0.0% complete question a web server will utilize a directory protocol to enable users to authenticate with domain credentials. a certificate will be issued to the server to set up a secure tunnel. which protocol is ideal for this

The counter associated with a packet that increases by one each time the packet is copied is called the Time-To-Live (TTL) counter.

The TTL counter is a field in the header of an IP packet that specifies the maximum number of network hops that the packet can traverse before it is discarded. As the packet travels through the network, each router that forwards the packet decrements the TTL value by one. If the TTL reaches zero before the packet reaches its destination, the packet is discarded and an error message is sent back to the sender.

By limiting the number of hops that a packet can take, the TTL field helps prevent packets from circulating indefinitely in the network and consuming resources. The TTL counter also serves as a basic mechanism for congestion control, as it encourages packets to take the shortest path to their destination and avoid congested or slow-moving network segments.

You can learn more about packet at

https://brainly.com/question/29484548

#SPJ11

How does the Internet Work?

The Internet works through a packet routing network in accordance with the Internet Protocol (IP), the Transport Control Protocol (TCP) and other protocols.

Hope this helps you!

Explanation:

The internet is a worldwide computer network that transmits a variety of data and media across interconnected devices. It works by using a packet routing network that follows Internet Protocol (IP) and Transport Control Protocol (

An example of unnecessary debt is when you change your clothes and don't really need on a high-interest score. Thus option C is correct.

An unnecessary debt can be caused by a variety of issues such as expensive life events, having children, or moving to a new house. It may also be due to poor money management. The debt is due to those things that are not needed and hence are unnecessary.

Find out more information about unnecessary debt.

brainly.com/question/3566270

Answer:

charge it

Explanation:

Answer:

maybe cus u play alot⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀

Answer:

Pros and cons of workstation

There are some pros and cons of workstation that are explained below:-

Advantages of workstation

High performance:

This type of computers can give more performance than a normal computer. It is best suited for rendering complex graphics, financial analysis, and digital content creation.

Single user:

A single user can use this type of computer at a time and hence the speed of the system can be improved and there is no other user that can interfere with the performance.

Smart investment:

Investing in such computers is good because it increases our productivity and can do more work than the normal user can do. For example, if you want to edit any animation and then render it then it can be done rapidly.

Used in the entertainment and media sector:

These computers can perform best in entertainment sector where a lot of audio and video processing is needed. Also, such computers work great in the media sector where live broadcasting is done.

Reliability:

You can easily diagnose any problem in the workstation. The IT staff can repair your system if you get a blue screen, or workstation can become unresponsive. IT staff can attach keyboard, mouse, and video and identify the problem in the workstation even the workstation is off.

Large memory:

A workstation has a larger memory than a desktop PC. It has about twice the memory as compared to laptops, tablets, smartphone or other devices. By using larger memory it can do more work in a shorter time. There are nearly no errors in memory while performing any task.

Multiple processors support:

A workstation has multiple processors attached to it. By using multiprocessors you can run multiple applications at a time without any issue. Your system will not slow down by opening multiple applications. A workstation is used by professionals like engineers, scientists, analysts and designers.

Large hard drives and SSD:

A workstation has hard drives which can store terabytes of data so any type of job of any size can be stored in the hard drives. Additionally, SSD (Solid State Drives) are also attached in the workstation to speed up the overall performance of the system.

Easy to use:

The workstation has a large keyboard than a laptop and it is easy to use if you stay in one room.

Disadvantages of workstation

Portability:

It is difficult to move workstation from one place to another. On the other hand, if you use a laptop then you can move it easily from one place to another. For moving workstation, you have to plug out every time you plan to move.

Expensive:

Workstation is expensive than low capacity computers. The higher cost is because of higher RAM, hard drives and multiprocessor support.

High power usage:

The workstation uses more electricity than other devices like tablets, smartphone, laptops and desktop computers.

Examples of workstation

Some examples of the workstation are:-

Apple Power Mac G5

Hp Z series

Dell Precision

Sun Microsystems SparcStation

Silicon Graphics IRIX Machines

Apple Mac Pro

Apple Macbook Pro

Explanation:

If you want to apply a shape style, you must require to tap on the Format tab followed by clicking the More drop-down arrow in the Shape Styles group.

To know the actual or real style of shape, go to the Drawing Tools menu in the ribbon. Then, Click on the Format tab. Observe the Shape Styles grouping of commands. Here, you will see three icons on the right side, they are Shape Fill, Shape Outline, and Shape Effects.

After clicking the More drop-down arrow in the Shape Styles group, a complete menu of styles will appear in front of you on the screen. Choose the style you want to use. The shape will appear in the selected style.

