Extension of FOWLER type trailing edge lift augmentation devices, will produce:A) a nose-down pitching moment.B) a force which reduces drag.C) a nose-up pitching moment.D) no pitching moment.
Answers
The extension of FOWLER type trailing edge lift augmentation devices, which are used to increase lift and reduce drag on aircraft, will produce a nose-up pitching moment. This is because the extension of the flaps on the trailing edge of the wing increases the overall lift generated by the wing, which in turn causes the nose of the aircraft to rise.
Option C is correct answer
This nose-up pitching moment can be countered by adjusting the angle of attack of the aircraft or by adjusting the elevator trim.While the extension of these flaps does increase lift, it is important to note that it also increases drag. However, the increase in lift is usually more beneficial than the increase in drag, as it allows the aircraft to fly at slower speeds and with a steeper angle of descent during landing. Additionally, the reduction in speed and angle of descent can lead to a smoother landing and reduce the risk of damage to the aircraft.Overall, the extension of FOWLER type trailing edge lift augmentation devices will produce a nose-up pitching moment, but the benefits of increased lift usually outweigh the increased drag. Pilots must be aware of this pitching moment and take appropriate action to maintain control of the aircraft.For such more question on augmentation
https://brainly.com/question/31048387
#SPJ11
Related Questions
Discuss, in not less than 2000 words, how to ensure ethical, inclusive and equitable use of artificial intelligence software product in business.
Answers
Artificial intelligence (AI) technology is becoming a common feature in various industries such as healthcare, finance, retail, and manufacturing. With the growth of artificial intelligence comes the responsibility of ensuring ethical, inclusive and equitable use of the technology in businesses.
The question of how to ensure ethical, inclusive and equitable use of artificial intelligence software products in business is a critical one, and one that requires a thorough understanding of the technology and its impact on people, society and the environment. In this paper, we will discuss the measures that businesses can take to ensure ethical, inclusive and equitable use of artificial intelligence software products.
First, it is crucial for businesses to establish an ethical framework that guides the development, deployment and use of artificial intelligence software products. An ethical framework should outline the ethical principles that the business adheres to, such as transparency, accountability, fairness, privacy, and security. The framework should be developed in consultation with stakeholders such as customers, employees, shareholders, regulators, and civil society organizations. The framework should also be regularly reviewed and updated to reflect changes in the technology and the business environment.
Secondly, businesses should ensure that artificial intelligence software products are inclusive and equitable. This means that the products should be designed to cater to the needs of diverse groups of people, including those who are traditionally marginalized or underrepresented. The development team should include members from diverse backgrounds to ensure that the product is designed with a broad range of perspectives. Businesses should also ensure that the products are accessible to people with disabilities, such as those who are visually or hearing impaired.
Thirdly, businesses should be transparent about the use of artificial intelligence software products. This means that the products should be designed to be explainable and interpretable. Customers should be able to understand how the product works and how it makes decisions. Businesses should also be transparent about the data that is used to train the artificial intelligence models. The data should be collected ethically, and the use of the data should be in line with privacy regulations.
Fourthly, businesses should ensure that the use of artificial intelligence software products is fair and just. This means that the products should not be used to discriminate against any individual or group based on their race, gender, ethnicity, age, religion, sexual orientation, or any other characteristic. Businesses should also ensure that the products do not perpetuate existing biases in society. This can be achieved by regularly auditing the products and addressing any biases that are found.
Finally, businesses should be accountable for the use of artificial intelligence software products. This means that they should be held responsible for any harm that is caused by the product. The accountability should be enforced through regulatory frameworks and legal mechanisms. Businesses should also have internal mechanisms to monitor the use of the products and ensure that they are used in an ethical, inclusive and equitable manner.
In conclusion, ensuring ethical, inclusive and equitable use of artificial intelligence software products is essential for businesses that are using the technology. Businesses should establish an ethical framework, ensure that the products are inclusive and equitable, be transparent about the use of the products, ensure that the use of the products is fair and just, and be accountable for the use of the products. These measures will help to ensure that artificial intelligence software products are used in a way that benefits society and the environment while minimizing harm.
Learn more about Artificial intelligence here :-
https://brainly.com/question/33554219
#SPJ11
Need help to answer.
ASAP.
