Describe various emerging technologies and their impact on the field of robotics.

Answer:

over your right shoulder

Explanation:

Answer:

When you want to back out of a parking space, you should do it slowly and look over your right shoulder while backing.

Biomedical engineers may need to dilute solutions for several reasons. One common reason is to adjust the concentration of a particular substance to a desired level for experimental or clinical purposes.

Dilution allows for precise control over the concentration of a solution, enabling researchers or healthcare professionals to study the effects of different concentrations of substances on biological systems.

In biomedical engineering, dilution is often employed when working with drugs or therapeutic agents. By diluting a concentrated drug solution, engineers can create different dosages suitable for specific applications. This is crucial for ensuring patient safety and achieving desired therapeutic outcomes.

Additionally, dilution is necessary for calibration and quality control purposes in biomedical engineering. Diluting stock solutions of known concentrations can generate a range of standard solutions used to calibrate instruments, verify measurement techniques, or assess the accuracy of analytical methods.

Dilution plays a critical role in ensuring accurate and reliable data collection, analysis, and experimentation within the field of biomedical engineering.

In summary, dilution is an essential technique for biomedical engineers as it allows them to control the concentration of substances, customize drug dosages, and maintain accuracy in calibration and quality control processes, all of which are vital for research, development, and healthcare applications.

For more questions on Biomedical engineers , click on:

https://brainly.com/question/30235387

#SPJ8

Answer:

Did you need help answering this?

Explanation:

Answer:

Air Compressor Governor

Explanation:

The governor regulates how much air is pumped into the air pumping stations by the air compressor. The governor prevents the compressors from blowing air whenever the air pressure exceeds the "cut-out" level (about 125 pounds per square inch or "psi").

The transition from 85 to 100 psi will take no more than 45 seconds. During the build-up, keep an eye on the air pressure gauge to guarantee appropriate air system performance.

Answer:

Explanation:There are many definitions of problem-solving – but at a basic level, it focuses on the ability to accurately assess a situation and arrive at a positive solution.

Solving problems is an analytical skill that many employers look for when reviewing candidate application forms.

This particular skill isn’t restricted to a single sector, industry or role, though employers in the engineering and legal industries, in particular, tend to look for proficiency.

Consequently, questions about your problem-solving ability are commonplace in interviews.

Hospitals, universities, research institutions, and manufacturers of diagnostic and medical instruments are some typical employers of biomedical engineers.

Biomedical engineers are experts who contribute to the creation of cutting-edge medical technology.

A strong academic background in a relevant field, such as physics, mechanical engineering, electrical engineering, or biomedical engineering, is necessary to become a biomedical engineer. For graduates who are not engineers, postgraduate degrees can be advantageous and may even be required for specific positions.  

It can be deduced that wearing certified eye protection and appropriate clothes can lessen the likelihood of an employee being hurt at work.

Personal protection equipment (PPE) includes clothes, helmets, goggles, or other garments or equipment meant to protect the wearer's body from damage or illness. Physical, electrical, heat, chemicals, biohazards, and airborne particulate matter are some of the risks addressed by protective equipment.

Protective equipment may be worn for work safety and health reasons, as well as for sports and other leisure activities. Personal protection equipment is used to limit employee exposure to hazards when engineering and administrative measures are not practicable Personal protective equipment is used to lessen employee exposure to risks when administrative and engineering controls are not practical or efficient in bringing these risks down to acceptable levels. When there are risks present, PPE is required.

Learn more about personal protective equipment at:

https://brainly.com/question/30262929

#SPJ1

The claim being made in in the above passage is that " It makes financial sense to stop using the penny." (Option B)

The textual evidence that supports the above claim is "Not only does it make financial sense to take the penny out of circulation, but it also makes environmental sense." [Para. 2]

Textual evidence is evidence related to a text which supports claims made in such a text.

Learn more about claims at:
https://brainly.com/question/2748145
#SPJ1

Answer:

25°

Explanation:

At the factory, a standard cold chisel are ground to 25° which is appropriate for the various works performed by a chisel. However, A chisel with a 30° cutting edge is advisable to users because it will help the edge to last longer.

Engineering is an art form in which the focus is to make life and society better.

To learn more about Engineers refer,

https://brainly.com/question/28902900

#SPJ1

The correct answer is C. Biomedical engineering.

The area of Biomedical engineering is a distinct field that utilizes methods and concepts from engineering to address medical challenges and innovations.

The task involves enhancing healthcare delivery, diagnosis, and treatment via the creation and engineering of diverse medical devices, equipment, and pharmaceuticals.

A vast array of products falls under this area, such as tools for diagnosing medical conditions like magnetic resonance imaging (MRI) and computerized tomography (CT) scanners, medical equipment for treatment purposes such as pacemakers or insulin pumps, medications for various illnesses, and prosthetic limbs designed to aid those with limited mobility.

Read more about Biomedical engineering here:

https://brainly.com/question/30235387
#SPJ1

Modern manufacturing has significantly advanced to cater to customization and meet individual needs.

Few examples of how modern manufacturing allows for customization:

1)3D Printing/Additive Manufacturing: 3D printing enables the production of highly customized items by building layer upon layer of material.

This technology allows for the creation of unique shapes, sizes, and designs, enabling customization on a personal level.

From customized prosthetics to personalized jewelry, 3D printing revolutionizes manufacturing by tailoring products to individual requirements.

2)Mass Customization in Apparel: Traditional manufacturing processes often involved producing items in standard sizes, limiting options for consumers.

However, modern manufacturing techniques, such as computer-aided design (CAD) and computer-aided manufacturing (CAM), allow for mass customization in apparel.

By utilizing body scanning and virtual fitting technologies, companies can offer custom-made garments that fit an individual's unique measurements and style preferences.

3)Customized Electronics: With advancements in technology, manufacturers can now offer customization options for electronic devices.

Customers can personalize specifications such as memory capacity, display size, and processing power to suit their needs.

Some companies even allow customers to design the appearance and choose specific features of their gadgets, ensuring that the final product aligns with their preferences.

4)Personalized Food and Beverages: Manufacturing has extended to the food and beverage industry, enabling customization in culinary experiences.

Companies now offer personalized nutrition plans, customized meal kits, and even 3D-printed food tailored to individual dietary requirements and taste preferences.

5)Automotive Industry: The automotive industry has embraced customization, allowing customers to configure various aspects of their vehicles, including color, trim, interior options, and additional features.

Some manufacturers offer online platforms where customers can design and visualize their personalized cars before ordering.

For more questions on Modern manufacturing

https://brainly.com/question/8462042

#SPJ8

In order to draw the locus, we can construct a circle with a radius of 1696.62mm centered at the center of the culvert.

The diameter of the wheel is given as 540mm, so the radius of the wheel is half of that: 540mm / 2 = 270mm. The circumference of the wheel can be calculated as 2π times the radius: 2π × 270mm

≈ 1696.62mm.

Since the circumference of the wheel is approximately 1696.62mm and point P traces out a circle, the locus of point P will be a circle with a circumference of 1696.62mm.

Hence, to draw the locus, we can construct a circle with a radius of 1696.62mm centered at the center of the culvert.

Learn more about locus on

https://brainly.com/question/13941750

#SPJ1

Dust, dirt, or metal chips can pose a potential eye injury risk in a shop.

Dust, dirt, or metal chips can pose a potential hazard to the eyes and result in eye injury risk in a shop.

It is important to wear proper eye protection when working with tools or materials that can generate flying debris to avoid eye injuries.

This is one of the necessary precautions that should be taken when working in a factory or shop that has flying debris.

Read more about safety measures here:

https://brainly.com/question/14367881

#SPJ1

Answer:

Direct purposes include bathing, drinking, and cooking, while examples of indirect purposes are the use of water in processing wood to make paper and in producing steel for automobiles. The bulk of the world's water use is for agriculture, industry, and electricity.

Answer: develop, build, and test and design, manufacture, and test all kinds of mechanical things: tools, toys, roller coasters, vehicles, and other devices.Aug 5, 2022

Explanation:

Making ethical decisions involves considering the moral implications of our choices and actions.

Ethical decision-making requires us to take into account the impact of our decisions on others and to act in ways that are fair, just, and respectful. It is important to consider not only the short-term consequences of our actions but also the long-term effects on ourselves, others, and society as a whole.

Therefore, Ethical decision-making involves balancing competing interests and values and requires us to be thoughtful and deliberate in our choices. Ultimately, making ethical decisions requires us to act with integrity and to be accountable for our actions.

Learn more about ethical decision here:

https://brainly.com/question/9057370

#SPJ1

Answer:

Do you mean writing about shops that close on Sunday's and making the opinion whether they should or not?

Explanation:

Answer:

1/3 power

Explanation:

I'm just a smart guy

The python program is an illustration of statistical operations, such as addition, subtraction, and multiplication.

This Python program, which uses comments to explain each line, is as follows:

# Program make a simple calculator

# This function adds two numbers

def add(x, y):

   return x + y

# This function subtracts two numbers

def subtract(x, y):

   return x - y

# This function multiplies two numbers

def multiply(x, y):

   return x * y

# This function divides two numbers

def divide(x, y):

   return x / y

print("Select operation.")

print("1.Add")

print("2.Subtract")

print("3.Multiply")

print("4.Divide")

while True:

   # take input from the user

   choice = input("Enter choice(1/2/3/4): ")

   # check if choice is one of the four options

   if choice in ('1', '2', '3', '4'):

       num1 = float(input("Enter first number: "))

       num2 = float(input("Enter second number: "))

       if choice == '1':

           print(num1, "+", num2, "=", add(num1, num2))

       elif choice == '2':

           print(num1, "-", num2, "=", subtract(num1, num2))

       elif choice == '3':

           print(num1, "*", num2, "=", multiply(num1, num2))

       elif choice == '4':

           print(num1, "/", num2, "=", divide(num1, num2))

       # check if user wants another calculation

       # break the while loop if answer is no

       next_calculation = input("Let's do next calculation? (yes/no): ")

       if next_calculation == "no":

         break

   else:

       print("Invalid Input")

At the end of the program, addition, subtraction, and multiplication operations are printed.

To learn more about the Python Program click here:

brainly.com/question/15061326

#SPJ1

Both Technician A and Technician B are correct in their statements.

Technician A is correct in stating that the Warranty Policy and Procedures Manual requires time punch/flags for any additional Repair Order completed in conjunction with a normal Pre-Delivery Service (PDS).

This means that if there are any extra repairs performed alongside the regular PDS, each repair must be recorded and flagged separately to track the time spent on them.

Technician B is also correct in mentioning that the Warranty Policy and Procedures Manual indicates the need for separate time flags for each repair when multiple additional repairs are made in conjunction with a normal PDS.

This reinforces the requirement for individual tracking of the time spent on each additional repair, ensuring accurate documentation and appropriate warranty coverage for each repair performed.

Therefore, both technicians are providing accurate information about the requirements outlined in the Warranty Policy and Procedures Manual regarding time punch/flags for additional repairs completed in conjunction with a normal PDS.

For more questions on Warranty, click on:

https://brainly.com/question/13648985

#SPJ8

Answer:

lucid dreams :)

Explanation:

Answer:

Lucid Dreams

Explanation:

The scope of BS computer science in Pakistan is quite vast

try this :)

Answer:

v = 2.68 m/s

Explanation:

Given that,

Mass of a solid cylinder, m = 10 kg

The kinetic energy of a solid cylinder, K = 36 J

We need to find the velocity of the object. The formula for the kinetic energy is given by :

\(K=\dfrac{1}{2}mv^2\\\\v=\sqrt{\dfrac{2K}{m}} \\\\v=\sqrt{\dfrac{2\times 36}{10}} \\\\v=2.68\ m/s\)

So, the velocity of the object is 2.68 m/s.

Answer:

The outer tube of the pump is drawn with solid lines because it represents the visible edges of the object, which are the most important and prominent features of the drawing. Solid lines are used to indicate visible edges, while other types of lines such as dashed or dotted lines are used for hidden or construction lines that are not meant to be seen in the final drawing.

Explanation:

When drawing an object, it's important to distinguish between the visible edges and the hidden or construction lines. The visible edges are the lines that represent the outer contour or silhouette of the object, which define its shape and form. In the case of the bicycle pump, the outer tube is the most prominent and recognizable feature of the pump, so it's drawn with solid lines to emphasize its importance and to make it stand out from the other parts of the pump.

On the other hand, the hidden or construction lines are used to guide the drawing process, to show the internal structure or components of the object, or to indicate the position of other features that are not visible from the current viewpoint. These lines are usually drawn with dashed or dotted lines to distinguish them from the visible edges and to avoid confusion.

By using different types of lines, the artist can create a clear and accurate representation of the object, with all the relevant information conveyed in a concise and understandable way. This is especially important in technical or scientific drawings, where precision and clarity are essential for conveying complex ideas or designs.

Answer:

you cannot park

Explanation:

except you park in a compound because it is a two way road parking on either side could lead to accident or goslow