The power factor is equal to 1, the microwave oven has a unity power factor. A capacitor with a value of approximately 72.74 microfarads (μF) should be placed in parallel with the source to improve the power factor to 0.9 leading.
(i) The power factor of the microwave oven can be calculated by dividing the real power (P) by the apparent power (S). The real power is the product of the supply voltage (V), supply current (I), and power factor (PF). The apparent power is the product of the supply voltage and current.
P = V * I * PF
Apparent power (S) = V * I
Dividing the two equations, we get:
PF = P / S
Given that the supply voltage is 120 V and the supply current is 14.7 A, we can calculate the real power:
P = V * I * PF = 120 V * 14.7 A = 1764 W
The apparent power is:
S = V * I = 120 V * 14.7 A = 1764 VA
Therefore, the power factor (PF) is:
PF = P / S = 1764 W / 1764 VA = 1
Since the power factor is equal to 1, the microwave oven has a unity power factor, indicating a purely resistive load.
(ii) For an inductive load, the reactive power (Q) can be calculated using the following formula:
Q = sqrt(S^2 - P^2)
Plugging in the values, we have:
Q = sqrt((1764 VA)^2 - (1764 W)^2) ≈ 776.88 VAR
The power triangle shows the relationship between real power (P), reactive power (Q), and apparent power (S). P is the horizontal component, Q is the vertical component, and S is the hypotenuse of the triangle. The power factor (PF) can be represented as the cosine of the angle between P and S. In this case, since the power factor is 1, the angle between P and S is 0 degrees, indicating a purely resistive load.
(iii) To improve the power factor to 0.9 leading, a capacitor needs to be placed in parallel with the source. Since the power factor is currently 1 (indicating a purely resistive load), we need to introduce a reactive component (capacitive) to offset the inductive component and shift the power factor toward leading.
The value of the capacitor can be calculated using the formula:
C = (Q * tan(cos(PF_desired))) / (2 * π * f * V^2)
Where Q is the reactive power (776.88 VAR), PF_desired is the desired power factor (0.9 leading), f is the frequency (60 Hz), and V is the supply voltage (120 V).
Substituting the values, we have:
C = (776.88 VAR * tan(cos(0.9))) / (2 * π * 60 Hz * (120 V)^2) ≈ 72.74 μF\
Therefore, a capacitor with a value of approximately 72.74 microfarads (μF) should be placed in parallel with the source to improve the power factor to 0.9 leading.
Learn more about power factor here :
https://brainly.com/question/11957513
#SPJ11
Which option demonstrates when most vehicles lose their efficiency?
as they refuel
during starts and stops
during the testing phase
as they brake
Hey there ..
I think the answer is as they put brake ..
I am not sure .. just check the image also provided above .. ..
If u think this helped u ..plz mark me as brainliest ..
And follow me
Answer:
During starts and stops
Explanation:
"Many of the energy inefficiencies in vehicles occur during starts and stops."
found it in the text.
1. For ball bearings, determine: (a) The factor by which the catalog rating (C10) must be increased, if the life of a bearing under a constant load is to double. Use equation 11-1 as your starting point. (b) Given the Weibull parameters of example 11-3, the factor by which the catalog rating must be increased if the reliability is to be increased from 0.9 to 0.99.
Answer:
(b) Given the Weibull parameters of example 11-3, the factor by which the catalog rating must be increased if the reliability is to be increased from 0.9 to 0.99.
Equation 11-1: F*L^(1/3) = Constant
Weibull parameters of example 11-3: xo = 0.02 (theta-xo) = 4.439 b = 1.483
Explanation:
(a)The Catalog rating(C)
Bearing life:\(L_1 = L , L_2 = 2L\)
Catalog rating: \(C_1 = C , C_2 = ? ,\)
From given equation bearing life equation,
\(F\times\frac{1}{3} (L_1) = C_1 ...(1) \\\\ F\times\frac{1}{3} (L_2) =C_2...(2)\)
we Dividing eqn (2) with (1)
\(\frac{C_2}{C_1} =\frac{1}{3} (\frac{L_2}{L_1})\\\\ C_2 = C*(\frac{2L}{L})\frac{1}{3} \\\\ C_2 = 1.26 C\)
The Catalog rating increased by factor of 1.26
(b) Reliability Increase from 0.9 to 0.99
\(R_1 = 0.9 , R_2 = 0.99\)
Now calculating life adjustment factor for both value of reliability from Weibull parametres
\(a_1 = x_o + (\theta - x_o){ ln(\frac{1}{R_1} ) }^{\frac{1}{b}}\)
\(= 0.02 + 4.439{ ln(\frac{1}{0.9} ) }^{\frac{1}{1.483}} \\\\ = 0.02 + 4.439( 0.1044 )^{0.67}\\\\a_1 = 0.9968\)
Similarly
\(a_2 = x_o + (\theta - x_o){ ln(\frac{1}{R_2} ) }^{\frac{1}{b} }\\\\ = 0.02 + 4.439{ ln(1/0.99) }^{\frac{1}{1.483} }\\\\ = 0.02 + 4.439( 0.0099 )^{0.67}\\\\a_2 = 0.2215\)
Now calculating bearing life for each value
\(L_1 = a_1 * LL_1 = 0.9968LL_2 = a_2 * LL_2 = 0.2215L\)
Now using given ball bearing life equation and dividing each other similar to previous problem
\(\frac{C_2}{C_1} = (\frac{L_2}{L_1} )^{\frac{1}{3} }\\\\ C_2 = C* (\frac{0.2215L }{0.9968L} )^{1/3}\\\\ C_2 = 0.61 C\)
Catalog rating increased by factor of 0.61
CODE
PUZZLE 92
B
C
M
H
K
1
M
Fiil the square with numbers with albhabets
Answer:
Explanation:
I'm not 100% this is what you want, but here it is:
2
3
13
8
11
A
13
Find the first five terms of the sequence defined by an=6an-1
Answer:
The first five terms of the given geometric sequence are
8,40,200,1000,5000
Explanation:
:)
6. the color code of a resistor (from band 1 through band 4) is brown-black-orange-gold. what is the approximate value of the resistor? group of answer choices 100 kohm 100 ohms 10 kohms 1 kohm
The color code of a resistor (from band 1 through band 4) is brown-black-orange-gold. The approximate value of the resistor is 10 kohms (10,000 ohms). Therefore the correct option is option C.
The first band denotes the first digit of the resistance value, the second band is the second digit of the resistance value, the third band is the number of zeros in the resistance value, and the fourth band is the tolerance value.
The formula for calculating the resistance value of a resistor is given as, R = AB × 10^C± D Where, A = First digit of the resistance value B = Second digit of the resistance value C = Number of zeros in the resistance value D = Tolerance value
If we use the given color code of the resistor (brown-black-orange-gold), we get the following values: A = 1B = 0C = 1 (number of zeros = 3)D = ± 5%Now, applying the formula of resistance, we get,
R = AB × 10^C= 10 × 10^3= 10,000 ohms or 10 kohms (since 1 kohm = 1000 ohms) Therefore, the approximate value of the resistor is 10 kohms (10,000 ohms). Therefore the correct option is option C.
For such more question on resistor:
https://brainly.com/question/29720070
#SPJ11
when leak testing a low-pressure chiller, the maximum pressure to use is;
When leak testing a low-pressure chiller, the maximum pressure to use is typically around 5 psi.
It is important to use a low-pressure method to prevent damage to the system and ensure accurate results. Higher pressures can cause components to fail or rupture, leading to safety hazards and costly repairs. Therefore, it is recommended to follow the manufacturer's guidelines and use appropriate equipment and techniques for leak testing.