Air at a temperature of 150C passes through a heat exchanger at a velocity of 30 m/s where its temperature is raised to 8000C. It then enters a turbine with the same velocity of 30 m/s and expands until the temperature falls to 6500C. On leaving the turbine, the air is taken at a velocity of 60 m/s to a nozzle where it expands until the temperature falls to 5000C. If the air flow rate is 2 kg/s, calculate the following.
(i) Rate of heat transfer to the air in the heat exchanger,
(ii) Power output from the turbine assuming no heat loss, and
(iii) Velocity at exit from the nozzle, assuming no heat loss.
Take the enthalpy of air as h =cpt, where cp is the specific heat equal to 1. 005kJ/kg K and t is the temperature.
Answers
The power output from turbine assuming no heat loss and the velocity at exit from nozzle where Enthalphy h CpT i.e Cp specific heat = 1.005KJ/KgK.
What is meant by velocity?
Velocity is the direction speed of an item in motion as a measure of the rate at which its location is changing as seen from a certain point of view and as measured by a specific unit of time.A particle or object's movement with respect to time is expressed vectorially as velocity.As an alternative, the velocity magnitude can be expressed in centimetres per second (cm/s).Simply said, velocity is the rate of motion of an object in a specific direction. Using an automobile driving north on a highway as an example, or a rocket after it has launched, as an example of speed.The rate of flow of heat transfer to air exchanger i.e
\(w(h1+v^{2} 1/2+Z1g)+Q_{1-2} =w(h2+v2^{2} /2+Z1g)W_{1-2}\)
\(Wh_{1} +Q_{1-2} =Wh_{2}\)
\(Q_{1-2} =w(h_{1} -h_{2} )\)
\(Q_{1-2} =w_{cp} (t_{2} -t_{3} )\)
\(Q_{1-2}\) = 2xl.005(8000-150)
\(Q_{1-2}\) = 1577.8kgj/s
Velocity at exit from the nozzle, assuming no heat loss.
Given t₁ = 150°C, t₂ = 8000°c
V₁ = 30m/s, V₂ = 30m/s
t₃ = 6500°C , V₃ = 60m/s
\(W(v_{2} )^{2} /2+h_{2} )=Wh_{3} + (v3)^{2} /2+Wt\)
\((v2^{2}) -(v3^{2}) /2=(h2-h3)=Wt/w\)
\((30^{2} -60^{2} )x10^{-3} /2+(1.005)(8000-6500)=Wt/w\)
Wt = 1.506.15xw
Wt = 1506.15x2 = 3012.3kW
the enthalpy of air as h =cpt, where cp is the specific heat equal to 1. 005kJ/kg K and t is the temperature is 3012.3kW
To learn more about velocity refer to
https://brainly.com/question/25749514
#SPJ4
rank the following gases in order of decreasing rate of effusion. rank from the highest to lowest effusion rate. to rank items as equivalent, overlap them.
Answers
It means that the gas with the lowest molecular weight will have the highest effusion rate.
What has the highest rate of effusion?The given gases' effusion rates are listed in order from highest to lowest. The effusion rate of a hydrogen molecule is the highest, whereas that of a hydrocarbon is the lowest.
A gas will effuse faster when it is lighter and more slowly when it is heavier. Helium (He) will have the highest rate of effusion since it has the lowest molecular weight (atomic weight, in this example).
The following equation can be used to compare the rate of effusion for two gases: The effusion rates in this case are inversely related to the square root of the gas molecules' masses. A container contains an amalgam of neon and argon gas.
To learn more about rate of effusion is refer to:
https://brainly.com/question/28747259
#SPJ4
What does it mean to say that PEER is a data-driven, consumer-centric, and comprehensive system?
Answers
Answer:
PEER establishes clear performance metrics, it serves consumer needs, and it covers all aspects of energy system performance.
Explanation:
on edg. just did it
On a day in which the local atmospheric pressure is 99.5 kPa, answer each of the following: (a) Calculate the column height of mercury in a mercury barometer in units of meters, feet, and inches. (b) Francis is concerned about mercury poisoning, so he builds a water barometer to replace the mercury barometer. Calculate the column height of water in the water barometer in units of meters, feet, and inches. (c) Explain why a water barometer is not very practical. (d) Ignoring the practicality issue, which of the two (mercury or water) would be more precise
Answers
Answer:
C . . . . . . . . . . . . . . . . . . . . . .
