A flow of 12 cusecs enters 600 acres reservoir. Determine the time in hours required to raise water level by 6 inches?

To build the given assembly in Solidworks, follow these steps:

Step 1: Create a new assembly in Solidworks.

Step 2: In the assembly, select the Front plane and create a new sketch.

Step 3: Draw the first bracket by selecting the Rectangle tool from the Sketch tab and then selecting the Smart Dimension tool to add dimensions to the sketch.

The first bracket will be 100mm x 50mm, with holes of 5mm diameter located 10mm from each edge. The thickness of the bracket will be 2mm.

Step 4: Extrude the first bracket sketch by selecting the Extruded Boss/Base tool. Enter 2mm as the extrude depth.

Step 5: Create a new sketch on the top plane of the first bracket.

Step 6: Draw a circle of 2.5mm diameter in the center of the new sketch and extrude it by 2mm.

Step 7: Now, select the bottom face of the first bracket and create a new sketch.

Step 8: Draw the second bracket sketch in the new sketch. The second bracket will be identical to the first bracket.

Step 9: Extrude the second bracket sketch by 2mm.

Step 10: Now, select the right face of the first bracket and create a new sketch.

Step 11: Draw the third bracket sketch in the new sketch. The third bracket will be identical to the first and second brackets.

Step 12: Extrude the third bracket sketch by 2mm.Step 13: Now, select the top face of the second bracket and create a new sketch.

Step 14: Draw a circle of 2.5mm diameter in the center of the new sketch and extrude it by 10mm.Step 15: Now, select the bottom face of the third bracket and create a new sketch.

Step 16: Draw a circle of 2.5mm diameter in the center of the new sketch and extrude it by 10mm.

Step 17: Now, insert two pins with 5mm diameter and 20mm length in the holes of the brackets.

Step 18: Finally, save the assembly.The assembly contains 3 machined brackets and 2 pins. The brackets have a thickness of 2mm and equal size holes through all material. The material used is 6061 alloy with a density of 0.0027g/mm3. The top edge of the notch is located 20mm from the top.

To know more about assembly visit:

brainly.com/question/29563444

#SPJ11

The property of muscle that gives it the ability to stretch without damage is c) extensibility.

Extensibility refers to the ability of muscle tissue to stretch or lengthen without being damaged.

This property allows muscles to adapt and respond to changes in movement and posture.

Muscles need to be able to elongate and stretch during activities such as stretching exercises, reaching for objects, or performing movements that require a wide range of motion.

The extensibility of muscles is important for maintaining flexibility and preventing injuries.

Learn more about extensibility

brainly.com/question/12937142

#SPJ11

Answer:

A.) P = 2bar, W = - 12kJ

B.) P = 0.8 bar, W = - 7.3 kJ

C.) P = 0.608 bar, W = - 6.4kJ

Explanation: Given that the relation between pressure and volume is

PV^n = constant.

That is, P1V1^n = P2V2^n

P1 = P2 × ( V2/V1 )^n

If the initial volume V1 = 0.1 m3,

the final volume V2 = 0.04 m3, and

the final pressure P2 = 2 bar. 

A.) When n = 0

Substitute all the parameters into the formula

(V2/V1)^0 = 1

Therefore, P2 = P1 = 2 bar

Work = ∫ PdV = constant × dV

Work = 2 × 10^5 × [ 0.04 - 0.1 ]

Work = 200000 × - 0.06

Work = - 12000J

Work = - 12 kJ

B.) When n = 1

P1 = 2 × (0.04/0.1)^1

P1 = 2 × 0.4 = 0.8 bar

Work = ∫ PdV = constant × ∫dV/V

Work = P1V1 × ln ( V2/V1 )

Work = 0.8 ×10^5 × 0.1 × ln 0.4

Work = - 7330.3J

Work = -7.33 kJ

C.) When n = 1.3

P1 = 2 × (0.04/0.1)^1.3

P1 = 0.6077 bar

Work = ∫ PdV

Work = (P2V2 - P1V1)/ ( 1 - 1.3 )

Work = (2×10^5×0.04) - (0.608 10^5×0.1)/ ( 1 - 1.3 )

Work = (8000 - 6080)/ -0.3

Work = -1920/0.3

Work = -6400 J

Work = -6.4 kJ

Answer:

a. Commutator:

the commutator reverses the current direction with each turn serving as a mechanical rectifier to convert the alternating current from the windings to unidirectional direct current in the external load circuit.

b. Armature core

Armature core is a physical structure made up of silicon steel stampings. The core is laminated to keep iron losses low. Armature winding is the main current carrying winding where we either provide(electric supply to motor) or extract e.m.f(collect electric power from generator).

c. Field system

The field winding basically form an electromagnet, that produces field flux within which the rotor armature of the DC motor rotates, and results in the effective flux cutting

d. Brushes

The function of brushes is that the brushes conduct current between stationary wires and moving parts of the electric Generator.

e. Armature winding

The winding wound on the core is given current through a DC supply. This current-carrying winding as under the influence of the magnetic field develops a force that develops a rotational torque. This torque enables the machine to rotate.

\( \bold \pink{ \underline{hope \: it \: helps}}\)

The components required to identify, analyze, and contain an incident may be defined as the incident response plan. An incident response plan specifies the actions to be taken by an organization's incident response team in the event of a security breach, cyber attack, or other disruptive event.

The plan typically includes procedures for detecting and reporting incidents, assessing their severity and impact, containing the incident to prevent further damage, and restoring normal operations as quickly as possible. It may also include communication protocols for keeping stakeholders informed and coordinating with external resources such as law enforcement or third-party service providers.

Learn more about  other disruptive event.   from

https://brainly.com/question/1558603

#SPJ11

The value returned as a result of the call scramble("compiler", 3) is pilercom.

The scramble method takes in a String word and an integer howFar. The method then returns a new string that is created by taking a substring of word starting from the index howFar+1 to the end of the string, and concatenating it with a substring of word from the beginning of the string to the index howFar.

In this case, word is "compiler" and howFar is 3. Therefore, the first substring starts at index 4 (i.e., howFar+1) and goes to the end of the string, which gives us "iler". The second substring starts at the beginning of the string and goes up to index 3 (i.e., howFar), which gives us "comp". Concatenating these two substrings gives us the final string "pilercom".

Learn more about scramble here:

https://brainly.com/question/28104861

#SPJ11

Answer:

c. pvc

Explanation:

All of the following may be bent using a mechanical bender except PVC. Thus, the correct option for this question is C.

A mechanical bender may be characterized as an instrument or tool that is significantly utilized in order to bend piping of different materials, such as copper and stainless steel, to form various angles and curves.

Objects like EMT, IMC, and rigid circuits are all bent by using the given instrument of the device. But PVC (polyvinyl chloride) is a type of pipe that can not be bent by a mechanical bender. This is because it has less flexibility and when you try to bend this from a mechanical bender, it is immediately broken.

Therefore, all of the following may be bent using a mechanical bender except PVC. Thus, the correct option for this question is C.

To learn more about a PVC conduit,  refer to the link:

https://brainly.com/question/2357341

#SPJ2

Answer:

20a=1000

Explanation:

The correct answer is Specific weight: w = [weight ÷ volume] = [9N ÷ 0.001m³] = 9000N/m³Density: w = [ × g] Where, g = acceleration due to gravity = 9.81m/sec². Specific gravity: G = [density of liquid ÷ density of water] As you know, The density of water = 1000kg/m³.

The density of a substance is divided by the density of water at 4 degrees Celsius to determine its specific gravity. The density of the substance and the density of the water must be represented in the same units for the calculation.distinguishes  While specific weight has dimensions, specific gravity is a dimensionless number. The gravitational field has no effect on a material's specific gravity, but it does have an effect on a material's specific weight. A substance's "Specific Gravity" is determined by dividing its mass by the mass of an equivalent volume of water at the same pressure and temperature.

To learn more about pecific gravity click the link below:

brainly.com/question/29496256

#SPJ4

Answer:

What force is requiere to move the cylinder along

Explanation:

The kinematic viscosity of the ol is 0.006 fr2

Answer:

i think 1 is c and im so sorry but i dont know whats the rest

Explanation:

The maximum number of different probe sequences for an open-addressing hash table of size m using linear probing is m.

In open-addressing hash tables with linear probing, when a collision occurs, the algorithm searches for the next available slot by linearly probing through the table until an empty slot is found. The number of different probe sequences is determined by the size of the hash table (m). Each slot in the table can be probed in a linear sequence until an empty slot is found, resulting in m different probe sequences.

Thus m, is the answer as it represents the maximum number of different probe sequences for an open-addressing hash table of size m using linear probing. The number of probe sequences is directly related to the size of the hash table, as each slot can potentially be probed during collision resolution.

