The following signals are 2-D in space and 1−D in time, so they are 3-D signals. Is each of these 3 -D signals: - Analog or digital? - Continuous or discrete? (a) The world as you see it *(b) A movie stored on film (c) A movie stored on a DVD
Answers
When analyzing signals, we need to determine whether they are analog or digital, and continuous or discrete. This helps us understand how the information is represented and processed.
(a) The world as you see it:
The world you see around you is perceived by your eyes as a continuous signal in both space and time. It is an analog signal because it does not have a specific number of defined levels, and it varies continuously.
The world as you see it is an analog and continuous signal.
(b) A movie stored on film:
A movie stored on film is a continuous signal in space since the images are captured on a continuous medium (the film). However, it is discrete in time as the film consists of a series of individual frames that are displayed in sequence.
A movie stored on film is an analog and discrete signal.
(c) A movie stored on a DVD:
A movie stored on a DVD is digital because the information is encoded in a binary format (0s and 1s). In terms of spatial information, the movie is discrete as it consists of individual pixels. Similarly, it is also discrete in time since the movie is divided into separate frames.
A movie stored on a DVD is a digital and discrete signal.
To learn more about signals, visit:
https://brainly.com/question/14699772
#SPJ11
Related Questions
For each of the following problems: design an exhaustive search or optimization algorithm that solves the problem; describe your algorithm with clear pseudocode; and prove the time efficiency class of your algorithm.
When writing your pseudocode, you can assume that your audience is familiar with the candidate generation
algorithms in this chapter, so you can make statements like "for each subset X of S" without explaining the
details of how to generate subsets.
a)The Pythagorean triple problem is:
input: two positive integers a, b with a < b
output: a Pythagorean triple (x, y, z) such that x, y and z are positive integers, a ≤ x ≤ y ≤ z ≤ b, and
x2 +y2=z2 or None if no such triple exists.
Answers
We can iterate through all possible combinations of integers within the given range and check if they satisfy the Pythagorean theorem condition.
How can we solve the Pythagorean triple problem using an exhaustive search algorithm?To solve the Pythagorean triple problem using an exhaustive search algorithm, we can iterate through all possible combinations of integers (x, y, z) within the given range a ≤ x ≤ y ≤ z ≤ b.
For each combination, we check if it satisfies the Pythagorean theorem condition x² + y² = z² . If a valid triple is found, we return that triple; otherwise, we return None if no such triple exists.
function pythagoreanTriple(a, b):
for x from a to b:
for y from x to b:
for z from y to b:
if x² + y² == z² :
return (x, y, z)
return None
```
The time efficiency class of this algorithm is O((b-a)³) since it involves three nested loops that iterate from a to b. As the range (b-a) increases, the number of iterations and the time complexity of the algorithm grows cubically.
Learn more about Pythagorean
brainly.com/question/28032950
#SPJ11
What material is best for weed grinder?
Answers
Two of the greatest materials for cannabis grinders are aluminum and zinc. Aluminum is available in a range of shapes and sizes, is lightweight, and is inexpensive. Aluminum grinders are also lightweight and inexpensive, but zinc grinders are far more robust.
Are grinders made of metal or plastic better?Metal grinders are stronger, more stable, and more consistent. They are made to durable and can withstand a variety of dry herb consistencies.
What qualities do weed grinders have?Use a metal grinder if you're seeking for a straightforward solution. For grinding homegrown marijuana, many individuals prefer a typical aluminum three-chamber grinder. It is strong, simple to maintain, barely detectable, and portable. Moreover, the grinder has a magnetic cover that aids in maintaining its tight closure.
To know more about materials visit:-
https://brainly.com/question/13044444
#SPJ4
Technician A says ABS systems provide superior directional stability when the brakes are applied while turning a corner. Technician B says ABS systems provide superior braking when driving on loose snow. Who is correct
Answers
Both technicians A and B are partially correct, because it's important to note that ABS is not a foolproof solution in all driving situations and should not be relied upon as a substitute for proper driving techniques and caution.Technician A is partially correct in that ABS (Anti-lock Braking System) can improve directional stability. Technician B is also partially correct in that ABS can improve braking performance on loose snow.
Both technicians are partially correct, but neither is entirely accurate.
Technician A is partially correct in that ABS (Anti-lock Braking System) can improve directional stability when the brakes are applied while turning a corner, especially on slippery or uneven road surfaces. The system can prevent the wheels from locking up and skidding, which can cause the vehicle to lose control. However, it's important to note that ABS does not necessarily guarantee superior directional stability in all situations, and the driver should still exercise caution and proper driving techniques when turning.
Technician B is also partially correct in that ABS can improve braking performance on loose snow, as the system can help prevent the wheels from locking up and losing traction. However, other factors such as tire type and condition, road gradient, and vehicle weight distribution can also impact braking performance on loose snow.
Therefore, both technicians are partially correct, but it's important to note that ABS is not a foolproof solution in all driving situations and should not be relied upon as a substitute for proper driving techniques and caution.
For such more questions on stability
https://brainly.com/question/1403056
#SPJ11
Lydia is the CEO for a large pharmaceutical manufacturer. Her company is in the final stages of FDA
approval for a new drug for diabetics. The new drug is expected to bring in billions of dollars for the company. Lydia is acquainted with Bradley,
the CSHO on rotation for OSHA inspections. Lydia is concerned that a surprise inspection may turn up violations, which could affect the launch of
the drug. Lydia reaches out to Bradley and casually mentions that it would be helpful if he could tell her when the next OSHA inspection will be
Should Bradley give Lydia advance notice about an upcoming inspection?
No, because he could receive fines and a jail term.
No, because this situation does not meet the criteria for advance notice.
Yes, because employers may request an OSHA inspection at any time.
Yes, because the inspection will be conducted during regular business hours.
Answers
It is a criminal offense for any person to give unauthorized advance notice of an OSHA inspection.
how to calculate the factor of your grade safety. explain
Answers
Answer:
To divide the ultimate (or maximum) stress by the typical (or working) stress.
Explanation:
Hopes this helps :)
Numerical Methods for Engineers and Scientists 3rd Edition – An Introduction with Applications Using MATLAB - Gilat | Subramaniam Problem 3.29 A quarterback throws a pass to his wide receiver running a route. The quarterback releases the ball at a height of hQ . The wide receiver is supposed to catch the ball straight down the field 60 ft away at a height of hR .
The equation that describes the motion of the football is the familiar equation of projectile motion from physics: y = x tan(θ) - 1/2[x2 g/v02 cos2(θ)] + hQ where x and y are the horizontal and vertical distance, respectively, g = 32.2 ft/s2 is the acceleration due to gravity, v0 is the initial velocity of the football as it leaves the quarterback's hand, and θ is the angle the football makes with the horizontal just as it leaves the quarterback's throwing hand. For g = 32.2 ft/s², v0 = 50 ft/s, x = 60 ft, hQ = 6.5 ft, and hR = 7 ft, find the angle θ at which the quarterback must launch the ball.
Solve Problem 3.29 utilizing Newton’s Method, Secant Method, Bisection method and Regula Falsi method Print table for each method include relative error and real error and how many iterations for convergance. Use MATLAB built-in function fzero to determine the true value and add this result to the data table or list. Provide the graph that shows the solution only
Answers
The outputs of the Regula Falsi technique, including the number of iterations, the approximate value, the relative error, and the real error, are output in a table as a result.
How to solve% Constants
g = 32.2; % acceleration due to gravity in ft/s^2
v0 = 50; % initial velocity of the football in ft/s
x = 60; % horizontal distance in ft
hQ = 6.5; % height of the quarterback's release point in ft
hR = 7; % height of the receiver in ft
% Equation of projectile motion
f = (theta) x*tan(theta) - (1/2)*((x^2)*g/(v0^2)*(cos(theta))^2) + hQ - hR;
%Regula Falsi method
a = 0;
b = pi/2;
tolerance = 1e-6;
max_iterations = 100;
i = 0;
while i < max_iterations
i = i + 1;
c = b - f(b)*(b-a)/(f(b)-f(a));
if abs(f(c)) < tolerance
break;
end
if f(c)*f(a) < 0
b = c;
else
a = c;
end
end
True value using fzero
theta_true = fzero(f, [0 pi/2]);
Print table
fprintf('Regula Falsi Method:\n');
fprintf('Iterations: %d\n', i);
fprintf('Approximate Value: %f\n', c);
fprintf('Relative Error: %f\n', abs(theta_true-c)/theta_true);
fprintf('Real Error: %f\n\n', abs(theta_true-c));
Plot solution
theta = linspace(0, pi/2, 1000);
y = f(theta);
plot(theta, y, 'b-', c, f(c), 'ro');
xlabel('Angle (radians)');
ylabel('Height (ft)');
title('Projectile Motion of a Football');
legend('f(\theta)', 'Approximate Solution');
grid on;
The actions needed to solve the issue are as follows:
Use the parameters provided to define the equation that captures the motion of the football.
To locate the equation's root, define the Regula Falsi method function.
Decide on the root's starting boundaries, which are angles 0 and 90.
Calculate the angle at which the quarterback must launch the ball using the Regula Falsi method.
Utilise the MATLAB function fzero to determine the angle's actual value.
For each approach, print a table with the number of convergence iterations, relative error, and real error.
Create a graph that just displays the answer.
.
Read more about Matlab here:
https://brainly.com/question/13715760
#SPJ1
Using the 25 (7.5 m) tap rule, what is the minimum size copper THWN conductor required for a tap from a 400A, 480V, three- phase feeder? a. No. 1 b. No. 2 c. 1/0 d. 270 wine load
Answers
Option c. Using the 25-foot (7.5-meter) tap rule, the minimum size copper THWN conductor required for a tap from a 400A, 480V, three-phase feeder is 1/0
1. According to the National Electrical Code (NEC) Article 240.21(B)(1), the tap rule allows conductors to be sized at no less than one-third the rating of the overcurrent protection device (OCPD) if the tap does not exceed 25 feet (7.5 meters).
2. Calculate the minimum conductor ampacity by dividing the feeder's rating by 3:
Minimum Conductor Ampacity = 400A / 3 = 133.33A
3. Check the NEC Table 310.15(B)(16) to find the appropriate conductor size that can carry at least 133.33A of current. In this case, you will find that a 1/0 copper conductor with THWN insulation can handle 150A, which is sufficient for the tap.
So, the minimum size copper THWN conductor required for a tap from a 400A, 480V, three-phase feeder using the 25-foot (7.5-meter) tap rule is 1/0.
Learn more about "tap rule" at: https://brainly.com/question/30755849
#SPJ11
Statement and decision testing exercise
Scenario: A vending machine dispenses either hot or cold drinks. If you choose a hot drink (e.g. tea or coffee), it asks if you want milk (and adds milk if required), then it asks if you want sugar (and adds sugar if required), then your drink is dispensed.
a. Draw a control flow diagram for this example. (Hint: regard the selection of the type of drink as one statement.)
b. Given the following tests, what is the statement coverage achieved? What is the decision coverage achieved? Test 1: Cold drink Test 2: Hot drink with milk and sugar
c. What additional tests would be needed to achieve 100% statement coverage? What additional tests would be needed to achieve 100% decision coverage?
Answers
To achieve 100% statement coverage, additional tests are needed to cover different combinations of drink preferences (milk and sugar). For 100% decision coverage, tests should cover both the selection of drink type and the decisions related to adding milk and sugar.
a. Control Flow Diagram:
Start
|
V
Choose Drink Type (Hot or Cold)
|
V
IF Hot Drink
| |
| V
| Ask for Milk Preference
| |
| V
| IF Milk Required
| | |
| | V
| | Add Milk
| | |
| | V
| | Ask for Sugar Preference
| | |
| | V
| | IF Sugar Required
| | | |
| | | V
| | | Add Sugar
| | | |
| | | V
| | V
| V
| Dispense Hot Drink
|
V
ELSE (Cold Drink)
|
V
Dispense Cold Drink
|
V
End
b. Given the tests:
Test 1: Cold drink
Test 2: Hot drink with milk and sugar
Statement Coverage achieved: The statement coverage achieved would be 10 out of 15 statements (66.7%).
Decision Coverage achieved: The decision coverage achieved would be 2 out of 3 decisions (66.7%).
c. Additional tests for 100% statement coverage:
Test 3: Hot drink without milk and sugar
Test 4: Hot drink with milk only
Test 5: Hot drink with sugar only
Test 6: Hot drink without milk and without sugar
Additional tests for 100% decision coverage:
Test 7: Cold drink
Test 8: Hot drink with milk and sugar
Test 9: Hot drink without milk and sugar
For more such questions on combinations visit:
https://brainly.com/question/31277307
#SPJ8
discuss the difference between a dual split and a diagonal split master cylinder.
