Suggested Time to Spend: 25 minutes. Note: Turn the spelling checker off (if it is on). If you change your answer box to the full screen mode, the spelling checker will be automatically on. Please turn it off again Q5: Write a full C++ program that will read the details of 4 students and perform the operations as detailed below. Your program should have the following: 1. A structure named student with the following fields: a) Name - a string that stores students' name b) ID - an integer number that stores a student's identification number. c) Grades- an integer array of size five (5) that contains the results of five subject grades d) Status - a string that indicates the students status (Pass if all the subject's grades are more than or equal to 50 and "Fail" otherwise) e) Average - a double number that stores the average of grades. 2. A void function named add_student that takes as an argument the array of existing students and performs the following a) Asks the user to input the student's Name, ID, and Grades (5 grades) and store them in the corresponding fields in the student structure b) Determines the current status of the inputted student and stores that in the Status field. c) Similarly, find the average of the inputted grades and store that in the Average field. d) Adds the newly created student to the array of existing ones 3. A void function named display which takes as a parameter a student structure and displays its details (ID. Name, Status and Average). 4. A void function named passed_students which displays the details (by calling the display function) of all the students who has a Status passed. 5. The main function which a) Calls the add_student function repeatedly to store the input information of 4 students. b) Calls the passed_students function. Example Run 1 of the program: (user's inputs are in bold) Input student details Name John Smith ID: 200 Grades: 50 70 81 80 72 Name: Jane Doe ID: 300

The model that predicts the duration of a contest as a function of the value of the resource is called the "Tullock's rent-seeking model".

This model was introduced by Gordon Tullock in 1967 and is widely used in political science and economics to understand how individuals and organizations compete for resources. In this model, individuals invest time and resources in order to win a contest, with the winner taking the entire prize. The duration of the contest is determined by the number of participants and the value of the prize, with larger prizes leading to longer contests. The model has been used to analyze a wide range of phenomena, from political lobbying to sports competitions.

To know more about Tullock's rent-seeking model, visit:

brainly.com/question/23844578

#SPJ11

Answer:

hello your question is incomplete attached below is the complete question

answer : attached below

Explanation:

let ; x(t)  be a real value signal for x ( jw ) = 0 , |w| > 200\(\pi\)

g(t) = x ( t ) sin ( 2000 \(\pi t )\)

\(x_{1} (t) = \frac{1}{2} x(t) sin ( 4000\pi t )\)

next we apply Fourier transform

attached below is the remaining part of the solution

The average gate delay of the inverters in picosecond is 13.63.

Gate delay can be described as the length of time which begins when the input to a logic gate becomes stable and valid to change, to the time that the result of that logic gate is stable and valid to change.

From the scenario we know that

N = 91 stage

F = 403 MHz = 403 x 10⁶ Hz

To know how much the average gate delay of the inverters in picoseconds we can use the frequency formula:

F = 1/2NTd

Where Td = gate delay,

Hence,

Td = 1/2Nf

Td = 1/2(91)(403 x 10⁶) = 13.63

So, the average gate delay of the inverters in picosecond is 13.63

Learn more about gate delay at https://brainly.com/question/24228768

#SPJ4

Answer:

What are you talking about? pls explain and then maybe I can help.

Answer:

The final velocity of the rocket is 450 m/s.

Explanation:

Given;

initial velocity of the rocket, u = 0

constant upward acceleration of the rocket, a = 18 m/s²

time of motion of the rocket, t = 25 s

The final velocity of the rocket is calculated with the following kinematic equation;

v = u + at

where;

v is the final velocity of the rocket after 25 s

Substitute the given values in the equation above;

v = 0 + 18 x 25

v = 450 m/s

Therefore, the final velocity of the rocket is 450 m/s.

False. In general, the mechanical stresses on bones that result from exercise tend to strengthen them and reduce the risk of fractures. Exercise stimulates bone remodeling and increases bone density, making them more resilient to fractures.

In general, exercise actually helps to strengthen bones and reduce the risk of fractures. Physical activity puts stress on bones, which in turn stimulates the body to produce more bone tissue, resulting in stronger bones. This is known as the "osteogenic effect" of exercise.While it is true that excessive mechanical stress or trauma can lead to bone fractures, regular exercise within safe and appropriate levels can have a positive impact on bone health. Additionally, other factors such as nutrition, genetics, and medical conditions can also affect bone health.

To learn more about bones click the link below:

brainly.com/question/1457956

#SPJ11

Answer:

Step One: Know What Your Rocket Needs to Do. ...

Step Two: Establish Mission Parameters. ...

Step Three: Call in Experts. ...

Step Four: Start Drawing. ...

Step Five: Whittle Down the Possibilities. ...

Step Six: Pick the Best Design.

Explanation:

Hope this helps and thx for tha fwee pts

Answer: answer is B

Explanation:

Answer: metamorphic rock

Explanation:

Answer:

Option 1

Explanation:

As the team has already submitted the plans for the part drawing, the best way to proceed would be how it was given in the plans. Hence, the option to be selected :

Answer:

The first option

Explanation:

Team member 1 suggests an orthographic top view because that is how the plans for the part were submitted.

If the diameter of the bar is 0.490 at this load, determine I. the engineering stress and strain, and [2] II. the true stress and strain is 1561. 84 MPa.

Strain is a unitless degree of ways a great deal an item receives larger or smaller from an implemented load. Normal stress happens while the elongation of an item is in reaction to an everyday pressure (i.e. perpendicular to a surface), and is denoted via way of means of the Greek letter epsilon.

Read more about the diameter :

https://brainly.com/question/358744

#SPJ1

Answer:

gdyc ddxtfvytg4dgtfxdwcftcd3rcby

If the crankshaft end play is out of specifications, check for:

Thrust Bearings

Main Bearings

Crankshaft

Crankshaft Thrust Washers

Engine Block

To understand the crankshaft when it is out of specifications, check for:

Thrust Bearings: Check the condition of the thrust bearings, which are located at the front and/or rear of the engine block. Excessive wear or damage to the thrust bearings can contribute to increased crankshaft end play.

Main Bearings: Inspect the main bearings, which support the crankshaft within the engine block. Worn or damaged main bearings can cause excessive movement of the crankshaft.

Crankshaft: Check the crankshaft itself for any signs of damage, such as scoring or bending. A damaged crankshaft may not sit properly within the bearings, leading to increased end play.

Crankshaft Thrust Washers: Some engines use thrust washers to control the end play of the crankshaft. Inspect these washers for wear, damage, or improper installation.

Engine Block: Check the engine block for any signs of damage or distortion that may affect the alignment and support of the crankshaft.

To learn more about Crankshaft, refer:

https://brainly.com/question/31841425

#SPJ4

The algorithm for creating a cubic spline approximation in C involves creating arrays xi and yi, determining the nth data point, and creating n-dimensional arrays hi, alpha, l, mu, and z.

Calculating hi involves subtracting consecutive xi values.

Alpha[0] is set to 0 and calculated as alpha[i] = (3/hi[i]) * (yi[i+1] - yi[i]) - (3/hi[i-1]) * (yi[i] - yi[i]).

Calculating l, mu, and z is done using formulas.

Creating n-dimensional arrays c, b, and d is done by setting c[n] to 0 and iterating from n-1 to 0 to find c[i].

Using formulas, b[i] and d[i] are calculated. An evaluateSpline function is defined to evaluate the spline and return the corresponding y value.

The function is then used to plot the cubic spline over the interval x [0, 3] using the calculated arrays.

Read more about algorithms here:

https://brainly.com/question/13902805

#SPJ4

how am I going to do this, I have a friend that might be able to help I will check

Answer:

If a tube having oval cross section is subjected to pressure its cross section tends to change from oval to circular.

Bourdon tube gauges consist of a circular tube.

One end of the tube is fixed while the other end is free to undergo elastic deformation under the effect of pressure.

Fixed end is open and pressure which is to be measured is applied at the fixed end.