(a) The column height of mercury in a mercury barometer is 7.32 meters, or 24.0 feet, or 95.2 inches.
What is the column height?(b) The column height of water in a water barometer is 995 meters, or 3268 feet, or 33.9 feet.
(c) A water barometer is not very practical because it would need to be very tall to measure atmospheric pressure.
(d) Ignoring the practicality issue, a mercury barometer would be more precise because mercury is denser than water.
Mercury barometer: 7.32 m, 24 ft, 95.2 in
Water barometer: 995 m, 3268 ft, 33.9 ft
Water barometer not practical because it would be too tall
Mercury barometer more precise because mercury is denser
Read more about barometer here:
https://brainly.com/question/11904913
#SPJ2
The cross section of a river may be idealized as shown below. Find the discharge carried by the river if S=2*10-4 for all sections. The side slope at both sides is 1:1
Answers
Answer:
Explanation:
To find the discharge carried by the river, we need to use the cross-sectional area of the river and the velocity of the water. The cross-sectional area can be found by integrating the width of the river across the depth.If the side slope of the river is 1:1, that means that for every 1 meter of horizontal distance from the centerline, the depth of the water decreases by 1 meter. Using this information, we can set up the following integral to find the cross-sectional area:A = ∫[0,b] (b - x) dxWhere b is the width of the river at the base, and x is the distance from the centerline.Solving this integral, we find that the cross-sectional area is:A = (b^2)/2Now that we have the cross-sectional area, we can use the equation for discharge:Q = VAWhere Q is the discharge, V is the velocity of the water, and A is the cross-sectional area. If S is equal to 210^-4 for all sections, that means that the slope of the river is 210^-4. The velocity of the water can be found using the equation:V = √(SgD)Where S is the slope of the river, g is the acceleration due to gravity (9.81 m/s^2), and D is the depth of the water.If we plug in the values for S, g, and D, we can find the velocity of the water and then use the equation for discharge to find the total discharge carried by the river.For example, if the width of the river at the base is 10 meters and the depth of the water is 5 meters, the cross-sectional area would be:A = (10^2)/2 = 50 m^2The velocity of the water would be:V = √(2*10^-4 * 9.81 * 5) = 1.99 m/sAnd the discharge would be:Q = VA = 50 m^2 * 1.99 m/s = 99.5 m^3/sThis is the total discharge carried by the river.
8.
Galileo proposed the heliocentric model of the solar system.
a. True
b. False
Answers
Answer: B the first person to propose the heliocentric model of the solar system was Nicolaus Copernicus
Explanation:
Question 2
Salt in crude oil must be removed before the oil undergoes processi
fed to a washing unit where fresh water fed to the unit mixes with t
the sal contained in the oil. The oil (containing salt but no water), be
can be removed at the top of the washer. If the "spent" wash water
oil contains 5% salt, determine the concentration of the salt in the w
crude oil (with salt) to water used is 4:1.
Answers
The concentration of the salt in the w crude oil (with salt) to water used is 4:1 is 0.0061.
What is crude oil?
Crude oil is a hydrocarbon mixture that exists in liquid form in natural subterranean reservoirs and stays liquid at atmospheric pressure after passing through surface separation facilities.
The salt content of "spent" wash water is 15%.
5% of crude oil is salt.
The crude oil (with salt) to water ratio utilised is 4: 1.
Crude oil fraction:
95% of crude oil = 0.95
0.95F1 = x1E1
0.95(100) = x1E1
95= x1E1
E1 = 95/X1
wash water fraction:
15% of wash water = 100% -15% = 85%
= F2 = 0.85E2
salts fraction:
0.05F1 = (1-X1)E1 + 0.15E2
0.05F1 = (1-X)95/X1 + 0.15(F2/0.85)
0.05F1 = 95/X1 - 95 + 0.15(F2/0.85) (SINCE = 95.588 = 95/X1 = 99.38)
0.05(100) = 95/X1 - 95 + 17.61(1/4F1)
5 = 95/X1 - 95 + 4.41
Fraction of salts = 1- X1 = 0.0061
To learn more about crude oil
https://brainly.com/question/14260176
#SPJ13
due at 11:59pm please help
Which of the items shown in the photo were developed using engineering design processes to develop a solution to a problem?
