if betelgeuse were to radiate all of its energy at the peak-intensity wavelength, how many photons per second would it radiate?

The momentum of the car = 12978.9 kgm/s

The mass of the car, m = 1881 kg

The speed, v = 6.9 m/s

The momentum, ρ, is given by the formula:

ρ = mv

Substitute m = 1881, v = 6.9 into the formula

ρ = 1881 x 6.9

ρ = 12978.9 kgm/s

The momentum of the car = 12978.9 kgm/s

Answer:

v = 14.92 m/s

Explanation:

First, make a free body diagram and see the forces in the y-direction.

Use Newton's 2nd Law F = ma to replace ∑F_y with m * a_y.

The acceleration in the y-direction is the centripetal acceleration, a_c = v^2/r.

The normal force is 0 because this is where the rollercoaster is not falling off the track yet not touching the track.

The masses cancel out.

Solve for v to find the speed of the rollercoaster at the top of the loop.

The minimum speed the coaster must have at the top of the loop to not fall off the track is 14.92 m/s.

A vector is a DNA can be defined as a molecule which is used as a vehicle to artificially carry foreign genetic material into another cell, where it can be replicated and/or expressed.

What does this tell you about the number and distribution of ecori sites in the vector?

When a vector DNA is digested with restriction endonuclease such as EcoRI, the DNA molecule is cleaved at unique sites. EcoRI recognizes the six-base-pair sequence GAATTC in the vector DNA. On the number of sites this sequence is present in the vector, the DNA molecule is cleaved at those site. For example if this sequence is present at five sites in a vector DNA, then endonuclease EcoRI will digest the DNA molecule  into six fragments ranging from 3.6 to 21.2 kilobases long.

This is how we can tell about the number and distribution of ecori sites in the vector.

To know more about DNA from the given link

https://brainly.com/question/8806489

#SPJ4

Answer:

ok, I have taken that class my 8th-grade year I might be able to help what is the question tho kinda confused about that?

Explanation:

sorry ?

Answer:

Principal, Teacher, Curator, Writer

Explanation:

Answer:

In a longitudinal wave, the crest and trough of a transverse wave correspond respectively to the compression, and the rarefaction.

Explanation:

Answer:

I believe the answer is C.

Explanation: Hope this helps and have a great day! :)

Answer:

Explanation:

The chart of details is given to us.

We have three energies. Potential is due to the position of the body , kinetic due to the motion of the body and mechanical is due to both the sum of potential and kinetic energy.

Now the law of conservation of energy states that when a body moves from one position to another it's total energy is conserved or remains constant.

Same is the case here we see that at different points, A, B, C and D the energy changes forms but the total energy remains the same which is the mechanical energy and thus we get the ratio as 1.00, 1.01, 1.02 ≅ 1.00

The potential energy is calculated using the formula PE= mgh

The kinetic energy is calculated using the form KE= 1/2mv²

The mechanical energy = Kinetic energy + Potential energy

Now at Point A height is 8 m which is maximum and the speed is zero which is the minimum .So the total energy = potential energy

ME= 3136+ 0 = 3136 J

We get the mass from PE

PE= mgh

3136 = m *9.8 *8

3136/627.2=m

m= 49.64 kg

Now at Point B height is 3.9 m which has reduced and so the potential energy reduces and the speed becomes 9 m/s which is the maximum and the kinetic energy at this point is also is maximum. So the total energy = potential energy + kinetic energy

ME= PE+ KE

ME= 1528.8+ 1620 = 3148.8 J

Now at Point C height is 4.2 m which has increased and so the potential energy increases and the speed becomes 8.8 m/s which has reduced and the kinetic energy at this point also reduces. So the total energy = potential energy + kinetic energy

ME= PE+ KE

ME= 1646.4+ 1548.8 = 3195.2 J

Now at point D height is 2 m which is minimum and the speed is 11m/s which is the maximum .So the total energy = potential energy + kinetic energy

ME= PE +KE

ME = 784 + 2420= 3204 J

If we calculate the individual KE and PE at points A,B, C, D using m= 49.64kg we will get different answers to the ones given in the chart. That is because some gradient of the kinetic energy is lost as the frictional force or as limiting friction only a part of the PE or kinetic remains which gives the total mechanical energy.

