faa each person operating an aircraft at a vfr cruising altitude shall maintain an odd-thousand plus 500-foot altitude while on a
Answers
VFR (Visual Flight Rules) cruising altitude regulations require each person operating an aircraft to maintain an odd-thousand plus 500-foot altitude while on a magnetic course of 0-179 degrees.
This means that the aircraft should maintain altitudes such as 3,500 feet, 5,500 feet, 7,500 feet, and so on. The purpose of this rule is to establish consistent altitude separation between aircraft flying in the same direction. By assigning odd-thousand plus 500-foot altitudes for aircraft on magnetic courses of 0-179 degrees,
there is a predictable pattern of altitude assignments, which helps maintain safe separation between aircraft. It is important for pilots to adhere to these regulations to ensure proper vertical separation and reduce the risk of mid-air collisions. By following the assigned altitudes based on their magnetic course, pilots can help maintain a well-organized and structured air traffic environment.
Learn more about VFR (Visual Flight Rules here
https://brainly.com/question/32284738
#SPJ11
Related Questions
water (which you may consider to be an ideal fluid) is flowing in a horizontal tube. at a certain point the tube's diameter is decreased to half of its original size. what happens to the volume flow rate at that point?
Answers
The volume flow rate at the point at which the diameter of the tube is reduced to half of its original size is four times the original flow rate.
The discharge rate of water flowing in pipes with different diameters will always be the same
Q₁ = Q₂
A₁ v₁ = A₂ v₂
Q = discharge rate (m³/s)v = volume flow rate (m/s)A = area of pipe (m²)The volume flow rate in the pipe is equal to the average speed of the water flow. Because the cross-section of the pipe is circular
A = πr² = π × (0.5d²) = 0.25πd²
r = radius of the piped = diameter of the pipeπ = 3.14A₁ v₁ = A₂ v₂
0.25πd₁² × v₁ = 0.25πd₂² × v₂
d₁² × v₁ = d₂² × v₂
d₁ = diameter of the pipe at original point = dv₁ = volume flow rate at original point = vd₂ = diameter of the pipe at a certain point = 0.5dv₂ = volume flow rate at a certain pointd₁² × v₁ = d₂² × v₂
d² × v = (0.5d)² × v₂
d² × v = 0.25d² × v₂
v₂ = d² × v ÷ 0.25d²
v₂ = v ÷ 0.25
v₂ = 4v
Learn more about volume flow rate here: https://brainly.com/question/29417540
#SPJ4
what is the acceleration due to gravity on the surface of the asteroid?
Answers
Explanation:
The acceleration due to gravity on the surface of the asteroid is directly proportional to the mass of the asteroid and inversely proportional to the square of the distance from the center of the asteroid.
Therefore, it varies depending on the asteroid's size, shape, and composition.
What is acceleration?Acceleration is the rate of change of velocity over time. A change in velocity, which can be either a change in magnitude or direction or both, results in acceleration.
It is measured in units of meters per second squared (m/s²) or centimeters per second squared (cm/s²).
What is gravity?Gravity is a fundamental force in physics that exists between any two objects in the universe.
The force of gravity pulls all objects with mass toward each other.
Gravity's strength depends on the mass of the two objects and the distance between them.
What is an asteroid?An asteroid is a small rocky or metallic object in space that orbits the sun. They are usually composed of rock, metal, or a combination of the two.
They vary in size from a few meters to hundreds of kilometers in diameter.
Most asteroids are found in the asteroid belt between Mars and Jupiter, although some are also found in other regions of the solar system.
To know more about acceleration due to gravity :
https://brainly.com/question/30832668?
#SPJ11
An electrophoresis gel rests between two parallel plates; the potential difference between the plates is 58 V. Each second, 56 mC of charge moves through the gel.
What is the increase in thermal energy of the gel in 1.0 minute?
Answers
The increase in thermal energy of the gel in 1.0 minute is 194.88 J.
