An X-bar R chart was prepared for an operation using twenty samples with 5 pieces in each sample. X-bar-bar was found to be 33.6and R=bar was 6.2. During production a sample of 5 was taken and the pieces measured 36, 43, 37, 25, and 38. At the time this sample was taken: Select the correct answer:
a. Both the average and range were within control limits.
b. Neither the average nor range were within control limits.
c. Only the average was outside control limits.
d. Only the range was outside control limits.
Answers
Answer:
D) Only the range was outside control limits.
Explanation:
The range is the difference between the largest and smallest set of data, or in this case the longest and shortest pieces. In this case, the longest piece measured 43 and the shortest 25, so the range was 18 which is much higher than the control range, 6.2, so it clearly is outside any type of control limit.
The mean of the 5 samples was 35.8, which is only 2.2 away from the mean of the control chart. Even though it is higher than the control mean, the difference represents only 6.5% which can be considered normal.
Related Questions
Suppose a monopolistically competitive firm is earning an economic profit. The marginal revenue from selling an additional unit is $30, and the marginal cost of producing that additional unit is $23. The firm should _____
Answers
what is paying divedends to stockholders do?
Answers
Dividends are paid out by companies as a strategy to reward present stockholders and lure in new ones.
Owners of one or more shares of a company's capital stock are referred to as stockholders or shareholders. As a result of being seen as distinct from the corporation, an investor is only partially liable for its debts. Common stockholder is a term used to describe a person who owns shares of common stock in a firm. The corporation's board of directors is chosen by the company's common investors, who also cast ballots on specific decisions like the company's merger with another corporation. When a business succeeds more and more, common stockholders typically benefit financially. Some businesses also issue preferred stock along with common stock. Preferred stockholders are the people who own shares of preferred stock.
Learn more about stockholders here
https://brainly.com/question/18523103
#SPJ9
Stam Company shows the following costs for three jobs worked on in April. Job 306 Job 307 Job 308 Balances on March 31 Direct materials (in March) $ 33,600 $ 41,900 Direct labor (in March) 24,600 20,300 Applied overhead (March) 12,300 10,150 Costs during April Direct materials 139,600 226,900 $ 102,300 Direct labor 94,200 161,500 107,300 Applied overhead ? ? ? Status on April 30 Finished (sold) Finished (unsold) In process Additional Information Raw Materials Inventory has a March 31 balance of $91,500. Raw materials purchases in April are $504,600, and total factory payroll cost in April is $388,300. Actual overhead costs incurred in April are indirect materials, $52,300; indirect labor, $25,300; factory rent, $34,300; factory utilities, $21,300; and factory equipment depreciation, $55,600. Predetermined overhead rate is 50% of direct labor cost. Job 306 is sold for $650,000 cash in April.
Answers
Based on the cost of production by Stam Company, the overhead rate which is applied to the jobs are:
Data and Calculations:
Job 306 Job 307 Job 308
Balances on March 31
Direct materials used (in March) $33,600 $41,900
Direct labor used (in March) $24,600 $20,300
Overhead applied (March) $12,300 $10,150
Costs during April
Direct materials used $139,000 $226,900 $102,000
Direct labor used $94,200 $161,500 $107,300
Overhead applied $55,600 $77,500 $52,500
($94,200 × 50%) ($161,500 × 50%) ($107,300 × 50%)
Job 306 - $47,100
Job 307 - $80,750
Job 308 - $53,650
The overhead rate applied for Job 306 in April is:
= Direct labor cost x 50%
= 94,200 x 50%
= $47,100
The overhead applied for Job 307 in April is:
= 161,500 x 50%
= $80,750
The overhead for Job 308 in April is:
= 107,300 x 50%
= $53,650
Hence, based on the cost of production by Stam Company, the overhead rate applied to the jobs are calculated above.