Free end is closed and undergoes deformation under the effect of pressure.

Due to applied pressure the circular tube tends to uncoil and become straight along the dotted line.

Working of Bourdon Gauge

As the pressure is applied at the fixed end free end undergoes deformation.

The free end is attached with sector which further meshes with the pinion on which pointer is mounted.

Deformation of the pointer is transferred to pointer via this mechanism.

As a result point undergoes deflection and shows the pressure reading on calibrated dial.

PLEASE MARK ME AS A BRAINLIST

Answer:

oooo

Explanation:

oooiiiiijjjii niaje

The stress in the built-in circular plate can be determined using the formula:Stress = Po / (2 * pi * a^2), where Po is the uniformly distributed loading and a is the radius of the plate.The deflection of the built-in circular plate can be determined using the formula:Deflection = (Po * a^4) / (64 * E * (1 - v^2)).

where E is the modulus of elasticity and v is the Poisson's ratio.The stress formula calculates the stress on the plate by dividing the uniformly distributed loading by the area of the plate. This provides the average stress acting on the plate.The deflection formula calculates the deflection of the plate under the uniformly distributed loading. It takes into account the loading, the dimensions of the plate, and the material properties (modulus of elasticity and Poisson's ratio). The deflection represents the displacement of the plate from its original position due to the applied loading.By using these formulas, the stress and deflection of the built-in circular plate can be determined based on the given parameters.

To know more about radius click the link below:

brainly.com/question/31256539

#SPJ11

The hοrizοntal band saw, vertical cοntοur band saw, and vertical band saw are the three different types οf band saw machines.

A thin, flexible, cοntinuοus steel strip with cutting teeth οn οne edge is used in hοrizοntal band saws. Metal stοck, such as angle irοn and οther rοund and flat material, is usually cut using hοrizοntal band saws. οn twο pulleys, the blade travels hοrizοntally thrοugh twο different guides.

Vertical band saws use a thin, "ribbοn-like" metal lοοp with dοwnward-facing teeth tο cut materials. In cοntrast tο cοnventiοnal fixed shοp saws, vertical band saws can perfοrm three different types οf cuts: • Crοss cuts οr “cutοffs”- cuts made perpendicular tο.

To know more about band saw visit:-

https://brainly.com/question/12260537

#SPJ1

Complete Question:

The three types of band saw machines are the horizontal band saw, the vertical contour band saw, and the ___________?

The elastic properties of the brass specimen enables it to return to its

original length when stressed below the yield strength.

The correct responses are;

4. a. The final length is 90.0 m.

b. The final length is 97.2 mm.

Reasons:  

a. Diameter of the brass alloy = 7.5 mm

Length of the specimen = 90.0 mm

Force applied = 6000 N

The equation for the applied stress, σ, is presented as follows;

\(\sigma = \dfrac{Force \ applied}{Area \ of \ specimen} = \dfrac{6000 \, N}{\pi \cdot \left(\dfrac{7.5 \times 10^{-3}}{2} \, m} \right)^2 } \approx 135.81 \ \mathrm{MPA}\)

Depending on the cold working condition, 135.81 MPa is below the yield

strength, and the brass will return to its original condition when the force is

removed. The final length is remains as 90.0 m.

b. When the applied force is F = 16,500 N, we have;

\(\sigma = \dfrac{16,500\, N}{\pi \cdot \left(\dfrac{7.5 \times 10^{-3}}{2} \, m} \right)^2 } \approx 373.48\ \mathrm{MPA}\)

The stress found for the force of 16,500 N is above the yield stress of

brass, and it is therefore, in the plastic region.

From the stress strain curve, the strain can be estimated by drawing a line

from the point of the 373.48 MP on the stress strain curve, parallel to the

elastic region to intersect the strain axis, which gives a value of strain

approximately, ε = 0.08.

The length of the specimen is given by the formula; \(l_i = l_0 \cdot (1 + \epsilon)\)

Therefore;

\(l_i\) = 90 × (1 + 0.08) = 97.2

The final length of the specimen, \(l_i\) = 97.2 mm

Learn more here:

https://brainly.com/question/13259307

Answer: d consequences

Explanation:

Answer:

2/4

7/2

92/1

83/1

9/1

93/0

Explanation:

R

K

K

R

K

R

I don't really know the answer

Answer:

He could put up advertisements all over the town and pay a few websites or search engines to have his company and ads be more common. He should also use some designs and make his company's sign very adequate.

The source for mechanical motion supplied to a generator is referred to as the prime mover.

A generator is a device that converts mechanical energy into electrical energy. The mechanical energy is typically supplied by a prime mover, which is any device that can supply the necessary rotational force to turn the generator's rotor. The prime mover can be powered by various sources of energy, such as fossil fuels, nuclear energy, hydroelectric power, wind power, or solar power.

The type of prime mover used depends on the specific application and available resources. For example, in a traditional power plant, the prime mover is typically a steam turbine that is powered by burning fossil fuels or nuclear reactions. In a hydroelectric power plant, the prime mover is the water that drives the turbine. In a wind turbine, the prime mover is the kinetic energy of the wind that turns the rotor blades.

Regardless of the type of prime mover used, the goal is to provide the necessary mechanical motion to turn the generator's rotor. The rotor is surrounded by a stator, which contains a series of electromagnets that produce a magnetic field. As the rotor turns, it generates an electrical current in the stator coils through the process of electromagnetic induction. This current is then transmitted through power lines to homes, businesses, and other electrical loads.

In summary, the prime mover is the source of mechanical motion that is supplied to a generator to produce electrical energy. The type of prime mover used depends on the specific application and available resources.

To learn more about mechanical energy, click here: brainly.com/question/19381962

#SPJ11

Sodium hydroxide, NaOH, is a very useful compound in the chemical industry. Sodium hydroxide is used to make soap, detergent, paper, and many other products. It is also used to clean drains, dissolve grease, and other materials.

For commercial convenience, one form of sodium hydroxide that is sold commercially is the saturated solution. This solution is M, which is approximately by mass sodium hydroxide.

To prepare L of M solution, we must first find the number of moles of NaOH that will be required.

Then we will find the volume of the saturated solution that is required to make this solution.
To find the number of moles of NaOH that will be required, we will use the formula:

\(N = C x V\)Where, N = number of moles of NaOH, C = concentration of the solution, and V = volume of the solution.

In this case, C = M, which is the concentration of the solution that we want to make. And V = L, which is the volume of the solution that we want to make.

So,

\(N = M x LV = N / MC = 40% = 40 / 100 = 0.4 M\)

Volume of the saturated solution required to prepare the M solution:

\(V = N / MV = 4.69 L\)

We will require approximately \(4.69 L\)of the saturated solution to prepare L of M solution.

To know more about Sodium hydroxide visit:-

https://brainly.com/question/10073865

#SPJ11

Answer:

Hermetic compressors are ideal for small refrigeration systems, where continuous maintenance cannot be ensured.

The answer choices that have been shown by research to be generally not as effective a method for studying and the methods that are more likely to produce illusions of competence in learning are:

This refers to the act or process of reading material in order to gain new knowledge about a topic and to retain the information in long-term memory.

Hence, we can see that from the complete text, there are different options given and the results of research that showed that they are not very effective for studying and they are:

Read more about studying here:

https://brainly.com/question/1077241

#SPJ1

Answer:

D. Field theory.

Answer: True

Explanation:

Structural engineering is simply referred to as a branch of civil engineering, and they help in the designing of structures like buildings, dams, tunnels, bridges, tunnels, etc. Structural engineers typically work as consultants.

Wireless sensor networks are used by structural engineers to monitor the condition of dams and bridges. Wireless sensor network refers are dedicated sensors that are used in monitoring the physical conditions of the bridges and to know if they're still in good conditions.

Answer:

Two basic components of a buildings superstrcuture are beams and slabs. These components both safley transger the live loads, dead loads, and other loads to the substrutufe. This further distributes it to the underlying earth

Explanation: