HPS lamps tend to ______________ at the end of their life.
a. turn green
b. cycle
c. glow over-bright
d. fail instantly

The 255.5 kg/year waste is recycled per year. The percentage is also called the indicating hundredths. Thus, 2% is two-hundredth, which means 2%=2/100=0.02.

The percentage is defined as a given amount in every hundred. It is a fraction with 100 as the denominator percentage is represented by the one symbol %.

The percentage is also called the indicating hundredths. Thus, 2% is two-hundredth, which means 2%=2/100=0.02. The percentage is just like the amount of that value but between 1 to 100 and it is very useful to predict for example if you say 678 then we have to know about the full number also but if you say 80% then it becomes clear.

Therefore, The 255.5 kg/year waste is recycled per year. The percentage is also called the indicating hundredths. Thus, 2% is two-hundredth, which means 2%=2/100=0.02.

Learn more about percentage on:

https://brainly.com/question/29306119

#SPJ1

Answer:

Water Hammer

Explanation:

I come from a family of plumbers

Answer:

ser gay

Explanation:

no es malo y se fjfjdj gracias

Because she has a Victim mindset and having low grade in her Math class, Julianna believes: A. her low grades are the fault of her unfair teacher.

A Victim mindset is also referred to as victim mentality and it can be defined as an acquired personality trait in which an individual tends to recognize and believe that the negative and unfair actions of others towards him or her, is responsible for the bad and unpleasant things that happens.

This ultimately implies that, an individual with a Victim mindset is prejudiced and strongly believes that every other person is against him or her, and as such these people are responsible for their failures.

Read more on Victim mindset here: https://brainly.com/question/17116209

#SPJ1

Assignment 6 Rubric (1) Criteria:The criteria that must be met to fulfill the assignment 6 rubric (1) are as follows:

All lines are indented correctly

All lines are shorter than 80 columns

Comments at the top of the program:

First last name./ date / what your program doesThe run is included as a comment at the end of your code

The program is well-organized. Example: cout<< "Enter the time worked (in hours): ";cin >> hours_worked;cout<< "Enter the pay rate per hour: ";cin >> pay_rate;

The purpose of the program: The program must have a clear purpose and intention, which must be demonstrated in the code. The program must contain a prompt that clearly explains what it will achieve and what the user is supposed to enter or do.

Program Design: The program must be well-organized and easy to read. A good program design is one that has a clear and logical structure.

Indentation: All lines of code must be indented correctly. This helps to make the code easier to read and understand.Indentation is the process of starting a line of code in a specific position and using spaces or tabs to move subsequent lines of code in or out.Indentation helps in separating one block of code from another.

Comments: The comments should appear at the top of the program and should include the First last name./ date / what your program does. This is important because it helps to identify the person who created the program, as well as the date when it was created.

To know more about logical structure visit:

https://brainly.com/question/1290689

#SPJ11

In Python, when you assign a list to a new variable, as in new_list = old_list, it creates a reference to the original list rather than making a copy of it. So, if you modify the new list, it will also modify the original list.

In the given example, new_list is modified by changing its first element to 100. This change will also be reflected in old_list since they both reference the same list. So, this behavior can make Python less reliable in certain cases where you might expect a copy to be created instead of a reference.

However, this behavior can also make Python more writable and easier to work with in some cases where you want to make changes to a list without creating a new copy. It can also help to reduce memory usage by avoiding unnecessary copies of large data structures.

Overall, the behavior of Python lists in this case may not be immediately intuitive, but it is well documented and can be easily managed with proper understanding and use of Python's data structures.

Learn more about Python here:

https://brainly.com/question/31055701

#SPJ11

According to the question, the given statement of conductors at the point where the branch circuit originates is true.

What is conductors?
Conductors are materials that allow the flow of electrical energy. They are typically made of materials that contain free electrons, such as metals, that can move around freely when an electrical charge is applied. Conductors are essential for the functioning of electrical circuits and are used in a variety of applications from electrical wiring to power transmission. In addition to metals, other materials like semiconductors, graphite, and liquids can also be used as conductors. Conductors have a wide range of uses and are necessary for any type of electrical device or system. They are also used in various fields like engineering, telecommunications, physics, and computer science.