The given question is incomplete, the complete question is-
Stam Company shows the following costs for three jobs worked on in April. Job 306 Job 307 Job 308 Balances on March 31 Direct materials (in March) $ 33,600 $ 41,900 Direct labor (in March) 24,600 20,300 Applied overhead (March) 12,300 10,150 Costs during April Direct materials 139,600 226,900 $ 102,300 Direct labor 94,200 161,500 107,300 Applied overhead ? ? ? Status on April 30 Finished (sold) Finished (unsold) In process Additional Information Raw Materials Inventory has a March 31 balance of $91,500. Raw materials purchases in April are $504,600, and total factory payroll cost in April is $388,300. Actual overhead costs incurred in April are indirect materials, $52,300; indirect labor, $25,300; factory rent, $34,300; factory utilities, $21,300; and factory equipment depreciation, $55,600. Predetermined overhead rate is 50% of direct labor cost. Job 306 is sold for $650,000 cash in April.
Enter debits before credits. Transaction General Journal Debit Credit a. Record entry Clear entry View general journal 4. Prepare a schedule of cost of goods manufactured for the month end April 30. Stam Company Schedule of Cost of Goods Manufactured For Month Ended April 30 Total manufacturing costs Total cost of work in process Cost of goods manufactured.
To learn more about the overhead rate here:
https://brainly.com/question/15187056
#SPJ1
The June 30, 2021, year-end trial balance for Askew company contained the following information: Account Debit Credit Inventory, 7/1/2020 33,900 Sales revenue 399,000 Sales returns 13,900 Purchases 259,000 Purchase discounts 7,900 Purchase returns 11,900 Freight-in 20,800 In addition, you determine that the June 30, 2021, inventory balance is $41,900. Required: Calculate the cost of goods sold for the Askew Company for the year ending June 30, 2021.
Answers
Answer:
$252,000
Explanation:
Calculation for the cost of goods sold for the Askew Company for the year ending June 30, 2021.
First step is to calculate the Net Purchase
Purchases 259,000
Less Purchase discounts (7,900)
Less Purchase returns (11,900)
Add Freight-in 20,800
Net purchase 260,000
Now let calculate the cost of goods sold
Inventory, 7/1/2020 33,900
Add 260,000
Less inventory balance ($41,900)
Cost of goods sold $252,000
Therefore the cost of goods sold for the Askew Company for the year ending June 30, 2021 will be $252,000
Match the descriptions to the appropriate accounting terms.
Answers
Answer:Um so I DONT KNOW ASK UR MOM OR UR DAD MAN SRRY DONT KNOW THIS ONE IM IN 5 GRADE SRRY
Explanation:
SRRY.;(
what is the purpose of IDP
Answers
The basic purpose of IDP is to assist the employees in their career and personal development.
What do you mean by purpose?The purpose means the reason for which something can be done or created.
The basic purpose of IDP is to help employees for reaching short and long-term career goals as well as to improve their current job performance.
Learn more about Purpose here:
https://brainly.com/question/24763308
#SPJ1
In the case of an undisclosed principal, a third party
Answers
2 words that ryme on the same line is called?
Answers
Answer:A couplet usually consists of two successive lines that rhyme and have the same metre. A couplet may be formal (closed) or run-on (open). In a formal (or closed) couplet, each of the two lines is end-stopped, implying that there is a grammatical pause at the end of a line of verse.
Explanation:Hoped this helped u kind sir or ma'am and have an great day! And also may i plz have brainlist?
Question #1
A business organization that has members is a(n)
O Sole proprietorship
O Corporation
O Partnership
O LLC
Answers
Answer:
O LLC
Explanation:
Owners of a limited liability company, LLC are called its members. An LLC is formed by at least one member but has no upper limit. Members of an LLC may opt to get involved in managing business affairs. They enjoy unlimited liabilities to the debts of the entity. LLC members can be compared to the shareholders of a corporation.
A contestant asks for 200,000 for 25% of their business, what value have they placed on their entire company?
Answers
Answer:
$800,000
Explanation:
25% of the business is equal to 200,000, according to the contestants.
The entire company value is equivalent to 100%
25% = 200,000
100% = ?
100% = 200,000/25 x 100
=$8,000 x 100
=$800,000
On October 1, 2020, Jackson Chemical was identified as a potentially responsible party by the Environmental Protection Agency. Jackson's management along with its counsel have concluded that it is probable that Jackson will be responsible for damages, and a reasonable estimate of these damages is $5,000,000. Jackson's insurance policy of $9,000,000 has a deductible clause of $500,000. How should Jackson Chemical report this information in its financial statements at December 31, 2020
Answers
Answer:
Jackson Chemical should report the $5,000,000 loss because we don't know if the insurance will actually pay out the policy.
Explanation:
Jackson chemical has to report $500,000 loss associated with the deductible would be accrued as liability in the company's financial statements at Dec 31, 2020 since it is probably that Jackson will be responsible for the damages.
$500,000 is the amount of the insurance policy's deductible Jackson will have to pay to receive the policy's benefits, which will cover the reasonably estimated damages.
Which of the following problems are likely to be encountered in distribution?
i) Spoilage of goods
ii) Inadequate warehousing
iii) Ineffective communication
Answers
You need enough to meet your sales demands, so run some numbers on how much you need to meet these demands.
You need to have good communication with your employees, employers, and investors. If you don’t, things can go terribly wrong! Make sure you don’t make this rookie mistake! Set up something so you have good communication with the people you work with.
Good luck!!!
How does a 12 year old get a lot of money
Answers
Answer:
babysitting, walking dogs, mowing lawns, shoveling snow,
Explanation:
Answer:
Explanation:
1)) babysitting
2)) small bussiness
3)) pet sitting
4)) yard work
5)) house sitting
6)) household work
7)) odd jobs
GL!
2. How would each of the following affect the demand for money ? a a tax on bonds held by individuals b . a forecast by the Central bank that interest rates will rise sharply in the next quarter
Answers
automating business procedures and automatically maintaining data integrity and consistency are trivial in a modern business environment.
Answers
The transactional command used to save changes made by a transaction to the database is called COMMIT. Every transaction that has occurred since the last ROLLBACK or COMMIT command is saved to the database with the COMMIT command.
Which type of data can be utilised in SQL Server's table Mcq to store time?
You must add a column with the TIME data type if you want the time to be stored in the column of your table. By default, the TIME data type holds the time in "HH:MM:SS" format. You can obtain the time from the SQL table's column by using the SELECT command.
Why are SQL-written procedures and functions faster than Java-written functions for the same task?
Procedures are faster than clients since they are stored on the database server. It will enable you to complete all challenging questions more quickly. By using procedures, you may avoid writing duplicate code and take advantage of extra SQL features like calling stored functions.
To know more about automating business visit;
https://brainly.com/question/29550293
#SPJ4
Complete this question by entering your answers in the tabs below.
Req 1Req 2Req 3 to 5Req 6
Prepare a contribution format income statement.
Todrick Company
Contribution Format Income Statement
Sales $480,000
Variable expenses:
Cost of goods sold $16,000
Selling expense 24,000
Administrative expense 40,000
80,000
Contribution margin 96,000
Fixed expenses:
Administrative expense $19,200
Selling expense
19,200
Net operating income $28,800
Req 1Req 2
Answers
The necessary entry to illustrate the information is written below.
How to depict the entriesOne of a company's financial accounts, the income statement or profit and loss account, lists the company's receipts and outgoings for a specific time period.
Sales $ 480,000
Variable Expenses
COGS $ 336,000
Selling Expenses $ 24,000
Admin Expenses $ 24,000
$ 384,000
Contribution Margin $ 96,000
Selling Expenses $ 48,000
Admin Expenses $ 19,200
$ 67,200
Net Income $ 28,800
Sales $ 480,000
Variable Expenses
COGS $ 336,000
$ 336,000
Gross Margin $ 144,000
Selling Expenses $ 72,000
Admin Expenses $ 43,200
$ 115,200
Net Income $ 28,800
Learn more about contribution on:
https://brainly.com/question/14852051
#SPJ1
Karane Enterprises, a calendar-year manufacturer
Answers
Karane generated taxable income in 2018 of $1,732,500 for purposes of computing the 179 expense.
What is income?The amount of money, property, and other transfers of value obtained over a predetermined period of time in return for services or goods are often referred to as "income."
Income is defined in accordance with the context in which the word is employed; there is no single, universal definition. Income from the selling of goods or services is one type of business income that is permissible.
For instance, a person's fees from the regular practice of a profession are considered business revenue. Rent payments made by a real estate investor are considered
business revenue.
Income is the cash that a person or organization receives in return for working, producing a good or service, or using capital.
People normally make money through wages or salaries, whereas corporations make money by selling goods or services for more than it costs to produce them.
Learn more about income, here
https://brainly.com/question/14732695
#SPJ1
how you been issued or are currently eligible for a form 1-551 permeanent resident card, also known as a green card by the u.s. citizenship and immigration services uscis?
Answers
The official name of your permanent residence card is Form I-551 (aka green card). Find out more about it and typical inquiries.
What does the green card I551 card number on the permanent residency card mean?Your green card number is a 13-digit number that is printed on a permanent residence card and is also referred to as the receipt number. It also goes by the name "case number" because it identifies your particular immigration case. It may even be referred to as an I-551 receipt number in some circumstances.
What document, such as a PRC or I-551, serves as proof of your immigration status?A green card is applied for using Form I-551. It serves as evidence of a foreign national's eligibility for permanent residence and employment in the United States. If you If you look closely, the current green card's backside has "I-551" printed in the upper left corner.
To know more about U.S citizenship visit:-
https://brainly.com/question/30828272
#SPJ9
Addison, Inc. uses a perpetual inventory system. The following is information about one inventory item for the month of September:
Sep. 1 : Inventory20 units at $20
Sep. 4 : Sold10 units
Sep. 10 : Purchased30 units at $25
Sep. 17 : Sold20 units
Sep. 30 : Purchased10 units at $30
a) If Addison uses LIFO, the cost of the ending merchandise inventory on September 30 is:___________.
a.$800
b.$750
c.$650
d.$700
b) If Addison uses FIFO, the cost of the ending merchandise inventory on September 30 is:__________.
a.$800
b.$700
c.$650
d.$750
Answers
Answer:
lLIFO-option B is correct ,$750
FIFO-option A is correct,$800
Explanation:
In using LIFO, each item sold is from the last inventory received while the FIFO is of the opinion that item sold is the oldest stock of inventory.
Under LIFO, cost of ending merchandise is as follows:
10 units (20-10) at $20=$200
10 units (30-20) at $25=$250
10 units at $30 =$300
Total value of inventory =$750
The correct option is B,$750
Under FIFO, cost of ending inventory is as follows:
20 units at $25 =$500
10 units at $30 = $300
total value of inventory =$800
The correct option is A,$800
List 10 ways you can apply green computing to your daily life.
Answers
1. Making Purchases from Businesses That Have a Commitment to the Environment
2. Taking Part in Programs for Recycling Electronic Equipment
3 Implementing Virtualization and Other Technologies
4 Reducing the Amount of Printed Material and Recycling Paper
5 Power down your computer and monitor
6. Modify the level of Brightness
7 Refrain from Utilizing a Screen Saver
8 Disconnect All Extraneous Devices
9 Make sure your printer is turned off.
10 Printed on Both Sides of the Sheet
This is further explained below.
What is computing?Generally, Computer refers to any goal-oriented activity that requires or benefits from the use of computing hardware or that creates such machinery.
The investigation and testing of algorithmic processes, as well as the creation of both hardware and software, are included in this field.
In conclusion,
1. Making Purchases from Businesses That Have a Commitment to the Environment
2. Taking Part in Programs for Recycling Electronic Equipment
3 Implementing Virtualization and Other Technologies
4 Reducing the Amount of Printed Material and Recycling Paper
5 Power down your computer and monitor
6. Modify the level of Brightness
7 Refrain from Utilizing a Screen Saver
8 Disconnect All Extraneous Devices
9 Make sure your printer is turned off.
10 Printed on Both Sides of the Sheet
Read more about Computing
https://brainly.com/question/21080395
#SPJ1
The Whitt Window Company is a company with only three employees that makes two different kinds of handcrafted windows: a wood-framed and an aluminum framed window. They earn $60 profit for each wood-framed window and $30 profit for each aluminum-framed window. Doug makes the wood frames and can make 6 per day. Linda makes the aluminum frames and can make 4 per day. Bob forms and cuts the glass and can make 48 square feet of glass per day. Each CI wood-framed window uses 6 square feet of glass and each aluminum-framed window uses 8 square feet of glass. The company wishes to determine how many windows of each type to produce per day to maximize total profit. Describe the analogy between this problem and the Wyndor Glass Co. problem discussed in Section 2.1. Then construct and fill in a table like Table 2.1 for this problem, identifying both the activities and the resources. Identify verbally the decisions to be made, the constraints on these decisions, and the overall measure of performance for the decisions. Convert these verbal descriptions of the constraints and the measure of performance into quantitative expressions in terms of the data and decisions. Formulate a spreadsheet model for this problem. Identify the data cells, the changing cells, and the objective cell. Also show the Excel equation for each output cell expressed as a SUMPRODUCT function. Then use Solver to solve this model. Indicate why this spreadsheet model is a linear programming model. Formulate this same model algebraically. Identify the decision variables, objective function, nonnegativity constraints, functional constraints, and parameters in both the algebraic version and spreadsheet version of the model. Use the graphical method to solve this model. A new competitor in town has started making wood- LOS framed windows as well. This may force the company to lower the price it charges and so lower the profit made for each wood-framed window. How would the optimal solution change (if at all) if the profit per wood-framed window decreases from $60 to $40? From $60 to $20? Doug is considering lowering his working hours, which would decrease the number of wood frames he makes per day. How would the optimal solution change if he only makes 5 wood frames per day?
Answers
a) We wish to determine the ideal levels of two operations that fight for scarce resources, just like in the Wyndor Glass Co.
Wbe the desired quantity of wooden framed windows.
Tell Abe how many windows with aluminum frames to make.
b) The choice is how many windows of each type to manufacture. The quantity of glass, metal, and wood that is available limits the options. Moreover, it is impossible to have negative production levels.
The anticipated profit serves as the primary performance indicator for the decisions.
c) Profit = $60 (wooden frames) + $30 (aluminum frames).
e) Because the decisions are represented by altering cells, which can take on any value as long as it complies with the restrictions, this model is a linear programming one.
A data cell is on the right, a mathematical sign is in the center, and an output cell is on the left for each constraint. The target cell represents the entire performance level, and maximizing that cell is the goal.
Also, each output cell's Excel equation is written as a SUMPRODUCT function, where each term in the total represents the union of a data cell and a changing cell.
h) The Optimal Solution (W, A) = (x1, x2)
Optimal Solution = (6, 1.5), with P = $405.
The solution remains the same when the profit per wooden window is $40 and P is $285.
i) In the case when the profit per wood-framed window is $20 and
P = $173.33,
The optimal solution (W, A) = (2.667, 4)
j) If Doug can only produce 5 wood frames every day,
the Optimal Solution (W, A) = (5, 2.25)
and P = $367.50.
To learn more about Optimal Solution, please refer:
https://brainly.com/question/14914110
#SPJ4
Consider total cost and total revenue, given in the following table:
In the final column, enter profit for each quantity. (Note: If the firm suffers a loss, enter a negative number in the appropriate cell.)
