Part D

Next, we'll examine magnetic force. Bring the ends of your two magnets together. Explore the three

possible combinations. In two of the combinations, the two ends are the same. In one combination, the

two ends are different. Describe the force you feel in each combination

Jonathan needs to maintain a separation of 0.543 mm between the plates to get the desired charge, and a dielectric constant of 92.6 to achieve a separation of 5 mm with a dielectric.

(a) Using the equation Q = CV, where Q is the charge, C is the capacitance, and V is the voltage, we can solve for the capacitance: C = Q/V =\((8.15 x 10^-9 C) / (50 V) = 1.63 x 10^-10 F.\)

Then, using the formula for capacitance of parallel plate capacitors: C = ε0A/d, where ε0 is the permittivity of free space, A is the area of the plates, and d is the separation distance, we can solve for the separation distance: d =\(_{3}OA/C = (8.85 x 10^-12 F/m) x (0.01 m^2) / (1.63 x 10^-10 F) = 0.543 mm.\)

(b) To find the dielectric constant, we can use the formula for capacitance of a parallel plate capacitor with a dielectric: C = εrε0A/d, where εr is the relative permittivity or dielectric constant of the material. Solving for εr, we get: εr = Cd / ε0A = \((1.63 x 10^-10 F)\) x (0.005 m) / \((8.85 x 10^-12 F/m)\) x \((0.01 m^2)\) = 92.6.

Therefore, Jonathan should use a dielectric with a relative permittivity of 92.6 to achieve a separation of 5 mm.

learn more about capacitance

brainly.com/question/13578522

#SPJ1

Answer:

Energy consumed by the electric kettle in 9.5 min =Pt=(2.5×10

3

)×(9.5×60)=14.25×10

5

J

Energy usefully consumed =msΔT=3×(4.2×10

3

)×(100−15)=10.71×10

5

where s=4.2J/g

o

C= specific heat of water and boiling point temp=100

o

C

Heat lost =14.25×10

5

−10.71×10

5

=3.54×10

5

Answer:

b. the electromagnetic spectrum

Explanation:

the electromagnetic spectrum contains all the forms of light, including gamma rays, x-rays, ultraviolet radiation, visible light, infrared, radio waves, microwaves, etc

Answer:

It is so because of momentum. i.e a body keeps trying to stay at its current position.

For the following are four electrical components:

a. For components A and B, both of which obey Ohm's law, the current-voltage characteristics would be a straight line passing through the origin. The slope of the line for component B would be steeper than that of component A, indicating higher resistance.

b. The shape of the characteristic for component C, the filament lamp, can be explained by its construction. A filament lamp consists of a filament made of a resistive material, typically tungsten, which heats up and emits light when an electric current passes through it.

c. The component chosen for D, which does not obey Ohm's law, could be a diode. A diode is a two-terminal electronic component that allows the current to flow in only one direction.

For the following are four electrical components:

a. Sketches of current-voltage characteristics:

For components A and B, both of which obey Ohm's law, the current-voltage characteristics would be a straight line passing through the origin. The slope of the line for component B would be steeper than that of component A, indicating higher resistance.

  Current (I)

     ^

     |          B

     |         /

     |        /

     |       /

     |      /

     |     /

     |    /

     |   /

     |  /

     | /

     |/

     +------------------> Voltage (V)

     Current (I)

     ^

     |          A

     |         /

     |        /

     |       /

     |      /

     |     /

     |    /

     |   /

     |  /

     | /

     |/

     +------------------> Voltage (V)

For component C, a filament lamp, the current-voltage characteristic would be a curve that is not linear. It would exhibit a non-linear increase in current with increasing voltage. At lower voltages, the lamp would have low resistance, but as the voltage increases, the resistance of the filament also increases due to the phenomenon of thermal self-regulation. This leads to a slower increase in current at higher voltages.

For component D, a component that does not obey Ohm's law, the current-voltage characteristic could be any non-linear curve depending on the specific component chosen. Examples of components that do not obey Ohm's law include diodes and transistors.

b. The shape of the characteristic for component C, the filament lamp, can be explained by its construction. A filament lamp consists of a filament made of a resistive material, typically tungsten, which heats up and emits light when an electric current passes through it. As the voltage across the filament increases, the temperature of the filament increases as well, causing its resistance to increase. This increase in resistance results in a slower increase in current with increasing voltage, leading to the characteristic non-linear curve observed.

c. The component chosen for D, which does not obey Ohm's law, could be a diode. A diode is a two-terminal electronic component that allows the current to flow in only one direction. It exhibits a non-linear current-voltage characteristic where it conducts current only when the voltage is above a certain threshold, known as the forward voltage. Below this threshold, the diode has a high resistance and blocks current flow in the reverse direction. The characteristic curve of a diode would show negligible current flow until the forward voltage is reached, after which it exhibits a rapid increase in current with a relatively constant voltage.

For more such questions on electrical components, click on:

https://brainly.com/question/28630529

#SPJ8

Answer:

Narendra Modi

Explanation:

The answer depends on what year you are talking about on, Narendra Modi was a prime minister of india since 2014. If you are missing information on your question tell me so I can try and tell you the answer,

Hope this helped,

have a good day :]

Answer:

c 250 kg-m/s

Explanation:

happy to help!!

Answer: 250 kg

Explanation:

For a rectangular storage tank filled with paraffin to a depth of 2 m, the volume, weight, mass of paraffin, and pressure at the bottom of the tank are:

a. The volume is 24 m³.

b. weight is 240,000 N,

c. mass is 24,490 kg, and

d. pressure is 23,530 Pa.

a) The volume of paraffin in the rectangular storage tank can be calculated using the formula:

Volume = Length x Width x Depth

Given:

Length = 4 m

Width = 3 m

Depth = 2 m

Substituting the values into the formula, we have:

Volume = 4 m x 3 m x 2 m

Volume = 24 m³

Therefore, the volume of paraffin in the tank is 24 cubic meters.

b) The weight of the paraffin can be calculated using the formula:

Weight = Volume x Density x Acceleration due to gravity

The density of paraffin varies, but we can assume a typical value of 10,000 kg/m³. The acceleration due to gravity is approximately 9.8 m/s². Substituting these values into the formula:

Weight = 24 m³ x 10,000 kg/m³ x 9.8 m/s²

Weight = 240,000 N

Therefore, the weight of the paraffin in the tank is 240,000 Newtons.

c) The mass of the paraffin can be calculated using the formula:

Mass = Density x Volume

Substituting the given values:

Mass = 10,000 kg/m³ x 24 m³

Mass = 24,490 kg

Therefore, the mass of the paraffin in the tank is 24,490 kilograms.

d) The pressure at the bottom of the tank due to the paraffin can be calculated using the formula:

Pressure = Weight / Area

The area of the bottom of the tank is equal to the length multiplied by the width. Substituting the values:

Area = 4 m x 3 m

Area = 12 m²

Pressure = 240,000 N / 12 m²

Pressure = 20,000 Pa

Therefore, the pressure at the bottom of the tank due to the paraffin is 20,000 Pascals (Pa).

For more such information on; volume

https://brainly.com/question/14197390

#SPJ8

Answer: Approximately 0.08333 meters per second

Explanation:

To get this answer, divide the distance over the time duration

rate = distance/time

rate = (5 meters)/(60 seconds)

rate = (5/60) meters per second

rate = 0.08333 meters per second approximately

Let me know if you need the rate in some other units such as "miles per hour" or "kilometers per hour". The units "meters per second" is often used in physics.

Answer:The Answer is economic gain

Explanation:

Answer:

Ionic charges refer to the electrical charges of ions, which are atoms or molecules that have gained or lost electrons. These charges result from the loss or gain of electrons during chemical reactions.

When an atom loses one or more electrons, it becomes a positively charged ion known as a cation. The cation carries a positive charge equal to the number of electrons lost.

Conversely, when an atom gains one or more electrons, it becomes a negatively charged ion known as an anion. The anion carries a negative charge equal to the number of electrons gained.

The magnitude of the ionic charge depends on the number of electrons gained or lost, which is determined by the element's position in the periodic table and its electron configuration. For example, sodium (Na) loses one electron to become a +1 charged cation (Na+), while chlorine (Cl) gains one electron to become a -1 charged anion (Cl-).

Answer:

c

Explanation:

The primary means by which heat is transferred through fluids is convection currents (option D).

Convection is the transmission of heat in a fluid by the circulation of currents.

Heat can be transferred by different methods depending on the medium. Fluids like gases and liquids transfer heat through the process of convection.

Therefore, the primary means by which heat is transferred through fluids is convection currents.

Learn more about convection at: https://brainly.com/question/16635311

#SPJ1

Distance = (speed) x (time)

Distance = (375 km/hr) x (2 hr)

Distance = 750 km

(That's about 233 miles per hour.  A hot-air balloon moving at that speed is in big serious trouble.  I hope there's nobody trapped in the basket.)

Answer:

Sorry but i dont know

Explanation:

Answer:

b is the ans......

Explanation:

"b" (and any subsequent words) was ignored because we limit queries to 32 words.

The velocity with which the jumper leaves the floor is 5.1 m/s.

The initial velocity of the jumper or the velocity with which the jumper leaves the floor is calculated by applying the principle of conservation of energy as shown below.

Kinetic energy of the jumper at the floor = Potential energy of the jumper at the maximum height

¹/₂mv² = mgh

v² = 2gh

v = √2gh

where;

v = √(2 x 9.8 x 1.3)

v = 5.1 m/s

Learn more about initial velocity here: https://brainly.com/question/19365526
#SPJ1

The kinetic energy of the ejected electron (photoelectron) is equal to the energy of the photon minus the work function (E required to eject the photoelectron).

The  process of final kinetic energy of the electron upon reaching the anode compare to its initial potential energy immediately after it has been ejected -

Learn more about kinetic energy

brainly.com/question/15764612

#SPJ4

The velocity of this automobile as a function of time. At t = 5 seconds, the automobile is 90 meters from its initial position.

To determine the distance traveled by the automobile from its t = 0 initial position, we need to calculate the area under the velocity-time graph up to t = 5 seconds.

The graph shows the velocity of the automobile as a function of time. Let's assume that positive velocity represents forward motion, and negative velocity represents backward motion.

Since velocity represents the rate of change of displacement, the area under the velocity-time graph represents the displacement or distance traveled. In this case, the area will consist of two parts: the area above the x-axis (forward motion) and the area below the x-axis (backward motion).

To calculate the area, we can break it down into two separate integrals:

1. The area above the x-axis (forward motion):

Since the velocity is constant at 20 m/s for the first 4 seconds, the area is a rectangle:

Area1 = velocity * time = 20 m/s * 4 s = 80 m

2. The area below the x-axis (backward motion):

The velocity changes to -10 m/s at t = 4 seconds. From t = 4 seconds to t = 5 seconds, the velocity is -10 m/s. The area is a rectangle:

Area2 = velocity * time = -10 m/s * 1 s = -10 m

To find the total distance traveled, we add the absolute values of the areas:

Total distance = |Area1| + |Area2| = |80 m| + |-10 m| = 80 m + 10 m = 90 m

For more such information on: velocity

https://brainly.com/question/80295

#SPJ8

Answer:

here's the pdf for it

IB QuestionbankExplanation:

The work done by the given force should be -45 joules

Since force acts in the negative y direction

So,

F = -15j

here the displacement vector is d = 3i+3j-1k

Now

work done is W = dot product of force and displacement

                        = [-15j ] . [ 3i+3j-1k]

                        =-45 joules

Therefore, The work done by the given force should be -45 joules

Learn more about force here:

https://brainly.com/question/93252

At pH = 8, the ratio of H+ ions to OH- ions is 1:1, indicating a neutral solution. The concentration of H+ ions and OH- ions is approximately 1 x 10^(-8) mol/L. The calculated and approximated ratios should match.

To calculate the ratio of H+ ions to OH- ions at pH = 8, we need to use the relationship between pH and the concentration of H+ ions. The pH scale is a logarithmic scale that measures the acidity or alkalinity of a solution based on the concentration of H+ ions.

The formula to calculate the concentration of H+ ions (\(C_H\)+) from pH is:

\(C_H\)+ = \(10^(^-^p^H^)\)

Substituting pH = 8 into the formula:

\(C_H\)+ = \(10^(^-^8^))\)

Using the properties of logarithms, we can calculate the concentration of H+ ions:

\(C_H\)+ ≈ 1 x \(10^(^-^8^))\) mol/L

According to the concept of neutrality in water, the concentration of H+ ions is equal to the concentration of OH- ions. Therefore, the concentration of OH- ions (\(C_O_H\)-) is also approximately 1 x \(10^(^-^8^))\)mol/L.

To calculate the ratio of H+ ions to OH- ions, we divide the concentration of H+ ions by the concentration of OH- ions:

Ratio = \(C_H\)+ / \(C_O_H\)-

Ratio = (1 x \(10^(^-^8^))\) / (1 x \(10^(^-^8^))\))

Ratio = 1:1

The ratio of H+ ions to OH- ions at pH = 8 is 1:1, indicating a neutral solution. This means that the concentration of H+ ions is equal to the concentration of OH- ions, resulting in a balanced ratio.

When comparing the calculated ratio of 1:1 to the approximated ratio at pH = 8, they should be the same because the ratio of H+ ions to OH- ions is determined solely by the pH value, which is consistent and mathematically derived. Therefore, the approximated and calculated ratios should match.

For more such information on: solution

https://brainly.com/question/29058690

#SPJ8

Explanation:

I have only 4 of them ,hope they help

Power of electric tube light = 80W=0.08kW

Time used =  8 hour 

Energy = Power x time taken =0.08×8=0.64kWh=0.64units.

The energy consumed per day = 0.64units

Answer:

Hence, a total of 0.8 electrical units of energy is consumed in one day by the bulb.

The centripetal acceleration of this ball is equal to 12 \(m/s^2\)

Given the following data:

Radius = \(\frac{Diameter}{2} = \frac{1.5}{2} = 0.75 \;meters\)

To find the centripetal acceleration of this ball:

The acceleration of an object along a circular track is referred to as centripetal acceleration.

Mathematically, the centripetal acceleration of an object is given by the formula:

\(A_c = \frac{V^2}{r}\)

Where:

V is the velocity of an object.

Substituting the given parameters into the formula, we have;

\(A_c = \frac{3^2}{0.75}\\\\A_c = \frac{9}{0.75}\\\\A_c = \frac{9}{0.75}\)

Centripetal acceleration = 12 \(m/s^2\)

Read more: https://brainly.com/question/6082363

Answer:

Explanation:

1) either all the way to the ground, or, if the cliff is high enough,

h = ½(9.8)1.4² = 9.6 m

2) If the cliff is high enough and we ignore air resistance

v = 9.8(2.7) = 26 m/s

According to the given statement  5.50 *  10¹⁴Hz is the frequency of the incident light.

The photoelectric effect, which happens when light strikes a metal, can release electrons out of its surface. As the electrons that are expelled first from metal are known as emitted electrons, this process is also sometimes referred to as photoemission.

The following equation may be used to determine a photon's energy in terms of frequency:

E = hf

The work function must first be changed from electron volts (eV) to joules (J):

1 eV = 1.602 × 10⁻¹⁹ J

Hence, the work function is:

1.68 eV × 1.602 × 10⁻¹⁹ J/eV = 2.69 × 10⁻¹⁹ J

The emitted photon's kinetic energy is:

E = 9.60 × 10⁻²⁰ J

E = E0 + KE

where KE is the kinetic energy of the released electron and E0 is the work function.

Inputting the values, we obtain:

hf = E0 + KE

hf = 2.69 × 10⁻¹⁹ J + 9.60 × 10⁻²⁰J

hf = 3.65 × 10⁻¹⁹ J

When we solve for f, we obtain:

f = E/h = (3.65 × 10⁻¹⁹ J) / (6.626 × 10⁻³⁴ J s)

f = 5.50 × 10¹⁴ Hz

As a result, the incident light has a frequency of 5.50 *  10¹⁴Hz.

To know more about photoelectric effect visit:

https://brainly.com/question/9260704

#SPJ1