To learn more about conductors
https://brainly.com/question/22754783

#SPJ4

An alpha-numeric designator which is systematically assigned at the time of manufacture, so as to identify the manufacturer, month, year, location, and batch is referred to as lot number.

A product can be defined as any physical object (tangible item) that is typically produced by a manufacturer so as to satisfy and meet the demands, needs or wants of every customer. Also, some examples of a product include the following:

A lot number can be defined as an alpha-numeric designator which is systematically designed and assigned at the time of manufacture, so as to identify the manufacturer, month, year, location, and batch.

Read more on products here: brainly.com/question/14308690

#SPJ1

Explanation:

1 meter ≈ 3.281 ft.

so,

1 m² = 1m×1m ≈ 3.281 × 3.281 = 10.764961 ft²

now we have 22.3 ft² of skin.

that would be then

22.3/10.764961 = 2.071535605 ≈ 2.1 m² or even more rounded ≈ 2 m²

Answer:

Kh/Kv =  2.8

Explanation:

The horizontal conductivity = K1H1+K2H2+K3H3/(H1+H2+H3)

= K1H+K2H+K3H/3H

= K1+K2+K3/3

= 10-3 cm/sec + 10-3 cm/sec + 10-2 cm/sec/3

= 4 * 10^-3 cm/s

Vertical conductivity

= H+H+H/(H/K1 +H/K2+H/K3)

= 3/(1/K1+1/K2+1/K3)

= 1/700 cm/s

Kh/Kv = 4 * 10^-3 cm/s/ 1/700 cm/s

Kh/Kv =  2.8

Answer: hello some parts of your question is missing attached below is the missing information

The radiator of a car is a type of heat exchanger. Hot fluid coming from the car engine, called the coolant, flows through aluminum radiator tubes of thickness d that release heat to the outside air by conduction. The average temperature gradient between the coolant and the outside air is about 130 K/mm . The term ΔT/d  is called the temperature gradient which is the temperature difference ΔT between coolant inside and the air outside per unit thickness of tube

answer : Total surface area = 3/2 * area of old radiator

Explanation:

we will use this relation

K = \(\frac{Qd }{A* change in T }\)

change in T =  ΔT  

therefore New Area  ( A ) = 3/2 * area of old radiator

Given that the thermal conductivity is the same in the new and old radiators

Answer:

Explanation:

From the given information:

The first thing we need to do is to use the formula used in-plane strain fracture toughness to determine the geometry factor \(\gamma\)

i.e

\(K_1 = \gamma \sigma_{applied} \sqrt{Ra_1}\)

where;

a = crack length

\(\gamma =\) geometry factor

In the first scenario, where;

Plain fracture toughness \(K_1 = 45 \ MPa \sqrt{m}\)

\(\sigma _{applied} = 300 \ MPa \\ \\ a_1 = 6.95 \times 10^{-3} m\)

radius(R) = 3.142

Then, replacing it into the above equation, we have:

\(45 MPa = \gamma (300 \ MPa ) \sqrt{3.142 \times 0.95 \times 10^{-3}} \\ \\ 45 \ MPa = 16.3902715 \gamma \\ \\ \gamma = \dfrac{45 \ MPa}{16.3902715} \\ \\ \gamma \ (geometry factor)= 2.745\)

Now, since we've determined the geometry factor, it will be easier to estimate the max. allowable surface length.

∴

\(K_2 = \gamma \sigma_{applied} \sqrt{Ra _2}\)

\(67.5= 2.745 \times 300 \times \sqrt{3.142 \times a _2}\)

\(67.5= 1459.710372 \sqrt{ a _2} \\ \\ \dfrac{67.5}{ 1459.710372}= \sqrt{ a _2} \\ \\ 0.0462420 = \sqrt{ a _2} \\\\ a_2 = 0.0462420^2 \\ \\ a _ 2 = 0.002138 \\ \\ a_2 = 2.138\times 10^{-3} \ m \\ \\ \mathbf{a_2 = 2.138\ mm}\)

Answer:

It does not take into consideration what the responsible party knew about the law or regulation they violated. Environmental criminal liability is triggered through some level of intent.

In regards to whether an employee can be held legally liable for environmental violations, this statement is False.

This means that if an employee notices that a company is responsible for environmental violations, and does nothing about it, they could be held legally responsible for the violation as well.

