It is desired that the impedance at resonance be one-fifth the impedance at 10 kHz . What value of R should be used to obtain this result

Answer:

false

Explanation:

burning a substance is not recycling it

Answer:

it should be A bc I took the test a while back

We found that the current flowing through the circuit is 1.74 amperes, the voltage drop across the resistor is 8.70 volts, and the power dissipated by the resistor is 15.14 watts.

To start, we have the circuit shown with an EMF (electromotive force) of 8.70 volts and a resistance (R) of 5.00 ohms. We need to find the following quantities: Current (I) flowing through the circuit Voltage (V) drop across the resisto Power (P) dissipated by the resistor.

To find the current (I), we can use Ohm's Law, which states that the current through a conductor between two points is directly proportional to the voltage across the two points and inversely proportional to the resistance between them. So, we have: I = V/R where V is the voltage (EMF) and R is the resistance. Plugging in the values we have, we get:
I = 8.70/5.00 = 1.74 amperes.

To know more about circuit visit:

https://brainly.com/question/32025199

#SPJ11

We have a total of 6 nodes with 5 components. We must determine the temperature at each of these six nodes. Mesh refining is the process of increasing the number of elements.

What is temperature?

Temperature is a scientific term that describes how hot or cold something is.There are three types of temperature scales: those described in terms of the average translational kinetic energy per freely moving microscopic particle in a body, such as an atom, molecule, or electron, such as the SI scale; those which rely solely on purely macroscopic properties as well as thermodynamic principles, including such Kelvin's original definition; and those that are not defined by theoretical principles, and yet are defined by convenient empirical properties of particulate matter.

To learn more about temperature

https://brainly.com/question/2339046

#SPJ13

Answer:

474.536 Joules

Explanation:

Use a converter machine.

1lb = 1.355818 j

350 = 1.355818 j *350

= 474.536

Answer:

No. of transistors = \($4.1524 \times 10^{10}$\) transistors

Explanation:

Given that:

N = \($1920 \times 10^{0.163(Y-1980)}$\)

Y = 2025

N = \($1920 \times 10^{0.163(2025-1980)}$\)

N = \($4.1524 \times 10^{10}$\) transistors

Now at Y = 1980

Number of transistors N = 1920

Therefore,

\($1000 = 10^{0.163(Y-1980)}$\)

\($\log_{10} 1000=0.163(Y-1980)$\)

\($\frac{3}{0.163}=Y-1980$\)

18 ≅ 18.4 = Y - 1980

Y = 1980 + 18

   = 1998

So, to increase multiples of 1000 transistors. it takes 18 years.

Answer:

False

Explanation:

Non-volatile memory is a category of memory that retains its data even when the system is turned off or the power is off. It is sometimes referred to as static or permanent memory. For example, hard disk. Therefore, the given statement is false.

Answer:

TRUE

Explanation:

Volatile memory is memory or storage that loses its data when the computer's power is switched off. Volatile memory is a nonpermanent memory because when the power is off it loses its contents.

Example: Random Access Memory (RAM) is an example of volatile memory.

On the other hand, nonvolatile storage does not lose its contents when the computer power is switched off

Example: Read-only memory(ROM) is one example of Non-volatile storage.

Hence the given statement is "True".

Answer:

52m/s

12 kpa

0.1 kg/m

Explanation:

make me brainless tyyy

Answer:

Anything you want to do in Hootsuite can be found in the ___ Sidebar_____, with the main workspace in the ___center______

Sidebar; center

Explanation:

The main workspace of the Hootsuite is located in the center.  The sidebar is where the core access to the Hootsuite functionality, like Streams, Inbox, Planner, Analytics, Publisher, and the App Directory, is obtained.  Hootsuite is a media management platform for curating content, scheduling posts, managing team members, and measuring performances.

When the process is in control but does not meet specification, it is referred to as a special cause error.

In statistical process control, a process is considered to be in control when it operates within the defined limits and shows only random variations. However, when a process is in control but does not meet the desired specifications, it indicates the presence of a special cause error.

Special cause errors are attributed to specific factors or events that cause the process to deviate from the expected outcome. These errors are typically unpredictable and require investigation and corrective action to bring the process back within the desired specifications.

Read more about control error

brainly.com/question/16230467

#SPJ1

Answer:

help me why are you an enginer

Explanation:

because lives

Answer: It does make sense, because I've been involved in these careers and have a long family line of them. And other questions?

Explanation:

Answer:

\(-6111.11\ \text{kJ}\)

\(863.28\ \text{kJ}\)

Explanation:

m = Mass of automobile = 1100 kg

v = Velocity of car = 120 km/h = \(\dfrac{120}{3.6}\ \text{m/s}\)

h = Height of hill = 80 m

g = Acceleration due to gravity = \(9.81\ \text{m/s}^2\)

Change in kinetic energy

\(KE=\dfrac{1}{2}m(u^2-v^2)\\\Rightarrow KE=\dfrac{1}{2}\times 1100\times (0-(\dfrac{120}{3.6})^2)\\\Rightarrow KE=-611111.11\ \text{J}\)

Change in kinetic energy is \(-6111.11\ \text{kJ}\)

Change in potential energy is given by

\(PE=mgh\\\Rightarrow PE=1100\times 9.81\times 80\\\Rightarrow PE=863280\ \text{J}\)

The change in potential energy is \(863.28\ \text{kJ}\).

Answer:

Explanation:

Step one:

given data

T_{wi} = 20^{\circ}C

T_{Ai}=1000K

T_{Ae}= 400kPa

P_{Wi}=200kPa

P_{Ai}=125kPa

P_{We}=200kPa

P_{Ae}=100kPa

m_A=2kg/s

m_W=0.5kg/s

We know that the energy equation is

\(m_Ah_{Ai}+m_Wh_W=m_Ah_{Ae}+m_Wh_{We}\)

making \(h_{We}\) the subject of formula we have

\(h_{We}=h_{Wi}+\frac{m_A}{mW}(h_A-h_{Ae})\)

from the saturated water table B.1.1 , corresponding to  \(T_{wi}= 20c\)

\(h_{Wi}=83.94kJ/kg\)

from the ideal gas properties of air table B.7.1 , corresponding to T=1000K

the enthalpy is:

\(h_{Ai}=1046.22kJ/kg\)

from the ideal gas properties of air table B.7.1 corresponding to T=400K

\(h_{Ae}=401.30kJ/kg\)

Step two:

substituting into the equation we have

\(h_{We}=h_{Wi}+\frac{m_A}{mW}(h_A-h_{Ae})\)

\(h_{We}=83.94+\frac{2}{0.5}(2046.22-401.30)\\\\h_{We}=2663.62kJ/kg\)

from saturated water table B.1.2 at \(P_{We}=200kPa\)  we can obtain the specific enthalpy:

\(h_g=2706.63kJ/kg\)

we can see that \(h_g>h_{Wi}\), hence there are two phases

from saturated water table B.1.2 at \(P_{We}=200kPa\)

\(T_{We}=120 ^{\circ} C\)

This word rhebajbje is not a word according to me and the internet if you search "Define rhebajbje".

Profit-Centric Design Professionals can be developed by training and educating people on design principles, business strategies, and user research in order to create profitable solutions.

A profit center is a branch or division of a company that directly contributes to the bottom-line profitability of the corporation. A profit center is treated as a separate business, with revenues recorded separately.

Developing Profit Centric Design Professionals entails design, business, and user research training in order to create profitable solutions for clients.

Learn more about Professionals:
https://brainly.com/question/3396195
#SPJ1

Local codes can impact blowdown water by specifying the allowable concentration of impurities and discharge standards, which can affect the treatment and disposal of blowdown water.

Local codes and regulations play an important role in determining the quality of water that can be discharged into the environment. Blowdown water, which is generated from cooling systems, can contain high levels of impurities such as dissolved solids, minerals, and organic matter.

Local codes can specify the maximum allowable concentration of these impurities, which can impact the treatment and disposal of blowdown water. For example, some codes may require blowdown water to be treated before being discharged into the environment, while others may require it to be hauled off-site for disposal.

It is important for businesses to be aware of these regulations and ensure compliance to avoid potential penalties or environmental harm.

For more questions like Water click the link below:

https://brainly.com/question/1992092

#SPJ11

Answer:

0.02795 m

Explanation:

Neglecting shaft weight Design the shaft using maximum shear stress theory and determine the required diameter

factor of safety = 1.5

length of shaft = 10 meters

material yield strength = 350 MPa

Torque = 500 N.m

The required shaft diameter = 0.02795 m

attached below is a detailed solution of the problem

The deformation at the point of B is 1.09 mm

Deformation refers to the change in shape or size of a material due to the application of external forces or stress. It is a common phenomenon in materials science and engineering, and it plays an important role in the behavior and performance of materials under various conditions.

E = 70 Gpa

P = 90 KN

For every section

A and B

125 - 90

= 35

For B and C

75 + 50 = 125

For C and D

50

we have

\(\frac{35*10^3*1.75}{800*10^6*70*10^9}\)

= \(\frac{61250}{800000000 * 5.6*10^1^9}\)

= 1.09 mm

Read more on deformation here: https://brainly.com/question/29830237

#SPJ1

To determine the magnitude of the resultant force acting on the pin, the following steps should be followed as the magnitude of the resultant force is the vector sum of all the individual forces acting on the object or the system.