Therefore, the process of applying shape style is well described above.

To learn more about Word Shape styles, refer to the link:

https://brainly.com/question/938171

#SPJ1

This question require to write a program which accept 4 doubles variable such as a,b,c and d and return 1 if the average of a,b, and c is greater than variable d. Otherwise, return false (0).

The required program is written in Python below:

def avg_eq(a,b,c,d):      # function is defined

   total = a+b+c               # total of a,b and c is calculated

   average = total/3      # average is calcuated of variables a,b, and c

   if average > d:            #if average is greater than d

      return 1                     # returns 1

   else:                           # otherwise returns zero.

       return 0

print(avg_eq(1,3,5,2))

print(avg_eq(2,3,4,4))

print(avg_eq(10,50,25,30))

print(avg_eq(123,987,42,300))       

The output of the program is also attached. The above code perform correct functionalities as required in the question.

You can learn more about function in python at

https://brainly.com/question/18521637

#SPJ4                                                  

Data storage and retrieval on storage media are covered by the logical perspective of a database.

Database records are the units of data organisation in a database. The segments that make up each database record are smaller collections of data. IMS can store data in units of segments alone.

Records are the name for the values that objects in a database can hold. The data that each record may include is then determined by the tables, which are used to store the records. Different records are found in different tables in a database. Records are frequently referred to as rows because they add new rows to the table whenever they are created.

To know more about Database visit:-

https://brainly.com/question/29412324

#SPJ4

Answer:Apple iOS. Apple's iOS is a popular operating system for smartphones. ...

Microsoft Windows. ...

Apple MAC OS. ...

Linux Operating System. ...

Real-Time Operating System. ...

Normal Operating System.

Explanation:

In a packet-switched network, without message segmentation, the time to move the entire 5 Mbit message from the source host to the first packet switch is determined by the link capacity of 10 Mbps. It takes 5 milliseconds to transmit the message.

When the message is segmented into 400 packets, each 20 kilobits long, the time to move the first packet from the source host to the first switch is still 5 milliseconds. The second packet will be fully received at the first switch when the first packet is being sent from the first switch to the second switch, resulting in no additional delay.

(a) Without message segmentation, the time to move the entire 5 Mbit message from the source host to the first packet switch can be calculated using the formula: Time = Message Size / Link Capacity. Here, the message size is 5 Mbits and the link capacity is 10 Mbps. Thus, the time to move the message is 5 milliseconds.

Since each switch in store-and-forward packet switching requires the complete packet to be received before forwarding, the total time to move the message from the source host to the destination host would also be 5 milliseconds, assuming there are no propagation, queuing, and processing delays.

(b) When the message is segmented into 400 packets, each 20 kilobits long, the time to move the first packet from the source host to the first switch remains the same as before, 5 milliseconds. This is because the link capacity and the packet size remain unchanged.

As for the second packet, it will be fully received at the first switch when the first packet is being sent from the first switch to the second switch. Since the link capacity is greater than the packet size, there is no additional delay for the second packet. This is because the transmission of the first packet does not affect the reception of subsequent packets as long as the link capacity is sufficient to handle the packet size.

Learn more about  packet-switched network here :

https://brainly.com/question/30756385

#SPJ11

The correct sequence of steps for making cement from the start (at the top) to the end is Extraction of Raw Materials, Crushing, Mixing, Burning, Grinding, and Packaging and Shipping, respectively.

Cement is a very vital commodity in the construction industry, and its production is significant because it requires a careful blending of materials to achieve a high-quality product.

Cement manufacturing is a step-by-step process that involves the blending of raw materials, grinding of the clinker, and the final stage of packing and shipping of the cement product.

Here are the steps for making cement in the correct sequence from the start to the end:

1. Extraction of Raw Materials:

2. Crushing:

3. Mixing:

4. Burning:

5. Grinding:

6. Packaging and Shipping:

Thus, the sequence of the correct steps for making cement from the start (at the top) to the end is Extraction of Raw Materials, Crushing, Mixing, Burning, Grinding, and Packaging and Shipping, respectively.

To know more about Extraction  visit:

https://brainly.com/question/13156055

#SPJ11

Answer:

Can you add more context to your question

Explanation:

You just stated that you needed help in edhesive for question 1, but whats the question asking bro? I can help you with it but tell me what the question is first.

Answer:

Web documents and web applications are hosted on dedicated computers known as web servers.

Answer:

it is asking for https response

Answer:

Correct answer is:

communicate the purpose of the code that follows it.

Explanation:

Let have a look at each option

comment should give the reader the background of the programmer.

Comments are unable to do so.