The electric current and potential difference are important concepts that can be used to calculate thermal energy in electrochemistry. The potential difference between two parallel plates of an electrophoresis gel is 58 V. Each second, 56 mC of charge moves through the gel. We have to find the increase in thermal energy of the gel in 1.0 minute.
The amount of charge moving in 1.0 minute is given by;
Q = I × t
Q = (56 × 10⁻³) × (60)
Q = 3.36 C
The amount of work done is given by;
W = V × Q
W = 58 × 3.36
W = 194.88 J
Heat produced = Work done
Q₁ = 194.88 J
The heat absorbed by the electrophoresis gel will lead to an increase in thermal energy, therefore the change in thermal energy of the gel is equal to the heat produced.Q₂ = Q₁
Q₂ = 194.88 J
Therefore, the increase in thermal energy of the electrophoresis gel is 194.88 J.
Learn more about Thermal energy:
https://brainly.com/question/19666326
#SPJ11
a TV set is pushed a distance of 2 m with a force of 20 N how much work is done on the set
Answers
Answer:
40 J
Explanation:
What happens to momentum when two objects collide
Answers
Answer:
The sum of momenta of each object before and after collision is equal . Thus when they collide , their momentum will change but its sum will be sane as the sum of the momentum before collision
Flexible cord sets and power-supply cords shall not be concealed behind building __________________, or run through doorways, windows, or similar openings.
Answers
Flexible cord sets and power-supply cords shall not be concealed behind building , structural ceilings, suspended or dropped ceilings, floors or walls, or run through doorways, windows, or similar openings.
Hence Option (b) All of these is correct
Flexible cord and flexible cable usage are now outlined in Section 400.10, while prohibited uses are listed in Section 400.12.
Note 5 under 400.12 now includes a new exclusion for flexible wires and cords (uses not permitted).
Flexible cables, flexible cord sets, and power supply cords are not permitted in areas that are "concealed by walls, floors, or ceilings or positioned above suspended or dropped ceilings," according to Note 5.
The following uses for flexible cables, flexible cord sets, and power supply cords are prohibited as well:
(1) As an alternative to a structure's fixed wiring.
(2) Run-through openings in structural ceilings, floors, suspended ceilings, or dropped ceilings.
(3) When run through windows, doorways, or comparable openings.
(4) If attached to building surfaces.
Hence, Option (b) All of these is correct .
Learn more about Flexible cords here https://brainly.com/question/3950810
#SPJ4
A vehicle starts from rest and accelerates uniformly for 12 seconds to a
velocity of 10ms1. It then runs at a constant velocity and is finally came to rest
in 66m with constant . The total distance covered by the vehicle is
580m. Find the value of acceleration and the time taken.
Answers
The value of the acceleration is 0.76 m/s² and the total time taken by the vehicle is 39 seconds.
Acceleration of the vehicleThe acceleration of the vehicle before coming to rest is calculated as follows;
v² = u² + 2as
where;
v is the final velocityu is the initial velocitya is the accelerations is the distance traveled before stoppingthe car came to rest with constant velocity attained after 12 seconds.
the initial velocity of the car before 12 seconds is zero.
v² = 0 + 2as
a = v²/2s
a = (10²)/(2 x 66)
a = 0.76 m/s²
Time of motion of the vehicled = ut + ¹/₂at²
where;
d is the total distance traveledt is the time of motiona is accelerationu is initial velocity of the vehicle580 = 0 + ¹/₂(0.76)t²
580 = 0.38t²
t² = 580/0.38
t² = 1,526.3
t = √1,526.3
t = 39 seconds
Thus, the value of the acceleration is 0.76 m/s² and the total time taken by the vehicle is 39 seconds.
Learn more about time of motion here: https://brainly.com/question/2364404
#SPJ1
How long will it take for a satellite to travel 45,000 m at a rate of 120 m/s? Enter your answer in the box below, without a unit
Answers
Hi there!
\(\large\boxed{375 sec}\)
Use the equation:
Distance / speed = time
We are given that the distance = 45,000 m and speed = 120 m/s, so plug these values into the equation to solve for time:
45,000 / 120 = 375 seconds.