A. computer
B. coffee cup
C. table
D. pen
An engineer proposes that a newly developed chemical could be sprayed from aircraft to slow the rate of burning in a forest fire. What is the next step the engineer is likely to take to develop a solution to fighting forest fires?
A. test a number of similar chemicals
B. spray and compare the effectiveness of each tested chemical to water.
C. add the chemical to all aircraft spray tanks.
D. design a spray system for the chemical.
Answers
x cotx expansion using maclaurins theorem.
Answers
It is to be noted that it is impossible to find the Maclaurin Expansion for F(x) = cotx.
What is Maclaurin Expansion?The Maclaurin Expansion is a Taylor series that has been expanded around the reference point zero and has the formula f(x)=f(0)+f′. (0) 1! x+f″ (0) 2! x2+⋯+f[n](0)n!
What is the explanation for the above?
as indicated above, the Maclaurin infinite series expansion is given as:
F(x)=f(0)+f′. (0) 1! x+f″ (0) 2! x2+⋯+f[n](0)n!
If F(0) = Cot 0
F(0) = ∝ = 1/0
This is not definitive,
Hence, it is impossible to find the Maclaurin infinite series expansion for F(x) = cotx.
Learn more about Maclaurin Expansion at;
https://brainly.com/question/7846182
#SPJ1
Look at the following situation and write a short email requesting help.
You bought 2 cartridges for your printer online, but when they arrive you notice that the best before date on them has already passed. Write and ask for replacements to be sent
Answers
To write a formal letter it is necessary to take the following aspects into account, to whom it is addressed, the date, the reason, and thanks.
An ink cartridge is a replaceable assembly of a printer that contains the ink and print head itself that projects the ink onto the paper during printing.
A suitable email to request the change of cartridges for ones that have not expired would be:
Monday 1st November, 2021
ABC Printer Company
Printer Cartridge Department.
I write this email to request you resend two cartridges for my printer because in recent days I made the purchase of them through the website and the cartridges that arrived at my house were expired according to the date indicated on their label.
I send the proof of purchase and my information so that the cartridges can be sent to me again.
William Simpson
6th Avenue, Park Tower Building
Apartment 615
Thanks.
Learn more in: https://brainly.com/question/14491478
1. A saturated soil with a mass of 43.2gr. When dried in the oven its mass was 30gr. The volume of the wet sample is 20 cm3 and the dry sample is 12 cm3. Find the limit of contraction.
2. The unit weight of a saturated soil is 2010 kg/m3, if its Gs = 2.74, determine the dry unit weight(γus), e, n and Moisture content (w (%)).
Please do not do it directly but put formulas also to see the steps.
Answers
A saturated soil with a mass of 43.2g. When dried in the oven its mass was 30g, the limit of contraction is 0.4.
For the limit of contraction, we know that:
Limit of contraction (Lc) = (Vw - Vd) / Vw
Lc = (20 - 12) / 20
Lc = 8 / 20
Lc = 0.4
Therefore, the limit of contraction is 0.4.
Now for the dry weight,
Dry unit weight (γd) = γw / (1 + e)
e = (Gs - 1) / Gs
n = e / (1 + e)
w = (wet weight - dry weight) / dry weight
In this case,
γw = 9.81 kN/\(m^3\)
Gs = 2.74.
So,
γd = 2010 / (1 + ((2.74 - 1) / 2.74))
γd = 2010 / (1 + 0.727)
γd = 2010 / 1.727
γd = 1163.54 kg/m^3
e = (2.74 - 1) / 2.74
e = 1.74 / 2.74
e ≈ 0.635
n = 0.635 / (1 + 0.635)
n = 0.635 / 1.635
n ≈ 0.388
w = (43.2 - 30) / 30
w = 13.2 / 30
w ≈ 0.44
Therefore, the dry unit weight (γd) is approximately 1163.54 kg/m^3, the void ratio (e) is approximately 0.635, the porosity (n) is approximately 0.388, and the moisture content (w) is approximately 0.44.
For more details regarding dry weight, visit:
https://brainly.com/question/31240478
#SPJ4
who ever answers this gets 25 NON COSTLY points
Answers
Answer:
"cool"
Explanation:
you have a set of plans that require lighting fixtures (luminaires) to be installed on the celling directly above an indoor pool. the ceiling hight is 10 feet above the decking around the pool. you should make sure that these fixtures are
Answers
The lighting fixtures should be waterproof and properly sealed.
What are the essential requirements for the lighting fixtures above the indoor pool?Lighting fixtures installed above an indoor pool need to meet specific criteria to ensure safety and durability. These fixtures should be designed specifically for wet or damp environments and be rated as waterproof.
Water can create a hazardous situation if it comes into contact with electrical components, so the fixtures must have appropriate seals to prevent water ingress. Additionally, it's crucial to choose fixtures that are corrosion-resistant to withstand the humid environment around the pool.
The requirements for lighting fixtures in wet environments to ensure safety and longevity. Waterproofing and proper sealing are crucial to protect against electrical hazards and ensure the fixtures can withstand the pool's surroundings.
Learn me about Lighting fixtures
brainly.com/question/14924764
#SPJ11
The boost converter of Fig. 6-8 has parameter Vs 20 V, D 0.6, R 12.5 , L 10 H, C 40 F, and the switching frequency is 200 kHz. (a) Determine the output voltage. (b) Determine the average, maximum, and minimum inductor currents. (c) Determine the output voltage ripple. (d) Determine the average current in the diode. Assume ideal components.
Answers
Answer:
a) the output voltage is 50 V
b)
- the average inductor current is 10 A
- the maximum inductor current is 13 A
- the maximum inductor current is 7 A
c) the output voltage ripple is 0.006 or 0.6%V₀
d) the average current in the diode under ideal components is 4 A
Explanation:
Given the data in the question;
a) the output voltage
V₀ = V\(_s\)/( 1 - D )
given that; V\(_s\) = 20 V, D = 0.6
we substitute
V₀ = 20 / ( 1 - 0.6 )
V₀ = 20 / 0.4
V₀ = 50 V
Therefore, the output voltage is 50 V
b)
- the average inductor current
\(I_L\) = V\(_s\) / ( 1 - D )²R
given that R = 12.5 Ω, V\(_s\) = 20 V, D = 0.6
we substitute
\(I_L\) = 20 / (( 1 - 0.6 )² × 12.5)
\(I_L\) = 20 / (( 0.4)² × 12.5)
\(I_L\) = 20 / ( 0.16 × 12.5 )
\(I_L\) = 20 / 2
\(I_L\) = 10 A
Therefore, the average inductor current is 10 A
- the maximum inductor current
\(I_{Lmax\) = [V\(_s\) / ( 1 - D )²R] + [ V
given that, R = 12.5 Ω, V\(_s\) = 20 V, D = 0.6, L = 10 μH, T = 1/200 kHz = 5 hz
we substitute
\(I_{Lmax\) = [20 / (( 1 - 0.6 )² × 12.5)] + [ (20 × 0.6 × 5) / (2 × 10) ]
\(I_{Lmax\) = [20 / 2 ] + [ 60 / 20 ]
\(I_{Lmax\) = 10 + 3
\(I_{Lmax\) = 13 A
Therefore, the maximum inductor current is 13 A
- The minimum inductor current
\(I_{Lmax\) = [V\(_s\) / ( 1 - D )²R] - [ V
given that, R = 12.5 Ω, V\(_s\) = 20 V, D = 0.6, L = 10 μH, T = 1/200 kHz = 5 hz
we substitute
\(I_{Lmin\) = [20 / (( 1 - 0.6 )² × 12.5)] - [ (20 × 0.6 × 5) / (2 × 10) ]
\(I_{Lmin\) = [20 / 2 ] -[ 60 / 20 ]
\(I_{Lmin\) = 10 - 3
\(I_{Lmin\) = 7 A
Therefore, the maximum inductor current is 7 A
c) the output voltage ripple
ΔV₀/V₀ = D/RCf
given that; R = 12.5 Ω, C = 40 μF = 40 × 10⁻⁶ F, D = 0.6, f = 200 Khz = 2 × 10⁵ Hz
we substitute
ΔV₀/V₀ = 0.6 / (12.5 × (40 × 10⁻⁶) × (2 × 10⁵) )
ΔV₀/V₀ = 0.6 / 100
ΔV₀/V₀ = 0.006 or 0.6%V₀
Therefore, the output voltage ripple is 0.006 or 0.6%V₀
d) the average current in the diode under ideal components;
under ideal components; diode current = output current
hence the diode current will be;
\(I_D\) = V₀/R
as V₀ = 50 V and R = 12.5 Ω
we substitute
\(I_D\) = 50 / 12.5
\(I_D\) = 4 A
Therefore, the average current in the diode under ideal components is 4 A
intersections that have traffic signs or signals are called: signal stops non-traditional intersections uncontrolled intersections controlled intersections submit answer
Answers
Intersections that have traffic signs or signals are called uncontrolled intersections.
What is signals?
Signals are forms of communication used by living organisms and machines. They are the means by which messages are exchanged between two or more entities. Signals can be visual, auditory, chemical, electrical, and mechanical. They are used to convey information, instructions, and other data. In the context of computing, signals are the messages a computer sends and receives from external sources. Signals can be used to control the flow of data, detect errors, and initiate events. Signals can be used to send information from one unit to another, or from one system to another. Signals can also be used to control the operation of a system or device, or to alert an operator of an error or malfunction. Signals are an important part of communication and are used to transmit data, instructions, and other information between machines and living beings.
To learn more about signals
https://brainly.com/question/17279618
#SPJ4
which systems engineering support discipline has the goal to ensure that support considerations are an integral part of the system design requirements so that the system can be cost-effectively supported throughout its life cycle
Answers
Answer:what's the question
Explanation:
Which component of structural firefighting protective clothing is critical for protecting the body from steam burns?
Answers
The moisture barrier is typically made from specialized materials such as PTFE (polytetrafluoroethylene) or ePTFE (expanded polytetrafluoroethylene).
The moisture barrier is a key layer within the structure of the protective clothing that is designed to prevent water, steam, and other liquids from penetrating through to the firefighter's skin. It acts as a barrier against heat and moisture, providing essential protection against steam burns. The moisture barrier is an integral part of structural firefighting protective clothing and works in conjunction with other layers, such as the outer shell and thermal barrier, to provide comprehensive protection against various hazards encountered in firefighting situations.
In conclusion, the moisture barrier is a critical component of structural firefighting protective clothing as it effectively protects the body from steam burns. Its specialized design and materials create a barrier that prevents the entry of steam and hot water, ensuring the safety and well-being of firefighters in high-temperature and high-moisture environments.
Learn more about moisture barrier: https://brainly.com/question/18069199
#SPJ11
Let's say there's an object floating in liquid. The depth of the object below the surface is and its height above the water is ℎ. The density of the ball is and the density of the liquid is . The pressure above the water is .
I understand this situation when only the density of the ball matters; you integrate to get P(z) = + C, and given the initial condition P(d) = . (pressure at water-air interface is atmospheric), C = . - , so P(z) = + - .
What I am confused about is how to find the pressure given the influence of the density of the liquid. I don't really understand why or how the density of the liquid affects the equation for pressure at all, besides that in order for the object to be floating, < . It seems like since you're only interested in the ball, so the only distance that matters is the distance of the ball under the water, and the only density relevant there would be the one of the ball. Or do you take the ratio of the densities? Is it their difference? Why does the liquid matter at all?
Answers
The density of the liquid does affect the equation for pressure when an object is floating in it.
When an object is floating in a liquid, it experiences two forces: buoyancy and gravity. Buoyancy is the force that acts on the object in the opposite direction of gravity and is proportional to the density of the liquid.
The pressure at any point in a fluid is given by the weight of the fluid above that point. The weight of the fluid depends on the density of the fluid. Therefore, the density of the liquid affects the pressure at any given point in the fluid.
In the case of the floating object, the buoyant force is equal to the weight of the fluid displaced by the object. The weight of the fluid displaced depends on the density of the liquid. Therefore, the buoyant force and the weight of the object both depend on the density of the liquid.
To calculate the pressure at any point in the fluid, including the point where the object is located, we need to take into account the density of the liquid. This can be done by using the hydrostatic equation, which relates the pressure at any point in a fluid to the depth and density of the fluid.
In summary, the density of the liquid affects the pressure at any point in the fluid, including the point where the object is located. This is because the buoyant force and weight of the object both depend on the density of the liquid. The hydrostatic equation can be used to calculate the pressure at any point in the fluid, taking into account the density of the fluid.