Answers
Answer:
The difference between the dual split Master cylinder and diagonal split Master cylinder is dual split it makes power brakes less prone to failure while diagonal split is when the left rear and right front brakes are on one hydraulic line while the right front and left rear brakes are on another.
The distinction between a diagonal split and a dual split master cylinder Power brakes are less likely to fail when the master cylinder is dual split, while diagonal splitting occurs when the left rear and right front brakes are connected to one hydraulic line while the right front and left rear brakes are connected to another.
What is meant by master cylinder?The hydraulic pump in a car's braking system, which includes a cylinder and one or more pistons and pushes hydraulic fluid under pressure to the brakes at each wheel, is activated by pressing the brake pedal.
In order to convert the pressure on the brake pedal to hydraulic pressure, the master cylinder, also known as the master brake cylinder, feeds brake fluid into the brake circuit and regulates this in accordance with the mechanical force.
Thus, The distinction between a diagonal split and a dual split master cylinder Power brakes are less likely to fail.
For more details about master cylinder, click here:
https://brainly.com/question/15707688
#SPJ2
For welding the most important reason to use jigs and fixtures in a welding shop is to
Answers
Answer:
Reduce manufacturing costs.
Explanation:
Hope This Helps
Have A Great Day
You should always try to put out a fire if you see one, no matter how large it is.
Answers
Answer:
That's not true, if your house is burning down, leave. Let the firefighters do their jobs.
Explanation:
Six 15-HP continuous-duty motors are connected to a common 480-volt feeder. The nameplate of each motor indicates: Full load amps 18.6, NEMA Code B, and SF 1.10. The conductors supplying each motor are to be copper with THHN insulation, and the feeder conductors supplying all motors are to be copper with THHN insulation. What size conductor should be used to supply each motor and what size conductor should be used for the feeder conductor
Answers
The size conductor that should be used to supply each motor is 12 AWG and the size conductor that should be used for the feeder conductor is 1/0AWG.
Size conductora. Using NEC table 430.250
Running connect for 150HP connected to 460V = 21 A
Conductor size=25% current to 125% current (Increase)
Increase current=21×125/100
Increase current=26.25 A
Nearest standard conductor size using NEC table 310.15(B)(16)=25 A
Since the motor contain NEMA design code the conductor will be choosing from 75° column which means that the size conductor that should be used to supply each motor is 12AWG copper conductors.
b. Feeder conductor
Using NEC section 430.24 plus ampere rating of other motors
Running current
Using NEC Table 430.250
Running current=26.25+21+21+21+21+21
Running current=131.25 A
The value that is greater than 131.25 A under 75° column of NEC Table 310 (B)(16) is 150 A which means that the size conductor that should be used for the feeder conductor is 1/0 AWG conductors.
Therefore the size conductor that should be used to supply each motor is 12 AWG and the size conductor that should be used for the feeder conductor is 1/0AWG.
Learn more about size conductor here: https://brainly.com/question/14825264
#SPJ1
ultium platform-based vehicles can be configured with as many as three electric motors. when two motors are combined, what is the rated horsepower?
Answers
The rated horsepower of two combined electric motors on a Sultium platform-based vehicle is up to 160 hp.
Sultium platform-based vehicles offer a range of electric motor configurations, from single motors to as many as three motors. When two electric motors are combined, the rated horsepower is up to 160 hp. This provides a significant boost in power and performance for the vehicle, allowing for faster acceleration, increased torque, and improved overall handling. With this increased power, the vehicle is able to reach higher top speeds, with a maximum speed of up to 250 km/h, making it suitable for both highway and off-road use. The two combined electric motors also provide greater efficiency than a single motor, helping to reduce emissions while still providing an impressive amount of power.
Learn more about horsepower: https://brainly.com/question/29611111
#SPJ4
A major contributor to product defects in electronic modules relates to stresses induced during thermal cycling (intermittent heating and cooling). For example, in circuit cards having active and passive components with materials of different thermal expansion coefficients, thermal stresses are the principal source of failure in component joints, such as soldered and wired connections. Although concern is generally for fatigue failure resulting from numerous excursions during the life of a product, it is possible to identify defective joints by performing accelerated thermal stress tests before the product is released to the customer. In such cases, it is important to achieve rapid thermal cycling to minimize disruption to production schedules.
