Consider the following ways of handling deadlock:
(1) banker’s algorithm,
(2) detect deadlock and kill thread, releasing all resources,
(3) reserve all resources in advance,
(4) restart thread and release all resources if thread needs to wait,
(5) resource ordering, and
(6) detect deadlock and roll back thread’s actions.
b) Another criterion is efficiency; in other words, which requires the least processor overhead. Rank order the approaches from 1 to 6, with 1 being the most efficient, assuming that deadlock is a very rare event. Comment on your ordering

Answers

Answer 1

Answer:

banker’s algorithm,

(2) detect deadlock and kill thread, releasing all resources,

(3) reserve all resources in advance,

(4) restart thread and release all resources if thread needs to wait,

(5) resource ordering, and

(6) detect deadlock and roll back thread’s actions.

b) Another criterion is efficiency; in other words, which requires the least processor overhead. Rank order the approaches from 1 to 6, with 1 being the most efficient, assuming that deadlock is a very rare event. Comment on your ordering

Explanation:


Related Questions

Suppose that a wing component on an aircraft is fabricated from an aluminum alloy that has a plane strain fracture toughness of 29 MPa (26.39 ksi). It has been determined that fracture results at a stress of 101 MPa (14650 psi) when the maximum internal crack length is 7.5 mm (0.2953 in.). For this same component and alloy, compute the stress level at which fracture will occur for a critical internal crack length of 5 mm (0.1969 in.).

Answers

Answer:

123.46 MPa

Explanation:

( Aluminum alloy Plane strain fracture toughness = 29 MPa ( 26.39 ksi )

Fracture results at a stress of 101 MPa ( psi )

maximum internal crack length = 7.5 mm ( 0.2953 in )

Compute the stress level at which fracture will occur for a critical internal crack length of 5 mm ( 0.1969 in )

Y = \(\frac{KI_{c} }{\alpha \sqrt{\pi a} }\)  

Y =  29 / 101 √π [( 7.5 * 10^-3 ) / 2]

   = 29 / 101 √ 0.01178097245 = 29 / ( 101 * 0.1085 )

   = 2.65

hence the stress level at which fracture will occur for a critical internal crack length of 5 mm

∝c = \(\frac{KI_{c} }{y\sqrt{\pi a} }\)

Given;  y = 2.65 , KIc = 29, a = ( 5 * 10^-3 ) / 2 = 0.0025

hence ∝c = 29 / 2.65 \(\sqrt{\pi *0.0025}\)

                 = 29 / 0.2349 ≈ 123.46 MPa

.You can work to avoid ethical lapses in your visuals by following these guidelines:
- Consider all possible interpretations
- Provide appropriate visual context
- Don't conceal negative information
- Don't exaggerate support information
- Dont' oversimplify complex situations
- Don't imply cause and effect
- Avoid manipulation or coercion
- Be careful how you aggregate data

Answers

By adhering to the below guidelines, you can create visuals that are ethically sound and accurately convey the intended message.

To avoid ethical lapses in your visuals, follow these guidelines:
1. Consider all possible interpretations: Think about how your audience may perceive the visual and ensure it accurately represents the intended message.
2. Provide appropriate visual context: Present visuals within a context that is relevant and supports the overall message, avoiding misleading or confusing representations.
3. Don't conceal negative information: Be transparent and include all pertinent information, including negative aspects, to provide a balanced view.
4. Don't exaggerate support information: Present supporting information accurately and avoid overemphasizing or distorting it to mislead the audience.
5. Don't oversimplify complex situations: Be mindful of complexities and nuances in the data, avoiding the temptation to oversimplify information that requires a more in-depth understanding.
6. Don't imply cause and effect: Avoid suggesting causal relationships between variables when there is insufficient evidence to support such claims.
7. Avoid manipulation or coercion: Present visuals in an unbiased manner, without attempting to manipulate or coerce the audience into adopting a particular viewpoint.
8. Be careful how you aggregate data: Aggregate data responsibly and accurately, ensuring that the aggregation method used does not distort the data or its interpretation.

To learn more about Guidelines Here:

https://brainly.com/question/1918317

#SPJ11

When exchanging information with anyone involved in the collision, you should _____.

Answers

Try to be as relax as possible.

Provide names of all parties involved.

Provide vehicle information and identification details.

Provide full names, address, registration numbers and insurance company details.

Explanation:

After a collision one may be confused, afraid and have no attention about the details that what happened because all the collision event happens in a short interval of time. So the first thing one should do during information exchange is to sit back and relax and be calm so that one can remind the things at some extent. After that provide all the details about injured people and the involved vehicles.