When leak testing a low-pressure chiller, the maximum pressure to use is typically the chiller's design working pressure, which can be found in the manufacturer's specifications or on the chiller's nameplate. It's essential to stay within this pressure limit to prevent damage to the chiller and ensure safety during the testing process. Always refer to the manufacturer's guidelines when conducting a leak test on a low-pressure chiller.
Learn more about pressure here,
https://brainly.com/question/29213804
#SPJ11
What is the 2s complement of the BINARY number 111110100.101 ?
a. 000001011.011
b. 110011011.111
c. 001001101.001
d. 000100010.010
e. None of the choices
Answer:
999999999999999999999
Which Finance jobs can someone pursue with only a high school diploma? Check all that apply.
PLS HURRY IM TIMED
Tax Preparer
Treasurer
Actuary
Teller
Loan Officer
Quantitative Analyst
Bank tellers, bookkeepers, tax examiners, auditing clerks, cashiers, and bill collectors are among the occupations that demand a high school graduation or prior job experience. Thus option A,D is correct.
What Finance jobs pursue with only a high school diploma?Depending on your field of study, degree type, and experience, you can obtain a number of entry-level positions with a finance degree. Some entry-level options include junior tax accountant, stockbroker, financial analyst, personal finance advisor, and banking assistant.
For entry-level positions in many financial careers, a bachelor's degree is necessary, and for management-level positions, a master's degree.
Therefore, Tax Preparer and Teller are included in Finance jobs can someone pursue with only a high school diploma.
Learn more about Finance jobs here:
https://brainly.com/question/19342809
#SPJ2
A steel wire is suspended vertically from its upper end. The wire is 400 ft long and has a diameter of 3/16 in. The unit weight of steel is 490 pcf. Compute:
a. the maximum tensile stress due to the weight of the wire
b. the maximum load P that could be supported at the lower end of the wire. Allowable tensile stress is 24,000 psi.
Answer:
a) the maximum tensile stress due to the weight of the wire is 1361.23 psi
b) the maximum load P that could be supported at the lower end of the wire is 624.83 lb
Explanation:
Given the data in the question;
Length of wire L = 400 ft = ( 400 × 12 )in = 4800 in
Diameter d = 3/16 in
Unit weight w = 490 pcf
First we determine the area of the wire;
A = π/4 × d²
we substitute
A = π/4 × (3/16)²
A = 0.0276 in²
Next we get the Volume
V = Area × Length of wire
we substitute
V = 0.0276 × 4800
V = 132.48 in³
Weight of the steel wire will be;
W = Unit weight × Volume
we substitute
W = 490 × ( 132.48 / 12³ )
W = 490 × 0.076666
W = 37.57 lb
a) the maximum tensile stress due to the weight of the wire;
σ\(_w\) = W / A
we substitute
σ\(_w\) = 37.57 / 0.0276
= 1361.23 psi
Therefore, the maximum tensile stress due to the weight of the wire is 1361.23 psi
b) the maximum load P that could be supported at the lower end of the wire. Allowable tensile stress is 24,000 psi
Maximum load P that the wire can safely support its lower end will be;
P = ( σ\(_{all\) - σ\(_w\) )A
we substitute
P = ( 24000 - 1361.23 )0.0276
P = 22638.77 × 0.0276
P = 624.83 lb
Therefore, the maximum load P that could be supported at the lower end of the wire is 624.83 lb
An aluminum cylinder is 5cm long and has a mass of 42g. If aluminum has a density of 2700*9/m 3, how long is the cylinder?
The radius of the cylinder is the length that measures from the center to the parameter. The length of the cylinder is 1 cm.
What is Density?The density of the given substance can be used as the measure of the mass and the volume of the substance.
Given,
Length of the aluminum cylinder = 5cm
Mass = 42 g
Density of aluminum = 2700 kg/ m³ = 2.7 gm/cm³
From the density the volume is calculated as:
Density = mass ÷ volume
2.7 = 42 ÷ V
V = 42 ÷ 2.7
= 15.56
The radius of the cylinder is calculated as:
(r) = √(V / π × h)
Here, V = 15.56, π = 3.14, h = 5 cm
Substituting values:
r = √(15.56 ÷ 3.14 × 5)
= √ (15.56 ÷ 15.7)
= 0.99
= 1
Therefore, 1 cm is the length.