A manufacturer of circuit cards wishes to develop an apparatus for imposing rapid thermal transients on the cards by subjecting them to forced convection characterized by a relation of the form Nuj = CRemPr", where m=0. 8 and n=0. 33. However, he does not know whether to use air (k = 0. 026 W/mK, v= 1. 6x105m²/s, Pr=0. 71) or a dielectric liquid (k=0. 064 W/m-K, v= 109 m²/s, Pr=25) as the working fluid. Assuming equivalent air and liquid velocities and validity of the lumped capacitance model for the components, obtain a quantitative estimate of the ratio of the thermal time constants for the two fluids.
Required:
What fluid provides the faster thermal response?
Answers
A manufacturer of circuit cards aims to develop an apparatus for subjecting them to rapid thermal transients using forced convection, characterized by the relation Nuj = CRemPr^m, where m = 0.8 and n = 0.33.
To achieve rapid thermal cycling and minimize disruption to production schedules, the manufacturer needs an apparatus that can impose controlled thermal stresses on the circuit cards. Forced convection, which involves the movement of fluid (air or liquid) over the surface of the cards, is an effective method for achieving rapid heat transfer.
The relation Nuj = CRemPr^m is a dimensionless correlation equation known as the Nusselt number correlation. It relates the Nusselt number (Nu) to the Reynolds number (Re) and the Prandtl number (Pr). The Nusselt number represents the convective heat transfer coefficient, which determines the rate of heat transfer between the fluid and the surface. The Reynolds number characterizes the flow regime, indicating whether the flow is laminar or turbulent, while the Prandtl number represents the ratio of momentum diffusivity to thermal diffusivity of the fluid.
In the given relation, the values of m = 0.8 and n = 0.33 determine the correlation exponents. These values have been determined through experimental data and are specific to the system being studied. The manufacturer needs to determine the appropriate values of the constant C based on the specific conditions and characteristics of their apparatus and circuit cards.
By using the Nuj = CRemPr^m relation, the manufacturer can design and optimize their thermal cycling apparatus to achieve the desired rapid thermal transients. This will allow them to perform accelerated thermal stress tests on the circuit cards, identifying any defective joints or potential failure points before the product is released to the customer. Implementing such tests in the manufacturing process will help ensure the reliability and quality of the electronic modules, reducing the risk of failures caused by thermal cycling-induced stresses.
Learn more about manufacturer here
https://brainly.com/question/29054304
#SPJ11
A site is underlain by a soil that has a unit weight of 118 lb/ft3. From laboratory shear strength tests that closely simulated the field conditions, the total stress parameters were measured to be C total = 250 lb/ft2 and φ total = 29°. Estimate the shear strength on a horizontal plane at a depth of 12 ft below the ground surface at this site in lbs/ sq ft
Answers
Answer: the shear strength at a depth of 12 ft is 1034.9015 lb/ft²
Explanation:
Given that;
Weight of soil r = 118 lb/ft³
stress parameter C = 250 lb/ft²
φ total = 29°
depth Z = 12 ft
The shear strength on a horizontal plane at a depth of 12ft
ζ = C + δtanφ
where δ = normal stress
normal stress δ = r × z = 118 × 12 = 1416
so
ζ = C + δtanφ
ζ = 250 + 1416(tan29°)
ζ = 250 + 1416(tan29°)
ζ = 250 + 784.9016
ζ = 1034.9015 lb/ft²
Therefore the shear strength at a depth of 12 ft is 1034.9015 lb/ft²
A gaseous isomerization reaction at 1 bar occurs as shown below Isomeri → Isomer 2 The heat of reaction for this system is small an equal to 1kJ/mol for this reaction at 298K. And heat capacity data for each is given as Cp,1 = 20J/(mol · K) and Cp,2 = 25J/(mol··K). What is the expected heat of reaction for this isomerization at 398K?
Answers
The expected heat of reaction for the isomerization reaction at 398K can be calculated using the equation:
ΔH = ΔCp(T2 - T1)
where ΔH is the change in enthalpy, ΔCp is the difference in heat capacity between the two isomers, T2 is the final temperature (398K), and T1 is the initial temperature (298K).
To calculate the expected heat of reaction for the isomerization at 398K, we first need to determine the difference in heat capacity between the two isomers.
ΔCp = Cp,2 - Cp,1
ΔCp = 25J/(mol·K) - 20J/(mol·K)
ΔCp = 5J/(mol·K)
Next, we can use the equation:
ΔH = ΔCp(T2 - T1)
Substituting the given values, we get:
ΔH = 5J/(mol·K) x (398K - 298K)
ΔH = 5J/(mol·K) x 100K
ΔH = 500J/mol
Since 1 kJ/mol is equal to 1000J/mol, we can convert the answer to kJ/mol:
ΔH = 500J/mol / 1000J/kJ
ΔH = 0.5kJ/mol
Therefore, the expected heat of reaction for the isomerization at 398K is 0.5kJ/mol.
Learn more about the isomerization reaction: https://brainly.com/question/30897046
#SPJ11
the output bimetallic element is
a pressure
b voltage
c mechanical strain
d mechanical displacement
Answers
Answer:
maybe the answer to your question is pressure. hope it helps
When a process is in a state of statistical control, all of the points on a control chart should fall within the control limits. However, it is undesirable that all of the points should fall extremely near, or exactly on, the centerline of the control chart. Why?
Answers
it is undesirable that all of the points should fall extremely near, or exactly on, the centerline of the control chart Because:
It can make it difficult to interpret patterns and draw conclusions in a run chart.It can lead hinder the process, and make it unstable.When a data point falls outside the control limits of a run chart ?If a data point falls is said to outside the control limits, we can say that the process is said to be out of one's control and it is good that an investigation is done to ascertain and remove the cause or causes.
So, it is undesirable that all of the points should fall extremely near, or exactly on, the centerline of the control chart Because:
It can make it difficult to interpret patterns and draw conclusions in a run chart.It can lead hinder the process, and make it unstable.Learn more about data point from
https://brainly.com/question/3514929
#SPJ1
A heat engine with a thermal efficiency of 25% is connected to an electric generator with an efficiency of 95%. A liquid fuel providing heat is consumed at 2.29 litres per hour. What is the power output in kW from the generator?
Heat of Combustion: 43.7 MJ/kg
Density of the fuel: 0.749 g/ml
Answers
Answer:
4.94 kW
Explanation:
The heat energy produced by the fuel in one hour is ...
(2.29 L/h)(0.749 kg/L)(43.7 MJ/kg) = 74.954677 MJ/h
Then the power output is ...
(74.954677 MJ/h)(1 h)/(3600 s) = 20.8207 kJ/s
Multiplying this heat energy by the efficiencies of the processes involved, the output power is ...
(20.8207 kW)(0.25)(0.95) = 4.94 kW
Technician A says ASE certification is mandatory in all 50 states before performing an automotive repair for pay. Technician B says automotive training programs must be reviewed every 3 years to be recertified. Who is correct?
Answers
Answer:
Technicians A is correct
Explanation:
According to ASE ( Automotive service excellence) "Certification credentials are valid for five years. If it has been five years or more since you took a test, it’s time to register for the corresponding Recertification Test. The five-year requirement ensures certified professionals are current in this rapidly changing industry."
This counters the claim of technician B who say the programs must be reviewed every three years , and ASE sends you reminders before your credentials expire.
A comparison of parking fee changed at 4 randomly selected parking areas were 12 15 17 and 20 pesos per car find the mean the variance of the parking fees
Answers
The calculated mean value is 16. The sum of all values divided by the total number of values determines the mean (also known as the arithmetic mean, which differs from the geometric mean) of a dataset.
The term "average" is frequently used to describe this measure of central tendency. By dividing the sum of the given numbers by the entire number of numbers, the mean—the average of the given numbers—is determined. Mean is equal to (Sum of All Observations/Total Observations).
Mean=12+15+17+20/4
=16
Special road signage designate 10-cent zones. At the beginning and finish of the zone, there are signs. There is one space available for as long as three or four hours each day. Only specific hours of the day are subject to the 10 cent rate. There may be a Blue Zone in locations where paid parking is not (yet) in effect.
Learn more about mean here-
https://brainly.com/question/14882017
#SPJ4
On 2023 z with a manual transmission. When the clutch is engaged, what is the first step to shift into reverse?
Answers
The first step that is needed in order to shift the reverse would be to Push down on the shift lever.
What is meant by a manual transmission?This is the term that is used in driving to explain the scenario that occurs due to the fact that a person has to go through a system of changing gears while they are driving. An example of how this is used is when a person says that there car has a manual transmission instead of automatic transmission.
