a
15. What is the preferred repair for 4130 steel tube that may
be visible or adjacent to the fabric covering?

Answers

Answer 1

Answer:

The correct answer to the following question will be "Austenitic stainless steel fillers".

Explanation:

Some manufacturers prefer welding 413 type tubing or pipes to use austenitic filters, this seems to be appropriate because they use 310 as well as 312 stainless additives. Certain fillers made from stainless steel could perhaps provoke crack propagation. A stainless filler surface is generally extra costly.

So that the above would be the right answer.

Answer 2
Austenitic Stainless steel filters

Related Questions

How do science, engineering, and technology depend on each other?

Answers

They both depend on each other to make advances such as how the first computers took up a whole room, but with science the technology shrunk and grew faster leading to faster calculations which causes more development leading to new technology being applied however technology is ran by engineers and science is ran by scientists science is getting information about the natural world and technology applies it for practical use.

Answer:

They depend on each other because science needs the technology engineering makes.

Explanation:

I hope that helps a bit. -^-

What is the volicity of a rocket?

Answers

Answer:

I'm gonna assume you meant velocity.

Explanation:

If a rocket is launched from the surface of the Earth, it needs to reach a speed of at least 7.9 kilometers per second (4.9 miles per second) in order to reach space. This speed of 7.9 kilometers per second is known as the orbital velocity, it corresponds to more than 20 times the speed of sound.

7.9 kilometers per second (4.5 miles per second)

A student places a cube of solid butter at the tip of a metal spoon. The base of the spoon is placed in a pot of hot water so that only the spoon’s base is touching the water.



After a few minutes, the butter starts to melt from the tip of the spoon. Which statement explains the process that causes the butter to melt?

Answers

Answer:

The thermal energy from the pot of water rises into the air and the butter absorbs the heat and the butter slowly change’s from a solid to a liquid.

Explanation: It will melt because when you put the spoon under hot water It will become heated. So when you put butter on it It is going to melt because the things inside of the butter will make it melt

Which of the following refers to a full-scale version of a product used to validate performance?

a )constraint
b) prototype
c) benchmark
d) criteria

Answers

it’s b i’m pretty sure i’m right
I agree with the other person the answer is B

Ava works in a college admissions office. She is involved in reading applications and matching students to the criteria set out by the school for acceptance. If Ava decides that the student qualifies to attend the college, she notifies them. Which pathway in the Education and Training Cluster does Ava’s career fall into?

A. Teaching and Training
B. Administration and Administrative
C. Professional Support Services
D. Science & Mathematics

Answers

Answer: It will be Option C, " Professional support and Services ".

Proof : She is only reading applications that might be related to complaints or admissions, So , Option A and D is incorrect.• She is not in the field of anything related to teaching, therefore, Option B is also incorrect.Now Option C is only remaining. Therefore,Option C is your answer.Hope it helps you...

C.Professional Support Services

Problem 4-2. A steam power plant operates on
an ideal reheat-regenerative Rankine cycle as
shown. Steam at a rate of 75 kg/s enters the high
pressure turbine at 10 MPa and 560°C and leaves
at 0.7 MPa. A fraction of the steam is extracted at
this pressure to heat the feedwater in a closed
feedwater heater. The rest of the steam is reheated
to 500°C and then it is expanded in the low-
pressure turbine to the condenser pressure of 10
kPa. It is assumed that the feedwater leaves the
closed feedwater heater (State 8) at the
condensation temperature of the extracted steam.
a: show the T-a diagram for the cycle, then calculate
B: the net power output
C: The thermal efficiency of the cycle

Answers

Answer:

25.8-26.1

Explanation:

95% sure

Answer:25.8-26.1

Explanation:

my whole engineering class just got yelled at for screaming Queer

my whole engineering class just got yelled at for screaming Queer

Answers

Answer:

leave the classroom

Explanation:

doing this will alllow you do get a f

That happened to me but in 6th grade science

What was your very first engineering design?

Answers

Explanation:

The wedge and the inclined plane (ramp) were known since prehistoric times. ... The earliest architect known by name is Imhotep. As one of the officials of the Pharaoh, Djosèr, he probably designed and supervised the construction of the Pyramid of Djoser (a Step Pyramid) at Saqqara in Egypt around 2630-2611 BC.