In conclusion, this is true.

Find out more on environmental violations at https://brainly.com/question/15119899.

Answer:

The volume percent of graphite is 9.9%

Explanation:

Given;

weight percent of graphite, C = 3.1wt%

density of ferrite, \(\rho _f\) = 7.9 g/cm³

density of graphite, \(\rho _g\) = 2.3 g/cm³

Determine the mass fraction;

\(W_f = \frac{C_g - C_0}{C_g -C_f} \\\\W_f =\frac{100 - 3.1}{100-0}\\\\W_f = 0.969\\\\\\W_g = \frac{C_0 - C_a}{C_g -C_f} \\\\W_g =\frac{3.1-0}{100-0}\\\\W_g = 0.031\)

Determine the volume fraction;

\(V = \frac{W_g/ \rho_g}{W_f / \rho_f \ + \ W_g / \rho_g} *100 \%\\\\V = \frac{0.031/ 2.3}{0.969 / 7.9 \ + 0.031 / 2.3}*100\%\\\\V = 9.9\%\)

Therefore, the volume percent of graphite is 9.9%

The ideal response for the age standard deviation would be zero.

A standard deviation (or σ) is a measure of how distributed the data is in reference to the mean. When the standard deviation is low, the data are concentrated around the mean, and when it is large, the data are widely dispersed.

They invited 25 persons who recently turned 100 years old, so the majority of attendees will be between the ages of 100 and 102. There is extremely little likelihood that anyone will be older than 102.

Since the majority of the data are centered at 100, the standard deviation will be zero or very close to it.

Learn more about standard deviation on:

https://brainly.com/question/475676

#SPJ1

Which of the following best represents the standard deviation for the ages of the new centenarians?

0

100

30

25

The future departure system's development trend in the construction of smart airports is focused on improving productivity, automation, and passenger experience.

Airports are investing in intelligent solutions to streamline the departure process in response to technological improvements and the rising demand for air travel.

These solutions are designed to shorten wait times, enhance security, and facilitate smooth travel.

Significant development regions consist of:

The departure system, which works closely with other systems to guarantee that air travel runs without a hitch, is an essential feature of the civil aviation transportation system.

You can sum up its interaction with other systems as follows:

Thus, the aviation transportation system is essential for ensuring that planes depart on time and in an organised manner, maximising passenger flow.

For more details regarding aviation transportation system, visit:

https://brainly.com/question/30540630

#SPJ4

Answer:

Kirchhoff's current law (1st Law) states that the current flowing into a node (or a junction) must be equal to the current flowing out of it

Explanation:

A statement that assigns all elements in the array atomic Weights the value 1.003,independent of the size of the array is atomicWeights(:) = 1.0032.

An array is a grouping of identically typed components that are stored in adjacent memory locations and can each be individually referred to using an index to a special identifier. There is no need to declare five distinct variables when declaring an array of five int values (each with its own identifier). are by default not set. This indicates that none of the components in the array have any specific values assigned to them; rather, their contents are unknown at the time the array is declared.

Know more about Array statements here:

https://brainly.com/question/12947892

#SPJ4

For FM modulation, the in-phase and quadrature components can be determined by differentiating the phase of the modulating signal with respect to time. The envelope can be determined by taking the absolute value of the modulated signal, and the phase can be determined by taking the phase angle of the modulated signal.

For PM modulation, the in-phase and quadrature components can be determined by integrating the phase of the modulating signal with respect to time. The envelope can be determined by taking the absolute value of the modulated signal, and the phase can be determined by taking the phase angle of the modulated signal.

To learn more about PM FM modulation :

https://brainly.com/question/30035950

#SPJ11

The primary majority of sUAS utilize GPS to coordinate base location and tracking in the United States, sUAS beyond visual line of sight inspections of pipelines and power lines are routinely carried out every day.

The meaning of GPS is Global Positioning System. This is a radio navigation system that is satellite-based. This system is installed on mobile phones and computers. GPS can tell the position of that phone or the person using that phone.

Thus, In the United States, sUAS beyond the optical line of sight inspections of pipelines and electrical lines are routinely carried out every day. The vast majority of sUAS use GPS to coordinate base position and tracking.

