In a modern industrial plant the most likely polyphase power system in use is a/an blank system

Answer: total heat dissipated from the array is 0.60 Watt

Explanation:

No. of fins 8

Given that:

Wdth (b) = 3 mm = 0.003 m

thickness (t) = 0.4 mm = 0.0004 m

length (L) = 40 mm

combined convection and radiation heat transfer coefficient to be = 8.0 W/m² K.

Tb = 340 K, Tw = 300 K

First we compute for area of  fins A = 0.003 m × 0.00004 = 1.2 × 10⁻⁶ m²

Perimeter of Fin P = 2( 0.003 m + 0.00004 m ) = 0.0068 = 6.8 × 10⁻³  

for 2024 T6 aluminium alloy K = 151 W/m-k from table

Now

m = √ ( hp/ka) = √[( 8 × 6.8 × 10⁻³  ) / (151 × 1.2 × 10⁻⁶ m²)] = 17.327

Lc = L + t/2 = 40 + 0.4/2 = 40.2 mm = 40.2 × 10⁻³

Now heat transfer from on fin :

Q = √( hpKA) × (Tb-Tw) × Tanh(mLc)

= √( 8×6.8 × 10⁻³×151×1.2 × 10⁻⁶) × (340-300) × tanh (0.6965)

= 3.13963 × 40 × 0.602144

= 0.075620 Watt

So total heat dissipated from array of 8 fins = 8 ×0.075620 = 0.60 Watt

The magnitude and direction of the resultant of the given forces using Cartesian vector notation method are R = 942.6N at 246.9°.

To solve this problem using Cartesian vector notation method, we need to find the x- and y-components of each force, add up the components separately, and then find the magnitude and direction of the resultant vector.

First, let's find the x- and y-components of each force:

F1 = 800N at 45°

Fx1 = F1 * cos(45°) = 800N * cos(45°) = 565.7N

Fy1 = F1 * sin(45°) = 800N * sin(45°) = 565.7N

F2 = 600N at 30°

Fx2 = F2 * cos(30°) = 600N * cos(30°) = 519.6N

Fy2 = F2 * sin(30°) = 600N * sin(30°) = 300N

F3 = 700N at 180° (horizontal direction)

Fx3 = F3 = -700N

Fy3 = 0N

Next, let's add up the x- and y-components of the three forces:

Rx = Fx1 + Fx2 + Fx3 = 565.7N + 519.6N - 700N = 385.3N

Ry = Fy1 + Fy2 + Fy3 = 565.7N + 300N + 0N = 865.7N

The magnitude of the resultant vector R is:

|R| = sqrt(Rx^2 + Ry^2) = sqrt(385.3N^2 + 865.7N^2) = 942.6N

The direction of the resultant vector R is:

theta = arctan(Ry/Rx) = arctan(865.7N/385.3N) = 66.9°

However, we need to adjust the angle by adding 180° because the vector points into the third quadrant:

theta = 66.9° + 180° = 246.9°

Therefore, the magnitude and direction of the resultant of the given forces using Cartesian vector notation method are R = 942.6N at 246.9°.

Learn more about magnitude  at:

https://brainly.com/question/15681399

#SPJ1

To implement a queue class using a singly linked list with no header or tail nodes, certain steps should be followed. Firstly, the list should be initialized, and for a singly linked list, only one variable is needed, which is the first node pointer or the head.

Next, a new node should be set at the tail, and the addition operation should always take place at the tail. The current node at the end of the list should have a next pointer pointing to the new node being added, and the new node should be assigned to the end of the list, which means that the new node should be set as the tail.

Moreover, the head should be established if the list is empty, and in this case, the new node will be both the head and the tail, with its next value being null. At the end of the queue, it is important to modify the last node's next pointer to point to the new node that has been inserted, making it the new last node.

