ACL access will be revoked in the future aws redshift

Answer:

That's not true, if your house is burning down, leave. Let the firefighters do their jobs.

Explanation:

Technician A is correct. The high-pressure pump and the injectors are expected to return a little amount of fuel to the tank. The term "fuel return" or "fuel recirculation" refers to this.

To maintain proper fuel pressure and circulation, many fuel systems return a part of the fuel that is not injected into the engine to the fuel tank. This lessens vapour lock and cools the injectors.

The fuel return system's main functions are to control fuel pressure and guarantee the fuel system's effective operation. Without fuel return, the fuel system could become overly pressurized, which could result in damage or failure.

Learn more about injectors here:

brainly.com/question/31723485

#SPJ4

Answer:

I can help but I need to know what it looking for

Answer:

The answer to the question is True

On wet roads, the chance of hydroplaning increases with the increase of speed. Thus, the given statement is true.

During rainy weather, roads may become slippery and difficult to drive on. Slippery roads may also arise as a result of snow or ice. The fact that the road surface has less traction than normal is what makes it slippery. On slippery roads, it is recommended that drivers slow down to reduce the risk of skidding, sliding, or losing control of their cars, especially when taking turns.

Drivers should also increase their following distance and avoid abrupt braking or accelerating. Drivers should not drive faster than 25 mph on slippery roads, and they should not increase their speed to avoid hydroplaning. Instead, drivers should slow down.

Learn more about slippery roads:

brainly.com/question/1213174

#SPJ4

Solution :

As the plane is flying in the air, the force of weight is pulling the plane down. This force must be equal to the force of lift which is generated from the plane's translation true the air. Therefore, the next condition must be satisfied.

\($F_W= L $\)  ................. (i)

The lift force of the plane is given by :

\($L=C_V \frac{\rho}{2} V^2 A$\)

Since the weight force of the plane is given, from the condition (i), we also know the intensity of the lift force.

Therefore, we transform the lift force expression to derive the lift coefficient formula:

\($C_L=\frac{2L}{\rho V^2 A}$\)

\($C_L=\frac{2 \times 1700}{2.38 \times 10^{-3 }\times (167.2)^2 \times 178} $\)

\($C_L = 0.287$\)

Answer:

The answer is below

Explanation:

Given that:

\(k_t=torque\ constant=0.075\ Nm/A\\\\k_v=voltage\ constant=0.12\ V/(rad/sec)\\\\R_a=armature \ resistance=2.5 \Omega\\\\V_t=terminal\ voltage=24\ V\\\\a)The \ starting\ current\ I_a\ is\ given \ as:\\\\I_a=\frac{V_t}{R_a} =\frac{24}{2.5} =9.6\ A\\\\The \ starting\ torque(T)\ is:\\\\T=k_tI_a=0.075*9.6=0.72\ N.m\)

b) The maximum speed occurs when the terminal voltage and back emf are equal to each other i.e.

\(V_t=e_b=k_v\omega\\\\\omega=\frac{V_t}{k_v}=\frac{24}{0.12} =200\ rad/s\)

c) The load torque is given as:

\(T_L=0.0125\Omega\\\\The\ motor\ torque \ is:\\\\T=k_t(\frac{V_t-k_v\omega}{R_a} )\\\\but\ T = T_L,hence:\\\\0.0125\omega=0.075(\frac{24-0.12\omega}{2.5} )\\\\0.03125\omega=1.8-0.009\omega\\\\0.04025\omega=1.8\\\\\omega=44.72\ rad/sec\\\\N=\frac{60\omega}{2\pi} =\frac{60*44.72}{2\pi} =427\ rpm\)

True, it should come from behind the electrode and

between the base metal and the electrode.

True is the correct answer.

The airstream should penetrate or come between the base metal and the electrode from the back during the CAC-A operation.

To know more click here-

https://brainly.com/question/28346741

#SPJ2

It is important to keep welders properly tuned because it "Reduces air pollution" (Option A).

Welding machinery, welding guns, and welders are among the most important items for a welding expert to have. Welding machines provide heat that melts steel pieces, allowing them to be bonded.

Most welders also use an angle grinder to smooth out joints, wire brushes to clean or abrade steel surfaces before welding etc.

Learn more about welding:
https://brainly.com/question/4695733
#SPJ1

Full Question:

Why is it important to keep portable welders properly tuned?

a-Reduce air pollution

b-So they run quieter

c-To produce smoother welding current

d-All of the above

Answer:

Zero

Explanation:

For this, it is necessary to use the  the Hagen-Poiseuille equation, which is a law of physics that describes an incompressible fluid of low viscosity through a tube of constant circular cross-section.

By derivating the Pressure over x it becomes zero

\(\frac{dP}{dx} = 0\)

Answer:

The thing that separates the work of technology transfer research from implementation of the products of such research is:

Technology transfer research looks at how technology may be transferred but does not actually make the transfer.

Explanation:

This suggests that technology transfer research is different from the technology transfer (implementation) itself.  The first stops at making scientific investigations into technology transfer activities while the next step performs the actual transfer or implementation.  In other words, technology transfer conveys the results of scientific and technological research to the marketplace and to the wider society.  It is the bridge-builder between the research and the implementation.

The probability that none of the letters A, B, C, D , and E is in the correct position is 11/30

probability that none of them is in the right position

= 1 - Probability they are in right positions

probability is solved with the formula

= required outcome / total outcome

5 letters can be arranged in 5! ways, hence total outcome

= 5!

= 5 * 4 * 3 * 2 * 1

= 120 ways

There is 5 required outcome of positioning the letters right

1. chance that all the letters are in the right position = 1

2. chance that 4 of the letters are in the right position = 0

This is zero because it is same as the first. If 4 are in the right position the all are in the right position.

3. chance that 3 of the letters are in the right position

= ⁵C₃ * 1

= 10

4. chance that 2 of the letters are in the right position

= (⁵C₂) * 2

= 10 * 2

= 20

5. chance that 1 of the letters are in the right position

= (⁵C₁) * 9

= 5 * 9

= 45

sum of the outcomes = 76

probability = required outcome / total outcome

= 76/120

probability that none of them is in the right position

= 1 - 76/120

= 11/30

Learn more on probability at:

https://brainly.com/question/251701

#SPJ1

Answer:

Answer to the following is as follows;

Explanation:

A request for proposal is a documentation that invites prospective contractors to submit business opportunities to an agency or corporation interested in procuring a commodities, product, or valuable resource through a bid procedure.

A request for proposal (RFP) is a commercial document that introduces a project, defines it, and invites eligible contractors to compete on its completion.

Engineers explore biology, chemistry, and physics for use in real-world scenarios.

Engineers are professionals who use their knowledge of mathematics, science and engineering principles to design, develop, test and maintain a variety of systems, products, and processes.

They are mechanical engineering, electrical engineering, architecture, chemical engineering and many more. Engineers play an important role in shaping the modern world and developing new technologies that benefit society.

Therefore, engineers explore biology, chemistry, and physics for use in real-world scenarios.

learn more about engineers: https://brainly.com/question/17169621

#SPJ4

The purposes of audit documentation are as follows:

1. Supporting the Audit Opinion: Audit documentation serves as evidence to support the audit opinion expressed by the auditor. It provides a record of the procedures performed, evidence obtained, and conclusions reached during the audit. This documentation is crucial in demonstrating the auditor's professional judgment, compliance with auditing standards, and the basis for forming an opinion. It helps to ensure the credibility and reliability of the audit process.

2. Facilitating Review and Quality Control: Audit documentation allows for the review and quality control of the audit work. It enables another auditor or supervisor to assess the adequacy, sufficiency, and appropriateness of the procedures performed and the evidence obtained. Through review, potential errors, omissions, or inconsistencies can be identified and rectified, ensuring the overall quality of the audit engagement.

3. Promoting Accountability and Professionalism: Audit documentation promotes accountability by providing a documented trail of the work performed. It helps to demonstrate compliance with auditing standards, professional ethics, and legal requirements. Properly documented audit work also supports the professional reputation of the auditor and the auditing firm by showcasing a systematic and disciplined approach to the audit process.

4. Facilitating Future Audits and Inquiries: Audit documentation serves as a reference for future audits and inquiries. It provides a historical record of the client's financial statements, audit procedures, and significant findings. This documentation assists subsequent auditors in understanding the client's business, identifying areas of risk or concern, and building upon prior audit work. It also helps in responding to inquiries from regulatory bodies, external stakeholders, or legal proceedings.

5. Enhancing Continuity and Knowledge Sharing: Audit documentation promotes continuity and knowledge sharing within the auditing firm. It allows auditors to refer back to prior engagements, understand the client's history, and maintain consistency in approach and methodologies. It facilitates the transfer of knowledge between auditors, enabling the accumulation of institutional knowledge and promoting professional development within the auditing firm.

Each purpose of audit documentation is important as it contributes to the overall effectiveness, reliability, and professionalism of the audit process. It ensures the audit work is well-documented, reviewable, accountable, and serves as a valuable resource for future audits and inquiries.

learn more about "audit":- https://brainly.com/question/20713734

#SPJ11

Answer:

Angle Iron

Explanation:

Mark brainliest please.

A D flip-flop watches the input and makes transitions that mirror those of the input D. It is also referred to as a D latch, a "data" flip-flop, or a "delay" flip-flop. Thus, option B is correct.

This flip-flop stores the value that is on the data line; the D stands for "data." It can be compared to a simple memory cell.

When S (Set) and R (Reset) are both 0, as they are in an active high SR Flip Flop, the output of the latch will not vary, however when both S and R are 1, the output of the latch is completely unpredictable. When S and R are both 1, it constitutes an active low SR Flip Flop.

Therefore, There won't be any change in the latch's output, and when both S and R are 0, the latch's output is completely unpredictable.

Learn more about D flip-flop here:

https://brainly.com/question/15569602

#SPJ4

fertile, infertile and corroded soil

Answer:

10.203 Volts

Explanation:

For this problem, we need to understand that a series resistive circuit is simply a circuit with some type of voltage source and some resistors, in this case, R1 and R2.

First, we need to find the voltage in the circuit.  To do this, we need to find the total resistance of the circuit.  When two resistors are in series, you sum the resistance.  So we can say the following:

R_Total = R1 + R2

R_Total = 570 Ω + 560 Ω

R_Total = 1130 Ω

Now that we have R_Total for the circuit, we can find the voltage of the circuit by using Ohm's law, V = IR.

V_Total = I_Total * R_Total

V_Total = 17.9 mA * 1130 Ω

V_Total = 20.227 V

Now that we have V_Total, we can find the voltage drop across each resistor by using Ohm's law once more.  Note, that since our circuit is series, both resistors will have the same current (I.e., I_Total = I_1 = I_2).

V_Total = V_1 + V_2

V_Total = V_1 + I_2*R2

V_Total - I_2*R2 = V_1

20.227 V - (17.9 mA * 560 Ω) = V_1

20.227 V - (10.024 V) = V_1

10.203 V = V_1

Hence, the voltage drop across R1 is 10.203 Volts.

Cheers.

Answer:

Carburetor flooding, engine stalling, and hard starting

Explanation:

If the fuel return hose becomes blocked or kinked it may cause the carburetor to flood from excessive fuel or pressure buildup.

Answer:

  4.94 kW

Explanation:

The heat energy produced by the fuel in one hour is ...

  (2.29 L/h)(0.749 kg/L)(43.7 MJ/kg) = 74.954677 MJ/h

Then the power output is ...

  (74.954677 MJ/h)(1 h)/(3600 s) = 20.8207 kJ/s

Multiplying this heat energy by the efficiencies of the processes involved, the output power is ...

  (20.8207 kW)(0.25)(0.95) = 4.94 kW

The correct option for the implication of low variety is B) Flexibility needed. Variety refers to the number of different products, services, or activities that an organization offers. High variety means that a company offers a wide variety of products or services, while low variety means that a company provides a limited range of products or services.

One of the implications of low variety is that customers have limited options. They are restricted to purchasing only those goods and services that the company offers, which may not match their requirements or preferences. This may lead to losing customers to rivals who offer a greater variety of goods and services.

In the case of low variety, it is critical to have the required flexibility. Customers may ask for certain specific goods or services that are not provided by the company. To meet customer requirements, the company should be adaptable and able to rapidly respond to customer requests by expanding its product line. As a result, low variety necessitates the need for flexibility.

The other given options are not valid. Low unit cost is not related to low variety. Unit cost may be affected by economies of scale and other factors, but it is not directly related to variety. High complexity is not related to low variety as well. As the range of goods and services offered by the company increases, the complexity of the company's operations and management also increases. Matching customers' specific needs is partially correct because the company cannot match customer specific needs in low variety. In low variety, the company has a limited range of goods and services, so it is not possible to fulfill all the customers’ specific needs.

Know more about implication of low variety  here:

https://brainly.com/question/32400070

#SPJ11

Answer:

a) Db = 10.05 in

b) The operation is not feasible

Explanation:

Let's begin by listing out the given variables:

Thickness = 1/8 in, Height (h) = 3.8 in,

Diameter (Dp) = 5 in ⇒ rp = Dp ÷ 2 = 5 ÷ 2 = 2.5 in

a) Area of cup = Area of wall + Area of base

A = 2πh(rp) + π(rp)²

A = (2π * 2.5 * 3.8) + (π * 2.5²)

A = 59.69 + 19.635 = 79.325 in²

A ≈ 79.33 in²

But π(rb)² = 79.33 ⇒ rb² = 79.33 ÷ π

rb² = 25.25

rb = 5.025 ⇒ Db = 2 * rb = 2 * 5.025 = 10.05 in

Db = 10.05 in

b) To calculate for feasibility, we use the formula, draw ratio equals diameter of the blank divided by diameter of the punch

Mathematically,

DR = Db ÷ Dp

DR = 10.05 ÷ 5 = 2.01

DR = 2.01

DR > 2 ⇒ the operation is not feasible

For an operation to be feasible, it must have a drawing ratio limit of 2 or lesser

Answer:

Resistance = 3 Ω

Explanation:

As we know that, By Ohm's Law

V = IR

where

V is the voltage in volt

I is the current in amps

R is the resistance in ohm

Now,

Given that,

V = 15 volts

I = 5 amps

So,

R = V/I

  = 15/5

 = 3 Ω

⇒R = 3 Ω

Answer:

subcontracting

Explanation:

I hope this is right

To determine the largest force that can be exerted by the press, knowing that the allowable stress in section A-A is 75 MPa, follow these steps:

Step 1: Identify the allowable stress
The allowable stress in section A-A is given as 75 MPa (megapascals).

Step 2: Determine the area of section A-A
To find the force, you need to know the area of the section A-A. This information should be provided in the problem statement or the diagram of the press. If the area is not given, you will need to calculate it using the dimensions of section A-A (e.g., if it's a circular or rectangular section).

Step 3: Calculate the maximum force
Use the formula: Force = Allowable Stress x Area
Substitute the given values into the formula: Force = 75 MPa x Area of section A-A

Step 4: Convert the force to the appropriate unit
If necessary, convert the force from newtons (N) to another unit (e.g., pounds, kilonewtons, etc.), depending on the context of the problem.

The largest force that can be exerted by the press is the result obtained from the calculation in Step 3.

To know more about stress

https://brainly.com/question/10566565?

#SPJ11

Answer:

What specific fluid goes in the windshield wipers.

Distilled water

How much to put in fluid ounces?

There should be a tiny bit more than 3/4 of the way full.