for a place to park;
Answers
Answer:
you cannot park
Explanation:
except you park in a compound because it is a two way road parking on either side could lead to accident or goslow
_________ is an art form in which the focus is to make life and society better.
Answers
Engineering is an art form in which the focus is to make life and society better.
What exactly do engineers do?In addition to designing machines, erecting buildings, and managing public works, engineers also handle a wide range of social issues. Engineers work on medication delivery methods that operate inside cells at the molecular level.The majority of us would put it squarely in the latter category since, with the proper application of particular guidelines and considerations, it is a large field of study founded on mathematical and scientific concepts.Engineering sketching is a lovely synthesis of art and science that has the capacity to transform your ideas into tangible outcomes. It is an art since it uses complicated drawing that is done frequently.To learn more about Engineers refer,
https://brainly.com/question/28902900
#SPJ1
In badminton, the top of the net, at center, is how high off the floor?.
Answers
Answer: Badminton nets are regulated at a height of 5'1” (1.55 m) at the edges of the court and 5' (1.52 m) at the center of the court.
-Hope this helps<3
Answer:
5'
Explanation:
help
Zander described the similarities and differences between flowering and non-flowering plants. Read the following passage and find the mistakes.
"A daisy is a non-flowering, seed-bearing plant, while a pine tree produces flowers. Both the daisy and the pine tree go through the four major stages of the life cycle, which includes the seed stage, sprouting stage, seedling stage, and the final stage, which is the adult stage. During each stage of the life cycle, the two plants have different shapes and textures. As adult plants, the daisy produces seeds in the cone, and the pine tree produces seeds in the flower."
What statement corrects the errors in Zander's passage?
A.A daisy is a flowering plant, and a pine tree is a non-flowering, cone-bearing plant. During the adult stage, the daisy produces seeds in the flower and the pine tree produces seeds in the cone.
B. As adult plants, the daisy sprouts seedlings, which are then reproduced. During the adult stage, the pine tree grows spores, which are reproduced.
C.The daisy and the pine tree have different stages in their life cycles. The daisy completes the seedling stage before the sprouting stage. The pine tree has a fertilization stage when seeds are produced.
D.The daisy and the pine tree both have the same life cycles, but the daisy produces seeds in the seedling stage, and the pine tree produces seeds in the sprouting stage.
Answers
Answer:
A
Explanation:
daisies are flowering plants
1. Using Kirchhoff's Laws what is the voltage of the power supply E?
100 V
+
E = ?
75 V
150 V
25 V
Answers
Answer:
rfffrffffffgggggtgggffExplanation:
ggggggtttggfgcfffyggvyggggggghgggggggggvggvb.vh
mhn
h
u
The department of motor vehicles can suspend the license of any person that has accumulated
Answers
That statement is false in most states.
Any citizen within the jurisdiction, whether male or female, adult or minor, may accumulate at any time, or refrain from accumulating, as much or as little as he or she wishes.
Such a decision on the part of the citizen is of no interest or concern to the Department of Motor Vehicles.
Note: This Brainly answer is not intended as legal advice. You are responsible for confirming the legality of your decisions and actions with local counselors within the jurisdiction of your own country, state, province, county, city, village, hamlet, or settlement. Moreover, minors are advised to confirm them with their parents or guardians.
That statement is false in most states. Any citizen within the jurisdiction, whether male or female, adult or minor, may accumulate at any time, or refrain from accumulating, as much or as little as he or she wishes.
What is Motor vehicles?Such a decision on the part of the citizen is of no interest or concern to the Department of Motor Vehicles.
A motor vehicle, often referred to as a motorized vehicle or an automotive vehicle, is a self-propelled land vehicle, typically with wheels, that is used for the movement of people or goods and does not run on rails (unlike trains or trams).
An engine or motor, typically an internal combustion engine or an electric motor, or any mix of the two, such as hybrid electric vehicles and plug-in hybrids, provides the vehicle's propulsion.
Therefore, That statement is false in most states. Any citizen within the jurisdiction, whether male or female, adult or minor, may accumulate at any time, or refrain from accumulating, as much or as little as he or she wishes.
To learn more about Vehicle, refer to the link:
https://brainly.com/question/24745369
#SPJ2
Using the state mileage guide table located on the top of each map page you can
quickly determine...
A. The grid coordinate needed to locate a city on a given map
B. The distance between key cities within the same state
C. Route and roadways defined as class I highways
D. Low clearance location
Answers
Why should a driver conduct a pre-entry check?
Answers
Answer:Why should a driver conduct a pre-entry check? Allows the driver to check for anyone behind the vehicle, Allows the driver to check for low or flat tires, Allows the driver to check for leaking fluids.
Explanation:
50 POINTS! - How to find scale of a design to real life?
(QUESTION EXPLANATION/CONTEXT)
So I have a culminating project and we need to make a 3D model of a bus shelter. My bus shelter is 14 inches high in the 3D modelling editor and supposed to be 157 inches in real life. I need the scale for that size. I am not sure how to find it. If you need any additional info about the design, just comment and I'll send it. ty!
Answers
To find the scale of your 3D model in relation to real life, you can use the following formula:
Scale = Real Life Size / Model Size
In your case, the real-life size of the bus shelter is given as 157 inches, and the model size is 14 inches. Plugging these values into the formula:
Scale = 157 inches / 14 inches
Scale ≈ 11.21
Therefore, the scale of your 3D model would be approximately 1:11.21. This means that one unit in your 3D model represents 11.21 units in real life. To convert any measurements from your 3D model to real-life measurements, you would multiply them by the scale factor.
which of the time periods below corresponds to a recession
Answers
A recession is a period of economic downturn, typically characterized by a decline in the gross domestic product (GDP), high unemployment, and a decrease in business activity. Recessions are generally considered to be a normal part of the economic cycle, and they can occur at various times and for various reasons.
It is not possible to determine which of the time periods listed below corresponds to a recession without more information. To determine whether a particular time period experienced a recession, it is necessary to consider a range of economic indicators, such as GDP, unemployment, business activity, and other factors.
Explain, using at least three reasons, why Timothy would fail to be a good match as a mechanical engineer in the following scenario.
Situation: Timothy is a very shy, reserved person. He is very artistic and creative, but math and science were never his strong subjects. As he enrolls in college classes, he is looking to be exposed to many different careers. He would like to go to an office every day, complete his work, and leave with a sense of accomplishment. He does not enjoy long-standing projects and assignments.
Answers
What advice would you give to the company that wants to build a skyscraper in California? Make sure to include whether there is anything the company should change about its design and materials. Give specific examples. Your answer should include at least five complete sentences.
Answers
In order to begin building construction, it is essential to adhere to all California's edicts and regulations, as this state requires strict compliance with seismic laws and environmental concerns for constructing high-rises.
What will be the advice?It is imperative that you acquire the valid documentation and permissions given by pertinent authorities.
Moreover, it is sensible to reflect upon the regional meteorological patterns and geological conditions. Since California is renowned for robust earthquakes and devastating fires, the edifice must be engineered to endure these potential disasters. .
Learn more about company on
https://brainly.com/question/24553900
#SPJ1
Electrical Engineering dates back to which century?
Answers
All of the statements are true EXCEPT:
Select one:
A. Pascal's law is the principle behind hydraulic brakes.
0 B. varying amounts of mechanical force can be extracted from a single
amount of hydraulic pressure.
C. the smaller brake caliper pistons on the front wheels give greater
mechanical force and braking power to the front wheels.
O D. a power booster is fitted to the brake system to increase the driver's
brake pedal force to the master cylinder.
Answers
Answer:
the smaller brake caliper pistons on the front wheels give greater mechanical force and braking power to the front wheels.
All of the aformentioned statements are correct and true except: C. the smaller brake caliper pistons on the front wheels give greater mechanical force and braking power to the front wheels.
What is a braking system?A braking system can be defined as a mechanical system which comprises various components that are designed and developed to bring an automobile vehicle in motion to a stop, when applied by a driver.
Basically, the principle behind hydraulic braking system is Pascal's law, which states that a varying degree of mechanical force can be generated from an amount of hydraulic pressure.
Read more on braking system here: https://brainly.com/question/24751467
in the grid (us) the transmission lines: a. none of the choices are correct b. only connects the generator substations to load centers. c. connect the generator substations to distribution substations but are not connected to each other at any specific location. d. not only connect the generator substations to load centers but also are connected to each other at specific locations called interconnects. e. connect the generator substations to distribution substations but are not connected to each other at any specific location except if the run as parallel circuits.
Answers
A National Grid substation is a sizable facility where 275 kV and 400 kV subterranean cables and overhead power lines are switched, and where electricity is converted to 132 kV for distribution to nearby communities.
Although not all substations have all of the above capabilities, substations are made to do the following tasks: Increase or decrease the voltage. To account for variations in system voltage, regulate the voltage. Switch the grid system's transmission and distribution circuits in and out. Through transmission and distribution power lines, power plants produce electricity that is then distributed to clients. Electricity is transported over vast distances to satisfy consumer needs using high-voltage transmission lines, including those that dangle between tall metal towers.
Learn more about transmission here-
https://brainly.com/question/14725358
#SPJ4
Perchuty (P. z fan ce the Treffe resistivalyThe law of resistivity.
Answers
We can see here that the law of resistivity, also known as Ohm's law, states that the electrical resistance of a conductor is directly proportional to its resistivity and length, and inversely proportional to its cross-sectional area.
How is law of resistivity represented?The Law of resistivity can be mathematically represented as:
R = ρ × (L / A)
Where:
R is the electrical resistance of the conductor,
ρ (rho) is the resistivity of the material,
L is the length of the conductor, and
A is the cross-sectional area of the conductor.
The resistivity (ρ) is a characteristic property of a material that quantifies its ability to resist the flow of electric current. It depends on the nature of the material, its temperature, and sometimes its purity. Resistivity is measured in ohm-meters (Ω·m).
Learn more about resistivity on https://brainly.com/question/30611906
#SPJ1
what is a compound gear used for creating the most torque
Answers
In short, a lower gear produces more torque at the wheel, as well as faster acceleration and lower vehicle speed. Higher gears result in less torque at the wheel, as well as slower acceleration and higher car speed.
What is torque?TORQUE (Terascale Open-source Resource and QUEue Manager) is a distributed resource manager that manages batch jobs and distributed compute nodes. Torque is a force that can cause an object to rotate around an axis. In the same way that force causes an object to accelerate in linear kinematics, torque causes an object to acquire angular acceleration. Torque is measured as a vector quantity. Torque is defined as a twisting or turning force that causes rotation around an axis, which could be a center of mass or a fixed point. Torque can also be defined as the ability of a rotating object, such as a gear or a shaft, to overcome turning resistance.To learn more about torque, refer to:
https://brainly.com/question/19104073
#SPJ1
Please help me solve this! I will award brainest to who does it first.
Answers
Answer:
A
Explanation:
cause it satisfy 3 of the statment + if L1 or L2 is burn out the flow of current will not terminate
Which of the following is a career within the Maintenance and Operations pathway?
Painters
Precision layout workers
Cost estimators
Graphic designers
Answers
Answer:
A.) Painters
Explanation:
It's your definite answer!
Answer:
A.painters
enjoy your day
What is the time of use billing in electricity (a sentence).
Answers
Answer:Time-of-use billing is a pricing structure for electricity that charges different rates for electricity consumption based on the time of day it is used.
Explanation:
what is
\(34 \div 34\)
Answer
one because when you divide any number by the same number the answer is one
Answers
Answer:
1
Explanation:
because every time you dived a number by its own number it is 1
Answer:
1
Explanation:
34 divided by 34 is one.
Describe the purpose of the SPST 12 volt DC master switch
Answers
The SPST 12-volt DC master switch is used to turn on and off the power to a device.
What is device?
A device is a physical piece of hardware or software that performs one or more computational functions within a computer system. It can either offer input to the computer or accept output from it. A device is any electronic element that has some computational capability and can install firmware or third-party software. A computer mouse, speakers, printer, and microphone are examples of common hardware. A device is sometimes known as an appliance, gadget, or electronic instrument.
The purpose of the SPST 12 volt DC master switch is to provide a way to turn on and off the power to a device. This switch is typically used to control the power to a lights or other electrical devices.
To learn more about device
https://brainly.com/question/24786034
#SPJ13
when the filament breaks in one lamp in a series circuit, other lamps in the circuit normally _________.
Answers
Answer:
when the filament breaks in one lamp in a series circuit, other lamps in the circuit normally stop working.
Explanation:
describe four precautions and the reasons why they must be adhered to when conducting the compression test
Answers
The precautions to be followed when conducting a compression test are:
Warm up the engine to its normal operating temperature before the test.Disable the ignition system to prevent the engine from starting during the test.Remove all spark plugs from the engine before conducting the test.Keep the throttle wide open (fully depressed) during the compression test.What is compression testWhile doing the compression test, it is very important to keep the throttle fully open. This action lets a lot of air go into the engine, which makes the pressure inside the engine higher. If you keep the throttle open, it stops any pressure from building up which could mess up the test results.
Following these precautions when doing a compression test keeps the person doing the test safe, stops any harm to the engine, and gives accurate information for figuring out the engine's condition. Compression tests are important tests that help mechanics find problems with engine parts like valves, piston rings, and cylinder heads. This helps them fix the issues better.
Read more about compression test here:
https://brainly.com/question/552895
#SPJ2
Question* Once we have have completed the excavation , constructed forms for our footing and properly installed the rebar , what is the next step in the construction ?
NEED HELP ASAP
Answers
Concreting of Column and Bitumen Paint Applications
Does your school need an updated recycling program? Would you or the students like to have healthier lunch options in the cafeteria? Identify a problem you would like to solve in your school. Write a project charter and present it to a teacher or the principal.
Assignment Directions
The 300 word project charter should contain a checklist and pertinent sections. The charter will focus on a problem in the school that affects a community of students, rather than just one group. It will include a proposed budget and schedule. Information can be based on interviews with school staff or students.
Assignment Guidelines
Using the information from the research, your project charter should contain the following information:
Executive summary
Project overview
Objectives
Project team
Requirements
Constraints
Assumptions
Deliverables
Schedule
Budget
Authorization
Submission Requirements
Use standard English and write full phrases or sentences. Do not use texting abbreviations or other shortcuts.
Make the information easy to understand.
Answers
Note that the 300 word project charter is given as follows.
What is the project charter describeld above?Project Charter: Improving the Recycling Program and Lunch Options in Our School
Executive Summary: Our school community needs an updated recycling program and healthier lunch options. Currently, the recycling program is outdated and difficult to use, and the cafeteria menu lacks healthy options. This project aims to address these issues by creating a more efficient and effective recycling program and providing healthier lunch options.
Project Overview: This project will involve updating the school's recycling program and menu options in the cafeteria. The goal is to create a more sustainable and healthier environment for the school community. The project will be completed in four stages: planning, implementation, monitoring, and evaluation.
Objectives:
• To increase the rate of recycling in the school by 50% within the next academic year
• To introduce at least two healthy meal options in the cafeteria per week
• To reduce the amount of waste generated by the cafeteria by 30% within the next academic year
Project Team:
• Project Manager: [Name]
• Recycling Coordinator: [Name]
• Cafeteria Manager: [Name]
• School Administrators: [Names]
• Student Representatives: [Names]
Requirements:
• Improved recycling bins and signage
• Purchase of compostable plates, utensils, and cups for the cafeteria
• Introduction of healthy menu options
• Staff training on how to manage recycling and composting programs
• Student education on recycling and composting
Constraints:
• Limited budget for the project
• Limited space in the cafeteria for new menu options
Assumptions:
• The school community is supportive of improving the recycling program and lunch options
• The necessary funding will be provided by the school
Deliverables:
• Improved recycling program and increased rate of recycling
• Healthier menu options in the cafeteria
• Reduced waste generated by the cafeteria
Schedule:
• Planning Stage: 2 weeks
• Implementation Stage: 3 months
• Monitoring Stage: Ongoing
• Evaluation Stage: 1 month
Budget:
• Recycling bins and signage: $500
• Compostable plates, utensils, and cups: $800
• Staff training: $300
• Marketing and education materials: $200
Authorization: This project is authorized by [Name of Principal]. The project team will be responsible for ensuring the project is completed within the allotted time and budget. Regular progress reports will be provided to the school administration and student representatives.
Learn more about Project Charter at:
https://brainly.com/question/29899562
#SPJ1
Technician a says that when more air is entering a spray booth than is removed it is considered to have negative pressure technician b say the negative air pressure draws more overspray through spray booth filters than positive air pressure Who’s right
Answers
In a spray booth, when the amount of air entering the booth is greater than the amount of air being removed, it is considered to have positive pressure. Conversely, when the amount of air being removed is greater than the amount of air entering, it is considered to have negative pressure. Therefore, Technician A's statement is incorrect.
On the other hand, Technician B's statement is correct. Negative air pressure can draw more overspray through spray booth filters because it creates a vacuum effect that draws in the overspray and helps prevent it from escaping into the rest of the work area. This is why spray booths are designed to have a negative pressure differential to help control overspray and keep the work environment safe.
Technician A is correct in stating that when more air is entering the spray booth than is being removed, it is considered to have negative pressure. Negative pressure means that the pressure inside the spray booth is lower than the pressure outside. This setup helps to contain the overspray and fumes within the booth, minimizing the risk of spreading them to the surrounding areas.
Technician B is also correct in stating that negative air pressure draws more overspray through the spray booth filters than positive air pressure. When the spray booth has negative pressure, it creates a suction effect. This suction draws the overspray particles towards the filters, improving their efficiency in capturing and removing the overspray from the air.
In summary, both technicians are correct in their statements. The negative pressure in the spray booth helps contain the overspray, and it also enhances the effectiveness of the booth's filters in capturing the overspray particles.
name a type of
• plane. not a model one word hyphenated but two words total
Answers
Answer: Commercial planes