When you mix pigments together, why does the resulting color always look darker?
Answers
Answer:
because you are not only mixing the colors u are also mix the colors in side the colors for example if u take pink red and white and mix it with green blue and yellow it will make it darling because if the inside colors
A gray kangaroo can bound across a flat stretch of ground with each jump carrying it 8.0 m from the takeoff point.
If the kangaroo leaves the ground at a 22˚ angle, what is its takeoff speed?
What is its horizontal speed?
Answers
The kangaroo's horizontal speed will be 9.7 m/s and its departure speed will indeed be 10.65 m/s.
What is the sound's velocity?By observing the pace at which this compressed region moves through the medium, we may determine the sound speed. The sound wave travels at a speed of around 343 meters per second in low humidity at 20 degrees Celsius.
Briefing:The following equation relates the distance to the direction and initial velocity:
d = [v₀²sin2θ]/g, where θ – the angle of the jump.
Thus, v₀² = gd / (sin2θ) = (9.8×8)/0.69 = 113.62
v₀ = 10.65 m/s ( the take off speed).
The horizontal velocity equals:
vₓ = v₀cos 22° = 10.65 m/s × 0.92 = 9.7 m/s
To know more about speed visit:
https://brainly.com/question/28224010
#SPJ1
ILL GIVE BRAINLIEST.
Ginny throws the Chaser up the air in a game of Quidditch with a velocity of 55 m/s. Assuming it has lost any magic and is not affected by air resistance, answer the following questions.
c) Assuming she is 10 meters off the ground when she throws it, with what velocity will it hit the ground?
Answers
States that if no external forces act on a group of objects, their total momentum does not change
Answers
Answer: this is true
Explanation:
if the object is moving and there is nothing stooping it, it will keep moving
A force F~ = Fx ˆı + Fy ˆ acts on a particle that
undergoes a displacement of ~s = sx ˆı + sy ˆ
where Fx = 10 N, Fy = −1 N, sx = 4 m, and
sy = 1 m.
Find the work done by the force on the
particle.
Answer in units of J.
Find the angle between F~ and ~s.
Answer in units of ◦
.
Answers
The work done by the force on the particle is 39J and the angle between F and s is 19.7 degree.
What is Force ?An item with mass is pulled or pushed which alters its velocity. A material that has the ability to change a body's rest or motion state is referred to as an external force. It possesses a magnitude and a direction.
Briefing:Force F = (Fx, Fy)
Displacement S = (Sx,Sy)
Fx=10N
Fy=-1N
Sx=4m
Sy=1m
F=(10,-1)N and S=(4,1)m
Work done is calculated by taking dot product of force and displacement vector:
W=F·S
W=10×4 + (-1)×1
W=40+(-1)=39J
W = 39 J
To find angle between F and s:
\(|F|=\sqrt{10^2+(-1)^2}\)
|F| = √101
|S| = √(4² + 1²)
|S| = √17
W = |F| |S| cosθ
39 = √101 √17 cosθ
θ = 19.7.
To know more about Force visit:
https://brainly.com/question/13191643
#SPJ1
two point masses are placed 10.0 cm apart and attract each other with a force of 10.0 n. find the force of gravitational attraction between the masses when they are placed 5.00 cm apart.
Answers
The final gravitational force after they are placed 5cm apart is 40 N.
We need to know about gravitational force to solve this problem. The gravitational force is the force caused by two masses objects. The magnitude of gravitational force can be determined as
F = G.m1.m2 / R²
where F is the gravitational force, G is the gravitational constant (6.674 × 10¯¹¹ Nm²/kg²), m1 and m2 are the mass of the object and R is the radius.