Be written on every line

No, it is not need as comment are useful only to explain difficult or complex part of code.

communicate the purpose of the code that follows it.

yes, this option is true, as comments will give hints to programmer about the piece of code.

give information about how many hours it took to write the code

No, comments can answer it,

Answer:

c.

Explanation:

Answer:

the difference is one is online and one is not

Explanation:

A file is usually what you find online. And a folder is what you put papers into.

Answer:

Parallel circuit

Explanation:

When lights are in parrel circuit, a good example is the Christmas lights, each of the light has its own circuit connected to the power source. Such that as on of the light filaments gets burnt, it will have no effect on the other lights since they continue to be in a closed circuit, each on its own with the source of power.

The type of NAT that maps a single inside local address to a single inside global address is known as static NAT.

Static NAT establishes a permanent mapping between a private (inside local) IP address and a public (inside global) IP address. This mapping remains constant, allowing incoming traffic to be directed to a specific internal host based on the configured translation.

Static NAT is commonly used in scenarios where a particular internal resource, such as a server or a device, needs to be accessible from the external network with a dedicated public IP address. By using static NAT, a one-to-one correspondence is maintained between the internal and external addresses, ensuring that each internal address is consistently translated to a specific external address.

Static NAT is beneficial for applications or services that require a fixed, publicly accessible IP address, as it enables direct communication without any translation or sharing of IP addresses.

To learn more about static NAT visit : https://brainly.com/question/30074661

#SPJ11

Answer:

B. The result of computational thinking is a problem broken down into its parts to create a generalized model and possible solutions.  

C. Computational thinking involves the techniques of decomposition, pattern recognition, abstraction, and algorithm development.

E. Computational thinking is a set of techniques used to help solve complex problems or understand complex systems.

Explanation:

I just got it correct.

Using the knowledge of computational language in JAVA it is possible to write a code that  input N numbers from the user in a Single Dimensional Array .

class GFG {

   // Function to reverse a number n

   static int reverse(int n)

   {

       int d = 0, s = 0;

       while (n > 0) {

           d = n % 10;

           s = s * 10 + d;

           n = n / 10;

       }

       return s;

   }

   // Function to check if a number n is

   // palindrome

   static boolean isPalin(int n)

   {

       // If n is equal to the reverse of n

       // it is a palindrome

       return n == reverse(n);

   }

   // Function to calculate sum of all array

   // elements which are palindrome

   static int sumOfArray(int[] arr, int n)

   {

       int s = 0;

       for (int i = 0; i < n; i++) {

           if ((arr[i] > 10) && isPalin(arr[i])) {

               // summation of all palindrome numbers

               // present in array

               s += arr[i];

           }

       }

       return s;

   }

   // Driver Code

   public static void main(String[] args)

   {

       int n = 6;

       int[] arr = { 12, 313, 11, 44, 9, 1 };

       System.out.println(sumOfArray(arr, n));

   }

}

See more about JAVA at brainly.com/question/12975450

#SPJ1

Answer:

I'm not sure what this means by Hope you have a great day :)

Answer:

An important role to follow when learning is to ask questions.

Answer:

Explanation:

Answer:

That's tough...

Explanation:

Answer:

ok and?

Explanation:

This is not a question

Answer:

# determine if 'e' or 'E' Is contained in string s

def contains_e(s):

   return 'e' in s.lower()

# count number of e's (upper or lower case) in string s
def count_e(s):

   return s.lower().count('e')

Explanation:

There is no indexOf() method in Python. indexOf method is in Java

In Python you use the in operator to determine if a substring exists in a string. That's what I have used

Answer:

5 Hubs

Explanation:

Only up to 5 hubs you can have connected without problems.

def first_character(txt):

   return txt[0]

def all_but_first_character(txt):

   return txt[1::]

print(first_character("hello"))

print(all_but_first_character("hello"))

I wrote my code in python 3.8. I hope this helps.

Following are the Program to the given question:

Program Explanation:

Program:

def first_character(t):#defining a method first_character that takes a string variable in parameter

  return t[0]#using return keyword that return first character of string

def all_but_first_character(t):#defining a method all_but_first_character that takes a string variable in parameter

  return t[1::]#using return keyword that return string except first character

print(first_character("hello"))#calling method

print(all_but_first_character("hello"))#calling method

Output:

Please find the attached file.

Learn more:

brainly.com/question/19168392

The two primary methods of detection are signature-based and anomaly-based. Any type of IDS (HIDS or NIDS) can detect attacks based on signatures, anomalies, or both. The HIDS monitors the network traffic reaching its NIC, and the NIDS monitors the traffic on the network.