Declare an enum type for some of the colors red, yellow, and blue. [2 points] Declare a variable of the above enum type, a pointer to the enum type variable, and a reference to the enum t
Answers
the requested task can be fulfilled in C++ by declaring an enumeration (enum) type that includes 'red', 'yellow', and 'blue' colors.
Afterward, one can declare a variable of this enum type, a pointer to the enum type variable, and a reference to the enum type variable. In detail, an enumeration is a user-defined data type that consists of integral constants. To declare an enum for colors, one can do something like this:
```cpp
enum Color { RED, YELLOW, BLUE };
```
Each name in the enumeration list is assigned an integer value that starts from 0. Then, declaring a variable, a pointer, and a reference of the enum type can be achieved as follows:
```cpp
Color color = RED; // variable
Color* ptr = &color; // pointer
Color& ref = color; // reference
```
In this example, `color` is a variable of the enum type 'Color', `ptr` is a pointer that points to `color`, and `ref` is a reference to `color`.
Learn more about C++ by declaring an enumeration here:
https://brainly.com/question/31450174
#SPJ11
Related Questions
If p(a | b) = 0. 4, p(b) = 0. 8, and p(a) = 0. 5, are the events a complement and b independent?
Answers
No, events A and B are not complementary nor independent.
What are complementary events?Complementary events have probabilities that sum up to 1, meaning p(A) + p(A') = 1, where A' is the complement of A.
In this case, p(A) = 0.5, so p(A') should be 0.5 as well, but we have no information about A' probabilities.
For independence, we need to check if p(A|B) = p(A), or equivalently, p(A∩B) = p(A)p(B).
From the given information, p(A|B) = 0.4, and p(A) = 0.5, so they're not equal. Also, p(A∩B) = p(A|B)p(B) = 0.4 * 0.8 = 0.32, while p(A)p(B) = 0.5 * 0.8 = 0.4, which confirms that they are not independent events.
Read more about independent events here:
https://brainly.com/question/27665211
#SPJ4
Engineers study the properties of fluids, including viscosity and compressibility, to test the efficiency of systems under given conditions. True or False?
Answers
Answer:
True.
Explanation:
The compressibility of a fluid can be defined as a measure of the change in volume (density) with respect to the amount of pressure applied to the fluid. Thus, as the pressure of a compressible fluid increases, both its viscosity and density increases.
Some examples of compressible fluids are vapors, gases, air etc.
Additionally, the compressibility of fluids plays a significant role in the field of science such as in aerodynamics, fluid mechanics, thermodynamics etc.
Viscosity can be defined as a quantity expressing the magnitude of internal friction that restricts the ease of flow between parallel layers at some distance apart having unit speed relative to each other.
These properties of fluids, including viscosity and compressibility are usually being studied by engineers such as civil engineers, in order to test the efficiency of systems under given conditions.
Answer:
true
Explanation:
edge
The sinusoidal current source in the circuit shown in figure below produces the current Is=25cos100000t A. a) Construct the frequency-domain equivalent circuit. b) In the following circuit, connect impedance, Z=10 J−10 J in parallel with other impedances, under this condition find voltage of the circuit.
Answers
The voltage of the circuit is 82.125V
What is a Sinusoidal Current?A sinusoidal current is an alternating current (AC) that varies in magnitude and direction over time, following a sinusoidal waveform. It is called "sinusoidal" because its shape resembles a sine wave, which is a smooth and continuous curve that oscillates between positive and negative values.
Sinusoidal currents are commonly used in electrical power systems to transfer energy from power plants to homes and businesses. They have several advantages over direct current (DC) systems, including the ability to be easily transformed to different voltage levels using transformers, and the ability to be transmitted over long distances with minimal power loss.
Read more about Sinusoidal currents here:
https://brainly.com/question/31376601
#SPJ1
What is meant by to remodel and existing design of a
optimized sintered wicked heat pipe?
Answers
The term "remodel" implies making changes to the existing design rather than starting from scratch.