To learn more about GPS, refer to the link:

https://brainly.com/question/17192642

#SPJ1

For the following options, the given File Organisations would be used:

a. For a file that is updated infrequently and accessed frequently in random order, I would recommend using an Indexed File Organization. This is because indexed files provide quick and efficient access to records, making it ideal for frequent random access. Additionally, the use of storage space is optimized as records can be stored non-sequentially, and updating records is relatively straightforward.

b. For a file that is updated frequently and accessed in its entirety relatively frequently, a Sequential File Organization would be a good choice. This is because sequential files allow for efficient bulk processing of records, which is ideal when accessing the file in its entirety. Although adding or deleting records may require reorganization, the benefits of faster processing and minimal use of storage space outweigh the drawbacks in this scenario.

c. For a file that is updated frequently and accessed frequently in random order, a Hashed File Organization would be the most suitable choice. This is because hashing allows for direct access to records, ensuring fast retrieval and update times. Additionally, hashed files can effectively handle frequent updates, as records can be added, deleted, or modified easily without requiring significant reorganization of the entire file.

Thus, choose the File Organisations accordingly.

Learn more about storage space: https://brainly.com/question/26382243

#SPJ11

Answer: you forgot to add the rest of the Questions in.

Answer:

240

Explanation:

The highest voltage typically encountered on the job by a residential electrician is C. 240 volts.

Voltage is the measure of the difference in electrical power between two points in a circuit.

It is like the force that pushes electric charges in a circuit and is measured in volts (V) and affects how strong the electric current flows in a wire.

In many countries, the United States included, residential electrical systems often use a split-phase setup with a voltage of 120/240 volts.

This voltage is widely used for things like household appliances, lights, and other electrical needs in homes.

Learn more about electrical voltage at brainly.com/question/27861305

#SPJ2

Answer:

c

Explanation:

Answer: The Answer is B

Explanation:

Sensors in a vehicle with a side sonar system are typically located on the side bumpers or door panels. They are evenly distributed along the length of the vehicle for effective detection.

A side sonar system in a vehicle is designed to detect obstacles and other objects near the sides of the car during maneuvers such as parking or changing lanes. To ensure comprehensive coverage, multiple sensors are embedded along the side bumpers or door panels.

These sensors emit ultrasonic waves that bounce off nearby objects and return to the sensors, allowing the system to calculate the distance to the detected object. This information is then relayed to the driver through visual or auditory cues, helping them make safe driving decisions. The precise location of sensors may vary depending on the vehicle make and model.

To Know more about sensors visit:

brainly.com/question/29569820

#SPJ11

To measure the density of seawater at a particular depth using the device described in the prompt, the engineer should:

• Adjust the weights until the instrument is at equilibrium rest, then determine the density of the seawater using the instrument's known mass and volume.

Fb=I Vg, where I is the density of the seawater, V is the volume of the device, and g is the acceleration due to gravity, gives the buoyant force that the seawater exerts on the object. The buoyant force must be equal to the weight of the device plus any additional weights because when the gadget is in equilibrium, the sum of all forces acting on it is zero. The density of the saltwater can be determined by calculating the total mass of the apparatus, including the extra weights, and using the apparatus's known volume.

Option A entails filling the device with a predetermined amount of seawater, which would alter its volume and make it challenging to precisely determine the density of the seawater. Making the gadget fall at a steady speed is Option C, which is not required to determine the density of the saltwater. Option D involves loading the apparatus with weights and a known volume of seawater until it lowers steadily, however this method is not precise enough to determine the density of the saltwater.

To know more about Density of Seawater kindly visit

https://brainly.com/question/13092998

#SPJ4

Option b) Angle Head centrifuge is the best centrifuge for urinalysis department is not true.

A centrifuge is a laboratory instrument that separates fluids, gases, or liquids by spinning them at high speeds. Because it creates a centrifugal force that separates the molecules based on size, shape, and density, it is effective.

In a centrifuge, a sample is placed in a test tube that is placed in a rotor. When the rotor spins, the centrifugal force is created. The sample particles move outward, and the denser particles are pushed toward the bottom of the test tube. The less dense particles will rise to the top of the test tube. After spinning, the sample is separated and ready for further examination.

You can learn more about centrifuge at: brainly.com/question/31465291

#SPJ11