So basically yeah so that what you do then you do that then pass me the thing that’s on the thing

does any1 know TERMS OF MEASUREMENT

Answers

Answer:

the kilogram (kg), for mass.

the second (s), for time.

the kelvin (K), for temperature.

the ampere (A), for electric current.

the mole (mol), for the amount of a substance.

the candela (cd), for luminous intensity.

the meter (m), for distance.

Explanation:hoped this helped

There are seven base units in the SI system:

-the kilogram (kg), for mass
-the second (s), for time
-the kelvin (K), for temperature
-the ampere (A), for electric current
-the mole (mol), for the amount of a substance
-the candela (cd), for luminous intensity
-the meter (m), for distance

(This should do you well, so I hope I helped you out)

Which of the following is a valid reason why a scientist might reject a scientific theory
A. Some people disagree with it
B. it cover to Broad a topic
C. New evidence Contradicts it
D. it is too old

Answers

C I think hope it helps :)

Answer:

C. New evidence Contradicts it

Explanatine

Does a food market have any rooms in particular? Also whats units?

Answers

Sometime but mostly climates
Yes not sure about the units tho

Compare and contrast the story "Shadrach, Meshach, and Abed-nego" with the story " William Tell." If you need to, return to the lesson "Analyzing Story Structure" in which the William Tell story is located and reread the story. Identify the similarities and differences of the people in these stories. Follow the instructions below.

Compare and contrast William Tell with Shadrach, Meshach, and Abed-nego.

plsplsplsplsplsplsplspls helppppppppppppppp

Answers

Both stories depict individuals standing up for their beliefs and facing consequences for their actions but the settings, time periods and circumstances surrounding these individuals differ greatly.

How do the stories compare and contrast?

In "William Tell," the titular character is a Swiss patriot living under the rule of the Habsburgs who defies their authority and ultimately becomes a symbol of resistance against their tyranny.

In "Shadrach, Meshach, and Abed-nego," the three protagonists are Jewish captives in Babylon who refuse to worship the king's golden idol, even when faced with death by fiery furnace.

While both stories showcase the courage and determination of their respective protagonists, the motivations behind their actions and the contexts in which they occur are distinct.

Read more about story comparison

brainly.com/question/28700096

#SPJ1

Answer:

Both stories depict individuals standing up for their beliefs and facing consequences for their actions but the settings, time periods and circumstances surrounding these individuals differ greatly.

tell me what it like to be 16 plezzzzzzzzzz

Answers

Being 16 is often considered a transitional age between childhood and adulthood. Many 16-year-olds are starting to develop a stronger sense of independence and may be eager to take on more responsibility. At the same time, they may still be figuring out their identity and place in the world.

For some 16-year-olds, school and academics may become more challenging and stressful, as they may be preparing for important exams or starting to think about college or their future career. Social dynamics can also be complex and may involve navigating peer pressure, romantic relationships, and forming new friendships.

On the positive side, being 16 can be an exciting time of self-discovery and exploration. Many 16-year-olds are starting to engage in new activities and hobbies and may be developing new interests and passions. With increased independence comes the opportunity to make more decisions for oneself and to start shaping one's own future.

Overall, being 16 can be both exciting and challenging, and can set the foundation for important decisions and experiences later in life.

\(\begin{align}\huge\colorbox{black}{\textcolor{yellow}{I hope this helps !}}\end{align}\)

\(\begin{align}\colorbox{purple}{\textcolor{lime}{Please mark as brillinest !}}\end{align}\)

\(\textcolor{red}{\small\textit{Btw I am 17 :)}}\)

Answer:

16-year-olds know that adulthood is not far away, so they will start to show more independence and engage in less conflict with their parents. They also will begin making decisions with that independence in mind. However, their choices may not always feel like the right ones for their parents.

Explanation:

But being 16 years old is awesome because it just is to me

What is the fastest motorcycle in the world? How fast does it go?

Answers

The fastest motorcycle in the world is the Dodge Tomahawk. It can reach a top speed of 420 mph.

Answer:The turbine-powered MTT 420-RR

Explanation: the turbine motorcycle is one of the many fastest motorcycles in the world. with top speed hitting 273 mph (439 km/h)

What does it take to launch a rocket in space?

Answers

To get rockets into orbit, they need much more thrust than the amount that will get them up to the required altitude. They also need sufficient thrust to allow them to travel with very high orbital speed. ... If speed is less than this, an object will fall back to the Earth
You need more than enough fuel engine to blast you up in to space for if anything goes wrong you have enough

i will give brainlist


the process by which engineers and designers quickly make a version of a product to assess a specific design called?

Answers

Answer:

Rapid prototyping

Rapid prototyping is the process by which engineers and designers quickly make a version of a product to assess a specific design element.

can you please help me out with these questions! PLEASE DONT COMMENT ANYTHING IF U DONT HAVE THE ANSWERS!!!

can you please help me out with these questions! PLEASE DONT COMMENT ANYTHING IF U DONT HAVE THE ANSWERS!!!
can you please help me out with these questions! PLEASE DONT COMMENT ANYTHING IF U DONT HAVE THE ANSWERS!!!
can you please help me out with these questions! PLEASE DONT COMMENT ANYTHING IF U DONT HAVE THE ANSWERS!!!

Answers

Answer:

what questions?

Explanation:

I Zamboanga sorry for I can not assist you with this assignment

Describe 3 factors an engineer should take into consideration when choosing material for building the pipes in a pipeline

Gr. 8
Think it has something to do with Viscosity, Density, and Pressure but not sure what

Answers

Answer:

Durability: The material used for building pipes in a pipeline should be able to withstand the conditions it will be exposed to, such as pressure, temperature changes, and corrosion.Flow properties: The viscosity and density of the liquid or gas that will be flowing through the pipeline should be taken into consideration when choosing the material for the pipes. Materials with lower viscosity and density will be more suitable for transporting fluids with high flow rates.Cost: The cost of the material used for building pipes in a pipeline is an important consideration. Engineers need to choose a material that is both durable and cost-effective, while still being able to meet the flow and pressure requirements.

Answer:

design, material, cost

Explanation:

Summarize how a glider is moved up in the air by natural convection.

Answers

Convection allows warmer air to rise because it is less dense than colder air. A thermal lift is a column of warm rising air. If the air rises quicker than the glider they will be pushed up.

Answer:

the air at ground level rises to form convection currents (currents of rising air), which, when impacting a glider's wings, generates lift, which allows them to remain in the air, or even rise to higher altitudes.

Explanation:

Do you think we can walk on the sun one day?

I don't know maybe some weird scientists from Ohio create sun-proof suits and we can go during the night and at winter.

Answers

Answer: Yes

Explanation:

I KNOW ITS FOOLISH BUT YES. THE HUMAN RACE MADE A HAND HELD DEVICE THAT CARRIES ALMOST ALL THE INFOMATION IN THE WORLD. CALLED "The Cell Phone" AND WE JUST CHILLIN. With It OVER 50% OF THE WORLD HAS ONE. So Yes.

I'm sorry to say that it is currently impossible for humans to walk on the sun or even get close to it. The sun is an extremely hot and volatile star, with surface temperatures reaching up to 5,500 degrees Celsius (9,932 degrees Fahrenheit) and core temperatures of over 15 million degrees Celsius (27 million degrees Fahrenheit). The heat and radiation emitted by the sun would be lethal to any form of life as we know it.

Even with sun-proof suits, there is currently no material that can withstand the extreme heat and radiation of the sun for more than a few seconds. Additionally, the distance between the Earth and the sun is so vast that it would take years for any spacecraft to travel there, and the journey would be extremely dangerous due to the intense gravitational forces and radiation.

Therefore, while it's always possible that new technologies and scientific breakthroughs could change our understanding of what's possible, as of now, it is highly unlikely that humans could ever walk on the sun.

PLS HELP!!!
Choose the best definition of synthesizing information.

A.You must find information from many sources and cite each source separately.


B.You must copy the most important quote from a source to restate relevant facts.


C.You must use the most important information from several sources to create something new

Answers

Answer: C

Synthesizing is basically mixed or together, sometimes creating something new

The best definition of synthesizing information is "You must use the most important information from several sources to create something new". Thus, option C is correct.

What are the protein digestion's intermediary byproducts?

Amino acids can be used as a source of energy generation thru the Krebs cycle since digesting them yields metabolic intermediates such pyruvate, acetate CoA, acetoacyl CoA, decarboxylation, or -ketoglutarate.

Acetyl-CoA is a crucial intermediate involved in numerous metabolic pathways, such as cellular respiration, the metabolism of fatty acids, steroids, and amino acids, the synthesis of ketone bodies, and the production of neurotransmitters. It has also been suggested that acetyl-CoA may have an impact on the AMPK signalling pathway.

Therefore, The best definition of synthesizing information is "You must use the most important information from several sources to create something new". Thus, option C is correct.

Learn more about amino acids on:

https://brainly.com/question/14583479

#SPJ2

Which of the following best describes solids, liquids, and gases? the speed at which fluids flow the measurement of elasticity in fluids the normal phases in which matter exists the ability of a fluid to flow through anything

Answers

Answer:

water flows and gas lingers in the air while solids are stabilized

Explanation:

Answer: water flows and gas lingers in the air while solids are stabilized

What structure notorious for its 3.97 degree tilt is the freestanding bell tower of a cathedral in its namesake Italian town? The structure's tilt comes from the soft ground of its unstable foundation.

Answers

The structure notorious for its 3.97-degree tilt is the Leaning Tower of Pisa. It is the freestanding bell tower of the Cathedral of Pisa, located in the Italian town of Pisa. The tower's tilt is a result of the soft ground and unstable foundation on which it was built.

The leaning tower of Pisa

A student is measuring the effects of an electric circuit on a compass, and he is testing to see if increasing the current will cause the compass needle to change its direction faster. He does one trial using a 9-volt battery and another trial using a 1.5-volt battery. He takes accurate data. Based on good experimental design, what would improve his experiment?


A) He should repeat the test with three additional batteries of varying voltages to demonstrate the reproducibility of results.

B) He should use only one battery but do several trials, using different circuit designs to ensure he has appropriate test groups.

C) He should add a nonworking compass to act as a control.

D) He should use batteries of the same voltage but from different manufacturers to show he has used different variables.

Answers

Hello!
The answer is A.
Hopefully I helped :)
Please mark me brainilest if you get the chance
the answer is a!! :)

TWO SENTENCES!!! What is something that you have used today that was designed by an engineer? What parts were designed by an engineer?

Answers

Cars, houses, Devices. :)

Answer:

Something that I used made from an engineer is my computer. The part that was designed is the battery, or the chip that holds the computer's data or storage, along with that a have a piece plugged into my computer to connect my mouse. Here ya go!!!   ⊂≈ΛωΛ≈⊃

WILL GIVE FREE BRAINLIEST EVERYDAY! DO NOT look up answers!!
Question: What is the required equipment used in welding(ANY KIND!!)

Answers

Answer:

> Required equipment for welding is as follows;

• Welding face mask

• Welding suit

• Angle Grinders

• Hammer/Mallet

• Pliers

Explanation:

> The following are explanations as to why these tools are used and descriptions on what they are used for.


> Welding mask:

• Used to protect the face from sparks/flames.

• Not wearing one is a serious safety hazard.


> Welding suit:

• This is not always required, but bumps up the safety by a significant margin.

• In buisnesses, this is usually a requirement, but not always.

• They can be similar to firefighting suits, but a different design in terms of looks.


> Angle grinder:

• This is used to smooth edges, and is an extremely useful tool to get a polished look on finished pieces.

• They work like sanders; grinding down the surface where pressure is applied. In welding, it is used upon metal. Mass amounts of sparks are produced by it when applied, and the face mask/suit would then come in handy.


> Hammer/Mallet:

• This is used to shape heated stone. You may have seen a form of media wirh a character making a sword of sorts with heated metal and a hammer. This is (to a certain extent) accurate.

• A hammer and mallet would work similarly, and usually achieve the same goal.


> Pliers:

• This is used to hold heated metal. Even with welding gloves, it’s often too much for them, in which case they are held with pliers.


> I hope this helped you with your question, and solved any other quieres you may have had on the subject. #LearningWithBrainly

Answer:
1. Power Source
2. Electrode holder and cables
3. Welder protection
4. Fume protection


You are driving in an area where rain has pooled on the road, and you have driven through water that was several inches deep. You should

Answers

Answer:

You should stop.

Explanation:

Turn around and don`t drown! It only takes about a few inches to push you off the road! I have seen this happen... use common since!  

You should most definitely turn around if possible if that doesn’t work get out of the car immediately

Who likes UnderTale?? if not then DON'T ANSWER!!
Also in hot land with the art class easter egg! who found that boss?

Answers

i like undertale it’s pretty cool if you ask me. i don’t know who found the boss tho sorry hajdnxjsnd
Low key it’s pretty good can I get Brainlyist I never got it before

describe a brainstorming session

Answers

All the ideas are noted down without criticism and after the brainstorming session the ideas are evaluated.

Brainstorming is a group creativity technique by which efforts are made to find a conclusion for a specific problem by gathering a list of ideas spontaneously contributed by its members. ... All the ideas are noted down without criticism and after the brainstorming session the ideas are evaluated.

QUESTION: I made a game!!! Tell me if it is good
https://scratch.mit.edu/projects/510955319/ (Copy and paste)

Answers

Answer:

Nice game.

Explanation:

nice job, be careful sharing links in here though :)
Other Questions
5) Which of the following statements concerning external sources of financing for nonfinancial businesses in the United States are true? A) Stocks are a far more important source of finance than are bonds.B) Stocks and bonds, combined, supply less than one-half of the external funds. C) Financial intermediaries are the least important source of external funds for businesses. D) Since 1970, more than half of the new issues of stock have been sold to American households. 177) Which word does not belong with the other two?A) catB) nearC) sun what is the pressure in a 9.00 l tank with 36.2 grams of fluorine gas at 355 k? Find the general solution of given differential equations 2. y +8 +12 X 4. y' +64y=0. What was the effect of business practices such as consolidation, creating trusts, and forming pools? select one: a. they increased public support for the company that appeared to be most successful. b. they made it possible to be eligible for government support such as land grants and subsidies. c. they reduced the significance of competitors so a company had more control over pricing and product. d. they were required forms of management in order to sell shares of stock and raise funding for expansion. Plsss help me, ASAP, Thank you Consider two interrelated product markets 1 and 2 with the following inverse demand functions.p1=54-2q1+q2p2=54-2q2+q1Assume that there is no production cost.Using the inverse demand functions derive the demand functions.Suppose the firms simultaneously compete in prices. Use the inverse demand functions that you have derived in part (ii) to determine the best response functions. Are the prices strategic substitutes or complements? Explain your answer.Determine the Bertrand equilibrium outcomes consisting of the equilibrium outputs, prices and profits of each firm. A garden store bought a fountain at a cost of $995.66 and marked it up 100%. Later on, the store marked it down 25%. What was the discount price? What change made Byzantium more powerful?Defensive walls were built around the city.The region began to recover from civil wars.The emperor seized more power from the military.Constantine seized Christian churches and their wealth. Find the required annual interest rate, to thenearest tenth of a percent, for $1100 to grow to$1400 if interest is compounded monthly for 7years. Expect more questions from me today cuz Im a dummy who dont get math at all anyway mind answering this its 40 points The four moons are now called the _________________ in his honor Which expression is not equivalent to 36x48? 12(3x4) 9(4x6) (6x8)6 (12x16)3 Read the poem "Hope is the thing with feathers - by Emily Dickinson."Hope is the thing with feathers -That perches in the soul -And sings the tune without the words -And never stops - at all -And sweetest - in the Gale - is heard -And sore must be the storm -That could abash the little BirdThat kept so many warm -Ive heard it in the chillest land -And on the strangest Sea -Yet - never - in Extremity,It asked a crumb - of me.The line "And sore must be the storm" is an example of which type of figurative language?( A ) enjambment( B ) metaphor( C ) ambiguity( D ) personification A Japanese user of Sony's ERP system can view the company's financial information in Japanese yen, while a British user of the system is able to see the same information in British pounds. This ERP system is _____. whats the x-intercept of y=-1.4x-1 Read the passage from "The Raven and the First MenThe Beginnings of the Haida."The men were hungry and thirsty, but there was nofood on the large sandy beach, and the salt water justmade them thirstier. Determined to take care of themen he had found, Raven flew to find them provisions.When he returned, he gave them almost everythingthey would ever need.Still, Raven could tell the men were not truly happy.They did not have companions to join them in caringfor the earth. So Raven, wise and determined,searched the earth and sea until he found a group ofwomen trapped inside a chiton. He brought them tothe men. The two groups of humans fit well together,and Raven became very protective of his people. the spiral organ contains two groups of hair cells, inner and outer. what is the function of the two groups? Help me plz!!! I give brainliest How do I get the answer