An optimized sintered wick heat pipe is a type of heat pipe that utilizes a sintered wick structure to enhance heat transfer. The sintered wick is typically made of porous metal or ceramic materials that promote capillary action and efficient fluid transport within the heat pipe.When remodeling the existing design, various aspects can be considered. This may involve modifying the dimensions, materials, or geometry of the heat pipe to enhance its performance.
The goal could be to improve heat transfer efficiency, increase thermal conductivity, reduce pressure drops, enhance durability, or optimize the heat pipe for specific operating conditions or applications.Remodeling the design may involve computational modeling, simulation, prototyping, and experimental testing to evaluate the performance and validate the modifications. The aim is to achieve an improved or tailored design that better meets the desired performance objectives.
Learn more about heat pipes and their optimization here:
https://brainly.com/question/28374929
#SPJ11
Determine the length of the base if the height of a triangle is 28 feet and the area of the triangle is 350 square feet.
Answers
Answer: 25 ft
Explanation:
For a triangle, the area is given by
A = (1/2)base*height
Rearranging,
base = 2A/height
Substituting the given values,
base = 2(350 ft^2)/(28 ft) = 25 ft
During which step of a free-radical chain-growth polymerization does the polymer actually grow or chain extend?.
Answers
During propagation step of a free-radical chain-growth polymerization does the polymer actually grow or chain extend.
What is radical chain-growth polymerization?
The process of free-radical chain growth in polymers. Common free-radical reactions include polymerizations using free-radical mechanisms. The formation of radicals is the initiation, the development of the products is the propagation, and the ending of the free-radical chain reactions is the termination.What distinguishes step growth polymerization from chain growth polymerization?
The polymer chain in chain growth always expands one monomer at a time. The polymer chain doubles with each step of step development. The polymer chain's rate of expansion is drastically different in these two situations as a result. Every coupling step causes chain growth, which causes the chain length to gradually expand.Learn more about radical chain-growth polymerization
brainly.com/question/1033191
#SPJ4
a neural network using a perceptron to distinguish between apples and oranges, based on three sensor measurements (shape, texture and weight). now you are to design a perceptron to distinguish between bananas and pineapples:
Answers
Neural networks are a collection of algorithms that mimic the functioning of an animal brain in order to connect vast amounts of data.
A neural network is a set of algorithms that mimics how the human brain works in order to find hidden connections in a piece of data. Neural networks are systems of neurons that can have an organic or artificial origin in this context.
Since neural networks are capable of adapting to changing input, they can produce the optimal results without having to change the output criterion. The artificial intelligence-based idea of neural networks is quickly gaining favor in the design of trading systems.
Neural networks are a collection of algorithms that mimic the functioning of an animal brain in order to connect vast amounts of data.
As a result, they frequently mimic the synapses and connections between neurons in the brain.
To know more about neural network click here:
https://brainly.com/question/14632443
#SPJ4
A 500mm-long rod has a diameter of 25mm. If an axial tensile load of 50kN is applied to it,please answer the following questions:______.
(a) Will the material undergoyielding? Why or Why not?
(b) Can Hooke’s law be applied to this problem? (Assumethe proportionallimitstress is same with the Yield Strength of the material.)
(c) What is the longitudinalstrain?
(d) What is the lateral strain?
(e) What isthe change in its diameter? (PleaseuseYoung’smodulus E=200GPa, Shear Modulus (or Modulus of Rigidity) G=75.2GPa, and Yield StrengthσY=400????Pa)
Answers
Answer:
(a) Since, the stress is less than the yield strength. Therefore, the material does not go yielding.
(b) Yes
(c) Longitudinal Strain = 5.09 x 10⁻⁴
(d) Lateral Strain = 1.67 x 10⁻⁴
(e) Change in Diameter = 4.2 x 10⁻³ mm = 4.2 μm
Explanation:
(a)
First we calculate stress:
Stress = Force/Area = F/πr²
Stress = 50 KN/π(0.0125 m)²
Stress = 101.86 MPa
Since, the stress is less than the yield strength. Therefore, the material does not go yielding.
