Exercise Objectives ✓ Working with arrays. Problem Description • Occurrences of an element in an array. Problem Description Open Code Block IDE, create a new project. Use this project to: o Create a recursive function that returns the number of occurrences of an element in an array. o In the main function define an array of size 50, fill the array with random numbers in the range [10, 20), check the occurrence of a number between 10 to 20.
Answers
To solve the problem of counting the occurrences of an element in an array, we can create a recursive function.
In this case, we'll define a recursive function that takes an array, a target element, and the current index as parameters. The function will compare the target element with the element at the current index and recursively call itself with an updated index. In the main function, we'll define an array of size 50 and fill it with random numbers in the range [10, 20). Then, we can call our recursive function to check the occurrence of a specific number within the range of 10 to 20 Here's an example implementation:
```python
import random
def count_occurrences(arr, target, index):
if index == len(arr):
return 0
elif arr[index] == target:
return 1 + count_occurrences(arr, target, index + 1)
else:
return count_occurrences(arr, target, index + 1)
def main():
arr = [random.randint(10, 19) for _ in range(50)]
target = random.randint(10, 19)
occurrences = count_occurrences(arr, target, 0)
print(f"The number {target} occurs {occurrences} times in the array.")
main()
```
In the `count_occurrences` function, we have three base cases: - If the index reaches the end of the array (`index == len(arr)`), we return 0. - If the element at the current index matches the target element (`arr[index] == target`), we increment the count by 1 and call the function recursively with the next index (`index + 1`). - If neither of the above conditions is met, we simply call the function recursively with the next index. In the `main` function, we generate an array of random numbers between 10 and 19 using a list comprehension.
Learn more about the main function here:
https://brainly.com/question/22844219
#SPJ11
Related Questions
Create an array of 10 size and assign 10 random numbers. Now find the sum of the array using for and while loop.
Answers
Answer:
10
Explanation:
A helicopter landing pad is to be constructed over an area of 40 ft by 70 ft. It is to be 2 ft thick. How many cubic feet must be ordered?
Answers
The volume of cuboid in cubic feet which must be ordered is equal to 5,600 cubic feet.
Given the following data:
Length of helicopter landing pad = 40 ft.
Width of helicopter landing pad = 70 ft.
Height or thickness of helicopter landing pad = 2 ft.
How to calculate the volume of a geometric figure?Based on the information provided, we can reasonably infer and logically deduce that the shape of this helicopter landing pad is a cuboid.
Mathematically, the volume of a cuboid can be calculated by using this following formula:
Volume = l × w × h
Where:
l represents the length of a cuboid.w represents the width of a cuboid.h represents the height of a cuboid.Substituting the given parameters into the formula, we have;
Volume = 40 × 70 × 2
Volume = 5,600 cubic feet.
Read more on volume of a cuboid here: https://brainly.com/question/24919497
#SPJ1
ne advantage of cmos logic is its low power dissipation. p2.2 consider the drain currents i d1 and id2 flowing in the transistors m1 and m2. assuming there is no load on vcomp , what are the approximate drain currents when vclk is high? when vclk is low? when does a significant amount of drain current flow?
Answers
When voltage indicator, VCLK, alters from high to low or vice versa in a transistor, a huge amount of drain current streams through the conductor.
Advantage of cmos logicAlthough, during the transition state, there could be a noticeable sum of energy dissipation due to the sizeable crowbar current.
CMOS logic systems possess an superiority when it comes to resembling low power consumption as they consume paltry energy when the transistors are in a constant condition i.e., when VCLK is either high or low.
Learn more about voltage on
https://brainly.com/question/1176850
#SPJ4
A Contractor Has A Job Which Should Be Completed In 100 Days. At Present, He Has 80 Men On The Job And It Is Estimated That They Will Finish The Work In 130 Days. Of The 80 Men, 50 Are Each Paid ₱120.00 A Day, 25 At ₱180.00 A Day, And 5 At ₱250.00 A Day. For Each Day Beyond The Original 100 Days, A Contractor Has To Pay ₱500.00 Liquidated Damages.A) How Many
A contractor has a job which should be completed in 100 days. At present, he has 80 men on the job and it is estimated that they will finish the work in 130 days. Of the 80 men, 50 are each paid ₱120.00 a day, 25 at ₱180.00 a day, and 5 at ₱250.00 a day. For each day beyond the original 100 days, a contractor has to pay ₱500.00 liquidated damages.
a) How many more men should the contactor add so that he would complete the work on time?
b) If of the additional men, 2 are paid ₱180.00 a day, and the rest at ₱120.00 a day, would the contractor save money by employing more men and not paying the fine?
Answers
A contractor has a job that should be completed in 100 days. At present, he has 80 men on the job and it is estimated that they will finish the work in 130 days. Of the 80 men, 50 are each paid ₱120.00 a day, 25 at ₱180.00 a day, and 5 at ₱250.00 a day. For each day beyond the original 100 days, a contractor has to pay ₱500.00.
liquidated damages.(a) How many more men should the contractor add so that he would complete the work on time?In the first case, we see that the contractor already has 80 men and they are working for 130 days to complete the job. So, we can use the following formula to determine the additional number of workers required to finish the work in 100 days.
b) If of the additional men, 2 are paid ₱180.00 a day, and the rest at ₱120.00 a day, would the contractor save money by employing more men and not paying the fine Let’s assume that the contractor adds 440 workers, of which 2 are paid ₱180.00 a day and the rest are paid ₱120.00 a day.
The total cost of the new workers is, therefore, ₱9600.00 + ₱4500.00 + ₱49800.00 = ₱63,900.00.The cost of liquidated damages would be calculated as follows: $$LD = (130-100) \cdot 500 = ₱15,000.00$$.
Therefore, the contractor would save money if he employs more men and not pays the fine. The contractor’s savings would be:$$Savings = LD - Additional cost$$$$= 15000.00 - 63900.00 $$$$= -48900.00$$
Thus, we can see that the contractor would save ₱48,900.00 by employing more men and not paying the fine.
To know more about contractor visit:
https://brainly.com/question/31457618
#SPJ11
Develop a list of three acceptable structural steel wt shapes that can be used as an 18 ft long pin-ended column to carry an axial compression load of 30 kips. Include the most economical wt8, wt9, and wt10.5 shapes on your list, and select the most economical shape from the available alternatives.
Answers
Based on the given criteria, the following three structural steel wt shapes are acceptable as pin-ended columns to carry an axial compression load of 30 kips for an 18 ft long span:
1. W8x31: This shape has a weight of 31 pounds per foot and a moment of inertia of 82.7 in^4.
2. W9x31: This shape has a weight of 31 pounds per foot and a moment of inertia of 96.2 in^4.
3. W10.5x30: This shape has a weight of 30 pounds per foot and a moment of inertia of 109 in^4.
Out of these three options, the most economical shape is W10.5x30 as it has the lowest weight and the highest moment of inertia, making it the most cost-effective option.
To learn more about columns click the link below:
brainly.com/question/29498200
#SPJ11
is it worth replacing compressor on ac unit in car?
Answers
It depends on the age and condition of the car's AC unit, as well as the cost of the compressor replacement. If the car is relatively new and the AC unit is in good condition, replacing the compressor may be a worthwhile investment to extend the life of the unit.
However, if the car is older or the AC unit has other issues, it may be more cost-effective to replace the entire unit instead of just the compressor.
Ultimately, the decision to replace the compressor on an AC unit in a car depends on a variety of factors and should be based on a careful assessment of the costs and benefits. It is recommended to consult with a qualified mechanic or automotive technician to determine the best course of action for your specific situation.
For more information about AC unit, visit:
https://brainly.com/question/27466640
#SPJ11
Standards relating to technical drawing
Answers
Answer:
Borders, Dimensions Identified, Scale, Text Box with Date/Author/Title/Version Number
Explanation:
Technical drawings have many standards in order to maintain integrity and ensure that they can be used by engineers to produce what is mapped out in the drawing.
Every technical drawing needs to have borders and a text box with all information related to the drawing. This includes the date it was created, date it was updated, version number, title, and author.
Furthermore, each drawing should have necessary dimensions with a scale. At the same time, technical drawings should not be over-dimensioned or repetitive.
All of these things must be on a technical drawing to allow professional engineers to sign off on drawings.
For the network of Fig. below, draw the output waveform if Vr = 4.3V , R = 1000Omega and Vi=25 sin ot. Assume an Si diode is used. + R D V_{i}; V_{r}; V_{o}
Answers
The steel bracket is used to connect the ends of two cables. if the allowable normal stress for the steel is sallow = 30 ksi, determine the largest tensile force p that can be applied to the cables. assume the bracket is a rod having a diameter of 1.5 in.
Answers
The largest tensile force that can be applied to the cables given a rod with diameter 1.5 is 2013.15lb
The static equilibrium is given as:
F = P (Normal force)
Formula for moment at section
M = P(4 + 1.5/2)
= 4.75p
Solve for the cross sectional area
Area = \(\frac{\pi d^{2} }{4}\)
d = 1.5
\(\frac{\pi *1.5^{2} }{4}\)
= 1.767 inches²
Solve for inertia
\(\frac{\pi *0.75^4}{4}\)
= 0.2485inches⁴
Solve for the tensile force from here
\(\frac{F}{A} +\frac{Mc}{I}\)
30x10³ = \(\frac{P}{1.767} +\frac{4.75p*0.75}{0.2485} \\\\\)
30000 = 14.902 p
divide through by 14.902
2013.15 = P
The largest tensile force that can be applied to the cables given a rod with diameter 1.5 is 2013.15lb
Read more on tensile force here: https://brainly.com/question/25748369
This wired networking standard specifies the order in which data is sent through the network.
Select one:
a. Ethernet
b. WiMAX
c. LTE
d. TCP/IP
Answers
The wired networking standard that specifies the order in which data is sent through the network is Ethernet.
Ethernet is a widely used wired networking standard that defines the protocols and specifications for data transmission over a local area network (LAN). It specifies the order in which data is sent through the network by utilizing the Carrier Sense Multiple Access with Collision Detection (CSMA/CD) algorithm.
The CSMA/CD algorithm ensures that multiple devices connected to an Ethernet network can share the same communication medium without interfering with each other. Before transmitting data, a device using Ethernet listens to the network to detect if it is clear to send data. If the network is busy, it waits for an opportune moment. Once the network is clear, the device sends the data, constantly monitoring for collisions. If a collision occurs (when two or more devices transmit data simultaneously), they stop transmitting, wait for a random period of time, and then retry.
By following this protocol, Ethernet ensures orderly and efficient data transmission within the network, minimizing collisions and maximizing data throughput. It has become the de facto standard for wired local area networks due to its reliability, scalability, and widespread adoption.
Learn more about Ethernet
brainly.com/question/31610521
#SPJ11
The steel shaft has a diameter of 40 mm and is fixed at its ends A and B . If it is subjected to the couple determine the maximum shear stress in regions AC and CB of the shaft. G st = 75 GPa.
Q6/
Answers
Answer:
See explanation.
Explanation:
Since no figure was given I solved a problem that was similar to the one you described that I worked in my mechanics of materials class. The method should be very similar for your figure. See attached image for my work.
If it is subjected to the couple determine the maximum shear stress in regions AC and CB of the shaft. G st = 75 GPa. Than the answer will be 52Mpa.
What we need to perform?We need to perform a two step process to obtain the maximum shear stress on the shaft. For the solid shaft,
P=2×pi×N×T/60 or T=60×p/2×pi×N
Where P=power transmitted by the shaft=50×10³W
N=rotation speed of the shaft in rpm=730rpm
Pi=3.142
T is the twisting moment
By substituting the values for pi, N and P, we get
T=654Nm or 654×10³Nmm
Also, T=pi×rho×d³/16 or rho=16×T/pi×d³
Where rho=maximum shear stress
T = twisting moment=654×10³Nmm
d= diameter of shaft= 40mm
By substituting T, pi and d
Rho=52Mpa
b. For a hollow shaft, the value for rho is unknown
T=pi×rho(do⁴-di⁴/do)/16
Rho=T×16×do/pi×(do⁴-di⁴)
Where
T= twisting moment=654×10³Nmm gotten above
do=outside shaft diawter=40mm
di= inside shaft diameter =30mm
Pi=3.142
Substituting values for pi, do, di and T.
Rho=76Mpa
Therefore, If it is subjected to the couple determine the maximum shear stress in regions AC and CB of the shaft. G st = 75 GPa. Than the answer will be 52Mpa.
Learn more about shaft on:
https://brainly.com/question/30541080
#SPJ2
For each of the studies described in questions 4a) and 4b), indicate the appropriate statistical test for analyzing the relationship between the variables. Assume that the underlying assumptions of the tests have been satisfied.
A researcher tested the relationship between college students’ need for achievement as assessed on a 20-item test and their grade point averages. Explain your decision.
A consumer psychologist studied the relationship between gender and preference for Ford, Chevrolet, and Chrysler cars. One hundred men and 100 women were interviewed and asked which make they preferred. Explain your decision.
A person who claims to have psychic powers tries to predict the outcome of a roll of a die on each of 100 trials. He correctly predicts 21 rolls. Using an alpha level of 0. 05 as a criterion, what should we conclude about the person’s claim?
Answers
For the study described in question 4a) that examines the relationship between college students' need for achievement and their grade point averages, the appropriate statistical test would be a correlation analysis.
In question 4b), where the relationship between gender and preference for Ford, Chevrolet, and Chrysler cars is studied, the appropriate statistical test would be a chi-square test of independence.
Lastly, in question 4c), where a person claims to have psychic powers and predicts the outcome of a roll of a die, a binomial test would be appropriate.
In question 4a), the need for achievement and grade point averages are both continuous variables. To analyze their relationship, a correlation analysis, such as Pearson's correlation coefficient, would be suitable. This test quantifies the strength and direction of the linear relationship between the two variables. It helps determine if there is a significant association between students' need for achievement and their grade point averages. In question 4b), the variables under study are gender (a categorical variable) and car preference (another categorical variable). To assess the relationship between these variables, a chi-square test of independence is appropriate. This test allows us to determine if there is a significant association between gender and car preference. It helps us understand if there are differences in car preferences between men and women. In question 4c), the person's claim of psychic powers is tested based on their ability to predict the outcome of a roll of a die. Since the person's predictions are binary (either correct or incorrect), a binomial test is suitable. This test determines if the success rate significantly deviates from what would be expected by chance. Using an alpha level of 0.05, the binomial test can help evaluate the person's claim and determine if their predictions are statistically significant or due to chance.
Learn more about Pearson's correlation coefficient here:
https://brainly.com/question/31829492
#SPJ11
Need help with Part 1 – Additional Operations I MATLAB question
Answers
gove it to me. I'll do my best
How much does 1 gallon of water weigh in pound given that the density of water is 1gram/ cm3
Answers
Explanation:
There are 8.35 pounds in a gallon of water. Water weighs 1 gram per cubic centimeter or 1 000 kilogram per cubic meter, i.e. density of water is equal to 1 000 kg/m³; at 25°C (77°F or 298.15K) at standard atmospheric pressure.
A driver is traveling at 90 km/h down a 3% grade on good, wet pavement. An accident
investigation team noted that braking skid marks started 75m before a parked car was
hit at an estimated 45 km/h. Ignoring air resistance, calculate the theoretical friction
coefficient.
Answers
Answer:
0.35
Explanation:
We resolve the component of the weight of the car along and perpendicular to the grade. We have mgsinФ and mgcosФ where Ф = angle of grade.
Now, the frictional force f = μN = μmgcosФ where μ = coefficient of friction
So, the net force along the grade is F = mgsinФ - μmgcosФ.
The work done by this force moving a distance, d along the grade is
W = (mgsinФ - μmgcosФ)d
This work equals the change in kinetic energy of the car. So ΔK = 1/2m(v₂² - v₁²) = W = (mgsinФ - μmgcosФ)d
1/2m(v₂² - v₁²) = (mgsinФ - μmgcosФ)d
1/2(v₂² - v₁²) = (gsinФ - μgcosФ)d
(v₂² - v₁²)/2d = (gsinФ - μgcosФ)
dividing through by gcosФ, we have
(v₂² - v₁²)/2dgcosФ = (gsinФ/gcosФ) - μgcosФ/gcosФ
(v₂² - v₁²)/2dgcosФ = tanФ - μ
μ = tanФ - (v₂² - v₁²)/2dgcosФ
given that tanФ = 3% = 3/100 and 1 + tan²Ф = 1/cos²Ф, cosФ = 1/(√1 + tan²Ф) = 1/(√1 + (3/100)²) = 1/(√1 + (9/10000)) = 1/(√10000 + 9/10000) = 1/√(10009/10000) = 100/√10009 = 100/100.05 = 0.9995.
Also, given that v₁ = 90 km/h = 90 × 1000/3600 m/s = 25 m/s and v₂ = 45 km/h = 45 × 1000/3600 m/s = 12.5 m/s, d = 75 m and g = 9.8 m/s².
So, substituting the values of the variables into the equation, we have
μ = tanФ - (v₂² - v₁²)/2dgcosФ
μ = 3/100 - ((12.5 m/s)² - (25 m/s)²)/(2 × 75 m × 9.8 m/s² × 0.9995)
μ = 3/100 - ((156.25 m/s)² - (625 m/s)²)/1,469.265 m²/s²
μ = 3/100 - (-468.75 m²/s²)/1,469.265 m²/s²
μ = 3/100 + 468.75 m²/s²/1,469.265 m²/s²
μ = 0.03 + 0.32
μ = 0.35
So, theoretical friction coefficient is 0.35
Calculate the resistance of a lamp if the current through it is 0.4 A and the voltage across it is 8 V.
Answers
Answer:
Answer is 3.2 Ω (Ohms)
Explanation:
From Ohms Law I = V/R
R = V(I)
R = 8(0.4)
R = 3.2
The resistance of a lamp if the current through it is 0.4 A and the voltage across it is 8 V is 3.2 ohm.
What is Ohm's Law?According to Ohm's law, when all other physical parameters, including temperature, are held constant, the voltage across a conductor is directly proportional to the current flowing through it.
According to Ohm's Law, the electrical current I flowing through a particular conductor is precisely proportional to the potential difference (voltage) V across its ends (assuming that the conductor's physical properties, such as its temperature and pressure, stay constant). where R is a proportionality constant.
Given:
Current, I= 0.4 A
Voltage, V= 8 V
Using Ohm's Law
V= IR
I = V/R
R = V(I)
R = 8(0.4)
R = 3.2 ohm
Hence, the resistance of a lamp if the current through it is 0.4 A and the voltage across it is 8 V is 3.2 ohm.
Learn more about Ohm's law here:
https://brainly.com/question/1247379
#SPJ5
When two watercraft are crossing each other's paths, which should
assume the give-way responsibility?
Answers
The watercraft in the crossing are given with the responsibility to the starboard side to give the way and avoid collision.
What are crossing rules?The crossing rules are given as the safety rules that are mediated in order to avoid the collision accidents when the two vehicles are crossing the path.
In the sea, the rules are given with the watercraft at the starboard side or the giveaway side to make the way to the other watercraft and avoid collision.
Learn more about crossing rules, here:
https://brainly.com/question/4773184
#SPJ1
Which two physical resources are abstracted by the hypervisor and presented to virtual machines? (Choose two.)
A. Libraries
B. CPU
C. Application
D. Desktop
E. Memory
Answers
The two physical resources that are abstracted by the hypervisor and presented to virtual machines are:
B. CPU (Central Processing Unit)
E. Memory
Explanation:
1. CPU (Central Processing Unit): The hypervisor abstracts the physical CPU(s) of the host machine and presents them to virtual machines as virtual CPUs (vCPUs). Each virtual machine is allocated a portion of the CPU resources, allowing them to run their own operating systems and execute their own processes independently. The hypervisor manages the scheduling and allocation of CPU resources among the virtual machines.
2. Memory: The hypervisor also abstracts the physical memory (RAM) of the host machine and presents it to virtual machines as virtual memory. Each virtual machine is assigned a specific amount of memory that it can utilize for running its applications and processes. The hypervisor handles the management and allocation of memory resources, ensuring that each virtual machine receives its allocated memory and preventing conflicts or overlaps.
It's important to note that the other options mentioned are not directly abstracted by the hypervisor:
A. Libraries: Libraries are software components that contain precompiled functions and routines. They are not physical resources that can be abstracted by the hypervisor.
C. Application: Applications are software programs that run on top of the operating system. The hypervisor virtualizes the underlying hardware resources for virtual machines, but it does not directly abstract or manage specific applications.
D. Desktop: The desktop refers to the user interface and graphical environment provided by the operating system. The hypervisor focuses on abstracting and managing hardware resources rather than the desktop interface itself.
In summary, the hypervisor abstracts and presents the physical CPU and memory resources of the host machine to virtual machines as virtual CPUs and virtual memory, respectively. This allows virtual machines to have their own isolated computing environments while sharing the underlying hardware resources efficiently.
Learn more about Central Processing Unit: https://brainly.com/question/474553
#SPJ11
which of the following is statements explains why there are fewer limitations on solar energy use than there were in the past? (select the two correct answers.)
Answers
The options statements that explains why there are fewer limitations on solar energy use than there were in the past is option C and B:
countries that have the metals needed to produce solar panels will not sell these metals to other countries solar panels are expensive to install, and sunlight is only available part of the dayWhat are the limitations of solar energy?When it's cold outside and there are cloudy days, productivity is generally slow. Installation and initial costs are high. Large surface areas are needed for production at the consumer level.
While traditional energy sources can be dispatched whenever we need them, solar energy is intermittent and cannot provide electricity on demand without storage. However, it does produce a sizable amount of energy during the day.
Here are a few of the most significant drawbacks of solar energy that you should take into account before going solar.
hefty investment The relatively high cost of solar panel installation is one of the most significant drawbacks of solar cells.Interior Needs..Seasonal Energy. Solar Cells on Your Accommodation.Learn more about solar energy from
https://brainly.com/question/17711999
#SPJ1
See full question below
a. efficiency is improving
b. countries that have the metals needed to produce solar panels will not sell these metals to other countries
c. solar panels are expensive to install, and sunlight is only available part of the day
d. climate change is increasing cloud production thereby reducing available sunlight
NEED A CHEN NOTATION DIAGRAM OF THE FOLLOWING INFORMATION
***** This is a Chen Notation ER Diagramming Assignment. Only Chen Notation Diagrams will be accepted. *****
During peak periods, the Temporary Employment Corporation (TEC) places temporary workers in companies. TEC’s manager gives you the following description and business rules of the business:
TEC has a file of candidates who are willing to work. They would like to put this Candidate File Information into a Database.
If the candidate has worked before, that candidate has a specific job history. (Naturally, no job history exists if the candidate has never worked.) Each time the candidate works temporarily for an outside company, one additional job history record is created. TEC wants the candidate's Job History in a database.
Each candidate has earned several qualifications. Each qualification may be earned by more than one candidate. (For example, it is possible for more than one candidate to have earned a BBA degree or a Microsoft Network Certification. And clearly, a candidate may have earned both a BBA and a Microsoft Network Certification.) TEC wants to store all existing and future types of Qualifications in a database.
TEC offers courses to help candidates improve their qualifications. This is done by offering training courses so that candidates can earn qualifications. TEC wants to keep store all courses that they offer for qualifications in a Database
Every course develops one specific qualification; however, TEC does not offer a course for every qualification. Some qualifications have multiple courses that develop that qualification.
Some courses cover advanced topics that require specific qualifications as prerequisites. Some courses cover basic topics that do not require any prerequisite qualifications. A course can have several prerequisites. A qualification can be a prerequisite for more than one course.
TEC also has a list of companies that request temporary employees.
Each time a company requests a temporary employee, TEC makes an entry in the Openings folder. That folder contains an opening number, a company name, required qualifications, a starting date, and anticipated ending date, and hourly pay. TEC wants to store all company requests for temporary jobs in a database.
When a candidate matches the qualification, the job is assigned, and an entry is made in the Placement Record folder. That folder contains an opening number, a candidate number, the total hours worked, etc. In addition, an entry is made in the job history for the candidate.
An opening can be filled by many candidates, and a candidate can fill many openings.
Summary Information that has to be Maintained
Client Company Information. These are companies that need Temporary Workers.
Job Opening Information, a Company offers one or more Temporary Job-Opening Positions
Qualification or Skills of the Candidates in (TEC). A Candidate can have one or more Qualifications
Candidate or Temporary Worker Information. A Candidate is a Temporary Worker seeking a position
Candidate JOB_HISTORY Information. This is a Temporary Workers Work History.
Placement Information. This is the Record of all Temporary Workers Placed in a Temporary Job
Training Courses that are being offered to (TEC) Candidates.
Training Courses that Candidates have taken
Given that information, do the following:
Draw the Chen ERDs for this enterprise
Identify all Entities
Identify all Attributes for the Entities
Identify all possible relationships
Identify the Cardinality for each relationship
Resolve all 1: N relationships
Resolve all M: N relationships
Identify Primary Keys and map the Foreign Keys based on the described Cardinality
Answers
The ER diagram for the Temporary Employment Corporation (TEC) based on the business rules given is given below: Attributes for Entities:
(One-to-Many)One candidate can have many job histories. (One-to-Many)One job history can belong to only one candidate. (One-to-One)One placement can belong to only one candidate. (One-to-One)One job opening can be placed by many placements. (One-to-Many)One candidate can have many placements.
In the given diagram below, all the relationships and primary keys are labeled correctly and the ER diagram is resolved for all M:N relationships and 1:N relationships. If you want to add more attributes to each entity, you can do it accordingly:
To know more about Employment visit:
https://brainly.com/question/17459074
#SPJ11
prior to installation of a pneumatic surface-bonded type deicer boots, on the leading edge of the wing, you should
Answers
Before installing pneumatic surface-bonded type deicer boots on the leading edge of the wing, certain preparations should be made.
First, a thorough inspection of the wing's leading edge should be conducted to ensure it is free from any dirt, debris, or damage. The wing should be cleaned and any corrosion should be treated appropriately. Additionally, the deicer boot installation kit should be checked to ensure all the necessary components are available and in good condition.
The leading edge of an aircraft wing is a critical area that requires careful preparation before installing deicer boots. The first step is to inspect the leading edge thoroughly, looking for any signs of dirt, debris, or damage. It is crucial to have a clean surface to ensure proper adhesion of the deicer boots. If any contaminants are present, they should be removed using an appropriate cleaning method. Furthermore, any signs of corrosion should be addressed and treated accordingly to prevent further damage.
In addition to inspecting the wing, it is important to ensure that all the necessary components for the deicer boot installation are available and in good condition. This includes the deicer boot material, adhesive, and other related equipment. The installation kit should be checked to confirm that everything is present and ready for use. Having all the components in place before beginning the installation process helps to ensure a smooth and efficient installation of the deicer boots.
By following these preparation steps, you can ensure that the wing's leading edge is properly inspected, cleaned, and prepared for the installation of pneumatic surface-bonded type deicer boots. This helps to promote effective deicing performance and maintain the safety and performance of the aircraft in icy or freezing conditions.
Learn more about Boots:
brainly.com/question/14356249
#SPJ11
The unit of solar radiation?
Answers
Answer: The solar irradiance is measured in watt per square metre (W/m2) in SI units. Solar irradiance is often integrated over a given time period in order to report the radiant energy emitted into the surrounding environment (joule per square metre, J/m2) during that time period.
Explanation: hope that helped!
What is paleobotony and what significance does this field have to our understanding of plants? Environmental science
Answers
Answer: See explanation
Explanation:
Paleobotany is simply referred to as the branch of botany that deals with the study of the fossils of plants and the identification of the remains of plants.
Paleobotany lays emphasis on the fossils of plant fossils, such as fungi, algae, ferns, etc. It should be noted that paleobotany is vital as it helps scientists understand the evolution of plants. This is vital in determining the classes to which certain plants belongs.
(20 points) {brainliest} pls helpp
Manufacturing processes involve several types of waste. Which methodology seeks to reduce all types of waste to improve efficiency?
A. Six Sigma
B. Just-in-time production
C. Agile project management
D. Lean manufacturing
Answers
Hope this helps
Find the relationship between angles θθ and ϕϕ using the equations of equilibrium and solve for θθ. Suppose that the angles are expressed in radians. Express your equation for θθ in terms of ϕϕ. Express your answer in radians
Answers
In short, you can avoid knowing the mass of the hanging mass's weight or even calculating the tension force if you carefully label your forces.
Find the relationship between angles ?
I believe the way you categorize the forces is making things more difficult than they need to be. Make sure that all of the forces you mention are the forces on the pulley and not forces at another location (such as on the bottom-right anchor, even if they are equal in magnitude... see below). The rope must have no mass, I suppose. If this is accurate, the tension force throughout the rope is constant. Call it a trope .You currently have two forces of magnitude Trope, one going straight down and one moving down-and-right, on your free-body diagram for the pulley (not the arm or the bracket). The angle must be marked. here. Only the supporting arm's force is exerted on the (massless) pulley. Name it Tarm. You currently have three factors acting on your FBD. Make certain is described in this. Link your three forces together using Newton's laws. Using some visual vector algebra, you can calculate the unknown angle in terms of if you know what the total force is not using math.
In short, you can avoid knowing the mass of the hanging mass's weight or even calculating the tension force if you carefully label your forces.
To learn more about tension force refer
https://brainly.com/question/2008782
#SPJ4
Given a typical geothermal gradient of 25°c/km, oil is generated from kerogen at ______, corresponding to temperatures of _____
Answers
Oil is generated from kerogen at temperatures typically ranging from 60°C to 150°C (140°F to 302°F). The specific temperature range at which oil generation occurs can vary depending on the composition and maturity of the source rock.
Regarding the geothermal gradient, the typical value of 25°C/km (or 25°C per kilometer of depth) represents the increase in temperature with increasing depth in the Earth's crust. Therefore, to determine the corresponding temperatures for oil generation, we need to consider the depth at which the process occurs.
Assuming a linear relationship between depth and temperature increase, for every kilometer of depth, the temperature increases by 25°C. Therefore, we can calculate the temperatures at different depths using the geothermal gradient. For example:
- At 2 kilometers depth: Temperature = 25°C/km * 2 km = 50°C
- At 3 kilometers depth: Temperature = 25°C/km * 3 km = 75°C
By applying the geothermal gradient, we can estimate the temperatures at different depths to understand the conditions at which oil generation from kerogen occurs.
Learn more about geothermal gradient here:
https://brainly.com/question/29803985
#SPJ11
An open tank has a bulge in its vertical slide that is semicurcular in shape. Determine the horiztonal and vertical components of the force that the water exerts on the bulge
Answers
The horizontal and vertical components of the force that the water exerts on the bulge are 642.936 lb and 141.145 lb
How to solve for the components of the forceThe radius of the bulge is given as 1.2 ft
Length of the bulge is 1 ft
The projected area of the bulge is 2RL
= 2 x 1.2 x 1
= 2.4 ft²
We have to find the horizontal components of the force
Hc = 3.1 + 1.2 = 4.3 ft
fH = 62.3 x 4.3 x 2.4
= 642.936 lb
Hence the horizontal components of the force is 642.936 lb
How to find the vertical component of force
Fv = 62.4 x (π x 1.2²/2) x 1
= 62.4 x 2.26285 x 1
= 141.145 lb
Hence the vertical component of the force is 141.145 lb
Raed more on vertical components of force here
https://brainly.com/question/14753827
#SPJ1
Which of the following is not a step in a building’s life cycle?
evaluation
maintenance
demolition
resource extraction
Answers
Answer:
resource extraction
Explanation:
common sense
Help!!
Which of the following describes the first and foremost guideline in dimensioning?
A. Legibility
B. Measurement
C. Accuracy
D. Sketching
Answers
Answer:
it should be accuracy
Explanation:
Answer:
option C
Explanation:
An organization sets its standards for quality according to the best product it can produce.
True
False
Answers
Answer:
True!! took the test
Explanation: