robocell allows you to move the robot in directions that exceed its actual working space since it is simulation software and does not have to accurately reflect reality. True or False

Answer:

55%

Explanation:

hot reservoir = 1100 K

cold reservoir = 500 K

This is a Carnot system

For a Carnot system, maximum efficicency of the system is given as

Eff = 1 - \(\frac{Tc}{Th}\)

where Tc = temperature of cold reservoir = 500K

Th = temperature of hot reservoir = 1100 K

Eff = 1 - \(\frac{500}{1100}\)

Eff = 1 - 0.45 = 0.55 or 55%

Feedback mechanisms gives a way to effectively to change behavior and it can be used to monitor Marissa's wellbeing by:

The aim of a feedback mechanism is one that is known to be forward focused as it helps to link one's current actions to your future results.

Therefore Feedback mechanisms gives a way to rightly to alter behavior and it can be used to monitor Marissa's wellbeing though asking her consistently how she feels, how she is  and getting her settled and one can be able to find what is wrong with her and address it.

See full question below

Due to a change in ownership and management of your facility, there has been a high turnover of managers in the past six months. Staff are very confused as to what to do, what is required and who to report to causing a lot of stress and issues in the workplace. The new management put into place a change management initiative to clarify business objectives and work roles. After a few weeks, things started to settle down and staff are performing better.

Beth, a support worker approached you one day and said that Marissa, a colleague has been having emotional breakdowns lately at work, crying unexpectedly, unable to concentrate on her tasks and taking longer breaks than usual. Beth needs to repeat instructions several times before Marissa can understand a task. Her actions are disrupting other staff and Beth is concerned about any accidents with client care due to Marissa's lack of concentration.

You invite Marissa for an informal meeting to find out how she's coping. Before the meeting, you checked Marissa's HR file and discovered that she is from the Philippines and English is her second language. She's a very hard worker and clients have commended her for her caring and sensitive nature.

In the meeting with Marissa, she nervously disclosed to you that she is worried about losing her job due to all the changes in management. She cannot afford to lose her job as she is a single parent responsible for her three children. She is also having a hard time coping with different instructions and expectations from different managers and she doesn't know who she can talk to anymore.

Question 1

Describe how you will a use a feedback mechanism to monitor Marissa's wellbeing and ensure that support measures are working.

Learn more about feedback mechanism from

https://brainly.com/question/8726791

#SPJ1

Answer:

When two fair dice are rolled, 6×6=36 observations are obtained.

P(X=2)=P(1,1)=

36

1

​

P(X=3)=P(1,2)+P(2,1)=

36

2

​

=

18

1

​

P(X=4)=P(1,3)+P(2,2)+P(3,1)=

36

3

​

=

12

1

​

P(X=5)=P(1,4)+P(2,3)+P(3,2)+P(4,1)=

36

4

​

=

9

1

​

P(X=6)=P(1,5)+P(2,4)+P(3,3)+P(4,2)+P(5,1)=

36

5

​

P(X=7)=P(1,6)+P(2,5)+P(3,4)+P(4,3)+P(5,2)+P(6,1)=

36

6

​

=

6

1

​

P(X=8)=P(2,6)+P(3,5)+P(4,4)+P(5,3)+P(6,2)=

36

5

​

P(X=9)=P(3,6)+P(4,5)+P(5,4)+P(6,3)=

36

4

​

=

9

1

​

P(X=10)=P(4,6)+P(5,5)+P(6,4)=

36

3

​

=

12

1

​

P(X=11)=P(5,6)+P(6,5)=

36

2

​

=

18

1

​

P(X=12)=P(6,6)=

36

1

​

Therefore, the required probability distribution is as follows.

Then, E(X)=∑X

i

​

⋅P(X

i

​

)

=2×

36

1

​

+3×

18

1

​

+4×

12

1

​

+5×

9

1

​

+6×

36

5

​

+7×

6

1

​

+8×

36

5

​

+9×

9

1

​

+10×

12

1

​

+11×

18

1

​

+12×

36

1

​

=

18

1

​

+

6

1

​

+

3

1

​

+

9

5

​

+

6

5

​

+

6

7

​

+

9

10

​

+1+

6

5

​

+

18

11

​

+

3

1

​

=7

E(X

2

)=∑X

i

2

​

⋅P(X

i

​

)

=4×

36

1

​

+9×

18

1

​

+16×

12

1

​

+25×

9

1

​

+36×

36

5

​

+49×

6

1

​

+64×

36

5

​

+81×

9

1

​

+100×

12

1

​

+121×

18

1

​

+144×

36

1

​

=

9

1

​

+

2

1

​

+

3

4

​

+

9

25

​

+5+

6

49

​

+

9

80

​

+9+

3

25

​

+

18

121

​

+4

=

18

987

​

=

6

329

​

=54.833

Then, Var(X)=E(X

2

)−[E(X)]

2

=54.833−(7)

2

=54.833−49

=5.833

∴ Standard deviation =

Var(X)

​

=

5.833

​

=2.415

Answer:true

Explanation:

Based on the use of the moral principle of Immanuel Kant and deontology, the way that the mother lie in court for the sake of love is one that is not morally justified or right.

Kant's moral philosophy is said to be one that capitalizes on the principle of universalizability, and it is one that states that we as humans need to only act based to principles that we can overtime will to be universal laws.

In conclusion, I can say that the action of the mother when she lie in court for the sake of love is very wrong and morally justified or right when viewed in Kant's moral philosophy or deontology.

Learn more about claims from

https://brainly.com/question/2748145

#SPJ1

According to the question of chemical , both Tech A and Tech B are correct.

What is chemical?
Chemistry is a branch of science that studies the composition, structure, and properties of matter, as well as the changes it undergoes during chemical reactions. It is the study of the composition, structure, and properties of matter, and the changes it undergoes during chemical reactions. It involves the study of the interactions between atoms and molecules, and the energy changes that accompany these interactions. Chemistry is a foundational science, as it is necessary to understand the properties and behavior of matter in order to understand the behavior of the elements, molecules, and compounds that make up the world.

Dust masks should be used when painting, and a respirator should be used when the threshold limit value (TLV) for a chemical is exceeded.

To learn more about chemical
https://brainly.com/question/30134631

#SPJ4

When you are a novice driver practicing right or left turns in typical traffic, you shouldn't travel faster than 5 to 15 mph.

Start from the right lane if you are making a right turn. If you are turning onto a highway with more than one lane traveling in the direction you want to go, enter the lane that is the closest to where you want to go.

Even if approaching traffic is turning left into the same road as you when you make a right turn from a main road into a minor road, you still need to yield to them.

To know more about novice driver visit:-

https://brainly.com/question/28237872

#SPJ4

Answer:

The Dependent Variable is the Effect, Its value depends on changes from the Independent Variable

Hope this Helps

Z≤ -4.852 ft, Maximum efficiency is η≅ 0.88 ≅ 88% is the maximum discharge possible

Solution

Given Data:-

D = 14.62in, N = 2134 rc/min, T=20°C. At T= 20°C ɣ=ρg= 62.35 lb/ft³, vapor pressure. Pv = 49.2 lb/ft².

The efficienies at each flow rate is computal by using formula

η = ρgθH / (550) (bhp)

→ As we can See the maximum efficiency point is at θ = 6ft³/s (close to 6ft³/s)

Maximum efficiency is η≅ 0.88 ≅ 88%

b) Given NPSHR = 16 ft,hg=22ft. Zactual. = 9ft  (below the sea surface)

To avoid cavitation NPSH < Pa - Pv/ρg - Z - hf

Z < Pa - Pv/ρg - hf

Z < 2116 - 49.2/62.35 - 16 - 22 [1 atm = 2116 lb/ft2]

Z≤ -4.852 ft

-> Keeping the pump 9 ft below the surface gives 4.148 ft of marign against cavitation.

Hence it is Sufficient to avoid cavitation.

Learn more about Efficiency here:

https://brainly.com/question/13764250

#SPJ4

For all of the following options d, optional standby systems, as classified by the AHJ, would typically be required.

What kind of backup mechanism is available? systems created to supply electricity to public or private buildings or other objects when the system's operation is not essential for life safety. These systems are made to deliver locally generated or stored power to specified loads automatically or manually. What are the three different kinds of backup power systems? According to NFPA 70: National Electrical Code, there are three types of emergency and standby power systems: emergency power, legally required backup power, and voluntary standby power (NEC). Passive Optical Network is a PON. PON, which is based on fiber-optic telecommunications technology, is used to provide individualized end users with broadband network access. It enables a service provider to maintain an effective broadband connection for numerous end users via a single fiber (homes and small businesses).

Learn more about Backup power systems here:

https://brainly.com/question/29972846

#SPJ4

The carriage handwheel is used to manually position and/or hand feed the carriage in the longitudinal or Z axis.

IamSugarBee

Answer:

A the value of dd because you can see how the value is to the dd

The purpose of the fast Fourier transform is it takes the signal from the position domain and represents it in the frequency domain instead, and it allows you to plot the velocity. The correct options are c and d.

FFT stands for "Fast Fourier Transform," which is an important measurement method. In the process, it dissects a signal into its individual spectral components and provides frequency information about the signal.

The output of the FFT is a complex vector that includes information about the signal's frequency content. The magnitude reflects the relative strength of the frequency components in comparison to other components.

Therefore, the correct options are c and d.

To learn more about fast Fourier transform, refer to the link:

https://brainly.com/question/20740865

#SPJ1

First, because a current greater than its capacity is being flowed through, the fuse burns out repeatedly. Now,. I and R have an inverse relationship (current).  The fuse wire's length and current rating are independent. Fuse wire is capable of carrying electricity over any distance, but thickness—which regulates melting—is crucial.

To learn more about Fuse wire refer to:

https://brainly.com/question/15409880

#SPJ1

Answer:

about half a pound i think

Explanation:

A convolutional layer is a key building block in convolutional neural networks used in image recognition and computer vision. It applies a convolution operation to input data, typically an image, to extract features and create a feature map.

To calculate the total number of parameters in the convolutional layer, we need to know the number of filters, filter size, and the number of input channels. In this case, assuming there are 64 filters of size 3x3 and the input has 3 channels, the total number of parameters in the convolutional layer is 64 x 3 x 3 x 3 + 64 (bias) = 1,792.

For the fully connected (FC) layer, we need to know the number of input and output nodes. Assuming there are 10 output nodes and the previous layer has 512 nodes, the total number of parameters in the FC layer is 512 x 10 + 10 (bias) = 5,130.

To calculate the total number of parameters in the entire network, we just need to add the parameters of the convolutional and FC layers together. Therefore, the total number of parameters in the entire network is 1,792 + 5,130 = 6,922.

In conclusion, the total number of parameters in the convolutional layer is 1,792, the total number of parameters in the FC layer is 5,130, and the total number of parameters in the entire network is 6,922.

To know more about convolutional layer visit:

https://brainly.com/question/31168689

#SPJ11

Answer:

false

Explanation:

burning a substance is not recycling it

Since the armature is wave wound, the magnetic flux per pole is 0.0274 Weber.

Given the following data:

To find the magnetic flux per pole:

Mathematically, the emf generated by a DC generator is given by the formula;

\(E = \frac{\theta ZN}{60}\) × \(\frac{P}{A}\)

Where:

First of all, we would determine the total number of armature conductors:

\(Z = 144\) × \(2\) × \(3\)

Z = 864

Substituting the given parameters into the formula, we have;

\(520 = \frac{\theta (864)(660)}{60}\) × \(\frac{4}{2}\)

\(520 = \theta (864)(11)\) × \(2\)

\(520 = 19008 \theta \\\\\Theta = \frac{520}{19008}\)

Magnetic flux = 0.0274 Weber.

Therefore, the magnetic flux per pole is 0.0274 Weber.

Read more: https://brainly.com/question/15449812?referrer=searchResults

The values of h at the two internal boundaries are :

Given data :

Z₁ = Z₂ = Z₃ = 25 m

h top = 120 m

h bottom = 100 m

K₁ = 0.0001 m/s

K₂ = 0.0005 m/s

K₃ = 0.0010 m/s

we will apply the formula below since flow is perpendicular to the bedding plane

Keq = \(\frac{Z1 + Z2 + Z3 }{\frac{Z1}{K1}+\frac{Z2}{K2} + \frac{Z3}{K3} }\)  ----- ( 1 )

Insert values given above into equation 1

Therefore ; Keq = 2.307 * 10⁻⁴ m/s

Hydraulic gradient ( Ieq ) = head loss / length

                                          = ( 120 - 100 ) / 3 * 25

                                   Ieq  = 0.266

Given that the flow is perpendicular to bedding plane

q1 = q2 = q3

V₁ = V₂ = V₃ = V

K₁i₁ = K₂i₂ = K₃i₃ = Keq * ieq

Hence :

V = Keq* Ieq

   = 2.307 * 10⁻⁴ * 0.266

   = 6.15 * 10⁻⁵ m/s .

Also;

K₁i₁ =  Keq * ieq = K₂i₂ = K₃i₃

therefore :

  i₁ = 0.615

  i₂ =  0.123

  i₃ = 0.0615

Pressure at point 1 ( i.e. pressure between first two formations )

h₁ = h top - i₁L₁

   = 120 - 0.615 * 25

   = 104.625 m

Pressure at point 2 ( i.e. pressure between the 2nd and 3rd formation )

h₂ = h₁ - i₂L₂

    = 104.625 - 0.123 * 25

    = 101.55 m

Therefore we can conclude that The values of h at the two internal boundaries are :  h₁ = 104.625 m , h₂ = 101.55 m

Learn more about boundary calculations : https://brainly.com/question/1287095

Answer:

mass flow rate = 0.0534 kg/sec

velocity at exit = 29.34 m/sec

Explanation:

From the information given:

Inlet:

Temperature \(T_1 = -16^0\ C\)

Quality \(x_1 = 0.2\)

Outlet:

Temperature \(T_2 = -16^0 C\)

Quality  \(x_2 = 1\)

The following data were obtained at saturation properties of R134a at the temperature of -16° C

\(v_f= 0.7428 \times 10^{-3} \ m^3/kg \\ \\ v_g = 0.1247 \ m^3 /kg\)

\(v_1 = v_f + x_1 ( vg - ( v_f)) \\ \\ v_1 = 0.7428 \times 10^{-3} + 0.2 (0.1247 -(0.7428 \times 10^{-3})) \\ \\ v_1 = 0.0255 \ m^3/kg \\ \\ \\ v_2 = v_g = 0.1247 \ m^3/kg\)

\(m = \rho_1A_1v_1 = \rho_2A_2v_2 \\ \\ m = \dfrac{1}{0.0255} \times \dfrac{\pi}{4}\times (1.7 \times 10^{-2})^2\times 6 \\ \\ \mathbf{m = 0.0534 \ kg/sec}\)

\(\rho_1A_1v_1 = \rho_2A_2v_2 \\ \\ A_1 =A_2 \\ \\ \rho_1v_1 = \rho_2v_2 \\ \\ \implies \dfrac{1}{0.0255} \times6 = \dfrac{1}{0.1247}\times (v_2)\\ \\ \\\mathbf{\\ v_2 = 29.34 \ m/sec}\)

A. R-chart An R-chart, also known as a range chart, is used to track the variability or dispersion of a manufacturing process.

It is commonly used in statistical process control (SPC) to monitor the consistency of a process over time.

In the case of copper tubing production, an R-chart would be suitable for tracking the variability of the tubing's diameter. The chart displays the range (the difference between the largest and smallest values) of a set of samples taken from the manufacturing process. By analyzing the range values, one can assess whether the process is producing tubing with consistent diameter or if there is excessive variability.

Learn more about statistical process control here: brainly.com/question/32406711

#SPJ11

The correct option is 5. [1.292, 2.584, 3.000, 2.540].The query is [0.5, 0.5], and the key values are given as K = [[0.5, 0.5], [-0.5, 0.5], [-0.5, 0.5]].Then, the dot product of the key value and query is calculated.

The dot product of the query and the first key is calculated as: [0.5, 0.5].[0.5, 0.5] = 0.5*0.5 + 0.5*0.5 = 0.5.The dot product of the query and the second key is calculated as: [0.5, 0.5].[-0.5, 0.5] = 0.5* -0.5 + 0.5*0.5 = 0.0.The dot product of the query and the third key is calculated as: [0.5, 0.5].[-0.5, 0.5] = 0.5* -0.5 + 0.5*0.5 = 0.0.

The dot products are normalized by dividing by the square root of the dimension of the query and the key space, which is 2 in this case. Therefore, the output of the attention operation is\([0.5/√2, 0.0/√2, 0.0/√2]\), which is equal to [0.707, 0, 0].Finally, the output vector is computed by multiplying the attention vector with the values V as follows: [0.707, 0, 0].[1, 2, 3, 4] = 1.414.[0.5, 1.0, -0.5] = [0.707, 1.414, -0.707].

To know more about key visit:

https://brainly.com/question/31937643

#SPJ11

Answer:

New Zealand may use some of these solutions to prevent air pollution

Explanation:

Using public transports.

Recycle and Reuse

No to plastic bags

Reduction of forest fires and smoking

Use of fans instead of Air Conditioner

Use filters for chimneys

Avoid usage of crackers

Answer:Report writing consists of the history and facts of a project or of any kind of event. It is useful to record past history and an overall summary of decisions. Report writing helps to solve problems as a path. Writing a report will guide you in a way that will modernize details of the improvements and upcoming plans.

i mean i have no idea what ya saying but i will just say what goo gle said Second-degree burns are more serious because the damage extends beyond the top layer of skin. This type burn causes the skin to blister and become extremely red and sore. Some blisters pop open, giving the burn a wet or weeping appearance. Over time, thick, soft, scab-like tissue called fibrinous exudate may develop over the wound

The only process I can think of that would satisfy the conservation of energy principle but does not occur in nature is a perpetual motion machine.

Perpetual Motion Machine would produce work indefinitely without any external input of energy, thus violating the first law of thermodynamics which states that energy cannot be created or destroyed, only converted from one form to another.

While it is theoretically possible to design a machine that appears to produce more energy than it consumes, such a machine cannot exist in reality due to the various energy losses that occur in any real-world system.

These losses can occur due to factors such as friction, heat transfer, and resistance in electrical circuits, among others.

Learn more about conservation of energy here:

https://brainly.com/question/166559

#SPJ1

The statement wind resistance created by opening windows while driving results in a fuel penalty as great or greater than is incurred by using air conditioning is False.

Define wind resistance.

An object must overcome wind resistance when moving through the air, when the air is moving over the thing, or when doing both at once. Examples include an automobile traveling through the still air, the effect of wind on a building, or a drone flying through a headwind.

There are two parts to aerodynamic drag or wind resistance:

Pressure drag: The wind's pressure is acting all over the object. As an illustration, consider the atmospheric pressure.

Wind resistance caused by friction: Friction is created as air moves across an object's surface. This occurs as a result of the formation of a boundary layer; the air is pulled along the surface even though it is perfectly smooth.

To learn more about wind resistance, use the link given
https://brainly.com/question/14726729
#SPJ4

Answer:

Explanation:

Automotive Engineering is one of the most challenging and comprehensive fields of engineering today. The automotive sector has come a long way since the age of steam powered flat engines to the age of fast racing Formula 1 car, light and heavy commercial vehicles with lots of technological developments being done every day. “A good scientist is a person with original ideas. A good engineer is a person who makes a design that works with as few original ideas as possible”.

Engineering has been my passion from the start. I took the first step to become an engineer by securing 93.2% in SSC and 82.8% in HSC. I also secured 8259th rank among 10 lakhs students in AIEEE and 6979th rank among 4.7 lakhs in JEE in 2010 so that I could get a seat in one…show more content…

Additionally, Germany avails the advantages of securing the best of knowledge, quality of education, and above all the international exposure. The quality of German Mechanical Engineering has always been much vaunted. The research carried out on structural design of vehicles, alternative and electrified vehicle propulsion at the University is appealing. The breadth and depth of the courses coupled with a stimulating research environment seem to me the right mix for seminal work and pioneering research. I believe that with variety of courses offered and with highly knowledgeable faculty and excellent facilities, the University will provide a perfect environment to focus all my resources towards my goal.

In summary, I am fully committed to a career in automotive sector. My long term goal is to pursue my research interests in the field of automobiles and strive to emerge as an active contributor to the field in the World in general and India in particular.  Hence I am eagerly looking forward to spending the next few years in a structured Master’s program in Automotive Engineering. The Mechanical Department of RWTH Aachen has World renowned Faculty besides academically brilliant and motivated graduates in whose association my understanding of the area will be much.