1. Draw a vector diagram of the forces acting on the object or system, with each force represented by an arrow. The length of each arrow should be proportional to the magnitude of the force, and the direction of each arrow should indicate the direction of the force.
2. Identify all the individual forces acting on the pin.
3. Break down each force into its horizontal and vertical components (if necessary).
4. Sum up all the horizontal components to find the total horizontal force.
5. Sum up all the vertical components to find the total vertical force.
6. Use the Pythagorean theorem to find the magnitude of the resultant force: Resultant force = √(total horizontal force² + total vertical force²).

7. If we have two or three forces acting on an object or system, we can use vector addition to determine the magnitude and direction of the resultant force.

Learn more about Resultant Force at:

https://brainly.com/question/25239010

#SPJ11

Answer:

Halon 1211 or equivalent fire extinguishers are spaced throughout the cabin and easily accessible from the aisle or entryway. A water fire extinguisher is typically located near a lavatory-galley complex. In some cases, one or more Halon 1211 extinguishers are used in place of the water fire extinguisher.

After gaining access to the user's account, the attacker can steal any sensitive information they desire or perform any action that the user is authorized to perform.

In 2017, the Open Web Application Security Project (OWASP) created a list of the Top 10 Application Security Risks. The list is as follows:

InjectionBroken Authentication and Session ManagementSensitive Data ExposureXML External Entities (XXE)Broken Access ControlSecurity MisconfigurationCross-Site Scripting (XSS)Insecure DeserializationUsing Components with Known VulnerabilitiesInsufficient Logging and MonitoringNow, the given alternatives include:

a) Cross Site Request Forgery

b) Cross Site Scripting

c) Injectiond)

Broken AuthenticationFrom the above alternatives, we can say that all of the options are part of OWASP Top 10, except Cross Site Request Forgery.

Therefore, the correct answer is (a) Cross Site Request Forgery.

To know more about user's account visit:

https://brainly.com/question/29744824

#SPJ11

Answer:

D. To interpret the possible meaning of the data

Answer:

Both Technician A and B are correct.

Explanation: A brake lathe is a special tool used to improve or work on the surface of brake pads it helps to smoothen the surface.

Brake lathe has been found to be very effective in removing rusts in rotors and unevenness in the brake pad surfaces in order to ensure the efficiency and effectiveness of the brake system of a vehicle. Hence, a brake lathe helps to make brake rotor surface as smooth as possible.

An nmos and gate can be implemented using 2 nmos transistors in series, or the output of 2 nmos transistors in parallel connected to the input of a single nmos transistor.

In the first implementation, the two nmos transistors are connected in series, with the input signal connected to the gate of the first transistor and the output taken from the drain of the second transistor. When the input signal is high, the first transistor is turned on, allowing current to flow to the second transistor. If the second transistor is also turned on, the output will be low, otherwise, the output will be high.

In the second implementation, the two nmos transistors are connected in parallel, with their sources and gates connected together, and the output taken from the drains. When the input signal is high, both transistors are turned on, allowing current to flow to the output. If either of the transistors is turned off, the output will be low.

Both of these implementations use two nmos transistors, but they are connected differently to achieve the desired logic function. A single nmos transistor can be used to implement a NOT gate or an inverter, but it cannot implement an AND gate

To know more about transistors, visit:https://brainly.com/question/29731975

#SPJ4

Answer: a heathen

Explanation:

The term for a person who does not share the belief of the dominant religion of a society is "a heathen". The correct option is A.

A society is a group of people who interact with one another on a regular basis, or a large social group that shares the same spatial or social territory and is typically subject to the same political authority and dominant cultural expectations.

"A heathen" is a person who does not share the beliefs of a society's dominant religion.

The term is frequently used to describe someone who is considered uncivilized or primitive because of their religious beliefs, especially in societies where the dominant religion wields significant power and influence.

However, it is important to note that the term can be considered derogatory and offensive, and it is generally more respectful to refer to people of different religious beliefs using neutral or positive terms.

Thus, the correct option is A.

For more details regarding society, visit:

https://brainly.com/question/12006768

#SPJ7

During  propagation step of a free-radical chain-growth polymerization does the polymer actually grow or chain extend.

What is radical chain-growth polymerization?

What distinguishes step growth polymerization from chain growth polymerization?

Learn more about radical chain-growth polymerization

brainly.com/question/1033191

#SPJ4

Answer:

what sign?

Explanation:

Answer: dude put the sign up

Explanation:

It is to be noted that all UHRS platforms are optimized for the popular kinds of internet browser applications.

The Universal Human Relevance System (UHRS) is a crowdsourcing platform that allows for data labeling for a variety of AI application situations.

Vendor partners link people referred to as "judges" to offer data labeling at scale for us. All UHRS judges are bound by an NDA, ensuring that data is kept protected.

A browser is a software tool that allows you to see and interact with all of the knowledgeon the World Wide Web. Web sites, movies, and photos are all examples of this.

Learn more about internet browser applications.:
https://brainly.com/question/16829947
#SPJ1