You can learn more about hash table at

https://brainly.com/question/31686793

#SPJ11

Answer:

can you please give us the option for this question

Answer:

More Drag on the down going wing and More Lift on the up going wing

Explanation:

The autorotation spins of blades used in airborne wind energy technology sectors help drive and move the winds and water propeller-type turbines or shafts of generators to produce electricity at altitude and transmit the electricity to earth through conductive tethers.

Sometimes autorotation takes place in rotating parachutes, kite tails. Etc.

As a result, more Drag usually induces the autorotation spin characteristics of a straight-wing aircraft on the downgoing wing and More Lift on the up-going wing.

Portable and mounted suction units must be powerful enough to generate a vacuum of at least 300 mm Hg when the tubing is clamped.

When it comes to medical suction, a vacuum of at least 300 mm Hg is typically considered the minimum requirement for effective suctioning. This level of vacuum is necessary to ensure the efficient removal of fluids or secretions from the patient's airway or other areas during medical procedures. The tubing is clamped to create resistance and simulate the conditions where the suction unit needs to exert its maximum force.

By generating a vacuum of 300 mm Hg or higher, the suction unit can effectively remove fluids or obstructions, providing clear airways and maintaining patient safety. This level of suction power ensures that the unit can handle various suctioning tasks, from routine oral suctioning to more complex procedures where a stronger vacuum may be required.

Portable and mounted suction units need to meet this minimum vacuum requirement to ensure reliable and consistent performance in medical settings. By adhering to this standard, healthcare professionals can rely on these units to provide the necessary suction power for a wide range of medical procedures, promoting patient comfort and well-being.

For more questions on Vacuum

https://brainly.com/question/29242274

#SPJ11

Answer:

substance B

Explanation:

To determine a material requirement plan (MRP) at McDonald's and ensure uninterrupted service delivery, various factors need to be considered, including demand forecasting, bill of materials (BOM), inventory management, and the master production schedule (MPS).

1. Demand Forecasting: Analyze historical sales data, customer trends, and market insights to accurately forecast demand for various menu items.

2. Bill of Materials (BOM): Create a comprehensive BOM that lists all the ingredients and components required for each menu item, including quantities and specifications.

3. Inventory Management: Implement efficient inventory management practices, including real-time tracking, stock replenishment, and minimizing waste through accurate forecasting.

4. Master Production Schedule (MPS): Develop a detailed MPS that aligns production activities with demand, taking into account factors like lead times, production capacities, and delivery schedules.

5. Integration and Communication: Ensure seamless communication and coordination between different departments, suppliers, and franchise locations to maintain adequate inventory levels and timely procurement.

By effectively managing these inputs, McDonald's can optimize its material requirements and ensure uninterrupted service delivery, minimizing the risk of stockouts or excessive inventory.

Learn more about: requirement plan

brainly.com/question/29431904

#SPJ11

Assuming complementary inputs are available, the minimum number of transistors needed to realize a two input xor gate is 4.

If two inputs work well together in the production process, they are said to be complements. Since the inputs are used in fixed proportions, if the price of one input lowers, more of it will be sought after, increasing the demand for the other input.

In this study, a model of anticompetitive exclusive contracts with complimentary inputs is built. A downstream company converts a variety of complementary inputs into finished goods. When complementary input providers hold a dominant position in a specific input market, upstream competition price within that market benefits both the downstream firm and the complementary inputs providers by driving up complementary input prices.

Thus, even when entry that is socially optimal is permitted, the downstream firm is unable to generate higher profits. Therefore, even in the absence of scale economies, downstream competition, and relationship-specific investment, the inefficient incumbent provider can prevent socially efficient entrance by employing exclusive contracts.

To know more about complementary inputs click on the link:

https://brainly.com/question/13125554

#SPJ4

Answer:

True

Explanation:

It's just because of the processing

Answer:

Potential energy

Explanation:

"Potential energy" is a type of energy an object has when it's at rest or in this case not moving. The car is parked, and the engine is off, that means there is no electrical, kinetic, thermal, or mechanical energy in play since the engine isn't running and the car isn't moving. The radio is off too so that means there is no sound energy or electric energy (again) in play either. You are just parked with the car completely shut off, but you do have the potential to move the car by turning on the engine and start driving, which means potential energy is currently in use.

Hope this helps.

Sin 20 degrees has a value of 0.3420201. Sin (20° /180°), often known as sin (/9) or sin 20 degrees, is expressed in radians (0.349065. . .). With the use of examples, we will go over how to calculate sin 20 degrees in this post.

To Learn more about Sin 20 refer to :

https://brainly.com/question/28676555

#SPJ1

We can find the solution to the above differential equation using the integrating factor method. Integrating factor Let's find the integrating factor of the given differential equation, which is given by:$$I(x)=e^{-\int dx}$$where $$\int dx =x$$Therefore, the integrating factor is given by,$$I(x)=e^{-x}$$

Given, $$\frac{dy}{dx}-y=\frac{e^x}{x}$$where, $$y(e)=0$$. Multiplying throughout the equation by integrating factor Multiplying both sides of the given differential equation by the integrating factor $$I(x)=e^{-x}$$gives,$$\frac{d}{dx}(ye^{-x})=\frac{e^x}{x}e^{-x}$$Simplifying the above equation, we get, $$\frac{d}{dx}(ye^{-x})=\frac{1}{x}$$Integrating on both sides with respect to x, we get,$$ye^{-x}=\int \frac{1}{x} dx= ln|x|+ C_1$$where $$C_1$$ is an arbitrary constant. Multiplying by e^x on both sides

Multiplying both sides of the above equation by $$e^x$$ gives,$$y(x)=e^x\left(ln|x|+C_1\right)$$We know that the value of y(e)=0. Substituting the given values in the above equation,$$y(e)=e^e\left(ln|e|+C_1\right)$$$$\Rightarrow 0=e^e\left(1+C_1\right)$$Therefore,$$C_1=-1$$Thus, the solution to the given differential equation is $$y(x)=e^x(ln|x|-1)$$

For similar problems on differential equations using integrating factor visit:

https://brainly.com/question/32525459

#SPJ11

Answer:

15 000 000 Ohms

Explanation:

1 Mega Ohm = 1 000 000 Ohms

So,

15 Mega ohms =15 000 000 Ohms

very big question aa having i can't answer it

Again, the majority of automotive audio amplifiers should be able to be controlled by a switch certified at 10 amps or over.

An amplifier is a piece of electrical equipment that increases the voltage, current, or amplitude of a signal. Amplifiers are used in wireless communications, broadcast, and other audio equipment. They can be categorized as either power amplifiers or sluggish amplifiers.

Yes, speakers do play louder & clearer when the wattage is higher (watts). However, little changes in power don't result in a discernible difference in the sound. To noticeably hear a change, the wattage would have to be doubled (a 3dB increase).

To know more about Amplifier visit:

https://brainly.com/question/16795254

#SPJ4

Answer:

Both technician A and technician B are correct

Explanation:

A planetary gearbox consists of a gearbox with the input shaft and the output shaft that is aligned to each other. It is used to transfer the largest torque in the compact form. A planetary gearbox has a compact size and low weight and it has high power density.

One planetary gear set can provide gear reduction, overdrive, and reverse. Also, most transmissions today use compound (multiple) planetary gears set.

So, both technician A and technician B are correct.

The correct answer is option (C): 18862.5 J/kg

To determine the specific work done on the system, we can use Bernoulli's equation for steady, incompressible flow along a streamline. Neglecting the gravitational potential energy variation, Bernoulli's equation can be expressed as:

p/ρ + V²/2 = constant

Using Bernoulli's equation between the inlet and outlet ports of the control volume, the equation becomes:

p1/ρ + C1²/2 = p2/ρ + C2²/2 + L

Given the values of inlet pressure (P), inlet velocity (C), outlet pressure (Pout), outlet velocity (Cout), and viscous dissipations (L), we can substitute them into the equation and solve for L:

1/1000 + 5²/2 = 200/1000 + (-10)²/2 + L/1000

Simplifying the equation gives L = 1000 J/kg.

The specific work done on the system is calculated using the formula:

W = (Pout - P)/ρ + (Cout² - C²)/2 - L/ρ

Substituting the given values, we get:

W = (200 - 1)/1000 + ((-10)² - 5²)/2 - 1000/1000

Simplifying further, we find W = -3.5625 kJ/kg. Multiplying this by 1000, we obtain the specific work done on the system as 18862.5 J/kg.

Therefore, the correct option is (C) 18862.5 J/kg.

Learn more about specific work done on the system:

https://brainly.com/question/30531335

#SPJ11

Answer:

C

Explanation:

a. In single-sideband (SSB) amplitude modulation, only one sideband is transmitted, resulting in a bandwidth equal to the bandwidth of the original signal.

b. In double-sideband suppressed-carrier (DSB-SC) modulation, both sidebands are transmitted without the carrier.

c. In amplitude modulation (AM) with a modulation index of 0.6, both sidebands and the carrier are transmitted.

For more questions on bandwidth

https://brainly.com/question/31411262

#SPJ8