From the question above, we know that
Ra = 10 cm
Rb = 5 cm
Fa = 10 N
The gravitational force is inversely proportional to squared distance. Hence
Fa / Fb = Rb² / Ra²
10 / Fb = 5² / 10²
Fb = 40 N
For more on gravitational force at: https://brainly.com/question/19050897
#SPJ4
1 SELECT ALL THAT APPLY. Which of the following are definitions of diversity?
A The collective amount of differences among members within a social unit
B the mixture of races, genders, or religions that make up a group of people
C the recognition of historic inequalities that have kept some groups, particularly racial minorities, from having the same access to programs, financial resources, and jobs, as others have
D the representation of multiple groups of individuals with different identities and cultures within a group or organization
2 SELECT ALL THAT APPLY. How do group norms promote inclusion?
A They address conflicts productively.
B They promote collaborative work.
C They give group members an equal chance to voice their opinions.
D They are exclusive.
3 Match the description with the correct period of diversity workplace approaches/perspectives, as developed by Harvey.
an emphasis on the acceptance and celebration of differences
a time when the federal government passed a series of landmark equal employment opportunity laws
an emphasis on creating inclusive organizations
A Early years of diversity
B Diversity in 21st century
C Era of valuing diversity
4 Non-Millennials are less likely than Millennials to value the individual experiences of people, teams, and collaborations rather than issues of justness.
A True
B False
5 John’s company transfers him to a branch in a new city and state. John’s new coworkers are welcoming; they seem interested in him and ask for his opinions and suggestions. Although they are actively reaching out to John, they still give him personal space to adjust. What is this an example of?
A interpersonal inclusion
B intrapersonal inclusion
C Interpersonal Communication
D Personal Inclusion
please answer all 5 , thank you in advanced !
Answers
The collective amount of differences among members within a social unit
The representation of multiple groups of individuals with different identities and cultures within a group or organization
2) Norms that promote inclusion;They address conflicts productively.
They promote collaborative work.
They give group members an equal chance to voice their opinions.
What is diversity?We define diversity as that which makes the difference between individuals. We know that the society is filled up with people who are much more different from us and do hold values that are quite different from the values that we hold as individuals.
The term inclusion has to do with the process of making more and more people to be able to accept and embrace all other people and try to live in harmony with every other person without violence.
The matching of the terms are;
An emphasis on the acceptance and celebration of differences - Early years of diversity
A time when the federal government passed a series of landmark equal employment opportunity laws - Diversity in 21st century
An emphasis on creating inclusive organizations - Era of valuing diversity
It is true that non-Millennials are less likely than Millennials to value the individual experiences of people, teams, and collaborations rather than issues of justness.
The coworkers of John are practicing intrapersonal inclusion.
Learn more about inclusion:https://brainly.com/question/28080824
#SPJ1
You are preparing a performance review and have the following measurement at hand: pv = 300; ac = 200; and ev = 250. what is cpi of the project? group of answer choices 0.80 1.25 1.50 0.83
Answers
The correct option is (b) 1.25
The CPI of the project is 1.25. Earned Value (EV) is divided by Actual Cost (AC) to determine CPI.
CPI is calculated as follows: EV / AC. In this case, 250 / 200 = 1.25.
The CPI measures the effectiveness of project resources in relation to the project budget. Earned Value is divided by Planned Value to calculate SPI. SPI evaluates how well resources are performing in relation to the project schedule.The cost performance index (CPI) is a gauge of how closely the realized value of the job actually accomplished matches the costs really incurred: CPI = EV / AC. The actual progress (earned value) in comparison to the expected progress is measured by the schedule performance index (SPI) = EV / PVThe departure from the project's expected cost is measured using the CPI. SPI is the variance from the project's projected completion date. The project is over budget if the CPI is less than 1. Project is running late if SPI is less than 1.Learn more about the CPI and SPI with the help of the given link:
https://brainly.com/question/15178574
#SPJ4
Why should diameter of double walled tube must be big for a ice box
Answers
The diameter should of the double-walled tube be big for an ice box is increase the thermal temperature.
Double wall pipes are an important safety tool when storing liquids such as those used in the chemical wastewater food and beverage industries. The majority of jacketed piping applications are for chemical wastewater-contaminated groundwater and chemical process safety.