Learn more about hydrostatic equation: https://brainly.com/question/30409992
#SPJ11
which of the following environmentalists did not use civil disobedience as a tactic? group of answer choices a. judi bari b. rachel carson c. cesar chavez d. dolores huerta
Answers
Among the following environmentalists, Rachel Carson did not use civil disobedience as a tactic. Civil disobedience is a strategy that involves breaking laws, rules, and regulations to draw attention to an unjust law, rules, or regulation, and to force the issue into the public spotlight.
Civil disobedience is a form of peaceful resistance, and those who engage in it risk being arrested, charged with a crime, or jailed. Some environmentalists have used civil disobedience as a tool to raise awareness about environmental issues and injustices. Judi Bari, Cesar Chavez, and Dolores Huerta are examples of environmentalists who have used civil disobedience as a tactic to draw attention to the cause.
Rachel Carson, on the other hand, did not use civil disobedience as a tactic. She was a marine biologist and conservationist who is best known for her book "Silent Spring," which exposed the harmful effects of pesticides on the environment and sparked the modern environmental movement. Carson's approach was to educate people about the dangers of pesticides and to advocate for changes in government policy rather than to break laws to draw attention to the issue.
Learn more about civil disobedience
https://brainly.com/question/30696397
#SPJ11
How many 10" diameter circles can be cut from a semicircular shape that has a 20"
diameter and a flat-side length of 25"?
Answers
9514 1404 393
Answer:
1
Explanation:
Only one such circle can be drawn. The diameter of the 10" circle will be a radius of the semicircle. In order for the 10" circle to be wholly contained, the flat side of the semicircle must be tangent to the 10" circle. There is only one position in the figure where that can happen. (see attached).
Answer:
1The diameter measurement of a semi circle having a measure of 10" diameter , 20" diameter and a length of 25.Kevin fixes trucks as a job. The engine is oily. Which set set of equipment should Kevin use to fix the truck?
Answers
Answer:
A hammer and a wrench
Explanation:
An estimate of the amount of work accomplished is the:
variation
relative intensity
volume load
specificity
Answers
The estimate of the amount of work accomplished is called volume load.
Volume load refers to the total amount of weight lifted in a workout session. It takes into account the number of sets, the number of repetitions, and the weight used. Volume load can be used as a measure of the amount of work accomplished. Volume load is also used to monitor progress over time.
In conclusion, the estimate of the amount of work accomplished is called volume load. Volume load is a measure of the amount of work done in a workout session. It can be used to monitor progress over time.
To know more about work visit:
brainly.com/question/18094932
#SPJ11
"All data types are keywords but all keywords are not data types", justify this statement.
Answers
Keywords Are Reserved Words Which Are Not Use As Normal Cases But Used For Special Purpose In Our Program whereas, Data Type Tells The Compiler And Interpreter How The Program Is Going To Be Executed And Can Be Used At Every Cases.
Hope This Helps You ❤️Based on how they are stored in the computer, the types produced by these keywords can be categorized into two families, integer types and floating-point types.
What is the relation between data and keyword?Bit, byte, and word are terminology that can be used to refer to either memory or data storage units in computers.
The main distinction between text fields and keyword fields is that text fields are examined during indexing, whereas keyword fields are not.
This means that while keyword fields are indexed exactly as is, text fields are split down into their constituent phrases at indexing to allow for partial matching.
A word or collection of words that an Internet user enters into a search engine or search bar to conduct a search is referred to as a keyword in the context of digital marketing.
Therefore, All data types are keywords, but all keywords are not data types.
Learn more about data and keywords here:
https://brainly.com/question/9588905
#SPJ2
the most notable aspect in managing C/N for downlink designs is
Answers
Answer:
Explanation:
In satellite communications, downlink is the establishment of a communications link from an orbiting satellite down to one or more ground stations on Earth. Contrast with uplink.
the Library of Muyinga's building construction was related to the product life cycles, water cycles and energy cycles, what does this mean?
Answers
The Library of Muyinga's building construction was related to the product water cycle. Thus, option B is correct.
What is water cycle?It is also known as the hydrological cycle and is basically all about water evaporating from liquid masses such as lakes, seas, oceans, and rivers, being water vapor in the air, and then falling back down in the form of rain or snow or similar things.
Sometimes they fall nearby, sometimes it gets carried to other regions due to winds.The cycle in hich water is changed and distributed to other areas is called water cycle.