On the other hand, to remove the head, the head node, which has been in the queue the longest, must be removed first. After removing the head node, we must modify the list's head pointer to reflect the next node as the new head. We can use the next pointer of the present head node to obtain the new head node. After getting the new head node, we can subsequently release the memory for the removed head node. This is how it's accomplished.

Finally, it's important to ensure that the head and tail pointers of the list are always maintained. When the last node is removed, the list becomes empty, and the head and tail pointers should be set to null to signify that there is no node in the list.

Know more about singly linked list here:

https://brainly.com/question/32288996

#SPJ11

The numerical values for the mesh currents that we have in the question are given as:

We first have to write the KVL

2 - 1(i₁ - i₂) + 3 - 5(i₁ - i₃) = 0

We have to expand the equation that we have above

2 - i₁ + i₂ + 3 - 5i₁ + 5i₃ = 0

take like terms

-i₁ - 5i₁  i₂ + 5i₃ = 5

=  6i₁ - i₂ - 5i₃ = 5

-1(i₂ - i₁) - 6 i₂ - 9(i₃ - i2) = 0

after expanding we would have

i₁ - 16i₂ + 9i₃ = 0------- equation 2

-5 (i3 - i1) - 3 - 9(i3 - i2) - 7i3 = 0

5i1 + 9i2 - 2i3 = 3 ------ equation 3

From the equations that we have in 1, 2 and 3, we would solve the system of equations to get

1i = 0.9892 = 0.9892 ampere

i2 = 0.1501 ampere

i3 = 0.1570 ampere

These are the mesh current that are in the labeled diagram.

Read more on mesh current here:

https://brainly.com/question/28192863

#SPJ1

i] The density of the pellet is 0.977 g/cm^{3}. ii] The macropore volume in cm^{3}/g is 0.205 cm^{3}/g. iii] The macropore void fraction in the pellet is 25.1%.iv] The micropore void fraction in the pellet is 49.0%. v] The solid fraction of the pellet is 25.9%. vi] The density of the particles is 1.222 g/cm^{3}.

i] To determine the density of the pellet, we can use the formula:

Density = Mass / Volume

Given that the mass of the pellet is 3.15 g and the volume is 3.22cm^{3}, we can calculate the density as follows:

Density = 3.15 g / 3.22 cm^{3}≈ 0.977 \(g/cm^{3\)

ii] The macropore volume in cm3/g can be calculated by dividing the macropore volume of the pellet (0.645 cm3) by the mass of the pellet (3.15 g):

Macropore volume = 0.645 cm^{3} / 3.15 g ≈ 0.205 \(cm^{3} /g\)

iii] The macropore void fraction in the pellet can be calculated using the formula:

Macropore void fraction = Macropore volume / Total volume of the pellet

Total volume of the pellet = Volume - Macropore volume = 3.22 cm^{3}- 0.645 cm^{3} = 2.575 cm^{3}

Macropore void fraction = 0.645 cm^{3} / 2.575 \(cm^{3}\)≈ 0.251 or 25.1%

iv] The micropore void fraction in the pellet can be calculated using the given micropore volume of the particles (0.40 cm^{3} /g) and the mass of the pellet (3.15 g):

Micropore volume in the pellet = Micropore volume/g x Mass

Micropore volume in the pellet = 0.40 \(cm^{3} /g\) x 3.15 g = 1.26 cm3

Micropore void fraction = Micropore volume in the pellet / Total volume of the pellet

Micropore void fraction = 1.26 \(cm^{3}\) / 2.575 \(cm^{3}\) ≈ 0.490 or 49.0%

v] The solid fraction of the pellet can be calculated by subtracting the sum of macropore and micropore void fractions from 1:

Solid fraction = 1 - (Macropore void fraction + Micropore void fraction)

Solid fraction = 1 - (0.251 + 0.490) ≈ 0.259 or 25.9%

vi] The density of the particles can be determined using the mass of the pellet (3.15 g) and the total volume of the particles:

Total volume of the particles = Volume - Macropore volume = 3.22 \(cm^{3}\)- 0.645 \(cm^{3}\) = 2.575\(cm^{3}\)

Density of the particles = Mass / Total volume of the particles

Density of the particles = 3.15 g / 2.575\(cm^{3}\) ≈ 1.222 \(g/cm^{3}\)

For more questions on pellet

https://brainly.com/question/14809745

#SPJ8

Answer:

Explanation:

In satellite communications, downlink is the establishment of a communications link from an orbiting satellite down to one or more ground stations on Earth. Contrast with uplink.

A Windows tool called Resource Monitor allows for real-time monitoring and is particularly helpful in locating hardware and software bottlenecks. Users may view usage statistics for the areas of CPU, memory, disk, and network thanks to this display.

A Windows tool called Resource Monitor allows for real-time monitoring and is particularly helpful in locating hardware and software bottlenecks. By launching Task Manager and selecting the "Performance" option, you can get to it. Users may view usage statistics for the areas of CPU, memory, disk, and network thanks to this display. Additionally, it offers comprehensive details on each procedure or service and enables customers to track resource usage over time. Users that utilize Resource Monitor can quickly and efficiently troubleshoot problems by locating the bottleneck's origin. Additionally, it allows you to organize processes according to how much resource they are using and take the necessary steps, including terminating processes, preventing application launches, and altering network settings.

Learn more about software here-

brainly.com/question/29946531

#SPJ4

Japan's most recent development is the Linear High-Speed Train, which travels at extremely fast speeds thanks to electromagnetic fields.

Japan has led the world in advanced rail technology ever since the Shinkansen bullet train was invented in the 1960s. Japan's most recent development is the Linear High-Speed Train, which travels at extremely fast speeds thanks to electromagnetic fields. A test version of the new technology recently set a world record for a manned vehicle with a speed of 581 kilometers per hour, after fifty years of development.

A brand-new motor known as a superconducting linear motor powers the train. The idea behind this is that magnets work. You probably already know that a magnet's north and south poles attract one another, whereas two poles that are the same (north and north, or south and south) repel one another. Using the attracting and repelling forces generated by coils in the tracks and magnets inside the train, the new technology applies this principle to propel the train forward.

To learn more about electromagnetic technology visit:

https://brainly.com/question/30169285

#SPJ4

Unwanted static traits in measurement systems include drift, static inaccuracy, dead zone, and non-linearity.

Explanation:Sincerity is not a fixed quality.It is an element of an instrument's dynamic.In terms of measurements, fidelity relates to how accurate a number is when compared to a quantity that hasn't experienced any dynamic mistakes.

It offers a definition for each of the five key attributes of a measuring device: scale length, sensitivity, accuracy, "finesse," and response time.

To know more about measurement visit:

https://brainly.com/question/4725561

#SPJ4

An electronic instrument is considered a synthesizer if it produces sound by generating or altering waveforms using electronic circuits or digital signal processing.

A synthesizer is an electronic musical instrument that can produce a wide range of sounds by generating and altering waveforms through various techniques. In essence, a synthesizer converts an electrical signal into sound. A synthesizer can produce sounds that mimic traditional acoustic instruments, such as pianos, guitars, and strings, as well as generate entirely new sounds that cannot be produced by traditional instruments.

The following are some of the characteristics that set synthesizers apart from other electronic instruments:

Learn more about electronic instrument:

https://brainly.com/question/28815548

#SPJ11

The data type which would be continuous is: B. The amount of snow that fell last night.

In Computer technology, a continuous data can be defined as a data set that has infinitely many possible values and those values cannot be counted, which simply means that they are uncountable.

Generally speaking, quantities such as height, volume, speed, distance, weight, density, length, pressure, temperature, and time are generally a continuous data.

In this context, we can reasonably infer and logically deduce that "The amount of snow that fell last night." would be categorized as a continuous data because it can assume any value in an interval.

Read more on continuous data here: https://brainly.com/question/17141874

#SPJ1

Answer:

Scheduling is a process of create a structure that shows the way a schedule is organized before developing a complete and final schedule of a project.

Explanation:

This is the initial step in of developing a project schedule for a capital cost project. At this stage, the estimates for the project are done involving the various actions in the project. A lot of details are included in this  schedule showing the activities that are to be performed and the constraints involved.

Answer:

commercial freezing

Explanation:

smaller ice crystals are formed this causes less damage to cell membranes so the quality is less effected

step: 1 of 16

The static thrust is defined as such a force which is developed and applied by the jet engine on the surrounding air or earth when the airplane is at rest condition.

Power is defined as the rate of doing work with respect to time. Power is a scalar quantity and having no direction. The unit of power is J/s  or watt in an hour(w) .

The expression to calculate the resultant power Ps  is,

PRETV  …… (1)

Here, Ps  is the required power, T R  is the required thrust and is the velocity of the airplane at a certain altitude.

The expression for the actual power for two engines is,

P, = 2(TV)  …… (2)

Here, т.  is the actual thrust and  is the velocity of the airplane for a given altitude.

step: 2 of 16

Write the expression for the thrust of an airplane.

TRE W CIC)  …… (3)

Here, T R  is the required thrust, W  is the weight of the airplane, с. is the lift polar coefficient of the airplane and Ср  is the drag polar coefficient of the plane.

Write the expression for the lift polar coefficient of the airplane.

W C 1 2P. Vis  …… (4)

Here, P  is the air density,  is the velocity of the airplane for a given altitude and S  is the wing area.

Write the expression for drag polar coefficient.

C, = CD,0 + C πε(AR)  …… (5)

Here, Сро  is the zero-lift drag coefficient,  is the Oswald’s efficiency factor and AR  is the aspect ratio.

It is clear from the power required curve that maximum velocity at the altitude at 5 km is

Hence, the required maximum velocity at the altitude of 5 km  is295 m/s.

You can learn more through link below:

https://brainly.com/question/15218114#SPJ4

The three types of irony are Verbal Irony, Situational Irony, and Dramatic Irony.

Example of Verbal Irony:

Example of Situational Irony:

Example of Dramatic Irony:

What is Irony?

When something unexpected occurs, it is ironic. The thing opposite to what we anticipate usually occurs, and this is either humorous or dramatic.

To learn more about Irony:

https://brainly.com/question/24267033

#SPJ4

The ER diagram for the Temporary Employment Corporation (TEC) based on the business rules given is given below: Attributes for Entities:

(One-to-Many)One candidate can have many job histories. (One-to-Many)One job history can belong to only one candidate. (One-to-One)One placement can belong to only one candidate. (One-to-One)One job opening can be placed by many placements. (One-to-Many)One candidate can have many placements.

In the given diagram below, all the relationships and primary keys are labeled correctly and the ER diagram is resolved for all M:N relationships and 1:N relationships. If you want to add more attributes to each entity, you can do it accordingly:

To know more about Employment visit:

https://brainly.com/question/17459074

#SPJ11

The fission products, uranium, plutonium, and transplutonium metals that make up used nuclear fuel are a complicated mixture. Metals from the platinum group, including palladium, will be present as nanoparticles in the fuel.

Atoms are split in a reactor to produce electricity by spinning a turbine while also heating water to create steam. Nearly 20 percent of the country's electricity is produced by 93 nuclear reactors spread across 28 states; none of these reactors emit any carbon dioxide because they run on uranium instead of fossil fuels.

In order to produce steam, which spins a turbine and powers a generator, the heat produced by splitting the U-235 atoms is subsequently utilised.

To know more about fission visit :-

https://brainly.com/question/2732120

#SPJ4

The application layer, also known as the presentation layer, is responsible for handling all application operations between a user and an organization's back end business systems.

What do you mean by application layer?

The application layer is a layer in the Open Systems Interconnection (OSI) model, which is a standard model for the design of computer networks. The OSI model consists of seven layers, each of which is responsible for a different aspect of the communication process between computer systems.

The application layer is the highest layer in the OSI model and is closest to the end user. It is responsible for providing the services that directly support the user applications, such as file transfers, email, and virtual terminal access.

The application layer, also known as the presentation layer, is responsible for handling all application operations between a user and an organization's back end business systems. It acts as an intermediary between the user interface and the back end systems, ensuring that the user's requests are properly processed and that the resulting data is formatted and presented in a user-friendly manner.

This layer is responsible for implementing the logic required to perform actions such as data validation, authentication, and authorization, and it is also responsible for maintaining the user's session state and presenting the user with appropriate error messages in the event of any issues.

Learn more about application layer click here:

https://brainly.com/question/14972341

#SPJ4

https://vm.tiktok.com/ZSeMW4ttQ/ https://vm.tiktok.com/ZSeMW4ttQ/ https://vm.tiktok.com/ZSeMW4ttQ/ https://vm.tiktok.com/ZSeMW4ttQ/

Answer:

Friction

Explanation:

Heavy objects take an extended way to get to a full halt, so they have a lot of friction.

An item with high weight is forced down to something like a surface of stronger power than an item with small weight and, as a result, there is a greater pressure between the base of the large weight than the one between ground and the small one.

Answer:

friction

Explanation:  It has a lot of mass so it will interact with the railroad. When you interact with the railroad, it is called friction. That will make the train slower.

Hope this helps! Stay Safe!

Until emergency assistance arrives, portable fire extinguishers can put out or manage a fire.

The use of portable fire extinguishers can put out or contain a fire until emergency assistance is received.

Utilize portable units exclusively for small flames or fires that are still in the early stages because their discharge times are often only a few seconds. Make a plan for a getaway. Avoid breathing in the extinguishing agent and smoke by keeping low to the ground.

Only use a portable fire extinguisher when a fire is small, restricted to a single area, and not made up of extremely flammable materials. If the fire becomes out of control, leave the premises right away and get assistance.

To learn more about fire extinguishers refer to:

https://brainly.com/question/17687941

#SPJ1

An “open-loop system” is described by the reality that the output sign or circumstance is neither measured nor “fed back” for comparison with the enter signal or machine set factor. Therefore open-loop structures are generally stated as “Non-remarks structures”. A closed loop control system is a mechanical or digital tool that routinely regulates a system to hold a favored kingdom or set factor without human interaction. It makes use of a feedback system or sensor.

Learn more about loop, here https://brainly.com/question/14390367

#SPJ4

Customers are vital for the success of business logistics, as they drive demand and provide feedback. Pre-transaction customer service activities include product consultation, order processing, and complaint resolution.

Customer satisfaction is crucial for the success of any business logistics function. Customers play a vital role in driving demand, providing valuable feedback, and establishing long-term relationships. By focusing on customer needs and expectations, businesses can optimize their logistics operations to deliver products efficiently and effectively.

Effective pre-transaction-related activities of customer service are essential for building strong customer relationships. These activities involve engaging with customers before the actual transaction takes place, ensuring their needs are understood, and addressing any concerns or inquiries they may have. Examples of pre-transaction customer service activities include:

1. Product Information and Consultation: Providing detailed information about products or services, explaining their features and benefits, and offering recommendations based on customer requirements. For instance, a customer service representative might assist a customer in selecting the right size and specifications for a product they intend to purchase.

2. Order Processing and Tracking: Assisting customers in placing orders, confirming order details, and providing updates on the order status. This can involve addressing any issues related to inventory availability, payment processing, or delivery scheduling. For example, a customer service team may help a customer track their package and provide real-time updates on its location and estimated delivery time.

3. Handling Inquiries and Resolving Complaints: Promptly addressing customer inquiries, concerns, or complaints to ensure a satisfactory resolution. This can involve troubleshooting technical issues, facilitating returns or exchanges, or offering compensation for any service failures. For instance, a customer service representative may assist a customer who received a damaged product and promptly arrange for a replacement or refund.

By engaging in these pre-transaction-related customer service activities, businesses can establish trust, enhance the customer experience, and increase the likelihood of repeat purchases and positive word-of-mouth. It sets the stage for a successful transaction and lays the foundation for a long-term customer-business relationship.

Learn more about Customer satisfaction

brainly.com/question/32389861

#SPJ11

Ok, I understand that you need help with a Java program that reads in the values for a tic tac toe game and evaluates whether X or O won the game. The program should read multiple games from a file, store each game in a matrix, and then determine the winner for each game.

To accomplish this, you will need to write two Java classes: TicTacToe and TicTacToeRunner. The TicTacToe class will contain the logic to determine the winner for each game, while the TicTacToeRunner class will read in the data sets from the file and call the determineWinner method for each game.

Here is an outline of the steps you can follow to complete this lab:

Create the TicTacToe class with a private 2D array to represent the tic tac toe board.

Add a public constructor to initialize the board with the values from a string passed as the argument.

Add a public method called determineWinner that checks for a horizontal, vertical, diagonal, or draw winner.

In the determineWinner method, check for a horizontal winner by iterating over each row of the board and checking if all three cells contain the same value (either 'X' or 'O').

Next, check for a vertical winner by iterating over each column of the board and checking if all three cells contain the same value.

Then, check for a diagonal winner by checking if either of the two diagonals contain the same value.

If none of the above conditions are met, the game is a draw.

Create a TicTacToeRunner class that reads in the number of data sets and each game from the file.

For each game, create a new TicTacToe object and call the determineWinner method to determine the winner.

Print out the winning player ('X', 'O', or "no winner") and the winning condition (horizontally, vertically, diagonally, or "cat's game").

I hope this helps you get started on your program. Let me know if you have any questions or need further assistance!

Learn more about  game in a matrix, and then determine the winner from

https://brainly.com/question/13215648

#SPJ11

Note that where Grizzly bears in captivity frequently display abnormal behaviors, such as repetitive pacing, swaying from side to side, and biting the bars of their enclosure, the statement that  best expresses the main conclusion of the above argument is: "Bears need to be in an environment as close as possible to their natural habitat." (Option 2)

Grizzly bears in captivity exhibit abnormal behaviors, which is a sign of poor animal welfare.

To improve their welfare, they need to be in an environment as close as possible to their natural habitat. Bear sanctuaries provide an ideal solution by providing an enriched and safe environment for the bears, mimicking their natural habitat. This helps to reduce abnormal behaviors and improve their overall quality of life.

Learn more about Grizzly Bears:
https://brainly.com/question/16554301
#SPJ1

Answer:

Read Below

Explanation:

Apparent power (volt-amperes) is the trigonometric sum of Real power (watts) and reactive power (volt-amperes reactive - VARs). Stated mathematically: VA squared = watts squared plus VARs squared

similarly, power factor, the ratio of real power to apparent power, is the cosine of the angle between the real power leg and apparent power hypotenuse of a right triangle (Reactive power being the other leg).

Just use these relationships and a bit of high school trigonometry and you can calculate the apparent power and power factor for the system you are describing.

Hopes this Helps :D

Mark me Brainiest Please : )

The power factor of the 65-kVA load, if the overall power factor is 0.85 lagging is 0.585 lagging​.

Apparent energy (volt-amperes) is the trigonometric sum of Real energy (watts) and reactive energy (volt-amperes reactive - VARs). Stated mathematically: VA squared = watts squared plus VARS squared similarly, energy component, the ratio of actual energy to obvious energy, is the cosine of the perspective among the actual energy leg and obvious energy hypotenuse of a proper triangle (Reactive energy being the opposite leg).

Just use those relationships and a chunk of excessive college trigonometry and you may calculate the obvious energy and energy component for the machine you're describing.

Read moe about the load :

https://brainly.com/question/2264373

#SPJ2