Tube wall thickness in excess of that required for internal stresses and known loads not only provides a margin of safety against unexpected loads but also increases survival time when corrosion or fatigue mechanisms are in action. increase. Single-layer tubing is lightweight, flexible, and can be installed quickly with less personnel and equipment. The double wall is a smooth inner double wall with a corrugated outer tube.
Learn more about Double-walled tubes here:-https://brainly.com/question/28014280
#SPJ9
a cylinder is connected in a regenerative circuit like you have seen in class and in the lab. if the system pressure relief valve is set at 1000 psi and the cylinder has a 2 square in. piston area and a 0.5 square in rod area, what is the maximum extension force that the cylinder could produce? group of answer choices 1500 lbf. 2000 lbf 500 lbf 1000 lbf
Answers
The maximum extension force that the cylinder could produce in a regenerative circuit is 2000 lbf.
Explanation:
To find the maximum extension force that the cylinder could produce when it is connected in a regenerative circuit, we need to consider the system pressure relief valve setting and the piston area.
Given:
- System pressure relief valve: 1000 psi
- Piston area: 2 square inches
- Rod area: 0.5 square inches (irrelevant for this problem)
Step 1: Calculate the maximum extension force using the formula: Force = Pressure × Area
Step 2: Substitute the values: Force = 1000 psi × 2 square inches
Step 3: Calculate the force: Force = 2000 lbf (pound-force)
So, the maximum extension force that the cylinder could produce in a regenerative circuit is 2000 lbf.
To know more about pressure visit:
https://brainly.com/question/12971272
#SPJ11
A spring has a force of 2.0N and an extension of 0.30m. What will the extension be if the force applied is 6 N.
Will mark as brainliest
Answers
Answer:
0.9 m
Explanation:
Hooke’s Law
\(\large\boxed{F = ke}\)
where:
F is the force in newtons (N).k is the 'spring constant' in newtons per metre (N/m).e is the extension in metres (m).Given values:
F = 2.0 Ne = 0.30 mSubstitute the given values into the formula to find k:
\(\implies 2.0=0.30k\)
\(\implies k=\dfrac{2.0}{0.30}\)
\(\implies k=\dfrac{20}{3}\; \sf N/m\)
To find the extension if the force applied is 6 N, substitute the found value of k and the given value of F into the formula and solve for e:
\(\implies 6=\dfrac{20}{3}e\)
\(\implies 18=20e\)
\(\implies e=\dfrac{18}{20}\)
\(\implies e=0.9\; \sf m\)
FOR 45 POINTS PLS ANSWER FAST
1. coefficient of friction
force that opposes a sliding object
2. drag
a force that resists motion
3. friction
friction between a solid and a liquid or gas
4. rolling friction
a force that develops when a mass is accelerated by gravity; stated as Fw = mg
5. sliding or kinetic friction
force that opposes a rolling object
6. starting or static friction
force that opposes the start of motion
7. weight
the ratio of the force necessary to move an object (or keep it moving) and the normal force
Answers
Answer:
Other than gravity, the most commonly encountered force is what or the force that resists motion.
friction
the ratio of the force necessary to move an object (or keep it moving) and the normal force
coefficient of friction
friction between a solid and a liquid or gas
drag
a force that resists motion
friction
the force that presses two surfaces together and is directed perpendicular to the contact surface; on a level surface, its magnitude is equal to the force of the object's weight but in the opposite direction
normal force
force that opposes a rolling object
rolling friction
force that opposes a sliding object
sliding or kinetic friction
force that opposes the start of motion
starting or static friction
a force that develops when a mass is accelerated by gravity; stated as Fw = mg
weight
Friction is a force that resists what
motion
It occurs when a surface in motion rubs against another what
surface
What acts parallel to the surfaces that are moving against one another and in the direction opposite to the direction of the motion (represented by F).
Friction
riction is caused by the interaction of the what or what of each object sliding over each other.
atom or molecules
he more contact the atoms are able to make, the greater the what
frictional effect
A what surface will produce more friction (resistance) than a smooth surface
rough surface
The high points on one surface interact with the high points on the other surface allowing atoms and molecules to form temporary what
intermolecular bonds
The more bonds that are allowed to form, the greater the what
friction
he force that opposes the start of motion is referred to as what
starting or static friction
This force is caused by the what that form between two surfaces
tiny bonds
The pull required to keep the block moving at a constant speed in the example above is due to what
sliding or kinetic friction
What occurs as tiny intermolecular bonds are constantly being formed and broken.
Sliding friction
Sliding friction is also affected by the weight of the object and another force called the what
normal force
What is the force of the contact surface pressing opposite the weight of the object, as seen in the diagram below.
normal force
The normal force is always perpendicular to the what
contact surface
The ratio between the sliding friction and the perpendicular normal force is called the what of sliding friction
coefficient
What is represented by the Greek letter mu, μ,
coefficient
he third type of friction that can exist between solid surfaces is what or the force that opposes a rolling object
rolling friction
Friction can also exist between what
solids liquids and gases
Gases and liquids, such as air and water, offer what
resistance to motion
the opposing force between a solid and a liquid or gas
drag
The gravitational force between two masses separated by a distance is F. The magnitudes of two masses are doubled and distance between them is reduced to half of the initial distance. The gravitational force between them will be:
[A] F
[B] 2F
[C] 4F
[D] 16F
Answers
Answer:
F = G M m / R^2
F1 = G M m / R1^2
F2 = 4 G M m / R2^2
F2 / F1 = 4 * (R1 / R2)^2 = 4 / (1/2)^2 = 16F2 = 16 F1
Talia is on a trip with some friends. In the first 2 hours , they travel 100 miles. Then they hit traffic and go only 30 miles in the next hour. The last hour of their trip , they drive 75 miles
Answers
Answer:
51 miles/hour
Explanation:
Talia is on a road trip with some friends. in the first 2 hours, they travel 100 miles. then they hit traffic and go only 30 miles in the next hour. the last hour of their trip, they drive 75 miles. calculate the average speed of talia’s car during the trip. give your answer to the nearest whole number.
The average speed would be 51 miles/hour.
The average speed of a moving object is defined as the total distance traveled relative to the total time taken fro the journey. Mathematically, it is given as:
total distance traveled/total time taken.
In this case;
Total distance traveled = 100 + 30 + 75 = 205 miles
Total time taken = 2 + 1 + 1 = 4 hours
Therefore;
Average speed = 205/4 = 51.25 miles/hour
To the nearest whole number = 51 miles/hour
which two criteria are least important for engineers to consider when developing a process to produce an important chemical
Answers
Answer:
Chemical engineering is a multi-disciplinary branch of engineering that combines natural and experimental sciences such as chemistry and physics, along with life sciences such as biology, microbiology and biochemistryplus mathematics and economics to design, develop, produce, transform, transport, operate
Explanation:
Answer:
A. the process needs to produce significant amounts of ammonia
C. the process needs to be able to be performed safely
Explanation:
a p e x
A sprinter leaves the starting blocks with an acceleration of 3.2 m/s2. What is the sprinter’s speed 5 seconds later? If the sprinter is 68 kg, with what force will the sprinter be accelerating
Answers
Answer:
46
Explanation:
Answer:
Refer the above attachment
HELPPP TIMED The etiology of somatoform disorders may consist of all of the following except __________ factors.
A.
personality
B.
biological
C.
cognitive
D.
environmental
Answers
Answer:
b. biologucal
Explanation:
it is b. biologucal
The etiology of somatoform disorders may consist of all the following except biological. Option B is correct.
What are the somatoform disorders?Somatoform disorder,is a mental health illness in which a person experiences physical symptoms as a result of psychological discomfort.
Family with a negative or anxious personality are more likely to acquire somatoform illnesses.
The etiology of somatoform disorders may consist of all the following except biological.
Hence,option B is correct.