(b)
Yes, Hooke's law can be applied to this problem because the material is within elastic limits.
(c)
Longitudinal Strain = Stress/E
Longitudinal Strain = 0.10186 GPa/200 GPa
Longitudinal Strain = 5.09 x 10⁻⁴
(d)
Poisson's Ratio = Lateral Strain/Longitudinal Strain = E/2G - 1
Lateral Strain/Longitudinal Strain = E/2G - 1
Lateral Strain/5.09 x 10⁻⁴ = 200 GPa/2*75.2 GPa - 1
Lateral Strain = 0.33*5.09 x 10⁻⁴
Lateral Strain = 1.67 x 10⁻⁴
(e)
Lateral Strain = Change in Diameter/Original Diameter
Change in diameter = (1.67 x 10⁻⁴)(25 mm)
Change in Diameter = 4.2 x 10⁻³ mm = 4.2 μm
Assertion theory is based on the premise that every person has certain baasic right s
Answers
Answer: wish I could help
Explanation:
simple power system consists of a dc generator connected to a load center via a transmission line. The load power is 100 kW. The transmission line is 100 km copper wire of 3 cm diameter. If the voltage at the load side is 400 V, compute the following: a. Voltage drop across the line Vline b. Voltage at the source side Vsource c. Percentage of the voltage drop Vline /Vsource d. Line losses e. Power delivered by the source f. System efficiency
Answers
Answer:
A. ) 591.7 v
B.) 991.7v
C.) 59.7%
D.) 47.9 Kw
E.) 247925 W
F.) 59.7 %
Explanation:
Given that a simple power system consists of a dc generator connected to a load center via a transmission line. The load power is 100 kW. The transmission line is 100 km copper wire of 3 cm diameter. If the voltage at the load side is 400 V,
Let first calculate the resistance in the wire.
The resistivity (rho) of a copper wire is 1.673×10^-8 ohm metres
Resistance R =( L× rho)/A
Where Area = πr^2 = π × 0.015^2
Area = 0.00071 m^2
R = (100000 × 1.673×10^-8) / 0.00071
Resistance in wire = 2.367 ohms
Then let calculate the resistance in the load.
Also, since Power P = V^2 /R
Make R the subject of formula
R = V^2/ P
R = 400^2/100000
Resistance in load = 1.6 Ohms
Current l = V / R
I = 400/1.6 = 250 Ampere
a.) Voltage drop across the line V line will be achieved by using Ohms law.
V = I R
V = 250 × 2.367
V = 591.7 v
B.) Voltage at the source side Vsource will be
V = V line + V load
V = 400 + 591.7
V = 991.7 v
C.) Percentage of the voltage drop Vline /Vsource
591.7/991.7 × 100 = 59.7%
D.) Line losses
P = I V
P = 250 × 591.7
P = 147925 W
Power loss = 147925 - 100000
Power loss = 47,925 W
Power loss = 47.9 Kw
E.) Power delivered by the source
P = IV
P = 250 × 991.7 = 247925 W
F.) System efficiency
Efficiency = power line / power source × 100
Efficiency = 147925 / 247925 × 100
Efficiency = 59.7 %
In this exercise we have to use the circuit knowledge of an electrical system and calculate the characteristics so we have to:
A. ) 591.7 v
B.) 991.7v
C.) 59.7%
D.) 47.9 Kw
E.) 247925 W
F.) 59.7 %
Organizing the information given in the statement we have that:
power is 100 kW.line is 100 km 3 cm diametervoltage at the load side is 400 VThe resistivity is 1.673×10^-8 ohm metresCalculating the resistivity we find that:
\(R =( L* \rho)/A\\A= \pi r^2 = 0.00071 m^2\\R = (100000 * 1.673*10^{-8}) / 0.00071\\R = 2.367 ohms\)
Then it becomes simpler to calculate the power and current, we have:
\(P = V^2 /R= 1.6 Ohms\\l = V / R = 250 Ampere\)A) With the above information, we can calculate the voltage as:
\(V = I R\\V = 250 * 2.367\\V = 591.7 v\)
B) Now calculating the source voltage, we find that:
\(V = V line + V load\\V = 400 + 591.7\\V = 991.7 v\)
C.) The percentage will be calculated as the division of the two previous values, like:
\(591.7/991.7 * 100 = 59.7\%\)
D.) Like any imperfect circuit, losses occur, so the loss will be calculated as:
\(Power loss = 147925 - 100000\\Power loss = 47,925 W\\Power loss = 47.9 Kw\)
E.) Power delivered by the source, can be:
\(P = IV\\P = 250 * 991.7 = 247925 W\)
F.) System efficiency, will be:
\(Efficiency = power line / power source *100\\Efficiency = 147925 / 247925 * 100\\Efficiency = 59.7 \%\)
See more about circuit at brainly.com/question/3858652
Which characteristic would atoms of a ferromagnetic material have?A. A lack of electrons B. North and south poles C. A temporary magnetic field D. The ability to attract nonmagnetic materials
Answers
Answer:
Option B
Explanation:
Atoms of ferromagnetic materials have north and south pole but these atoms are oriented in random directions due to which they do no exhibit magnetic properties until unless they are brought into influence of any external temporary or permanent magnetic field.
Under the influence of external magnetic force, the atoms of the ferromagnetic material get oriented in a particular direction.
Hence, option B is correct
Technician A says a restricted vacuum feed hose may cause loss of assist after several quick brake applications. Technician B says brake fluid in the vacuum feed hose indicates a leaking master cylinder seal. Who is correct
Answers
Technician A and Technician B are correct in their assessments. A restricted vacuum feed hose can cause loss of Braking assistance after several quick brake applications, and brake fluid in the vacuum feed hose can indicate a leaking master cylinder seal.
Technician A is correct in saying that a restricted vacuum feed hose may cause a loss of assist after several quick brake applications. This is because the vacuum feed hose provides necessary vacuum pressure to the brake booster, which assists in braking. If the hose is restricted, the brake booster may not receive adequate vacuum pressure, leading to a decrease in braking assistance after multiple quick brake applications.
Technician B is also correct in stating that brake fluid in the vacuum feed hose can indicate a leaking master cylinder seal. The master cylinder contains brake fluid and is responsible for converting the driver's input through the brake pedal into hydraulic pressure. A leaking master cylinder seal can allow brake fluid to enter the vacuum feed hose, which is not designed to handle such fluids. This can be an indication that the master cylinder needs repair or replacement.
In conclusion, both Technician A and Technician B are correct in their assessments. A restricted vacuum feed hose can cause loss of braking assistance after several quick brake applications, and brake fluid in the vacuum feed hose can indicate a leaking master cylinder seal.
To learn more about Braking assistance.
https://brainly.com/question/23879105
#SPJ11
An adult has a total of about 22.3 square feet (ft2) of skin. Use the fact that 1 m is approximately equal to 3.281 feet to convert this measurement to square meters (m2).
Answers
Explanation:
1 meter ≈ 3.281 ft.
so,
1 m² = 1m×1m ≈ 3.281 × 3.281 = 10.764961 ft²
now we have 22.3 ft² of skin.
that would be then
22.3/10.764961 = 2.071535605 ≈ 2.1 m² or even more rounded ≈ 2 m²
what cpt code is reported for a complete transurethral electrosurgical resection of the protsate includes a vesectomy
Answers
(CPT) code 52601 is The CPT code reported for a complete transurethral electrosurgical resection of the prostate that includes a vasectomy would depend on the specific circumstances and requirements of the procedure.
What is the CPT code about?The CPT code reported for a complete transurethral electrosurgical resection of the prostate that includes a vasectomy would depend on the specific circumstances and requirements of the procedure. However, it is important to note that a vasectomy is a separate and distinct procedure from a transurethral resection of the prostate (TURP), and should be reported separately.
For the complete transurethral electrosurgical resection of the prostate, the appropriate CPT code would be 52601 (Transurethral electrosurgical resection of prostate, including control of postoperative bleeding, complete (vasectomy, meatotomy, cystourethroscopy, urethral calibration and/or dilation, and internal urethrotomy are included)).
For the vasectomy procedure, the appropriate CPT code would be 55250 (Vasectomy, unilateral or bilateral (separate procedure)).
Learn more about CPT code from
https://brainly.com/question/12596394
#SPJ1
explain five problems faced by communities in kenya
Answers
Answer:
1) Corruption and weak governance
2) pandemic related economic slowdown 3) Weakened consumer spending (leading to rising unemployment and poverty)
4) Lower public investment and fiscal austerity
5) Security
child labor,
HIV/AIDS epidemic,
and an education system in failure
1) I love to swim. 2) A few years ago, my new year's resolution was to become a faster swimmer. 3) First, I started eating better to improve my overall health. 4) Then, I created a training program and started swimming five days a week. 5) I went to the pool at my local gym. 6) To measure my improvement, I tried to count my laps as I was swimming, but I always got distracted and lost track! 7) It made it very hard for me to know if I was getting faster. 8) This is a common experience for swimmers everywhere. 9) We need a wearable device to count laps, calories burned, and other real-time data. Summarey of the story
Answers
Why does a
generally decrease
with increasing
bond energy?
Answers
Answer:
What is the real meaning of this questions
Answer:
what whatwhat whatwhat the town hall meeting at the office in the morning and I can get you a new one for the kids
Hei can someone help me with homework
Answers
The total power derived from the the plate that heats the room, given the temperature in the room would be 2.065 W.
How to find the total power derived ?To calculate the total power radiated from the plate, we'll use the Stefan-Boltzmann law:
P = ε x σ x A x (T_plate^4 - T_room^4)
First, let's convert the temperatures to Kelvin:
Tplate = 79°C + 273.15K = 352.15K
Troom = 22°C + 273.15K = 295.15K
Now, we can plug in the values into the Stefan-Boltzmann law:
P = 0.63 x (5.67 x 10^-8 W/(m^2 x K^4)) x 0.307 m^2 x (352.15^4 K^4 - 295.15^4 K^4)
P ≈ 8.638 x 10^-6 x 239103.81
P = 2.065 W
Find out more on total power at https://brainly.com/question/14274109
#SPJ1
which is a characteristic of synthetic base hydraulic fluid?
Answers
A characteristic of synthetic base hydraulic fluid is that it is made from chemical compounds rather than natural sources. This means that it is more consistent in its composition and performance compared to traditional hydraulic fluids made from mineral oils. Synthetic hydraulic fluids also have superior properties such as higher thermal stability, better resistance to oxidation, and improved cold-weather performance.
Synthetic base hydraulic fluids possess several key characteristics that make them desirable for various applications. Here are some common characteristics of synthetic base hydraulic fluids:
High Temperature Stability: Synthetic hydraulic fluids exhibit excellent thermal stability, allowing them to maintain their performance and viscosity properties even at high temperatures. They can resist thermal degradation and oxidation better than mineral-based fluids, which can break down and form deposits under elevated temperaturesLow Temperature Fluidity: Synthetic hydraulic fluids maintain their fluidity and flow characteristics at low temperatures, ensuring smooth operation in cold environments. They have better cold-start capabilities compared to mineral-based fluids, which can become too viscous and impede proper hydraulic system functioning in cold conditionsEnhanced Lubrication: Synthetic hydraulic fluids offer superior lubrication properties, reducing friction and wear between moving components within hydraulic systems. This characteristic helps to extend equipment life and enhance overall system efficiencyWide Operating Temperature Range: Synthetic hydraulic fluids exhibit a broader operating temperature range compared to mineral-based fluids. They can withstand extreme temperature differentials, from very low to very high temperatures, without compromising their performance or viscosityResistance to Chemical Degradation: Synthetic hydraulic fluids are generally resistant to chemical breakdown, making them compatible with a wide range of hydraulic system materials, seals, and components. They are less likely to react with water, air, or other contaminants, maintaining their stability and effectiveness over extended periodsImproved Oxidation Resistance: Synthetic hydraulic fluids have high resistance to oxidation, which helps to minimize the formation of sludge, varnish, and other deposits within the hydraulic system. This characteristic contributes to cleaner operation and reduces the risk of clogged filters or compromised system performanceReduced Foaming Tendency: Synthetic hydraulic fluids tend to have a lower foaming tendency compared to mineral-based fluids. Foaming can hinder hydraulic system performance and cause air to be entrained in the fluid, leading to reduced efficiency and potential damage to system componentsExtended Service Life: Due to their superior stability and resistance to degradation, synthetic hydraulic fluids generally have an extended service life compared to mineral-based fluids. This characteristic can result in longer fluid change intervals, reduced maintenance requirements, and overall cost savings.To know more about hydraulic fluid, visit the link : https://brainly.com/question/12977724
#SPJ11
what is the equation of yx3 with the given transformations vertical compression by a factor of 17
Answers
The equation of yx3 with the given transformations vertical compression by a factor of 17 is, y = x³ ⇒ y =-1/7(x+8)³
What is transformation?Four distinct ways to modify the position and/or shape of a point, line, or geometric figure are collectively referred to as transformations. The Pre-Image of the object is its initial shape, and the Image, after transformation, is the final shape and location of the object.
Isometry is the name for a transformation that maintains congruence. Alternatively put, a transformation in which the side lengths and angle measurements of the Image and Pre-Image are equal. The isometries of translation, reflection, and rotation. In contrast to reflections and rotations, a translation maintains orientation while also maintaining congruence, which is why it is referred to as a "direct isometry".
Learn more about transformation
https://brainly.com/question/28025572
#SPJ4
Hey guys can anyone list chemical engineering advancement that has been discovered within the past 20 years
Answers
Nanopesticides. The world population keeps growing. ...
Enantio selective organocatalysis. ...
Solid-state batteries. ...
Flow Chemistry. ...
Porous material for Water Harvesting. ...
Directed evolution of selective enzymes. ...
From plastics to monomers. ...
5. Tantalum is not used in services where its corrosion rate exceeds 10 mpy (even though such a rate may be economically justified). Why? 6. Identify ions in hydrochloric acid that are destructive to zirconium. 7. Teflon (polytetraflurethylene) has been termed as ""superplastic"". What is speical about this material in terms of corrosion?
Answers
Teflon is highly resistant to a wide range of chemicals, including acids and bases, making it an excellent material for use in corrosive environments, while chloride ions can cause pitting corrosion in zirconium and a corrosion rate of over 10 mpy for Tantalum would not be sustainable in the long term.
What are some corrosion-related properties and considerations for Tantalum, Zirconium, and Teflon?
Tantalum is not used in services where its corrosion rate exceeds 10 mpy because at that rate, the metal would deteriorate too quickly, leading to failure of the equipment or system in which it is being used.Even though such a corrosion rate may be economically justified in the short term, it would not be sustainable in the long term.
Teflon (polytetrafluoroethylene) is termed as "superplastic" because it is highly deformable and can be molded into complex shapes without losing its mechanical properties.
In terms of corrosion, Teflon is highly resistant to a wide range of chemicals, including acids and bases, making it an excellent material for use in corrosive environments. Its non-stick properties also make it easy to clean, which can help to prevent corrosion from building up over time.
Learn more about Tantalum
brainly.com/question/24198197
#SPJ11
Select the lightest wide-flange shape that will safely support the loading with a factor of safety of 1.3 if the beam is made of 2014-T6 aluminum.
Answers
To find the lightest wide-flange shape that will safely support the loading with a factor of safety of 1.3, we need to know the loading conditions and the span of the beam.
Assuming a uniformly distributed load and a simply supported beam, we can use the following formula to calculate the maximum moment the beam will experience:
Mmax = (wL^2)/8
Where w is the uniformly distributed load per unit length, and L is the span of the beam.
Once we have calculated the maximum moment, we can use the bending stress formula for a rectangular cross-section to determine the required section modulus:
Sreq = Mmax / (σb * y)
Where σb is the allowable bending stress for the material, and y is the distance from the neutral axis to the extreme fiber.
For 2014-T6 aluminum, the allowable bending stress is typically around 24 ksi (165 MPa).
Assuming a standard flange thickness and web height, we can then look up the section modulus of various standard aluminum wide-flange shapes in a steel manual or online database. We can select the lightest wide-flange shape that has a section modulus equal to or greater than the required section modulus.
It's important to note that this is a simplified approach and that there may be additional factors to consider depending on the specific loading conditions and design requirements. It is always best to consult with a licensed professional engineer for detailed design calculations and recommendations.
Learn more about lightest wide-flange shape from
https://brainly.com/question/31428604
#SPJ11
In the shop which of these indicates caution?
A: Red Light
B: Orange Light
C: Yellow Light
D: Green Light
Answers
Answer:
Yellow light
Explanation:
The flashing yellow light means: "proceed with caution." Traffic facing the yellow light has the right-of-way, but oncoming traffic usually also has a flashing yellow light, and cross-traffic will have a flashing red light.
YELLOW—A yellow signal light warns you that the red signal is about to appear. When you see the yellow light, you should stop, if you can do so safely. If you can't stop, look out for vehicles that may enter the intersection when the light changes. FLASHING YELLOW— What does a flashing yellow light mean?
Hope this helped! Have a nice day!
Please give Brainliest when possible!
:3
What unit of electricity is used as a signal for a computer?
Answers
Answer:
A power supply unit (PSU) converts mains AC to low-voltage regulated DC power for the internal components of a computer. Modern personal computers universally use switched-mode power supplies
Answer:
Volt is the SI (Standard International) unit of electrical potential of the..
Explanation:
tech a says the best way to ensure the torque converter is engaged fully into the pump is to strike the rear of the torque converter with a a hammer in three places. tech b says that the torque converter requires an alignment tool when installing it in the transmission. who is right?
Answers
Tech A exists right. Transmission mode refers to the process of moving data from one device to another.
What is meant by transmission?Actually, the act of transmitting involves sending and spreading analog or digital information impulses. Transmission technology primarily refers to responsibilities associated with physical layer protocols, such as line coding, demodulation, and modulation.
The movement of data from one digital device to another is known as data transmission. Through point-to-point data streams or channels, this transmission is carried out.
Transmission mode refers to the process of moving data from one device to another. The communication mode is another name for the transmission mode. Each communication channel has a direction that goes with it, and the direction is provided by the transmission medium.
To learn more about transmission refer to:
https://brainly.com/question/14280351
#SPJ4
stairs ladders or ramps are required at an elevation break of ___ or more
Answers
Stairs, ladders, or ramps are required at an elevation break of 19 inches or more.
This is to ensure the safety of those who use the facility, particularly people with disabilities. If there is a level change of more than 19 inches, it is suggested that a ramp or elevator be installed to make it more accessible. Ramps, ladders, and stairs are vital components of any building or construction that has an elevation break of 19 inches or more. Their function is to offer a secure and convenient way of accessing various floors within a facility, whether it's a residential or commercial structure.
The Americans with Disabilities Act (ADA) has laws that ensure that facilities are built to be accessible to individuals with disabilities. For instance, they provide guidelines on the minimum width of a ramp or the steepness of the stairs. This is to ensure that individuals who use a wheelchair or walker can easily navigate the building. If a building has an elevation break of more than 19 inches, then it is required to have a ramp that meets the guidelines of the ADA. This will make it easier for individuals with disabilities to move from one floor to the next.
Moreover, if the building is relatively large and has multiple floors, an elevator is recommended. The elevator will ensure that people with disabilities can quickly move around the building without any issues. In conclusion, stairs, ladders, or ramps are required at an elevation break of 19 inches or more. The ADA guidelines ensure that individuals with disabilities have access to all parts of the building. They stipulate the minimum width, height, and slope of a ramp, as well as the steepness of the stairs. When designing a building, it is crucial to consider these guidelines to make the facility accessible to all.
Know more about the Americans with Disabilities Act (ADA) here :
https://brainly.com/question/29564392
#SPJ11
Stairs, ladders, or ramps may be required at certain elevation breaks to ensure safe access between different levels.
Explanation:In physics, when there is a change in elevation, stairs, ladders, or ramps may be required to provide a safe means of accessing different levels. The specific elevation break at which one of these options is required depedependsnds on various factors, such as the height and angle of the change in elevation, as well as any applicable building codes or regulations. For example, building codes may require the use of stairs for elevation breaks of a certain height, but ramps may be required for breaks above a certain threshold that accommodate individuals with mobility impairments.
Learn more about elevation breaks here:https://brainly.com/question/35572262
The purpose of the Daily Scrum questions _____________________________, so they can help identify problems with the current plan that need to be fixed.
Answers
The Daily Scrum questions serve a critical purpose in Agile methodology. These questions are designed to facilitate communication among team members and to help identify problems with the current plan that need to be fixed.
The Daily Scrum is a time-boxed event that occurs every day during a Sprint in which the team meets for a maximum of 15 minutes. During this time, the team members answer three questions: What did you do yesterday? What will you do today? Are there any obstacles in your way?The purpose of these questions is to provide a regular check-in and to ensure that everyone is on the same page regarding the progress of the project. By answering these questions, team members can share updates on their work, identify any potential issues or roadblocks, and discuss solutions to overcome them. This communication helps to ensure that everyone is working towards the same goal and that the project is progressing as planned.Furthermore, by discussing any obstacles that may be impeding progress, the team can work together to find solutions and implement necessary changes to the plan. This promotes continuous improvement and allows the team to adapt to changing circumstances, which is crucial in Agile methodology.
To know more about Scrum visit:
brainly.com/question/14582692
#SPJ11
What type of switches shut off the flow of electricity immediately when they sense that the electrical current might no longer be flowing along the correct path?.
Answers
Circuit Breakers or Fuses: A circuit breaker is a switching device in a circuit that interrupts an irregular flow of current.
It uses an internal system of bounds or compact air to sense any changes in the current flow. It will 'break' the circuit open and cut the flow of current.
What component controls the flow of electricity by turning it on and off?
The breakers or switches handle the electricity. If too many devices on the same circuit are employed at the same time, an overload may occur. If there is an overload of electricity in any of the courses of the home, the breaker will open the course to stop the flow of electricity.
What switches are operated by humans to control power flow to outputs?
Hand switches are actuated by human touch. Limit controls are actuated by machine motion.
To learn more about Circuit Breakers, refer
https://brainly.com/question/28021068
#SPJ4
Optical discs store data using tiny pits and lands burned by a laser.
T / F
Answers
False. Optical discs store data using tiny pits and lands created by a laser, not burned. The laser beam alters the reflective properties of the disc's surface to encode the data.
Optical discs, such as CDs, DVDs, and Blu-ray discs, are created with a reflective layer and a protective layer on top. To store data on an optical disc, a laser beam is used to create microscopic pits and lands on the reflective layer. The laser focuses on specific areas of the disc, heating them to change their optical properties. The areas heated by the laser become the pits, while the unheated areas remain as lands.
When the disc is read, a laser beam is directed onto the surface, and a sensor detects the changes in reflection caused by the pits and lands. The sensor translates these changes into digital data that can be interpreted by a device, such as a CD or DVD player.
The pits and lands on an optical disc are arranged in a spiral track or concentric circles, forming a continuous sequence of data. By varying the length and spacing of the pits and lands, different patterns are created to represent the encoded data. This allows optical discs to store various types of information, including audio, video, and computer data.
Hence, optical discs use lasers to create pits and lands on a reflective surface, rather than burning the data onto the disc. This technique enables the discs to store and retrieve data accurately and reliably.
To learn more about laser Click Here: brainly.com/question/27853311
#SPJ11