Therefore, The Library of Muyinga's building construction was related to the product water cycle. Thus, option B is correct.
Learn more about Library on:
https://brainly.com/question/14006268
#SPJ1
List 5 cutting actions of sawing machines
pls help
Answers
Thin metal blades or flexible bands with teeth on one edge, thin grinding wheels, or thin metal disks with teeth on their edges can all be used as sawing machine cutting tools.
What is sawing machine?Sawing machine is defined as a device for cutting forms out of raw material plates or cutting apart bars of material. It is used to sever material, usually wood, but occasionally metal or stone. The material is cut by pressing the toothed edge against it and pushing it swiftly forward, slowly backward, or continually forward.
Rotating blades, reciprocating blades, and circulating blades are the three basic types of power sawing machines.
Thus, thin metal blades or flexible bands with teeth on one edge, thin grinding wheels, or thin metal disks with teeth on their edges can all be used as sawing machine cutting tools.
To learn more about sawing machine, refer to the link below:
https://brainly.com/question/366955
#SPJ1
Select the option below that contains the correct order or sequence of events. A) 1) Add host to subscription, 2) Use host as report source, 3) Scan hostB) 1) Use host as report source, 2) Add host to subscription, 3) Scan hostC) 1) Add host to subscription, 2) Scan host, 3) Use host as report sourceD) 1) Scan host, 2) Add host to subscription, 3) Use host as report source
Answers
The option that has the correct order or sequence of events are;
1) Scan host.
2) Add host to subscription.
3) Use host as report source.
What are host assets?Host assets are known to be a kind of IP addresses in a person's account. This type of assets is one that can be used as a kind of scan, map and also to report targets.
A person can view the hosts in their account by going the Assets panel to the Host Assets. One can add new hosts by the use of the New menu. The person can also only carry out actions like scanning, mapping and reporting on one's hosts.
Learn more about IP addresses from
https://brainly.com/question/24930846
The strategies to meet the indoor air quality credit requirements reflect the ___ category knowledge domain of indoor air quality.
Answers
The strategies to meet the indoor air-quality credit requirements reflect the management category knowledge domain of indoor air quality.
Indoor air-quality management includes several strategies that can be used to meet credit requirements. The following are some of the strategies that can be used to improve indoor air quality in buildings:
Develop an Indoor Air Quality Management Plan: This plan should include specific goals and procedures for maintaining and improving indoor air quality. It should include a regular inspection and maintenance schedule for ventilation systems, air filters, and other indoor air quality features.Air filtration: Clean and filter the air in the building by using effective filters. Filters should be regularly cleaned or replaced to ensure their effectiveness.Ventilation: Ensure adequate ventilation in the building by increasing the amount of outdoor air entering the building or by using mechanical ventilation systems. These systems should be regularly inspected and maintained.Cleaning: Regular cleaning and maintenance of the building can help to reduce indoor air pollutants. Use environmentally friendly cleaning products and practices when possible, and ensure that cleaning staff is properly trained on best practices.Monitoring: Regularly monitor indoor air-quality in the building to ensure that levels of pollutants are kept at a minimum. Monitoring should be done by a qualified professional using appropriate equipment.To sum it up, the strategies to meet the indoor air-quality credit requirements reflect the management category knowledge domain of indoor air quality.
To learn more about air-quality:
https://brainly.com/question/1211889
#SPJ11
Which technical practice incorporates build-time identification of security vulnerabilities in the code?
Answers
Technical practice incorporates build-time identification of security vulnerabilities in the code is Penetration testing.
What is Penetrating Testing?A penetration test, sometimes referred to as a pen test or ethical hacking, is a legitimate simulated cyberattack on a computer system that is carried out to analyze the system's security. This is distinct from a vulnerability assessment.
In order to identify and illustrate the financial effects of a system's vulnerabilities, penetration testers employ the same tools, strategies, and procedures as attackers. Reconnaissance, scanning, vulnerability assessment, exploitation, and reporting are the five stages of a penetration test.
Penetration testing is a technical activity that includes build-time discovery of security vulnerabilities in the code.
Penetration tests are essential to an organization's security because they teach staff members how to respond to any kind of intrusion from a malicious party. Pen tests are a method of determining whether a company's security procedures are actually effective.
To learn more about Penetrating Testing, refer to:
https://brainly.com/question/26555003
#SPJ4