Option C is correct. The center of gravity of a homogeneous body is the point at which the weight of the body can be assumed to be concentrated.

The focal point of gravity of a homogeneous body is the place where the whole weight of the body can be thought to be concentrated. A homogeneous body is one in which the thickness is uniform all through its volume.

The focal point of gravity is the place where the body will adjust when suspended starting there. It is additionally the place where the gravitational power following up on the body can be considered to act.

On account of a strong body, the focal point of gravity is commonly situated at the mathematical focus of the body. For unpredictably molded bodies, the focal point of gravity can be resolved utilizing numerical estimations that consider the conveyance of mass all through the body. The focal point of gravity is a significant idea in material science and is utilized in numerous applications, including the plan of designs and vehicles.

To learn more about centre of gravity, refer:

https://brainly.com/question/20384349

#SPJ4

Answer:

1) vitamins

2) Meat, eggs, liver

Explanation:

1) Low levels (deficiency) in vitamins such a vitamin B12 and vitamin D can lead to tiredness.

Vitamin B12 is one of the most important nutrients for energy because it helps the blood, digestive system, brain and nervous system. Vitamin D is necessary for bone health and good immune function.

2) To prevent deficiency in vitamins, foods such as beef, eggs, liver, fish can be eaten. Also, supplements such as B-complex vitamin can be taken.

The wheels are free to rotate, and the drive wheels are rotating with the constant angular velocity is the correct answer is C) A point on the rim has a nonzero tangential acceleration but no centripetal acceleration.

When the drive wheels are rotating with constant angular velocity, the car is not accelerating in a circular path, so there is no centripetal acceleration. However, since the wheels are rotating, there is a tangential acceleration that causes a change in the car's speed. The hydraulic lift is not the relevant to this question, as it only allows the wheels to rotate freely.

Learn more about angular velocity here: brainly.com/question/29557272

#SPJ11

answer :

force is called the magnetic force of repulsion, and it happens when two magnets have the same poles (either both north or both south) and they push away from each other.

When all the domains in a material are aligned in the same direction, the material becomes strongly magnetized.

explanation :

magnetic domains in the rings were stable and strong enough to resist the force of gravity.

In the case of the levitating rings, the magnetic domains were aligned in such a way that they created a strong magnetic field, which allowed the rings to levitate in mid-air.

tiny regions within ferro magnetic  material that have their own magnetic fields are called magnetic domains.

Magnetic domains in the rings refer to the tiny regions within the ring's ferro magnetic material that have their own magnetic fields.

Answer:

Explanation:

F = -kΔx

Since the spring constant is given in N/m, we need to convert the stretch to meters as well.

12 cm = .12 m

Now we can solve the problem:]

F = -55(-.12) so

F = 6.6N

The force required to stretch the spring is 6.6 N

The force acting on a spring is given by:

Force (F) = spring constant (K) × Extention (e)

F = Ke

With the above formula, we can obtain the force required to stretch the spring as follow:

F = Ke

F = 55 × 0.12

F = 6.6 N

Learn more about force on spring:

https://brainly.com/question/25559287

The table and the book would be moving in the opposite dierection as the train because the train is in motion.

Newton's laws of motion are three fundamental laws that describe the relationship between the motion of an object and the forces acting on it.

From the statement of the Newton third law, the force that is acting on the books is as a result of the force that is acting on the train from the engine and that would be in the opposite direction as we can see in the question.

Learn more about Newton's law:https://brainly.com/question/1528005

#SPJ1

Open clusters, O and B stars, globular clusters and gas and dust lie in the halo of our galaxy, therefore the correct option is (E) all of the above

The halo of our galaxy contains a diverse array of objects, including open clusters, O and B stars, globular clusters, and gas and dust. Open clusters are groups of relatively young stars that formed from the same molecular cloud, while globular clusters are much older and contain hundreds of thousands of stars.

O and B stars are massive, hot stars that emit large amounts of ultraviolet radiation, which can ionize surrounding gas clouds. Gas and dust in the halo can form new stars or be illuminated by nearby stars, producing emission nebulae and other interesting structures.