To learn more about the somatoform disorders refer:
https://brainly.com/question/12164980
#SPJ2
Define pressure in short
Answers
Answer:
hope it helps......
Explanation:
Pressure, in the physical sciences, the perpendicular force per unit area, or the stress at a point within a confined fluid.
The spark plug of a motor bike does NOT work because the user did not use a torque wrench to tighten spark plug, instead he/she used a regular wrench. This is an example of? *
A. What is the RPN Number?
B. What are the potential Failure Modes?
C. What are the Potential Causes?
D. What are the Potential Effects?
Answers
This is an example of potential cause and effect. The potential cause is the improper use of tools, specifically using a regular wrench instead of a torque wrench to tighten the spark plug. The potential effect is the malfunctioning of the spark plug, leading to its failure to work properly.
Using the wrong tool, in this case, a regular wrench instead of a torque wrench, can lead to overtightening or undertightening of the spark plug. A torque wrench is specifically designed to apply a specific amount of torque or rotational force to tighten the spark plug to the manufacturer's specifications. Without using a torque wrench, it becomes challenging to achieve the correct tightness, which can result in a range of issues.
In the given scenario, the potential failure mode is the spark plug not functioning correctly, leading to the bike's engine not igniting properly. This can result in poor engine performance, misfires, or complete engine failure. Using the appropriate tools and following proper procedures is crucial to ensure the reliable and safe operation of mechanical components.
Learn more about rotational here:
https://brainly.com/question/3315764
#SPJ11
a sound bridge is a. a lightweight frame for quickly moving a microphone above the action while filming on location. b. boosting the volume of the music to make it more prominent than the voices or sound effects. c. transferring a sound from one channel to another in multichannel recording. d. overlapping the sound of one scene into the next.
Answers
A sound bridge is a d) overlapping the sound of one scene into the next
Sound bridging is an editing technique used to transition through sound from one scene to another. sound bridges, also known as audio bridges, allow filmmakers to enter and exit scenes by filling the gaps with audio. An audio bridge will connects two scenes, allowing the audio of the subsequent scene to play over the previous scene before showing the next shot. The technique used to accomplish this is known as J-cut.
There are different types of sound bridge namely
Dialogue sound bridgeSound effect sound bridgeMusic sound bridgeLearn more about the audios in
https://brainly.com/question/15546313
#SPJ4
how many different wavelengths of emitted light are emitted by those atoms as the electrons fall into
Answers
6 possible falls producing 6 wavelengths so the Correct option is C)
no. of radiation = \(^{4} C_2=\frac{4\times3}{2}\) =6
a wave's wavelength is the separation between two adjacent waves' corresponding points. Two points or particles that are in the same phase—i.e., points that have completed identical fractions of their periodic motion—are referred to as "corresponding points." Wavelength is typically measured from crest to crest or from trough to trough in transverse waves (waves with points vibrating at right angles to the direction of their advance); from compression to compression or from rarefaction to rarefaction in longitudinal waves (waves with points vibrating in the same direction as their advance).
6 possible falls producing 6 wavelengths
4 → 3, 4→2 , 4→1
3→2,3→1
2→1
Learn more about wavelength
brainly.com/question/13533093
#SPJ4
The density beyond which people cease to be nutritionally self-sufficient is called:________
Answers
Physiological nutrition is the density at which people are no longer self-sufficient in terms of nutrients.
How the body absorbs nutrients from food, how we get the energy we require, how we use nutrients, and how all of this relates to health and disease are all topics covered by nutrition physiology.
Why does physiology need nutrition?
Nutritional requirements exist in addition to daily energy requirements in order to keep the body from losing its own proteins, carbs, and lipids. Such molecules must be replenished frequently because they are constantly broken down.An organism uses food to prolong its life through some kind of biochemical and physiological process known as nutrition. It gives living organisms nourishment that can be transformed into energy and chemical building blocks.The ingestion of nourishment, meeting psychological needs, and bodily adjustment are the three purposes of food.To learn more about Physiological nutrition, visit:
https://brainly.com/question/4530723
#SPJ4