A project ha following time chedule: Activity Time in Week Activity Time in Week 1-2 4 5-7 8 1-3 1 6-8 1 2-4 1 7-8 2 3-4 1 8-9 1 3-5 6 8-10 8 4-9 5 9-10 7 5-6 4 Contruct the network and compute: (1) TE and TL for each event (2) Float for each activity (3) Critical path and it duration

Answers

(1) TE and TL for each event

Event 1: TE=0, TL=0

Event 2: TE=4, TL=4

Event 3: TE=1, TL=5

Event 4: TE=2, TL=6

Event 5: TE=6, TL=12

Event 6: TE=1, TL=2

Event 7: TE=8, TL=16

Event 8: TE=9, TL=17

Event 9: TE=8, TL=18

Event 10: TE=16, TL=23

(2) Float for each activity

Activity 1-2: Float=0

Activity 1-3: Float=3

Activity 2-4: Float=2

Activity 3-4: Float=1

Activity 3-5: Float=0

Activity 4-9: Float=0

Activity 5-6: Float=0

Activity 5-7: Float=0

Activity 6-8: Float=7

Activity 7-8: Float=6

Activity 8-9: Float=5

Activity 8-10: Float=0

Activity 9-10: Float=0

(3) The critical path for this project is: 3-4, 4-9, 5-7, 7-8, 8-10, 9-10, with a total duration of 23 weeks.

THE SOLUTION

To construct the network and compute the requested information, we first need to create a list of events and activities.

From the given schedule, we can identify the following events and activities:

Events:

        1, 2, 3, 4, 5, 6, 7, 8, 9, 10

Activities:

1-2: 4 weeks

1-3: 1 week

2-4: 1 week

3-4: 1 week

3-5: 6 weeks

4-9: 5 weeks

5-6: 4 weeks

5-7: 8 weeks

6-8: 1 week

7-8: 2 weeks

8-9: 1 week

8-10: 8 weeks

9-10: 7 weeks

Now we can compute the TE (time when an event is expected to start) and TL (time when an event is expected to be completed) for each event, as well as the float (amount of time that an activity can be delayed without delaying the project completion) for each activity.

TE and TL for each event:

Event 1: TE=0, TL=0

Event 2: TE=4, TL=4

Event 3: TE=1, TL=5

Event 4: TE=2, TL=6

Event 5: TE=6, TL=12

Event 6: TE=1, TL=2

Event 7: TE=8, TL=16

Event 8: TE=9, TL=17

Event 9: TE=8, TL=18

Event 10: TE=16, TL=23

Float for each activity:

Activity 1-2: Float=0

Activity 1-3: Float=3

Activity 2-4: Float=2

Activity 3-4: Float=1

Activity 3-5: Float=0

Activity 4-9: Float=0

Activity 5-6: Float=0

Activity 5-7: Float=0

Activity 6-8: Float=7

Activity 7-8: Float=6

Activity 8-9: Float=5

Activity 8-10: Float=0

Activity 9-10: Float=0

The critical path is the sequence of activities that have zero float, meaning they cannot be delayed without delaying the project completion. The critical path for this project is: 3-4, 4-9, 5-7, 7-8, 8-10, 9-10, with a total duration of 23 weeks.

Learn more about Construct Network here:

https://brainly.com/question/29355713

#SPJ4

What is the Bernoulli formula?

Answers

Answer:

P1+1/2pv2/1+pgh1=P2+1/2pv2/2+pgh2

According to astm d2487, a piece of stone with a 1.5-inch diameter is considered:______.

Answers

Answer: Your answer friend is Boulder. Good luck man

Explanation:

What is the creative process that helps you overcome writer's block called?
The creative process that helps you overcome writer's block is called
Reset
Next

Answers

The creative process that helps you overcome writer's block is called Reset.

How do you overcome writer's block?Methods to Overcome Writer's BlockImprove Your Workspace.Utilize the Pomodoro Technique.Schedule a Time and Make a Pattern.Try a Writing Prompt.It's OK to Be Flawed.

Thus, could be the answer.

To learn  more about the creative process click here:

https://brainly.com/question/19249364

#SPJ1

is called ecoines

Explanation:

You are an engineer in an electric-generation station. You know that the flames in the boiler reach a temperature of 1200 K and that cooling water at 300 K is available from a nearby river. You also know that the metallurgical temperature limit for the blades in the turbine is 1000 K before they will incur excessive creep. Now what is the maximum efficiency for this plant

Answers

Answer:

...wat

Explanation:

The maximum efficiency for this plant would be 75%.Efficiency is the ability to do something or produce a desired result without wasting resources, time, money, energy, or effort.

In a broader sense, it is the capacity to carry out tasks effectively and efficiently. Efficiency is "thus not a goal in itself. It is not something humans want for the sake of it but instead because it helps us attain a greater number of things we value,"

According to Deborah Stone. It denotes the level of performance that requires the fewest inputs to produce the greatest amount of output in more scientific or mathematical terms. It frequently specifically refers to the ability of a particular application of effort to achieve a particular outcome with the least amount of waste, expense, or needless effort.

Learn more about efficiency on:

https://brainly.com/question/30861596

#SPJ2

Hotel Fire Safety Directors shall do all EXCEPT:

A. train and supervise Fire Brigade
B. conduct fire drills
C. order full building evacuation of guests
D. distribute applicable parts of the Fire Safety Plan to all employees

Answers

Hotel Fire Safety Directors are not authorized to order a full building evacuation of guests. Therefore, option (C) is correct.

Who are Hotel Fire Safety Directors?

Hotel Fire Safety Directors are individuals who are responsible for ensuring the safety of guests and employees in the event of a fire emergency in a hotel or other hospitality establishment.

They are typically appointed by the hotel management and must have knowledge of fire safety regulations and protocols, as well as the ability to lead and manage a team during an emergency.

Hotel Fire Safety Directors are responsible for implementing and maintaining the Fire Safety Plan, which includes conducting fire drills, training and supervising the Fire Brigade, and distributing applicable parts of the Fire Safety Plan to all employees. They must also work closely with the local fire department to ensure compliance with local fire safety regulations and protocols.

Learn more about Hotel Fire Safety, here:

https://brainly.com/question/4245370

#SPJ4

Which is a small plain text file that a website might place on your local drive?

Answers

Answer:A cookie

Explanation:To track interests.

which problem can occur if your system case fan blows in the wrong direction?

Answers

The system overheat if a fan blows in the wrong direction, preventing airflow through the case.

In a computer case, how can airflow be controlled?

Air should follow a straight line through the case. In most cases, you want the case fans at the front of the case to draw in air and the ones at the back to blow out air. Because hot air will rise, vents at the top of your case should be used as exhaust fans.

What triggers CPU overheating?

Overheating of a computer is typically brought on by multiple factors. If dust is allowed to accumulate over time, it can obstruct the fans and overheat the CPU or GPU. The fans may go into overdrive if there are too many applications running simultaneously, and if this happens too often, the fans may stop working.

To know more about system overheat visit :-

https://brainly.com/question/24178500

#SPJ4

Refrigerant 134a at p1 = 30 lbf/in2, T1 = 40oF enters a compressor operating at steady state with a mass flow rate of 200 lb/h and exits as saturated vapor at p2 = 160 lbf/in2. Heat transfer occurs from the compressor to its surroundings, which are at T0 = 40oF. Changes in kinetic and potential energy can be ignored. The power input to the compressor is 2 hp. Determine the heat transfer rate for the compressor, in Btu/hr, and the entropy production rate for the compressor, in Btu/hr·oR.

Answers

Answer:

a) \(\mathbf{Q_c = -3730.8684 \ Btu/hr}\)

b) \(\mathbf{\sigma _c = 4.3067 \ Btu/hr ^0R}\)

Explanation:

From the properties of Super-heated Refrigerant 134a Vapor at \(T_1 = 40^0 F\), \(P_1 = 30 \ lbf/in^2\) ; we obtain the following properties for specific enthalpy and specific entropy.

So; specific enthalpy \(h_1 = 109.12 \ Btu/lb\)

specific entropy \(s_1 = 0.2315 \ Btu/lb.^0R\)

Also; from the properties of saturated Refrigerant 134 a vapor (liquid - vapor). pressure table at \(P_2 = 160 \ lbf/in^2\) ; we obtain the following properties:

\(h_2 = 115.91 \ Btu/lb\\\\ s_2 = 0.2157 \ Btu/lb.^0R\)

Given that the power input to the compressor is 2 hp;

Then converting to  Btu/hr ;we known that since 1 hp = 2544.4342 Btu/hr

2 hp = 2 × 2544.4342 Btu/hr

2 hp = 5088.8684 Btu/hr

The steady state energy for a compressor can be expressed by the formula:

\(0 = Q_c -W_c+m((h_1-h_e) + \dfrac{v_i^2-v_e^2}{2}+g(\bar \omega_i - \bar \omega_e)\)

By neglecting kinetic and potential energy effects; we have:

\(0 = Q_c -W_c+m(h_1-h_2) \\ \\ Q_c = -W_c+m(h_2-h_1)\)

\(Q_c = -5088.8684 \ Btu/hr +200 \ lb/hr( 115.91 -109.12) Btu/lb \\ \\\)

\(\mathbf{Q_c = -3730.8684 \ Btu/hr}\)

b)  To determine the entropy generation; we employ the formula:

\(\dfrac{dS}{dt} =\dfrac{Qc}{T}+ m( s_1 -s_2) + \sigma _c\)

In a steady state condition \(\dfrac{dS}{dt} =0\)

Hence;

\(0=\dfrac{Qc}{T}+ m( s_1 -s_2) + \sigma _c\)

\(\sigma _c = m( s_1 -s_2) - \dfrac{Qc}{T}\)

\(\sigma _c = [200 \ lb/hr (0.2157 -0.2315) \ Btu/lb .^0R - \dfrac{(-3730.8684 \ Btu/hr)}{(40^0 + 459.67^0)^0R}]\)

\(\sigma _c = [(-3.16 ) \ Btu/hr .^0R + (7.4667 ) Btu/hr ^0R}]\)

\(\mathbf{\sigma _c = 4.3067 \ Btu/hr ^0R}\)

An electrical engineer at GRIDCO is given two separate toolboxes to keep his working tools. The first toolbox has 4 white fuses and 3 black fuses and the second toolbox has 3 white fuses and 5 black fuses. Suppose the engineer select a fuse from the first toolbox and placed unseen in the second toolbox. What is the probability that: (a) the fuse drawn from the second toolbox is black? (B) the fuse drawn from the second toolbox is white? (8) ane is white?

Answers

(a) The probability of drawing a black fuse from the second toolbox is 4/7.

(b) The probability of drawing a white fuse from the second toolbox is 3/7.

(c) The probability that one fuse is white is 27/49.

To calculate the probabilities, we need to consider the number of white and black fuses in each toolbox.

First, let's determine the total number of fuses in each toolbox:

First Toolbox:

Total fuses = 4 white fuses + 3 black fuses = 7 fuses

Second Toolbox:

Total fuses = 3 white fuses + 5 black fuses = 8 fuses

(a) The probability that the fuse drawn from the second toolbox is black:

The probability of drawing a black fuse from the second toolbox depends on the fuse selected from the first toolbox. There are two scenarios to consider:

Scenario 1: The fuse selected from the first toolbox is black.

In this case, the second toolbox will have 3 black fuses remaining out of the total 7 fuses.

Probability = (Number of black fuses in the second toolbox)/(Total number of fuses in the second toolbox)

Probability = 3/7

Scenario 2: The fuse selected from the first toolbox is white.

In this case, the second toolbox will have 5 black fuses out of the total 7 fuses.

Probability = (Number of black fuses in the second toolbox)/(Total number of fuses in the second toolbox)

Probability = 5/7

To calculate the overall probability, we need to consider the probability of each scenario and weigh it by the probability of selecting a fuse of that color from the first toolbox. Since the fuse from the first toolbox has an equal chance of being white or black, we need to take an average of the probabilities in both scenarios.

Probability of drawing a black fuse from the second toolbox = (Probability of scenario 1 + Probability of scenario 2)/2

Probability of drawing a black fuse from the second toolbox = (3/7 + 5/7)/2

Probability of drawing a black fuse from the second toolbox = 8/14

Probability of drawing a black fuse from the second toolbox = 4/7

Therefore, the probability of drawing a black fuse from the second toolbox is 4/7.

(b) The probability that the fuse drawn from the second toolbox is white:

Similarly, we can calculate the probability of drawing a white fuse from the second toolbox. It will be the complement of the probability of drawing a black fuse.

Probability of drawing a white fuse from the second toolbox = 1 - Probability of drawing a black fuse from the second toolbox

Probability of drawing a white fuse from the second toolbox = 1 - 4/7

Probability of drawing a white fuse from the second toolbox = 3/7

Therefore, the probability of drawing a white fuse from the second toolbox is 3/7.

(c) The probability that one is white:

To calculate the probability that one fuse is white, we need to consider both scenarios: either the fuse drawn from the first toolbox is white and the fuse drawn from the second toolbox is black, or the fuse drawn from the first toolbox is black and the fuse drawn from the second toolbox is white.

Scenario 1: Fuse drawn from the first toolbox is white, and the second toolbox has a black fuse:

Probability = (Probability of drawing a white fuse from the first toolbox) * (Probability of drawing a black fuse from the second toolbox)

Probability = (3/7) * (5/7)

Scenario 2: Fuse drawn from the first toolbox is black, and the second toolbox has a white fuse:

Probability = (Probability of drawing a black fuse from the first toolbox) * (Probability of drawing a white fuse from the second toolbox)

Probability = (4/7) * (3/7)

To calculate the overall probability, we need to sum up the probabilities of both scenarios:

Probability that one fuse is white = Probability

of scenario 1 + Probability of scenario 2

Probability that one fuse is white = (3/7) * (5/7) + (4/7) * (3/7)

Probability that one fuse is white = 15/49 + 12/49

Probability that one fuse is white = 27/49

Therefore, the probability that one fuse is white is 27/49.

To learn more about probability  Click Here: brainly.com/question/31828911

#SPJ11

Pls answer and I will give a like!

Pls answer and I will give a like!

Answers

Answer:

a

Explanation:

Consider a vertical piston/cylinder system. The piston has a mass of 35 kg and has an unknown radius. There is a pressure gauge to output the pressure inside the cylinder. If the piston is compressed and the pressure gauge reads 300 kPa. What is the area of the piston

Answers

Answer:

Area of the piston = 1.143 * 10^-3 m^2

Explanation:

Here, we are tasked with calculating the area of the piston.

Mathematically, the area of the piston =

Piston force/ cylinder pressure

From the question,

Piston force = mg where m is the mass of the piston = 35 kg and g is the acceleration due to gravity = 9.8 m/s^2

Thus, piston force = 35 * 9.8 = 343 N

Now the pressure gauge reads 300 KPa and 1KPa = 300 * 10^3 Pa = 300000 Pa

Thus, the area of the piston = 343/300000 =

0.001143333333 m^2 which is simply 1.143 * 10^-3 m^2

I need to solve for d

I need to solve for d

Answers

Answer:

it's not included

Explanation:

plz exact ur explain

Answer:

si amor

Explanation:

Hoiykñjdnlklbutrk

In the given example, which type of interior designer is Sarah? Sarah is an interior designer. The state in which she resides applies practice acts to interior design professionals. Therefore, Sarah carries the title of a ____ interior designer.

Answers

Answer:

Sarah is a professional interior designer.

Therefore, Sarah carries the title of a _registered___ interior designer.

Explanation:

Some states require only the licensed designers to carry out interior designs, while some others allow both the licensed and unlicensed interior designers to carry on the work of interior designers.  In the states where only the licensed designers are allowed to use the title of interior designer, they are registered after passing the state-prescribed examinations and meeting some professional experience requirements. The most common exam is the National Council for Interior Design Qualification (NCIDQ) examination, which only bachelor degree holders in interior design are allowed to sit for.

the concrete slab of a basement is 11 m long, 8 m wide, and 0.20 m thick. during the winter, temperatures are nominally 17°c and 10°c at the top and

Answers

In conclusion, the concrete slab of the basement will lose approximately 2,310 watts of heat during the winter due to the temperature difference between the top and bottom surfaces.

The concrete slab of a basement is 11 m long, 8 m wide, and 0.20 m thick. During the winter, temperatures are nominally 17°C and 10°C at the top and bottom surfaces of the slab, respectively.
To calculate the rate of heat loss through the slab, we can use the formula:
Q = k * A * ΔT / d
Where:
Q = heat loss
k = thermal conductivity of the concrete
A = surface area of the slab
ΔT = temperature difference between the top and bottom surfaces
d = thickness of the slab
First, we need to find the surface area of the slab:
A = length * width
A = 11 m * 8 m
A = 88 square meters
Next, we calculate the temperature difference:
ΔT = 17°C - 10°C
ΔT = 7°C
Now, we need to determine the thermal conductivity of the concrete. This value can vary depending on the type of concrete used. Let's assume it is 1.5 W/(m·K).
Finally, we can calculate the heat loss:
Q = 1.5 W/(m·K) * 88 m² * 7°C / 0.20 m
Q ≈ 2,310 watts
In conclusion, the concrete slab of the basement will lose approximately 2,310 watts of heat during the winter due to the temperature difference between the top and bottom surfaces.

To know more about concrete visit:

https://brainly.com/question/32805749

#SPJ11

a 3500 psi concrete is made with limestone aggregate. suppose you replace 55% of the aggregate with solid steel balls (about the same average size as the aggregates). is the compressive strength going to increase? what about the elastic modulus? please justify your answer.

Answers

The modulus of elasticity of concrete increases in proportion to the magnitude of the material's compressive strength. This can be explained by a higher coefficient (correlation) between the compressive strength (square root) and modulus of elasticity of concrete.

What connection exists between strength and modulus of elasticity?It is an essential mechanical property of concrete. As the modulus of elasticity increases, the material stiffens and the structure's deflection decreases. A compressive strength test must be used to calculate the modulus of elasticity of concrete. It is a critical mechanical property of concrete. As the modulus of elasticity increases, the material stiffens and the structure experiences less deflection. The elastic modulus of concrete must be calculated using a compressive strength test.In general, the compressive strength of concrete and its elastic modulus are inextricably linked. The elastic modulus of concrete increases as its compressive strength increases.

To learn more about elastic modulus refer to:

brainly.com/question/25730005

#SPJ1

(a) (6 points) Find the integer a in {0, 1,..., 26} such that a = -15 (mod 27). Explain. (b) (6 points) Which positive integers less than 12 are relatively prime to 12?

Answers

a. a = 12 is the solution to the given congruence relation. b. the positive integers less than 12 that are relatively prime to 12 are 1, 5, 7, and 11.

(a) The main answer: The integer a that satisfies a ≡ -15 (mod 27) is 12.

To find the value of a, we need to consider the congruence relation a ≡ -15 (mod 27). This means that a and -15 have the same remainder when divided by 27.

To determine the value of a, we can add multiples of 27 to -15 until we find a number that falls within the range of {0, 1,..., 26}. By adding 27 to -15, we get 12. Therefore, a = 12 is the solution to the given congruence relation.

(b) The main answer: The positive integers less than 12 that are relatively prime to 12 are 1, 5, 7, and 11.

Supporting explanation: Two integers are relatively prime if their greatest common divisor (GCD) is 1. In this case, we are looking for positive integers that have no common factors with 12 other than 1.

To determine which numbers satisfy this condition, we can examine each positive integer less than 12 and calculate its GCD with 12.

For 1, the GCD(1, 12) = 1, which means it is relatively prime to 12.

For 2, the GCD(2, 12) = 2, so it is not relatively prime to 12.

For 3, the GCD(3, 12) = 3, so it is not relatively prime to 12.

For 4, the GCD(4, 12) = 4, so it is not relatively prime to 12.

For 5, the GCD(5, 12) = 1, which means it is relatively prime to 12.

For 6, the GCD(6, 12) = 6, so it is not relatively prime to 12.

For 7, the GCD(7, 12) = 1, which means it is relatively prime to 12.

For 8, the GCD(8, 12) = 4, so it is not relatively prime to 12.

For 9, the GCD(9, 12) = 3, so it is not relatively prime to 12.

For 10, the GCD(10, 12) = 2, so it is not relatively prime to 12.

For 11, the GCD(11, 12) = 1, which means it is relatively prime to 12.

Therefore, the positive integers less than 12 that are relatively prime to 12 are 1, 5, 7, and 11.

Learn more about prime here

https://brainly.com/question/145452

#SPJ11

Water and air quality are critical issues facing human society.


True

False

Answers

Humans impact the physical environment in many ways: overpopulation, pollution, burning fossil fuels, and deforestation. Changes like these have triggered climate change, soil erosion, poor air quality, and undrinkable water.

Engineers will redesign their products when they find flaws. TRUE O False​

Answers

Answer:

true

Explanation:

Estimate properties and pipe diameter Determine the diameter of a steel pipe that is to carry 2000 gal/min of gasoline with a pressure drop of 5 psi per 100 ft of horizontal pipe. Pressure drop is a function of flow rate, length, diameter, and roughness. Either iterative methods OR equation solvers are necessary to solve implicit problems. Total head is the sum of the pressure, velocity, and elevation. What is the density of gasoline

Answers

Answer:

Diameter of pipe is 0.535 ft

Explanation:

see attachment, its works out 1st half

The zinc blende crystal structure is one that may be generated from close-packed planes of anions (a) Will the stacking sequence for this structure be FCC or HCP? Why? (b) Will cations fill tetrahedral or octahedral positions? Why? (c) What fraction of the positions will be occupied?

Answers

(a) The stacking sequence for the zinc blende crystal structure will be FCC (face-centered cubic). This is because the anions form close-packed planes in an FCC arrangement, and the cations occupy tetrahedral interstitial sites between these planes.

(b) The cations will fill tetrahedral positions. This is because each anion in the close-packed planes is surrounded by four cations that occupy the tetrahedral sites. The tetrahedral sites are located at the center of each tetrahedron formed by four anions, and each tetrahedron shares its four vertices with neighboring tetrahedra.(c) In the zinc blende crystal structure, each anion has four tetrahedral sites available for cation occupancy. Since each cation occupies one of these tetrahedral sites, the fraction of occupied positions will be equal to the number of cations divided by the total number of available tetrahedral sites. Therefore, the fraction of occupied positions will be 1/4 or 0.25.

Learn more about crystal here

https://brainly.com/question/30189175

#SPJ11

a full-authority electronic engine control (eec) is a system that receives all the necessary data for engine operation and develops the commands to various actuators to control engine parameters

Answers

"A full-authority electronic engine control (EEC) is a system that acquires all the vital data needed for engine operation and generates commands for different actuators to manage engine parameters. The EEC processes information from various sensors and manages the engine's electronic components, ensuring optimal performance, efficiency, and safety. This advanced system allows for precise control over engine functions such as fuel injection, ignition timing, and air intake, ultimately improving the overall engine performance."

Electronic Engine Control (EEC) is a system that manages and regulates the operation of an internal combustion engine using electronic components. It utilizes sensors to gather data on various engine parameters such as temperature, airflow, and crankshaft position. This information is then processed by an Engine Control Unit (ECU) which controls critical functions like fuel injection timing, ignition timing, and idle speed. The EEC system optimizes engine performance, fuel efficiency, and emissions by continuously monitoring and adjusting these parameters in real-time.

The functions of Full Authority Electronic Engine Control (FADEC) include:

1. Engine Starting: FADEC manages the engine starting sequence, controlling fuel flow, ignition timing, and other parameters to ensure a smooth and reliable start.

2. Throttle Control: FADEC regulates the engine's thrust or power output by precisely controlling the position of the throttle valve or fuel flow rate. It responds to pilot inputs and other factors such as aircraft altitude, airspeed, and temperature to optimize engine performance.

3. Fuel Metering: FADEC precisely meters the fuel flow into the engine combustion chamber based on various inputs, such as throttle position, altitude, air temperature, and engine condition. It ensures optimal fuel-air mixture ratios for efficient combustion and performance.

4. Ignition Control: FADEC controls the ignition timing during engine startup, operation, and shutdown. It ensures proper spark timing for reliable combustion and ignition, considering factors such as engine speed, temperature, and altitude.

5. Health Monitoring: FADEC continuously monitors the engine's performance and health parameters, such as temperatures, pressures, vibration levels, and sensor readings. It can detect anomalies or malfunctions and provide alerts or take appropriate actions to prevent engine damage or failure.

6. Engine Protection: FADEC incorporates safeguards to protect the engine from operating conditions that could potentially damage it. It can automatically limit engine parameters, such as temperature or pressure, to prevent exceeding safe limits and ensure the engine's longevity and reliability.

7. Fault Diagnostics: FADEC has built-in diagnostic capabilities to detect and identify engine faults or failures. It can record fault codes, provide diagnostic messages, and assist maintenance crews in troubleshooting and identifying the source of the problem.

8. Performance Optimization: FADEC continuously optimizes engine performance by adjusting parameters, such as fuel flow rate, ignition timing, and other engine control variables, based on real-time operating conditions. This optimization improves fuel efficiency, reduces emissions, and enhances overall engine performance.

9. Engine Shutdown: FADEC controls the engine shutdown sequence, ensuring that all necessary steps are executed safely and in the correct order. It shuts off fuel flow, deactivates ignition systems, and performs other required procedures to bring the engine to a secure stop.

Overall, FADEC improves engine control precision, efficiency, reliability, and safety by using advanced electronic systems and algorithms to manage various engine functions.

To know more about electronic engine control visit:

https://brainly.com/question/29780075

#SPJ11

A baker is weighing the dough that will be used to make pastries. The line plot shows the weight of the dough for each pastry.

Answers

Answer:

Total number of pastries that will be made from at least \(3/8\) a pound of dough is \(8.\)

Explanation:

It is given that the line plot shows the weight of the dough for each pastry.

From the given box plot it is clear that,

Number of pastries with weight pound

Number of pastries with weight pound

Number of pastries with weight pound

We know that

We need to find the number of pastries that will be made from at least a pound of dough. It means the number of pastries whose weight is

Number of pastries with weight pound Number of pastries with weight pound

\(N=3+5\)

\(N=8\)

Therefore, the total number of pastries that will be made from at least a pound of dough is

It is the complete question,

A baker is weighing the dough that will be used to make pastries. The line plot shows the weight of the

When an object is made of the plastic polyester (PET), it uses antimony as a catalyst. After production, antimony can leach into food and drink stored in PET containers. Usually, if stored correctly for a short amount of time, the amount of antimony found in liquids is well below the safety limits. However, there have been reports of as much as 44.7 micrograms per liter [µg/L] of antimony found in fruit juice concentrates. How much antimony, in units of moles [mol], could be found in one gallon [gal] of fruit juice concentrate at this level of contamination? The molecular mass of antimony is 121.76 grams per mole [g/mol].

Answers

Answer:

  1.39 µmol

Explanation:

(1 gal) × (44.7 µg/L)/(121.76 g/mol)(3.785411784 L/gal) = 1.39 µmol

What is one of the reasons to consider implementing a blockchain solution?

Answers

Blockchain is often used often in the verification and locating of multistep transactions. One of the reasons to consider implementing a blockchain solution is the ability to work on different versions of the same data.

Blockchain solution is known to keep transactions safe, limit compliance costs, and speed up data transfer processing. It is known to back up the accuracy of the data.

In Blockchain, all node can see all transactions that are taking place in the system and all will get a copy of each of them to update its data and approve it.

See full question below

What is one of the reasons to consider implementing a blockchain solution?

Options:

1.inability to track simultaneous updates by multiple users

2. ability to work on different versions of the same data

3.ability to verify that data has not been tampered with since its creation

4.inability to trace and access data of other users

Learn more from

https://brainly.com/question/23827936

1 poli The H screw on this carburetor is for the setting idlle mixture of fuel and air adjusting the high speed fuel air mixture O adjusting the high speed setting of the engine adjusting the throttle position of the carburetor​

Answers

The H screw on a carburetor is used for adjusting the high-speed fuel-air mixture of the engine. This screw is responsible for controlling the amount of fuel and air that enters the engine when it is running at a high speed.

It is important to set this screw correctly in order to ensure optimal engine performance and prevent damage to the engine. The idle mixture is adjusted using a different screw, typically labeled as the L screw. The throttle position of the carburetor is also important to consider when adjusting the engine speed. A carburetor is a device that mixes air and fuel in the proper ratio for combustion in an internal combustion engine. It is used in older gasoline-powered vehicles and small engines such as lawnmowers, chainsaws, and motorcycles. The carburetor works by regulating the flow of air and fuel into the engine. It consists of a series of tubes, valves, and chambers that control the amount of fuel and air that enter the engine. Carburetors have been largely replaced by fuel injection systems, which are more efficient and reliable, but they still have some applications in small engines and vintage vehicles. Carburetors require regular maintenance and tuning to ensure proper engine performance and fuel efficiency.

Learn more about carburetor here:

https://brainly.com/question/4237015

#SPJ11

rosbel or Janette lol baakkaaa

Answers

Answer:

t5g5gtttttttttttttttttttttttttttttttttttttttttttt

Explanation:gt555555555555555555555555555555555555555555555555

Answer:

dawbkjbjwwjhjfbfjewfaekfhawkjndwkja

Explanation: dum*as*

Other Questions
It is observed that in water the meniscus in the capillary tube is higher than the meniscus in the beaker,while in mercury the meniscus is lower than the meniscus in the beaker.explain these observations NEED HELP ASAP PLEASE! Principles Matching (Write the letter before the number)1. Popular Sovereignty2. Checks and Balance3. Individual Rights4. Limited Government5. Separation of Powers6. Federalism7. RepublicanismA. Division of Power the nation and the stateB. Basic, Unalienable RightsC. "We the People" have Final AuthorityD. Creates a Balance of PowerE. Only Power given in the ConstitutionF. Power to elect RepresentativesG. Three Branches Simplify the expression:Do not use any spaces. 5x3x+2xx PLEASE HELP!!!! I WILL GIVE BRAINLIEST TO THE RIGHT ANSWER!!!! 1. He understands them better than he understands us. (a los nios) l ______ comprende mejor que nos comprende.2. I needed a suitcase. We bought it yesterday. (la maleta) Me faltaba una maleta. ______ compramos ayer.3. I am developing them for you now. (las fotos) (para ti) _____ ______ estoy revelando ahora.4. Try them! I tried them, and they are good! (las galletas) Prueba ______! ______ prob y estn deliciosas.5. He joined them last week. (a sus amigos) _______ acompa la semana pasada.6. Measure the dry ingredients. Next, mix them in a bowl. (los ingredientes) Mide los ingredientes secos. Luego, mzcla__________ en un tazn.7. These are the vocabulary words. It's important to study them. (las palabras). Aqu tienen las palabras de vocabulario. Es importante estudiar______.8. I shared my fries with you, now you can share them with her. (papas fritas, con ella) Yo te compart mis papas fritas, ahora t _____ ____ puedes compartir.9. Tell me about the problem. Dga _______ sobre el problema.10. You have a suit. Wear it for your meeting. (el traje). Tienes un traje. Llva_____ para tu reunin.11. The books? Our father bought them for us. (los libros) Los libros? Nuestro padre _____ _____ compr.12. He needs glasses to see better. Buy them for him soon. (los lentes) l necesita lentes para ver mejor. Cmpre____ _______ pronto.13. Before preparing the vegetables for the salad, you have to wash them. (las verduras) Antes de preparar las verduras para la ensalada, tienes que lavar ______.14. What a nice view! We see it every day. (la vista) Qu vista bella! ______ vemos cada da.15. They watched me every day. _______ cuidaban todos los das.16. Someone lost a wallet. I found it over there. (la cartera) A alguien se le perdi la cartera. ______ encontr all.17. Did you call him yet? Ya ______ llamaste.18. You called me last night, right? T _______ llamaste anoche, verdad?19. My students learned Spanish well. I helped them to learn it. (los alumnos, el espaol) Mis alumnos aprendieron bien el espaol. _______ ayud a aprender ______.20. Dad always separated us when we argued. Pap siempre _______ separaba cuando nos discutamos. make a list of UNFPA major functions in the field of population? Identify the complications that result in a shortened life expectancy of people inflicted with diabetes. (Check all that apply.)- Amputation of extremities- Nervous system damage what is the rhetorical situation in which anzaldua finds her- self-using different language forms. Whether working for a nonprofit such as the Red Cross or a company with the goal of making profits such as Macy's, managers: all else equal, purchases of most goods tend to rise with increases in buyers' incomes and to fall with decreases in buyers' incomes. such goods are known as: PLEASE HELP!!! I WILL GIVE BRAILIEST Write the trigonometric expression as an algebraic expression in usec (sin u) the predominant greenhouse gas produced by human use of fossil fuels is __________. find the slope of the line Which value is a solution to x < 15 POINTSSS PLEASE HELPPPPPP "We whose names are underwritten...do by these presents solemnly and mutually in the presence of god, and one of another, covenant and combine ourselves together into a civil body politic, for our better ordering and preservation, and furtherance of the ends aforesaid: And by virtue hereof do enact, constitute and frames, such just and equal laws, Ordinances, Acts, Constitutions, and Officers, from time to time, as shall be thought most meet and convenient for the general Good of the Colony; unto which we promise all due Submission and Obedience."-Mayflower Compact, 1620 For what reason did a group of colonists agree to this compact?A. To declare independence from all European nationsB. To form a social contract among themselvesC. To demonstrate good will toward local American IndiansD. to establish trade relations with other colonies Thank neeed help thanks why would adding ouabain to the serosal side of the sac decrease na transport, but adding it to the mucosal side had little effect? (transport normally declines slowly over time in isolated tissue preparations.) why would adding ouabain to the serosal side of the sac decrease na transport, but adding it to the mucosal side had little effect? (transport normally declines slowly over time in isolated tissue preparations.) ouabain inhibits the active transport of sodium out of the cell, which is necessary to keep na concentrations in the cell low. ouabain is inactivated in the mucosal membrane. ouabain decreases the sodium transport by decreasing the atp production in the cell. which factor contributed most to why large farms and plantation were never formed in New England?