Therefore, the correct option is (E) all of the above

Learn more about halo here

brainly.com/question/29531994

#SPJ4

The time it would take a 2500 W electric kettle to boil away 1.5 Kg of water is 2400 seconds

Use the formula:

Power × time = mass × specific heat

Given mass = 1. 5kg

Specific latent heat of vaporization = 4000000 J/ Kg

Power = 2500 W

Substitute the values into the formula

Power × time = mass × specific heat

2500 × time = 1. 5 × 4000000

Make 'time' the subject

time = 1. 5 × 4000000 ÷ 2500 = 6000000 ÷ 2500 = 2400 seconds

Therefore, the time it would take a 2500 W electric kettle to boil away 1.5 Kg of water is 2400 seconds.

Learn more about specific latent heat of vaporization:

https://brainly.in/question/1580957

#SPJ1

With the specified solar collector, it would take roughly 50,788.88 seconds or 14.11 hours to raise the temperature of 1.00 m3 of water from 20.0°C to 60.0°C.

The thermal loss is modest at low fluid temperatures, as depicted in Fig. 7.35. The efficiency of the solar collector is determined to be 75% at a fluid temperature of 100 °C, which is 78 °C above ambient temperature.

To start, let's figure out how much water there is in 1.00 m3:

Volume of water = 1.00 m3

Density of water = 1000 kg/m3 (at standard temperature and pressure)

Mass of water = Density x Volume = 1000 kg/m3 x 1.00 m3 = 1000 kg

Next, let's determine how much heat energy is needed to raise the water's temperature:

Q = mcΔT

Q = (1000 kg) x (4.18 J/kg·°C) x (60.0°C - 20.0°C)

Q = 167,200 kJ

Let's now determine how much energy the solar collector has totaled:

Energy = Intensity x Area x Time

Energy = (550 W/m2) x (6.00 m2) x Time

Energy = 3,300 W x Time

We may put the two equations equal since the heat energy necessary to raise the water's temperature must equal the energy received by the solar collector:

3,300 W x Time = 167,200 kJ

To solve for Time, we need to convert units:

1 W = 1 J/s

3,300 W = 3,300 J/s

1 kJ = 1,000 J

167,200 kJ = 167,200,000 J

So the equation becomes:

3,300 J/s x Time = 167,200,000 J

Solving for Time, we get:

Time = 167,200,000 J / 3,300 J/s

Time = 50,788.88 seconds

To know more about solar collector visit:-

https://brainly.com/question/2782139

#SPJ4

The required magnetic field (B) in Tesla (T) is approximately 3.077 x 10^7 divided by the thickness of the aluminum sensor (d).To determine the required magnetic field, we can use the Hall effect equation:

Hall Voltage (VH) = B * J * d * R

where VH is the Hall voltage, B is the magnetic field, J is the current density, d is the thickness of the material, and R is the Hall coefficient.

In this case, we are given that the Hall field (VH) is desired to be 10 mV/cm, and the current density (J) is 0.5 A/cm².

The Hall coefficient for aluminum (R) is approximately 1.3 x 10^-11 m³/C.

We can rearrange the equation to solve for the magnetic field (B):

B = VH / (J * d * R)

Substituting the given values:

B = (10 mV/cm) / (0.5 A/cm² * d * 1.3 x 10^-11 m³/C)

To convert mV to V and cm² to m², we need to multiply by appropriate conversion factors:

B = (10 x 10^-3 V/m) / (0.5 A/m² * d * 1.3 x 10^-11 m³/C)

Simplifying, we have:

B = (20 x 10^-3 V) / (0.5 * d * 1.3 x 10^-11 m³/C)

B = (40 x 10^-3) / (d * 1.3 x 10^-11)

B ≈ 3.077 x 10^7 / d

Therefore, the required magnetic field (B) in Tesla (T) is approximately 3.077 x 10^7 divided by the thickness of the aluminum sensor (d).

To learn more about magnetic field click here: brainly.com/question/14411049

#SPJ11

240 miles is the  distance between dallas and houston.

1 inch=  50 miles

4. 8 inch= 50×4.8 = 240 miles

Distance is the length between two points or items, and it is directionless. Since distance is a scalar property, it solely takes into account the entire magnitude and ignores the start and finish locations. Being a scalar attribute, distance may only be positive or zero; it cannot be the opposite.