Total Cost Marginal Cost
(Dollars)
Quantity (Dollars)
0
1
2
3
4
5
6
7
5
6
8
11
15
20
26
35
05
06
07
Total Revenue Marginal Revenue
(Dollars)
(Dollars)
0
6
12
18
24
30
36
42
AAAAAAA
Profit
(Dollars)
In order to maximize profit, how many units should the firm produce? Check all that apply.
04
Answers
The solution to the given question when we consider total cost and total revenue, given in the following table:
The Financial TableQuantity | Total Cost | Marginal Cost | Total Revenue | Marginal Revenue | Profit
------- | -------- | -------- | -------- | -------- | --------
0 | 5 | 5 | 0 | 0 | -5
1 | 11 | 6 | 6 | 6 | 1
2 | 17 | 6 | 12 | 6 | 5
3 | 24 | 7 | 18 | 6 | 4
4 | 31 | 8 | 24 | 6 | -7
5 | 39 | 8 | 30 | 6 | -9
6 | 47 | 8 | 36 | 6 | -11
7 | 55 | 8 | 42 | 6 | -13
As you can see, the firm's profit is maximized at quantity 3. This is because the marginal revenue is equal to zero at this point, which means that the firm is not making any additional profit by producing more units. In fact, if the firm produces more units, it will actually start to lose money.
Therefore, the answer to the question is 3.
In summary:
The firm's profit is maximized at quantity 3.This is because the marginal revenue is equal to zero at this point.If the firm produces more units, it will start to lose money.Therefore, the answer to the question is 3.Read more about marginal revenue here:
https://brainly.com/question/13444663
#SPJ1
A dress manufacturer would consider the cost of relatively inexpensive items like thread to be part of ______.
a. administrative costs
b. indirect materials
c. manufacturing overhead
d. direct materials
Answers
A dress manufacturer would consider the cost of relatively inexpensive items like thread to be part of indirect materials and manufacturing overhead.
What is indirect materials?Even though they are used throughout the manufacturing process, indirect materials are not included in the finished product. While disposable gloves, PPE, tape, and other items may be required for a production line, the actual product produced on that line may not include any of these items.
Manufacturing overhead (MOH) is the sum of all indirect costs incurred during the production of a product. It is included in the price of the finished product, along with the costs of direct materials and direct labor.
Therefore, options B and C are correct.
Learn more about indirect materials:
brainly.com/question/17033881
#SPJ1
NEED HELP ASAP
In the circular flow diagram with government, what does the government provide directly to firms?
A. expenditures
B. factors of production
C. taxes
D. goods and services
Answers
In the circular flow diagram, the government provides goods and services directly to firms. The correct option is D.
In the circular flow diagram, the government provides goods and services directly to firms. This is represented by the flow of resources from the government sector to the business sector.
The government plays a significant role in the economy by providing public goods and services that are necessary for the functioning of the society as a whole.
Public goods include infrastructure projects like roads, bridges, and public utilities, as well as services such as defense, law enforcement, and education.
These goods and services are not typically provided by private firms, so the government steps in to ensure their provision.
By supplying goods and services directly to firms, the government facilitates the production process and supports the overall functioning of the economy.
This enables businesses to operate efficiently and effectively, contributing to economic growth and development.
For more such questions on circular flow diagram
https://brainly.com/question/27515451
#SPJ8
Which of the following is not an example of a multichannel retailer?
Answers
Answer:A
thats the one
Explanation:
McDonals is the example of multichannel retailer as the company is providing burgers and fries to its different outlets and in diffrent food ordering sites in many countries.
What is multichannel retailer?The technique of selling similar products over multiple channels and platforms is known as multichannel commerce.
The platforms can be both online and offline, with different channels such as brick and mortar stores, online stores, mobile stores, and mobile app stores.
Thus, McDonals is the example of multichannel retailer.
For more details about multichannel retailer, click here
https://brainly.com/question/13125283
#SPJ2
Department 1 of a two department production process shows: Units Beginning Work in Process 10,000 Ending Work in Process 50,000 Total units to be accounted for 160,000 How many units were transferred out to Department 2?
Answers
Answer:
20000 for ending work 100000 total & 320000 are accounted for
Consider a firm redesigning its logistics network. What are the advantages of having a small number of centrally located warehouses? What are the advantages of having a larger number of warehouses closer to the end customers?
Answers
Small centrally located warehouses offer cost efficiency and simplified inventory management, while larger warehouses closer to customers provide faster delivery, better customer service, and cost savings in shipping.
Having a small number of centrally located warehouses offers several advantages in a firm's logistics network:
Cost Efficiency: Centralized warehouses can lead to cost savings in terms of inventory management, transportation, and operational overheads. With fewer warehouses, the firm can benefit from economies of scale in procurement, storage, and distribution.
Simplified Inventory Management: Managing inventory becomes more streamlined when there are fewer warehouses. It allows for better control and visibility over stock levels, reducing the risk of stockouts or overstocking.
Faster Transit Times: With centrally located warehouses, products can be shipped more quickly to various regions since they are closer to major transportation hubs. This reduces lead times and improves overall customer satisfaction.
Improved Coordination: Centralized warehouses facilitate better coordination and synchronization of supply chain activities. It becomes easier to manage inbound and outbound logistics, optimize transportation routes, and consolidate shipments.
On the other hand, having a larger number of warehouses closer to end customers provides the following advantages:
Faster Delivery: Proximity to end customers enables faster order fulfillment and delivery. Products can reach customers more quickly, reducing transit times and improving responsiveness.
Enhanced Customer Service: Local warehouses allow for better customization and personalization of service. They can cater to specific regional preferences, offer faster response times to customer queries, and handle returns or exchanges more efficiently.
Lower Shipping Costs: By locating warehouses closer to customers, transportation costs can be reduced as products travel shorter distances. This can lead to cost savings in shipping expenses.
Flexibility and Redundancy: Having multiple warehouses distributed geographically provides redundancy and flexibility in the supply chain. It mitigates the risk of disruptions, such as natural disasters or transportation issues, as the firm can rely on alternative warehouse locations.
In summary, a small number of centrally located warehouses offer cost efficiency and streamlined inventory management, while a larger number of warehouses closer to end customers provide faster delivery, improved customer service, lower shipping costs, and increased flexibility.
For more question on warehouses visit:
https://brainly.com/question/23941356
#SPJ8
Production is an example of a marketing activity.
Question 1 options:
True
False
Answers
To better evaluate the denials of Medicare claims at ABC Hospital, Shelly (the Coding Manager) and
Diane (the Fiscal Claims Manager) must work together to review documentation, ICD-10-CM/PCS code and MS-DRG assignment, and CMS denial reasons. In order to ensure an effective working environment to efficiently manage and produce MS-DRGs and the reimbursement claims, the and the departments should have a strong relationship.
(A) Medical staff and billing
(B) Finance and billing
(C) Disclosure of health information staff and coders
(D) HIM and billing staff
Answers
Answer:
D.
Explanation:
The committee on professional development of AHIMA states that health information management (HIM) professionals are responsible for improving “the quality of healthcare by insuring that the best information is available for making any healthcare decision” by managing healthcare data and information resources.
Volatile price changes, technological changes, and government intervention are what type of risks?
Answers
Volatile price changes, technological changes, and government intervention are external risks that can impact a company's operations and performance.
What are Volatile price changesVolatile price changes refer to fluctuations in input or product prices, which can affect profitability and cost structure. Technological changes can introduce advancements or disrupt an industry, requiring companies to adapt to avoid becoming obsolete.
Government intervention, through regulatory changes or policies, can create uncertainties and challenges for companies, affecting operations, costs, and market access.
To mitigate these risks, companies should implement risk management strategies such as diversification, contingency planning, staying informed about market trends, investing in R&D, and engaging with government stakeholders.
Read mroe on Volatile price changeshere https://brainly.com/question/30000522
#SPJ1