Learn more about radius here:
https://brainly.com/question/1693937
#SPJ1
The UHRS platform is optimized for Edge/Internet Explorer only. You can still use your favorite browser, but keep in mind that you may experience technical issues when working on UHRS with a different browser than Edge or Internet Explorer.
UHRS is optimized for...
It is to be noted that all UHRS platforms are optimized for the popular kinds of internet browser applications.
What is a UHRS?The Universal Human Relevance System (UHRS) is a crowdsourcing platform that allows for data labeling for a variety of AI application situations.
Vendor partners link people referred to as "judges" to offer data labeling at scale for us. All UHRS judges are bound by an NDA, ensuring that data is kept protected.
A browser is a software tool that allows you to see and interact with all of the knowledgeon the World Wide Web. Web sites, movies, and photos are all examples of this.
Learn more about internet browser applications.:
https://brainly.com/question/16829947
#SPJ1
Tech A says that bearing axial loads are in line with the shaft. Tech B says that bearing radial loads occur because the gears have a tendency to push each other apart as torque is transmitted between them. Who is correct
Tech A is correct. Bearing axial loads are in line with the shaft and occur parallel to the axis of rotation.
Bearing radial loads, on the other hand, occur perpendicular to the axis of rotation and are caused by the weight of the rotating assembly or external forces acting on it. Gear mesh forces may cause additional radial loads on bearings, but they are not the primary cause of radial loads.
Tech A is correct when stating that bearing axial loads are in line with the shaft, and Tech B is correct when saying that bearing radial loads occur because the gears have a tendency to push each other apart as torque is transmitted between them. Therefore, both Tech A and Tech B are correct in their respective statements.
Learn more about Bearing radial loads
brainly.com/question/31429672
#SPJ11
Draw a radial power circuit arrangement containing 3 single fused sockets and 2 double unfused sockets showing the live, earth and neutral wiring
Answer:
Attached below is the Radial power circuit arrangement
Explanation:
Radial power circuit arrangement is done in a way that a single cable starts from the fuse box and connects to all the outlet socket contained in the circuit also the cable contains wires ( live , neutral and earth )
The advantage of a radial power circuit arrangement is that it enables easy identification of electrical faults on the circuit.
In addition to rotating drums, clutch packs may be installed ____.
All of the above.
behind the front pump
on the center support
at the rear of the case
Clutch packs may be installed in multiple locations, including behind the front pump, on the center support, and at the rear of the case. Therefore, the statement "All of the above" is correct.
In an automatic transmission, clutch packs are used to engage and disengage various gear sets to control the power flow and enable smooth gear shifts. These clutch packs can be located in different areas of the transmission. They can be installed behind the front pump, which is responsible for circulating fluid through the transmission. Additionally, clutch packs can be found on the center support, which provides structural support for the transmission components.
Finally, clutch packs can be placed at the rear of the transmission case, where the power is transferred to the driveshaft or output shaft. Therefore, all of the mentioned locations are possible locations for installing clutch packs in an automatic transmission.
To learn more about automatic transmission click here, brainly.com/question/14093047
#SPJ11
R-744 refrigerant is bad why
Answer:
Explanation:
R-744 is seen as the 'perfect' natural refrigerant as it is climate neutral and there is not a flammability or toxicity risk. It is rated as an A1 from ASHRAE. While it is non-toxic there is still risk if a leak occurs in an enclosed area as R-744 will displace the oxygen in the room and could cause asphyxiation
The shape of the wood beam is a rectangle. In a paragraph explain the tradeoffs an engineer would make in selecting a wood with a rectangle shape versus manufactured beams with other stronger but lighter weight shapes.
Answer:
Wood is heavy
Explanation:
What is the reading of this 1-2” micrometer? Enter your answer in the box below out to ten thousandths of an inch
Answer:
gee
Explanation:
ole\(\int\limits^a_b {x} \, dx dsf\)
who is the strongest avenger i say hulk but who knows at this point
Answer:
or is the strongest evenger she hulk
Explanation:
?????????
Answer:
Thor!
Explanation:
In Thor: Ragnarok he beat the Hulk in order for Hulk to win thor had to be electrocuted and in Avengers: Endgame Thor is seen holding open the "Floodgates" and withstanding the radiation from a dying star, also the fact that Thor is a god means that he is all powerful and the rightful heir to the throne to Asgard, plus the fact that he has defeated Loki multiple times a feat that not even the Hulk has done.
A motor car reaches a velocity of 17 m/s from rest. Draw a velocity-time graph and determine the acceleration.
The automobile initially accelerates for 5 seconds. As a result, the velocity-time graph initially slopes and then maintains a constant speed.
What is velocity of time ?Your understanding of velocity and its scientific definition are probably similar. You are aware that a big displacement over a short period of time corresponds to a large velocity, and that velocity is measured in terms of the speed of objects in terms of miles an hour or kilometres per hour. The shift in position multiplied by the distance travelled is how average velocity is calculated. Velocity and speed describe how quickly or slowly a moving object moves. We frequently encounter circumstances when we must determine which of two or more moving objects is going faster. If the two are travelling on the same route in the same direction, it is simple to determine which is quicker.
To know more about velocity of time visit:
https://brainly.com/question/18358954
#SPJ1
A biometric authentication system was tested with 100 genuine fingerprints and 100 imposter fingerprints. The histogram shows the number of samples in each 0.25-range bin. That is: 60 of the 100 imposter samples returned a value between 0 and 0.25, 30 of the imposter samples returned a value between 0.25 and 0.5, and the remaining 10 of the 100 imposter samples returned values between 0.5 and 0.75. Similarly, 30 of the 100 genuine attempts returned a value between 0.5 and 0.75, and 70 of the 100 genuine attempts returned a value between 0.75 and 1. imposter genuine 70 60 30 30 10 • Is it possible to set the acceptance/rejection threshold such that no genuine attempts are rejected and no imposter attempts are accepted? (yes/no) • What is the maximum threshold such that no genuine attempts are rejected? What percentage of imposter attempts will be accepted for the above threshold? • What is the minimum threshold such that no imposter attempts are accepted? • What percentage of genuine attempts will be rejected for the above threshold? • What percentage of imposter attempts will be accepted if the threshold is set to 0.5? • What percentage of genuine attempts will be rejected if the threshold is set to 0.5?
To answer your questions: 1. No, it is not possible to set the acceptance/rejection threshold such that no genuine attempts are rejected and no imposter attempts are accepted. There will always be some level of error or false positives/negatives in any biometric authentication system.
2. The maximum threshold such that no genuine attempts are rejected would be 0.75. At this threshold, all 100 genuine attempts would be accepted. However, 30 out of the 100 imposter attempts would also be accepted, which is 30% of the imposter attempts.
3. The minimum threshold such that no imposter attempts are accepted would be 0.5. At this threshold, all 100 imposter attempts would be rejected. However, 30 out of the 100 genuine attempts would also be rejected, which is 30% of the genuine attempts.
4. If the threshold is set to the minimum threshold of 0.5, 30% of the genuine attempts will be rejected.
5. If the threshold is set to 0.5, 40% of the imposter attempts will be accepted.
It's important to note that setting the threshold at a certain level involves a trade-off between security and convenience. A higher threshold may increase security by reducing the number of false positives, but it may also increase inconvenience by rejecting more genuine attempts. On the other hand, a lower threshold may increase convenience by accepting more genuine attempts, but it may also increase the number of false positives and reduce security.
Learn more about imposter here:
https://brainly.com/question/24866258
#SPJ11
1.What is three phase? why it is needed?
2. What is the condition to be balanced? Write down voltage equation of a balanced 3 phase voltage source and draw their phasor diagram.
1. We can see here that three phase refers to a type of electrical power transmission that uses three alternating current (AC) waveforms that are 120 degrees out of phase with each other. This is different from single-phase power transmission, which uses only one AC waveform.
What is voltage?Voltage, also known as electric potential difference, is a measure of the electrical potential energy per unit of charge in an electrical circuit. It is defined as the amount of work required to move a unit of electric charge between two points in a circuit, typically measured in volts (V).
Three-phase power is needed because it allows for more power to be transmitted over a given amount of wire or cable. With three-phase power, the power is delivered in a more consistent manner, which means that there is less voltage drop over long distances.
2. In order for a three-phase system to be balanced, the three phases must have the same amplitude and be 120 degrees out of phase with each other. The voltage equation of a balanced three-phase voltage source is given by:
Vph = Vline / √3
where Vph is the phase voltage and Vline is the line voltage. The phasor diagram for a balanced three-phase system shows three sinusoidal waveforms that are displaced by 120 degrees from each other.
Learn more about voltage on https://brainly.com/question/27861305
#SPJ1
Considering how likely the risk is to affect the company’s profits is part of which component of risk management?
Risk identification
Risk assessment
Risk control
Risk mitigation
Why is it important that the orifices and the passages of the cutting tip be free of dirt, scratches,
and burrs?
Answer: It is very important that the orifices and passages be kept clean and free of burrs to permit free gas flow and to form a well-shaped flame.
Explanation:
are trains cool because if they are then my dad didn't beat me
Answer:
I think trains are pretty awesome. There's a train in japan that levitates slightly and runs on magnetism. Pretty amazing. It's super fast too
On 2023 z with a manual transmission. When the clutch is engaged, what is the first step to shift into reverse?
The first step that is needed in order to shift the reverse would be to Push down on the shift lever.
What is meant by a manual transmission?This is the term that is used in driving to explain the scenario that occurs due to the fact that a person has to go through a system of changing gears while they are driving. An example of how this is used is when a person says that there car has a manual transmission instead of automatic transmission.
This would mean that this person would be the one that would be changing the gears while driving on their own. To do this what would be done is to Push down on the shift lever.
Read more on driving here: https://brainly.com/question/1557131
#SPJ1
Which of the following is false about most machine learning models?
They require numbers or collections of numbers as input.
They are flexible enough to handle all issues you might see in your dataset (lack of data, incorrect data, etc)
They are trained by iteratively adjusting their parameters to minimize a loss function.
Once trained, their model parameters can be used to make new predictions in a process called a “model inference algorithm.”
The false statement about most machine learning models is that: B. they are flexible enough to handle all issues you might see in your dataset (lack of data, incorrect data, etc).
What is machine learning?Machine learning (ML) is also referred to as deep learning or artificial intelligence (AI) and it can be defined as a subfield in computer science which is typically focused on the use of data-driven techniques (methods), computer algorithms, and technologies to develop a smart computer-controlled robot with an ability to automatically perform and manage tasks that are exclusively meant for humans or solved by using human intelligence.
Generally speaking, machine learning models are designed and developed to accept numerical data (numbers) or collections of numerical data (numbers) as an input.
Read more on machine learning here: brainly.com/question/25523571
#SPJ1
Hotel Fire Safety Directors shall do all EXCEPT:
A. train and supervise Fire Brigade
B. conduct fire drills
C. order full building evacuation of guests
D. distribute applicable parts of the Fire Safety Plan to all employees
Hotel Fire Safety Directors are not authorized to order a full building evacuation of guests. Therefore, option (C) is correct.
Who are Hotel Fire Safety Directors?Hotel Fire Safety Directors are individuals who are responsible for ensuring the safety of guests and employees in the event of a fire emergency in a hotel or other hospitality establishment.
They are typically appointed by the hotel management and must have knowledge of fire safety regulations and protocols, as well as the ability to lead and manage a team during an emergency.
Hotel Fire Safety Directors are responsible for implementing and maintaining the Fire Safety Plan, which includes conducting fire drills, training and supervising the Fire Brigade, and distributing applicable parts of the Fire Safety Plan to all employees. They must also work closely with the local fire department to ensure compliance with local fire safety regulations and protocols.
Learn more about Hotel Fire Safety, here:
https://brainly.com/question/4245370
#SPJ4
The elementary inverse reaction A+B→C+D takes place in the liquid phase and at constant temperature as follows: Equal volumetric flows of two streams, the first containing 0.020 moles A/litre and the second containing 1.4moles B/litre, constitute the feed to a 30-litre volume of a full-mixing continuous-work reactor. The outlet of the reactor is the inlet to a subsequent piston flow reactor (in series reactors). In the outlet stream from the first reactor the concentration of product C was measured and found to be equal to 0,002 mol/l.
-What should be the volume of the piston flow reactor so that the array achieves a conversion efficiency of 35%?
To determine the required volume of the piston flow reactor for a conversion efficiency of 35%, we need to use the following equation:
How To determine the required volume of the piston flow reactorX = (C0 - C)/C0 = 1 - exp(-kV)
where:
X = conversion efficiency
C0 = initial concentration of reactant A
C = concentration of reactant A at any given time
k = rate constant of the reaction
V = reactor volume
We can rearrange this equation to solve for V:
V = ln(1/(1-X)) / k
We are given that the feed to the reactor contains 0.020 moles of A per liter and 1.4 moles of B per liter. Since the reaction is elementary and the stoichiometry is 1:1 for A and B, we can assume that the concentration of B will remain constant throughout the reactor. Therefore, the initial concentration of A in the feed is 0.020 mol/L.
We are also given that the concentration of product C in the outlet stream from the first reactor is 0.002 mol/L. Since the stoichiometry is 1:1 for A and C, we can assume that the concentration of A at this point is also 0.002 mol/L.
To determine the rate constant k, we need to use the following equation:
k = (k_f * k_r) / (k_f + k_r)
where:
k_f = forward rate constant
k_r = reverse rate constant
Read more on piston flow reactor herehttps://brainly.com/question/30396700
#SPJ1
If a digital multimeter displays 000 when reading amperage, what should the technician do to get a more accurate reading
Answer:
Use a non digital multimeter.
Explanation:
If a digital multimeter displays "000" when reading amperage, the technician should adjust the multimeter to a higher amperage range.
Why should the technician do this?This is because "000" typically indicates that the current being measured is too low for the current range selected on the multimeter.
By switching to a higher amperage range, the technician can get a more accurate reading and ensure that the multimeter is properly measuring the current in the circuit under test.
Learn more about digital multimeter at:
https://brainly.com/question/29512413
#SPJ3
Before using a vise to mount work, you should do all of the following except
Before using a vise to mount work, wipe the vise base and worktable clean, inspect it for burrs and nicks, and bolt it firmly to the table.
What is meant by vise?A vise or vice is a mechanical tool used to hold an object in place so that work can be done on it. The two parallel jaws of a vise are threaded in and out by a screw and a lever, with one jaw being fixed and the other movable. A set of locking pliers with a lever action is what is meant by the term "vise grip." A vise, also spelled vice, is a holding mechanism with two parallel jaws; one jaw is fixed and the other is moveable via a screw, lever, or cam. The vise may be permanently affixed to a bench when used to hold a workpiece during manual processes like filing, hammering, or sawing.The complete question is,
When a vise is used to mount work, ____.
wipe the vise base and worktable clean, inspect it for burrs and nicks, and bolt it firmly to the table
To learn more about vise refer to:
https://brainly.com/question/19863370
#SPJ1