This would mean that this person would be the one that would be changing the gears while driving on their own. To do this what would be done is to Push down on the shift lever.
Read more on driving here: https://brainly.com/question/1557131
#SPJ1
What are some sources of resistance? (Check all
that apply.)
worn or damaged cables
loose cable connections
weak springs on work clamps
painted surfaces
rusty tables
Answers
Answer:
All of them.
Explanation:
I take this class rn too and those are answers
Select all the correct answers. What are two reasons why the terrestrial planets formed closer to the sun after a supernova event that initiated the formation of the solar system?
Answers
Which is an example of poor sportsmanship?
A.Yelling at the referee
B.Helping a player off the field
C.Encouraging a teammate
D.Cleaning up equipment
Answers
Answer:
A
Explanation:
Answer:
the answer is a
Explanation:
poor sportsmanship is a terrible thing and will decrease team moral while great sportsmanship is help each other and staying positive on and off the field
: A rigid tank contains water vapor at 300°C and an unknown pressure. When the tank is cooled to 150°C, the
vapor starts condensing. Estimate the initial pressure in the tank.
Answers
The initial pressure in the tank can be estimated as approximately 1.356 times the pressure at 150°C.
The initial pressure in the tank can be estimated using the ideal gas law and the given temperature change.
To estimate the initial pressure in the tank, we can use the ideal gas law equation:
PV = nRT
Where:
P is the pressure,V is the volume of the tank (assumed constant),n is the number of moles of water vapor,R is the ideal gas constant, andT is the temperature in Kelvin.Given that the tank initially contains water vapor at 300°C (573 K) and is cooled to 150°C (423 K) when the vapor starts condensing, we can assume that the volume and number of moles remain constant.
Using the ideal gas law, we can set up the following equation:
P1V = P2V
Since V is constant, we can simplify the equation to:
P1 = P2(T1 / T2)
Substituting the given temperatures, we have:
P1 = P2(573 K / 423 K)
By evaluating the ratio of temperatures, we find:
P1 ≈ P2(1.356)
Therefore, the initial pressure in the tank can be estimated as approximately 1.356 times the pressure at 150°C.
For more questions on initial pressure
https://brainly.com/question/14914505
#SPJ8
what is it called when an unauthorized person views, alters, or steals secured data?
A) data breach
B) asynchronous communication
C) key escrow
D) sequence flow
Answers
The unauthorized access, alteration, or theft of secured data is called a data breach.
A data breach refers to an incident where confidential or sensitive information is accessed or stolen by unauthorized persons. The stolen information can include personal information such as social security numbers, bank account details, passwords, and credit card numbers. The consequences of data breaches can be significant, leading to financial loss, identity theft, and other security breaches. Data breaches can occur due to various reasons such as weak passwords, hacking, phishing, or malware attacks. It is crucial for organizations to implement robust security measures to prevent data breaches and protect their sensitive information from unauthorized access.
Learn more about hacking here: brainly.com/question/32140208
#SPJ11
Sadie is the props manager for a small community theater. Because she does not have a part onstage, Sadie is not part of the Performing Arts pathway of the Arts, AV Technology and Communication cluster.
True
False
Answers
Answer:
I think it is false!
Explanation:
Answer: I think it's true
Explanation:
Because if you were part of a play, you would have a part but if you work on props, you don't have a part onstage.
how many grams of aluminium with a dislocation density of 10 12 m/m3 are required to give a total dislocation length that would stretch rom new york city to oklahoma kilometers
Answers
Determining the amount of aluminum required to achieve a specific dislocation length is not possible without more information on crystal structure and material dimensions.
The amount of aluminum required to achieve a specific dislocation length cannot be determined based on the information provided. The dislocation density of 10^12 m/m^3 only provides information on the concentration of dislocations in the material, but it does not give any information on the actual length of the dislocations. Additionally, the comparison to the distance between New York City and Oklahoma is not relevant in this context, as dislocations are three-dimensional structures within the material and not a two-dimensional line. To determine the total dislocation length, one would need to know the crystal structure and dimensions of the material in question.
Learn more about type of aluminum here:
https://brainly.com/question/9496279
#SPJ4
Write an Essay describing in your own words, the two-way Communication Cycle naming all the stages and explaining what goes on at each stage. Illustrate any two barriers that may occur at each of the stages. A correctly labelled diagram is essential for your essay.
Answers
n
e
g
r
o
means black in spanish!