Although kilometers (km) and centimeters (cm) or millimeters (mm) can also be used to indicate shorter distances, the meter (m) is the most used unit of measurement for distance (mm). When calculating distance, the letter D is usually used to denote the distance traveled.

To know more about  distance visit : brainly.com/question/12626613

#SPJ4

In order for the 2.09 m tall clown to see his feet in the full-length mirror, he must look at a point approximately 1.045 m above the floor. It is due to the law of reflection.

The light from the clown's feet reflects off the mirror and reaches his eyes as he examines himself in the mirror. The law of reflection, which stipulates that the angle of incidence equals the angle of reflection, must be followed by the light rays in order for this to occur.

The light rays from the clown's feet must bounce off the mirror at an angle that is equal to the angle at which they reach the mirror because the clown's eyes are roughly halfway between the top and bottom of the mirror. This indicates that the clown must fix his gaze on a spot that is situated midway between the ground and his eyes.

Since the clown is 2.09 m tall, this point would be approximately 1.045 m above the floor. At this height, the clown will be able to see his feet in the mirror.

To know more about law of reflection here https://brainly.com/question/46881

#SPJ4

Answer:

1200 watt

Explanation:

P= I*V=10*120=1200watt

Answer:

https://medlineplus.gov/spanish/healthrisksofaninactivelifestyle.html

Explanation:

Cuando usted tiene un estilo de vida inactivo:

   Quema menos calorías. Esto hace que usted tenga más probabilidades de subir de peso

   Puede perder masa muscular y resistencia, porque no usa tanto sus músculos

   Los huesos se debilitan y pierden algo de su contenido mineral

   Su metabolismo puede verse afectado y su cuerpo puede tener más problemas para sintetizar grasas y azúcares

   Su sistema inmunitario quizás no funcione tan bien

   Puede tener una mala circulación de la sangre

   Su cuerpo puede tener más inflamación

   Puede desarrollar un desequilibrio hormonal

Cuando usted tiene un estilo de vida inactivo:

   Quema menos calorías. Esto hace que usted tenga más probabilidades de subir de peso

   Puede perder masa muscular y resistencia, porque no usa tanto sus músculos

   Los huesos se debilitan y pierden algo de su contenido mineral

   Su metabolismo puede verse afectado y su cuerpo puede tener más problemas para sintetizar grasas y azúcares

   Su sistema inmunitario quizás no funcione tan bien

   Puede tener una mala circulación de la sangre

   Su cuerpo puede tener más inflamación

   Puede desarrollar un desequilibrio hormonal

The type of electromagnetic wave that is primarily used in communication is radio waves, which have frequencies between about 3 kHz and 300 GHz.

Radio waves are used for various forms of communication, including radio and television broadcasting, cell phone and Wi-Fi communication, and satellite communication. They are preferred for communication because they can travel long distances through the atmosphere and can penetrate walls and other obstacles without significant attenuation. Infrared waves are also used in communication, primarily for short-range wireless communication such as in remote controls and some wireless headphones, but they have limited range compared to radio waves. Ultraviolet waves and gamma rays are not used for communication purposes as they have very high frequencies and can be harmful to living organisms.

To learn more about electromagnetic wave here:

https://brainly.com/question/3101711

#SPJ4

The metal ball lost energy while the putty ball gained energy.

Momentum is the product of mass and velocity of the body. We must note that momentum before collision is equal to momentum after collision.

1) Kinetic energy before collision = 1/2mv^2 = 0.5 * 6 * 4 = 12 J

2) kinetic energy after collision = 0.5 * 6 *  2= 6 J

3) Kinetic energy of putty ball = 0.5 * 6 *  2= 6 J

4) Energy lost by the metal ball = 12 J -  6 J = 6 J

5) Energy gained by the putty ball = 6 J - 0J = 6 J

6) The rest of the energy was converted to heat after the collision.

Learn more about kinetic energy: https://brainly.com/question/999862

Q₁ and U₁ when switch S connects V₀ and C₁ is 12.0 V.

New charge and potential across and energy stored on all three capacitors is 32.7 mJ.

a) When switch S connects V₀ and C₁, the charge Q₁ on capacitor C₁ is given by:

Q₁ = C₁ V₀

Substituting the given values:

Q₁ = (4.00 μF) (12.0 V) = 48.0 μC

The potential difference U₁ across capacitor C₁ is given by:

U₁ = Q₁ / C₁

Substituting the value of Q₁ and C₁:

U₁ = (48.0 μC) / (4.00 μF) = 12.0 V

Therefore, the charge Q₁ on capacitor C₁ is 48.0 μC and the potential difference U₁ across capacitor C1 is 12.0 V.

b) When switch S is changed to connect the three capacitors, the equivalent capacitance C of the circuit is given by:

1/C = 1/C₁ + 1/C₂ + 1/C₃

Substituting the given values:

1/C = 1/4.00 μF + 1/6.00 μF + 1/3.00 μF = 0.575 μF

Therefore, the equivalent capacitance of the circuit is:

C = 1 / 0.575 μF = 1.74 μF

The charge Q on the equivalent capacitor is conserved:

Q = Q1 = 48.0 μC

The potential difference U across the equivalent capacitor is given by:

U = Q / C

Substituting the values of Q and C:

U = (48.0 μC) / (1.74 μF) = 27.6 V

The energy stored on each capacitor is given by:

E = (1/2) C V²

where C is the capacitance and V is the potential difference across the capacitor.

For capacitor C₁:

E₁ = (1/2) C1 U²

Substituting the value of C₁ and U:

E₁ = (1/2) (4.00 μF) (27.6 V)² = 8.57 mJ

For capacitor C₂:

E₂ = (1/2) C₂ U²

Substituting the value of C₂ and U:

E₂= (1/2) (6.00 μF) (27.6 V)² = 19.3 mJ

For capacitor C₃:

E₃ = (1/2) C₃ U²

Substituting the value of C₃ and U:

E₃ = (1/2) (3.00 μF) (27.6 V)² = 4.82 mJ

Therefore, the total energy stored on all three capacitors is:

E_total = E₁ + E₂ + E₃ = 8.57 mJ + 19.3 mJ + 4.82 mJ = 32.7 mJ

Learn more on capacitors here: https://brainly.com/question/27393410

#SPJ1

The car accelerates 60 mph in 6.3 seconds. Thus, the acceleration is \(\frac{60}{6.3}\). \(f=ma\), so \(4106 = m(\frac{60}{6.3})\), so \(m=431.13\).

1.44*10^-3N  is the force on each other. when 33 centimeters separates one charge from another charge. They both have charges of 1.2 x 10-5 coulombs.

Charge on the first sphere, q 1​ =1.2 x 10^-5  C

Charge on the second sphere, q 2 =1.2 x 10^-5  C

Distance between the spheres, r=30cm=0.3m

F= 4πε

​ q 1 q 2/  r2

​Where, ε 0

​ = Permittivity of free space 4πε 0

=9×10^9Nm2

F= (0.33) 2

1.2 x 10^-5 * 1.2 x 10^-5  C = 1.44*10^-3N

Hence, force between the two small charged spheres is 1.44*10^-3N.

The charges are of same nature. Hence, force between them will be repulsive.

learn more about Charge here:

https://brainly.com/question/14467573

#SPJ4

Answer:

68.6 m/s^2

Explanation:

1 g = 9.8 m/s^2

so

7 g × 9.8m/s^2 = 68.6

Answer:

Explanation:

Call the bike on the right A

Call the bike on the left B

The car begins it's time when it passes A

4 minutes later, it passes B.

But B has moved in 4 minutes and that is the key to the problem.

How far has B moved.

t = 4 minutes = 4/60 hours = 1/15 of an hour.

d = ?

rate = 30 km / hr

d = r * t

d = 30 km/hr * 1/15 hours = 2 km

The distance between the bikes is 5 km.

So the car has traveled 5 - 2 = 3 km

d = 3 km

r = ?

t = 4 minutes = 1/15 hour

r = d/t = 3/(1/15)= 3 / 0.066666666  = 45 km/hr.

Answer:

This level of needs is known as safety needs. Safety needs are the need for security, stability, and protection from physical and emotional harm. These needs include physical safety, financial security, health and well-being, and protection from discrimination and harassment.

Explanation: