Constants: ks = 1.3806x10-23 J/particle-K; NA=6.022x102): 1 atm =101325 Pa 1. Nitrogen molecules have a molecular mass of 28 g/mol and the following characteristic properties measured: 0,2 = 2.88 K. 0,6 = 3374 K, 0), = 1, and D. = 955.63 kJ/mol. Its normal (1 atm.) boiling point is Tnb=-195.85 °C (77.3 K). (a) (25 pts) Estimate the thermal de Broglie wavelength and molar entropy of N; vapor at its T. (b) (20 pts) Liquid N2 has a density of 0.8064 g/cm' at its Tob. If it is treated by the same method as (a) for vapor and assuming the intramolecular energy modes to be un affected, calculate the resultant Agup and AP = TAS (C) (15 pts) The experimental value of Na's AĤ** at its Tos is 6.53 kJ/mol. What correction(s) would be needed for (b) to produce the actual ?
Answers
The thermal de Broglie wavelength of Nitrogen vapor can be estimated using the following relation:λ = h/ (2πmkT) Where, h is Planck’s constant, m is the molecular mass of the gas, and T is the temperature.
Using the given values we have;
\(λ = h/ (2πmk T)λ = (6.626x10^-34 J.s) / [2πx(28x(1.66x10^-27)\)
\(kg)x(2.88 K)]λ = 3.25x10^-11 m\)
The molar entropy of N2 vapor can be calculated using the following formula:
\(S° = (3/2)R + R ln (2πmk T/h2) + R ln (1/ν)\)
Where, R is the gas constant,ν is the number of particles, and the remaining terms have their usual meaning. Using the given values, we have;
\(S° = (3/2)R + R ln (2πmk T/h2) + R ln (1/ν)S° = (3/2)(8.314 J/mol. K) + 8.314\)
\(ln [2πx(28x(1.66x10^-27) kg)x(2.88 K) / (6.626x10^-34 J.s)2] + 8.314\)
\(ln (1/6.022x10^23)S° = 191.69 JK^-1mol^-1\)
The molar volume of Nitrogen at Tnb is given by;
\(Vnb = (RTnb/Pnb) = [(8.314 J/mol.K)x(77.3 K)] / [101325 Pa]\)
\(Vnb = 6.14x10^-3 m^3/mol\)
The density of liquid Nitrogen at Tob is given by;
\(ρ = m/VobWhere,m is the mass of Nitrogen in 1 m^3.\)
\(m = ρVob = (0.8064 kg/m^3) x (2.116x10^-4 m^3) = 0.000171 kg\)
The actual value of Na's AĤ would be obtained by adding the value obtained from (b) to the calculated value of ΔHvap°.
To know more about wavelength visit:
https://brainly.com/question/31143857
#SPJ11
Related Questions
An aluminum block weighing 28 kg initially at 140°C is brought into contact with a block of iron weighing 36 kg at 60°C in an insulated enclosure. Determine the final equilibrium temperature and the total entropy change for this process. The specific heat of aluminum at 400 K is cp = 0.949 kJ/kg·K. The specific heat of iron at room temperature is cp = 0.45 kJ/kg·K.
Answers
Answer:
The equilibrium temperature is 109.7°C
The total entropy change for the process is 0.23 kJ/K
Explanation:
The parameters given are;
The initial temperature of aluminium, T₁ₐ = 140°C = 413.15 K
Mass, m₁, of aluminium block = 28 kg
The specific heat of aluminium, c₁, at 400 K = 0.949 kJ/(kg·K)
The initial temperature of iron, T₁ₙ = 60°C = 333.15 K
Mass, m₂, of iron block = 36 kg
The specific heat of iron, c₂, at room temperature = 0.45 kJ/(kg·K)
The heat lost by the aluminium = Heat gained by the iron
The heat lost by the aluminium = m₁ × c₁ × (T₁ₐ - Tₓ)
The heat lost by the aluminium = 28 × 0.949 × (413.15 - Tₓ)
The heat gained by the iron = m₂ × c₂ × (Tₓ - T₁ₙ)
The heat gained by the iron = 36 × 0.45 × (Tₓ - 333.15)
Hence;
28 × 0.949 × (413.15 - Tₓ) = 36 × 0.45 × (Tₓ - 333.15)
26.572 × (413.15 - Tₓ) = 16.2 × (Tₓ - 333.15)
∴ (26.572 + 16.2) × Tₓ = 26.572 × 413.15 + 16.2 × 333.15
42.772·Tₓ = 16375.2518
Tₓ = 382.85 K = 109.7°C
The total entropy change of the process is given by the following relation;
\(\Delta S = \Delta S_{Fe} + \Delta S_{Al}\)
\(=m_{1}c_{1}ln\dfrac{T_{x}}{T_{1n}}+m_{2}c_{2}ln\dfrac{T_{x}}{T_{1a}}\)
\(=28 \times 0.949 \times ln\dfrac{382.85}{413.15}+36 \times 0.45 \times ln\dfrac{382.85}{333.15} = 0.23 \, \dfrac{kJ}{K}\)
which of the following documents instructs firefighters regarding the size and capacity of a building's standpipe systems and the pumps supplying those systems?
Answers
The documents that instruct firefighters regarding the size and capacity of a building's standpipe systems and the pumps supplying those systems are called: "Fire department Preplan.
What is a Fire department Preplan?A fire pre-plan is a scenario-based plan that is tailored to a specific process area or piece of equipment. The site emergency response plan should include a reference to all fire pre-plans. They should explain how to utilize the fire prevention and emergency response systems in certain fire case situations.
Items that should be included in a pre-plan include:
Building plan and design specifications, such as fire-rated walls, doors, and windowsFloor layouts for every level of the building.Alarm systems and fire suppression systemsLocation and information about hydrantsThe fire service's management principles include discipline, division of work, unity of command, and line of authority. Building codes control the materials used in building. It is valuable to explore the past and present fire service.
Learn more about firefighters;
https://brainly.com/question/1023064
#SPJ1
Create a script file that asks the user to input the number of rows, number of columns, and a constant integer value (may be negative, zero or positive) and then creates the matrix.
Use a user-defined function to obtain the input. Check that the number of rows and number of columns is between 1 and 8 inclusive [1:8], and that the constant value IS an integer. Give the user another chance if they enter an illegal value, do not just shut down the program. You can either put the user function in the body of the main script file or create a separate file and submit it at the end of the exam in one of the fake questions. Check your program for these 2 cases:
2 rows, 4 columns, value of -77
2 rows, 6 columns, value of 13
Answers
Answer:
def script_input():
chances = 2
while chances > 0:
global rows
global columns
global constant
rows = int(input("Enter the number of rows: "))
columns = int(input("Enter the number of columns: "))
constant = int(input("Enter the constant: "))
if rows > 0 and rows <= 8 and columns > 0 and columns <= 8 and \
isinstance(constant, int):
chances -= 2
else:
chances -= 1
script_input()
print(f"{rows} rows, {columns} columns, value of {constant}")
Explanation:
The python script defines a function that gets the user input of row, column and constant value variables, then the script prints out the number of rows and columns for the matrix to be created.
Which number is equivalent to the decimal number 149?
A.
11011011
B.
100101012
C. 001001112
D. 101010012
Answers
Answer:
letter B
Explanation:
basta yan anwer
Recent research has identified mold-surface textures that will either (a) inhibit a solidified steel from separating from the mold or (b) force it to stay in contact in continuous casting. What is the advantage of a mold that maintains intimate contact with the steel
Answers
Answer:
faster heat conduction
Explanation:
The advantage of mold that maintains intimate contact with the material is that thermal contact resistance between the two is going to be reduced. That is, it would be lower.
Consequently, what would be happening would be heat getting conducted faster, this would then allow for higher traverse speeds or it could allow for the usage of shorter molds.
Masonry veneer curtain walls:
a) are supported from below.
b) are hung from above.
c) have weep holes at the shelf angles.
d) do not need wall ties.
e) a and c.
f) b and d.
Answers
Curtain wall typically fastens to the exterior of the floor slabs, acting as a "curtain" that is actually draped on the building and is not load bearing.
What are the types of curtain walls?Masonry veneer walls are composed of a single, exterior, non-structural layer that is commonly built of brick, stone, or artificial stone. The term "anchored veneer" refers to masonry veneer that may have an air space underneath it. Adhered veneer is masonry that has been adhered directly to the backing.
Although it is connected to the building structure, the framing is not responsible for supporting the building's floor or roof loads.
In general, stick curtain wall and unitized curtain wall are the two primary types of curtain wall systems. Although they share a similar look, the two are produced in distinct ways and are better suited to particular projects.
Curtain wall typically fastens to the exterior of the floor slabs, acting as a "curtain" that is actually draped on the building and is not load bearing. Systems are most frequently built in and span from slab to slab.
Therefore the correct answer is option e) a and c.
To learn more about Masonry veneer refer to:
https://brainly.com/question/4506535
#SPJ4
Following data refers to the years of service (variable x) put in by seven
specialized workers in a factory and their monthly incomes (variable y). x
variable values with corresponding y variable values can be listed as: 11 years of
service with income 700, 7 years of service with income 500, 9 years of service
with income 300, 5 years of service with income 200, 8 years of service with
income 600, 6 years of service with income 400, 10 years of service with
income 800. Regression equation y on-x is
Select one:
ay=3/4x+1
by=4/3x-1
y=3/4x-1
dy-1-3/4x
Answers
Based on the data given, the regression equation y on-x is y = 3/4x + 1.
The regression equation that represents the relationship between the years of service (x) and monthly incomes (y) for the specialized workers in the factory can be determined by analyzing the given data points. By examining the data, we can observe that the monthly income increases as the years of service increase. Calculating the regression equation using the given data, we find that the equation that best fits the relationship is:y = (3/4)x + 100
This equation indicates that for every increase of 1 year in service, the monthly income increases by 3/4 (0.75) units. The constant term of 100 represents the base income level. Therefore, the correct option from the given choices is ay = (3/4)x + 1.For more such questions on Regression:
https://brainly.com/question/14230694
#SPJ8
Hãy tính phản lực liên kết tại ngàm A, bản lề C và gói di động D biết p=400N/m
P1=100N
P2=200
P3=300
M1=100N/m
N2=200N/m
Answers
Answer:
say in English plz I don't understand
Discuss your interpretation of the confidence-precision trade-off, and provide a few examples of how you might make a choice in one direction or the other in an engineering situation.
Answers
The given question is incomplete, the complete question is as follows:
Our text describes a trade-off that we must make as engineers between our confidence in the value of a parameter versus the precision with which we know the value of that parameter. That trade-off might be affected by whether we are looking at a two-sided or bounded (one-sided) interval.
Question: Discuss your interpretation of the confidence-precision trade-off, and provide a few examples of how you might make a choice in one direction or the other in an engineering situation.
Answer: A balancing point is required to be reached to obtain a better confidence level in the predicted values.
Explanation:
The confidence interval and precision are the two terms that aims at providing the accurate estimation of the measurability of an object. If the precision increases, we can compromise on the confidence level and if the confidence level increases, then the precision of the predicted value also dilutes.
Thus a balance point is required to be reached between these two variables so that we get better confidence in the values being predicted without losing the correct estimation on precision. Ensuring that both the confidence and precision are maintained.
Can be used to eliminate rubbing friction of wheel touching frame. 1.Traction 2.Thrust washer
Answers
Answer:
thrust washer
can be used to eliminate rubbing friction of wheel touching frame
what is Geography? pliz help
Answers
Answer:
hope it's helpful please like and Follow me
Answer:
Geography is the science that studies and describes the surface of the Earth in its physical, current and natural aspect, or as a place inhabited by humanity.
What is the mode of operation of a ramp digital voltimeter
Answers
Answer:
The operating principle of a ramp type digital voltmeter is to measure the time that a linear ramp voltage takes to change from level of input voltage to zero voltage (or vice versa).
If side A has a length of 18.5 ft and side B has a length of 28 ft, what is the length of the hypotenuse?
Answers
Answer:
the answer should be about 33.56fts
The length of the hypotenuse will be 33.55 feet in the given triangle.
What is Pythagoras's theorem?Pythagoras's theorem states that in a right-angled triangle, the square of one side is equal to the sum of the squares of the other two sides.
The triangle given in the question is a right triangle.
In a triangle side A has a length of 18.5 ft and side B has a length of 28 ft
A right triangle is represented as a triangle in which one angle is a right angle or two sides are perpendicular.
To determine the length of the hypotenuse.
According to Pythagoras's theorem,
a² + b² = c²
Here a = 18.5 and b = 28
The length of the hypotenuse is c.
(18.5)² + (28)² = c²
342.25 + 784 = c²
c² = 1126.25
c = 33.55
Therefore, the length of the hypotenuse will be 33.55 feet.
Learn more about Pythagoras's theorem here:
brainly.com/question/343682
#SPJ2
A 1.2 newton block is dropped A 1.2 Newton block is dropped downward from a tall cliff. What is the magnitude and direction
of the force of air friction on the block when it reaches its terminal velocity?
1.2 newtons upward
1.2 newtons downward
0.12 newtons upward
0.12 newtons downward
Answers
Answer:
1.2 Newtons upwards
Explanation:
because the friction is opposite of the magnitude.
technician a says a torsion bar is a type of shock absorber. technician b says shock absorbers slow the upward and downward movement of the vehicle after a bump. who is correct?
Answers
A torsion isn't part of the shock absorber. Hence, technician A is wrong and technician B is correct.
The suspension system allows the wheel to up and down over bumps in the road. The suspension system makes the wheels and tires to up and down to absorb the shock from bumps. The rubber tires and air in the tires also slow down the ride over hard surfaces and conform to slightly uneven and rough surfaces. Thus, technician B is correct. Meanwhile, the technician A is wrong because a torsion isn't kind of shock absorber.
Kind of shock absorbers are:
Standard telescopic shocks. Struts. Spring seat.Learn more about shock absorbers, here https://brainly.com/question/10838031
#SPJ4
Which team made pies at a rate of 4.5 per hour
Answers
Answer:
Pie piece?? i think
Explanation:
What unit of measurement do the sketches use?
Answers
Answer:
The sketches isn't showing
Explanation:
A jointed arm robot can rotate on the following 6 axes?
Answers
Answer:
-x, +x, -y, +y, -z, +z
Explanation:
These are the 6 axes
"An electric power distributor charges residential customers $0.08 per kilowatt-hour (kWh). The company advertises that ""green power"" is available in 145 kWh blocks for an additional $3.50 per month. (green power is generated from solar, wind power and methane sources.) If a certain customer uses an average of 400 kWh per month and commits to one monthly 150 kWh block of green power, what is her annual power bills?
What is the average cost per kWh with green power during the year? why does green power cost more than conventional power?
Answers
The annual power bill for this customer would be $1,076. This includes the cost of 400 kWh per month at $0.08 per kWh, plus 12 monthly blocks of 145 kWh green power at an additional cost of $3.50 per month.
The average cost per kWh with green power during the year would be $0.087 per kWh. This is calculated by the sum of monthly cost of 400 kWh at $0.08 per kWh, plus the 12 monthly blocks of 145 kWh green power at an additional cost of $3.50 per month, and dividing by the total number of kilowatt-hours used during the year (400 + 145 = 545).
There are a few factors that could make green energy more expensive than traditional energy. First, compared to conventional power, the infrastructure for producing and delivering green energy is frequently more expensive. Second, suppliers can charge more since there is frequently a greater demand for green energy than for conventional energy.
Green power is defined as electricity generated from renewable energy sources similar as solar, wind, geothermal, biogas, eligible biomass, and low- impact small hydroelectric sources.
Therefore, green power may be more expensive than conventional power due to government incentives or regulations.
To learn more on green power, here:
https://brainly.com/question/31914861
#SPJ4
1.What is three phase? why it is needed?
2. What is the condition to be balanced? Write down voltage equation of a balanced 3 phase voltage source and draw their phasor diagram.
Answers
1. We can see here that three phase refers to a type of electrical power transmission that uses three alternating current (AC) waveforms that are 120 degrees out of phase with each other. This is different from single-phase power transmission, which uses only one AC waveform.
What is voltage?Voltage, also known as electric potential difference, is a measure of the electrical potential energy per unit of charge in an electrical circuit. It is defined as the amount of work required to move a unit of electric charge between two points in a circuit, typically measured in volts (V).
Three-phase power is needed because it allows for more power to be transmitted over a given amount of wire or cable. With three-phase power, the power is delivered in a more consistent manner, which means that there is less voltage drop over long distances.
2. In order for a three-phase system to be balanced, the three phases must have the same amplitude and be 120 degrees out of phase with each other. The voltage equation of a balanced three-phase voltage source is given by:
Vph = Vline / √3
where Vph is the phase voltage and Vline is the line voltage. The phasor diagram for a balanced three-phase system shows three sinusoidal waveforms that are displaced by 120 degrees from each other.
Learn more about voltage on https://brainly.com/question/27861305
#SPJ1
The required system for an office building over 75' but less than 100' is:
A. Mini-E with public address to each floor
B. Full modified E system.
C. Mini-E without central office connection.
D. Coded interior alarm system.
Answers
The required system for an office building over 75' but less than 100' is typically a Full modified E system.
This is a system that is designed to provide fire protection for the entire building, including public areas such as stairwells and corridors, as well as individual offices and workspaces. The system includes fire alarms and sprinklers, and is designed to meet the specific needs of the office environment. While other options such as Mini-E with public address to each floor or a coded interior alarm system may also be appropriate for certain types of buildings, a Full modified E system is typically the best choice for an office building of this size.
To know more about Full modified E system
https://brainly.com/question/12592073?
#SPJ11
Where would an engineer indicate the unit of measurement used in a design
Answers
An engineer would indicate the unit of measurement used in a design in millimeters.
What are measurements?The primary unit of measurement is the stocking unit of measure for a given item in a specific organization. You must define an item attribute that serves as the primary unit of measurement when creating each item.
Because the technical drawings are scaled, engineers, architects, and builders may create the items according to exact specifications.
When understanding scales, the number on the left relates to the measurement of the drawing, while the number on the right represents the actual size of the object.
Therefore, a millimeter is used in a design.
To learn more about measurements, refer to the link:
https://brainly.com/question/28390923
#SPJ1
2. The Federal Motor Carrier Safety Regulations (FMCSRs) establish basic safety rules
and standards for:
A. drivers and other employees of motor carriers.
B. motor carriers.
C. commercial motor vehicles (CMVS).
D. all of the above.
Answers
if you put on a sock inside out is everyone else but you wearing the sock
Answers
The top answer is correct
A firm is considering the purchase of a new machine to increase the output of an existing production process. Of all the machines considered, the management has narrowed the field to the machines represented by the cash flows shown as follows: Machine 1. Initial Investment (-$50,000). Annual Operating Income ($22,815)). [Machine 2 Initial Investment (-$60,000) . Annual Operating Income($25,995)) (Machine 3 (-$75,000). Annual Operating Income ($32,115)) (Machine 4 (-$80,000), Annual Operating Income ($34,371) Machine 5 ($100,000), Annual Operating Income (542,485)) If each of these machines provides the same service for 3 years and the minimum attractive rate of return is 12% which machine should be selected? (Hint: Choose the Machine that will provide the greatest income.) a. Machine 1 b. Machine 3 c. Machine 2 d. Machine 4 e. Machine 5
Answers
A production process is a way to use economic resources, such as labour, expensive machinery, or land, to create goods and services for customers.
Thus, The manufacturing process often deals with how to make things for sale efficiently and productively so that customers may get them quickly without sacrificing the product's quality or production.
Organizations can employ a variety of production techniques depending on their manufacturing goals, production numbers, and technology tools or software systems.
A critical aspect of a manufacturing manager's job is making broad-based production decisions that affect the productivity levels of product creation and sales.
Thus, A production process is a way to use economic resources, such as labour, expensive machinery, or land, to create goods and services for customers.
Learn more about Production process, refer to the link:
https://brainly.com/question/31782432
#SPJ4
what is the condition for sampling frequency to reconstruct the information signal ?
Answers
A continuous time-varying 1-D signal is sampled by narrow sampling pulses at a regular rate fr = 1/T, which must be at least twice the bandwidth of the signal. At first, it may be somewhat surprising that the original waveform can be reconstructed exactly from a set of discrete samples.
14. Low resistance combined with current flow is the description of a/an
A. heater
B. impedance mismatch.
C. electric shock.
D. electrical circuit.
Answers
Find the discharge Q through a 12 inch diameter round pipe discharging freely. The water surface elevation is 110.87’ and the elevation at the center of the orifice is 100.68’.
Find the discharge Q through a 8 inch diameter round pipe discharging freely. The water surface elevation is 400.00’ and the depth to the top of the pipe is 94".
Find the discharge Q of a V notch weir that has Θ is 45® and the H (height of water) is 3.35 inches.
Find the discharge Q of a rectangular weir that has a length (L) of 3 ft and a head above crest (H) of 6".
Answers
Find the discharge Q through a 12 inch diameter round pipe discharging freely. The water surface elevation is 110.87’ and the elevation at the center of the orifice is 100.68’.
Find the discharge Q through a 8 inch diameter round pipe discharging freely. The water surface elevation is 400.00’ and the depth to the top of the pipe is 94".
Find the discharge Q of a V notch weir that has Θ is 45® and the H (height of water) is 3.35 inches.
Find the discharge Q of a rectangular weir that has a length (L) of 3 ft and a head above crest (H) of 6".,
Diameter of round pipe, D = 12 inchWater surface elevation, Z1 = 110.87 feetCenter elevation, Z2 = 100.68 feetTo find, Discharge Q of round pipe for freely discharging.In general, Discharge of fluid can be calculated as,Q = (π/4) × D² × Cc × √(2g) × (H)^(3/2)Where, D = Diameter of the pipeCc = Coefficient of dischargeg = acceleration due to gravityH = Depth of fluidLet's calculate values of g and H first.g = 32.2 feet/s² (acceleration due to gravity)H = Z1 - Z2 = 110.87 - 100.68 = 10.19 feetNow, Diameter of pipe, D = 12 inches = 1 feetCc = 0.61 (For freely discharging)Q = (π/4) × D² × Cc × √(2g) × (H)^(3/2)Q = (π/4) × (1)² × 0.61 × √(2×32.2) × (10.19)^(3/2)Q = 62.46 cubic feet per second.Now, Given, Diameter of round pipe, D = 8 inch = 2/3 feetWater surface elevation, Z1 = 400.00 feetDepth to the top of the pipe, h = 94 inches = 7.83 feetNow, Depth of fluid, H = Z1 - h = 400.00 - 7.83 = 392.17 feetCc = 0.62 (For freely discharging)Q = (π/4) × D² × Cc × √(2g) × (H)^(3/2)Q = (π/4) × (2/3)² × 0.62 × √(2×32.2) × (392.17)^(3/2)Q = 19.26 cubic feet per second.Given, H (height of water) = 3.35 inches = 0.28 feetΘ = 45°Now, Discharge Q of V notch weir can be calculated as,Q = 2/3 × Cd × Cc × b × √(2g) × (H)^(5/2) / tan(Θ/2)Where, Cd = Coefficient of dischargeCc = Coefficient of contractiong = acceleration due to gravityb = breadth of notchH = Height of water tan(Θ/2) = tan(45°/2) = 1Let's calculate values of Cd, Cc, and b first.Cd = 0.62 (for V notch weir)Cc = 0.61 (for V notch weir)b = 2.82 inches = 0.235 feetNow, Discharge Q of V notch weir can be calculated as,Q = 2/3 × Cd × Cc × b × √(2g) × (H)^(5/2) / tan(Θ/2)Q = 2/3 × 0.62 × 0.61 × 0.235 × √(2×32.2) × (0.28)^(5/2) / 1Q = 0.517 cubic feet per second.Now, Given length of rectangular weir, L = 3 feetHead above crest of rectangular weir, H = 6 inches = 0.5 feetNow, Discharge Q of rectangular weir can be calculated as,Q = Cc × L × H^(3/2)Where, Cc = Coefficient of contractionCc = 0.61 (for rectangular weir)Q = Cc × L × H^(3/2)Q = 0.61 × 3 × (0.5)^(3/2)Q = 0.818 cubic feet per second.Answer:Discharge Q of 12-inch diameter round pipe discharging freely = 62.46 cubic feet per second.Discharge Q of 8-inch diameter round pipe discharging freely = 19.26 cubic feet per second.Discharge Q of V notch weir having Θ is 45° and the H (height of water) is 3.35 inches = 0.517 cubic feet per second.Discharge Q of rectangular weir having a length (L) of 3 ft and a head above crest (H) of 6" = 0.818 cubic feet per second.
To learn more about length visit the link- brainly.com/question/32232199
#SPJ11
1. Why is the perfect elastic-plastic model adopted in steel design?
Answers
Answer:
Explained below
Explanation:
Perfect Elastic Plastic in steel design is simply a method whereby the structural members are selected using the criteria of the overall ultimate capacity of the system. However, when safety is considered, the applied loads are usually increased by factors of safety as prescribed in the relevant steel design codes. Therefore, this model of design is just based on the yield capacity of the steel.
Let x[n]=u[n-2]-u[n-9]. Sketch the result of convolving x[n] with each of the following signals: h[] = a[n]- [T – 4] h2 [n] = 8[n] – 8[n – 1]
Answers
A. For each value of n within the range 2 to 9, calculate the convolution using the given values of x[n] and h1[n]. b. For each value of n within this range, calculate the convolution using the given values of x[n] and h2[n].
To sketch the result of convolving x[n] with each of the given signals, we need to perform the convolution operation.
Given: x[n] = u[n-2] - u[n-9]
a) Convolution with h1[n] = a[n] - [T - 4]:
The convolution operation is denoted by "*" and can be written as:
y1[n] = x[n] * h1[n]
To perform the convolution, we need to consider the range of indices where the sequences overlap. In this case, since x[n] has non-zero values from n = 2 to n = 9 and h1[n] is non-zero for all values of n, the convolution will cover the range from n = 2 to n = 9.
Using the definition of convolution:
y1[n] = ∑[k=-∞ to ∞] x[k] * h1[n - k]
For each value of n within the range 2 to 9, calculate the convolution using the given values of x[n] and h1[n].
b) Convolution with h2[n] = 8[n] - 8[n-1]:
Similarly, we perform the convolution using the definition:
y2[n] = x[n] * h2[n]
Again, consider the range of indices where the sequences overlap, which is from n = 2 to n = 9.
For each value of n within this range, calculate the convolution using the given values of x[n] and h2[n].
Plot the resulting sequences y1[n] and y2[n] on a graph to sketch the convolution results. The y-axis represents the amplitude or value of the resulting sequence, and the x-axis represents the index n.
Please note that the specific values of "a" and "T" are not provided in the question. To obtain a complete sketch, substitute appropriate values for "a" and "T" in the respective convolution equations.
To learn more about convolution
https://brainly.com/question/31959197
#SPJ11